arXiv Science⌕ Search

arXiv subjects

Francesca Incalza

Publications and source records attributed to Francesca Incalza.

7 recordsLinked to original sources

Radiation Response of NbN Superconducting Nanowire Single-Photon Detectors Under $^{210}$Po Alpha-Particle Irradiation

Superconducting nanowire single-photon detectors (SNSPDs) are attractive for space applications because they combine high detection efficiency, low noise, and fast timing, but their radiation tolerance remains less established than that of conventional semiconductor detectors. Here we study NbN SNSPDs exposed to alpha-particle $^{210}$Po irradiation by combining cryogenic electrical and photon-counting measurements with SRIM and Geant4 radiation-transport calculations. For the estimated fluence corresponding to the 200-hour $^{210}$Po exposure, the air-inclusive Geant4 calculation predicts an average ionizing dose of 8.49 Mrad in the active NbN layer and a displacement-damage estimate of $5.67 \times 10^{-7}$ displacements per atom. Measurements before and after irradiation show no systematic degradation of the superconducting transition, switching current, retrapping current, dark-count behavior, or photon-count response. These results indicate radiation resilience of thin-film NbN SNSPDs under a multi-Mrad alpha-particle exposure and support their use in photon-counting systems for radiation environments.

physics.app-ph↗

High-resolution top-down nanopatterning of NbN thin films for superconducting metamaterials

Periodic nanopatterning offers a route to tailoring vortex motion and the electromagnetic response of superconducting films, providing a basis for superconducting metamaterials. Here, we report a high-resolution top-down nanopatterning process for ultrathin epitaxial NbN films on sapphire substrates. Electron-beam lithography using hydrogen silsesquioxane (HSQ) and ZEP 530A resists was optimized through proximity-effect correction and adhesion-layer integration. Dense superconducting nanowire grids with pitches down to 70 nm were fabricated, alongside millimeter-square areas patterned with 100-nm-pitch hole arrays with high pattern fidelity. A thin Si capping layer was found to significantly improve HSQ adhesion on epitaxial NbN. The nanopatterns were successfully transferred into 5-nm-thick NbN films by reactive ion etching (RIE). Structural and dimensional characterization was performed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM), enabling cross-validation of nanoscale feature dimensions and etch quality. Electrical transport measurements reveal periodic resistance minima and switching-current oscillations at magnetic fields set by the hole-array pitch, consistent with enhanced vortex pinning when the vortex configuration matches the patterned lattice. Cryogenic THz time-domain spectroscopy further reveals a reduced superfluid density in the nanopatterned region relative to pristine NbN, while both regions have a spectroscopic superconducting transition near 14 K. These results establish a robust fabrication platform for superconducting nanopatterns targeting vortex pinning, metamaterials, and quantum-device applications.

cond-mat.supr-con↗

Establishing Standards for Assessment and Reporting of SNSPD Performance

Superconducting nanowire single-photon detectors (SNSPDs) can be made sensitive to single photons with near-unity detection efficiency, ultra-low dark-count rates, and sub-nanosecond timing jitter over a broad wavelength range. However, many studies report data inconsistently, often emphasizing a single performance metric without considering overall device performance. This inconsistent data reporting limits the field, as it makes it difficult to determine which device characteristics are most important. Different applications require functionalities that may conflict with one another; for example, longer-wavelength operation may require lower operating temperatures. Moreover, there is no universally accepted metric for defining the figures of merit of an SNSPD. In this work, we amass a dataset representing the state of the art of SNSPD fabrication, including operating temperature, operating wavelength, photon count rates (PCR), and dark count rates (DCR). We fit the PCR curves and suggest using the saturation plateau length to gauge the SNSPD's sensitivity. We then fit the DCR and compare the PCR and DCR. Using this approach, we establish a quantitative framework to determine the optimal biasing condition for a given device and to determine the device's sensitivity at that optimal biasing condition, enabling meaningful comparisons across disparate devices. Additionally, we offer concrete benchmarks for measuring device performance.

physics.ins-det↗

Reconfigurable Superconducting Logic for On-Chip Photon Coincidence Detection

Scaling photonic quantum-information platforms requires arrays of superconducting nanowire single-photon detectors (SNSPDs) for feedforward control, in which optical operations are conditioned on Bell-state measurements relying on photon-coincidence detections. On-chip superconducting cryotron electronics, performing logic on detector outputs and driving optical modulators, could reduce latency and room-temperature interconnect complexity for feedforward schemes. To date, no cryotron circuits designed for this purpose have been demonstrated. We demonstrate a bias-programmable logic gate based on three nanocryotrons (nTrons) that implements selectable AND (coincidence), XOR (odd-parity), and OR functions. It operates on two electrical pulses at 4.2 K, with bit-error rates below $10^{-3}$, bias margins up to $\pm21.7\%$, and operation extending to 25 MHz over narrower bias windows. It performs coincidence and odd-parity detection on two SNSPDs' outputs with bit-error rates below $3.2 \times 10^{-2}$. As proof-of-concept, we show that nTrons can drive capacitive loads up to 1.15 V, potentially enabling compatibility with electro-optic modulators in feedforward schemes.

physics.app-ph↗

Fast-Recovery Epitaxial NbN Superconducting Nanowire Single-Photon Detectors with Saturated Efficiency at 1550 nm in Liquid Helium

Achieving both high internal efficiency and fast reset times at elevated temperatures remains challenging due to limited understanding of how film properties govern SNSPD performance. We demonstrate that epitaxial NbN films on sapphire enable simultaneous high efficiency and rapid response. We fabricate and characterize SNSPDs based on these films deposited via DC magnetron sputtering on c-cut sapphire. High-quality epitaxial growth preserves a low electron diffusion coefficient and promotes strong electron-phonon coupling, yielding a high critical temperature and efficient hotspot formation in the dirty limit. X-ray diffraction and transmission electron microscopy confirm epitaxial alignment and lattice order. Nanowires of 20 nm width exhibit saturated internal efficiency at 1550 nm wavelength and short reset times at 4.2 K, enabled by lattice matching and high thermal conductance of the sapphire interface. Ab initio modeling reproduces photon count rates, linking device performance quantitatively to film properties such as diffusivity and electron-phonon coupling.

physics.app-ph↗

Scalable Superconducting Nanowire Memory Array with Row-Column Addressing

Developing ultra-low-energy superconducting computing and fault-tolerant quantum computing will require scalable superconducting memory. While conventional superconducting logic-based memory cells have facilitated early demonstrations, their large footprint poses a significant barrier to scaling. Nanowire-based superconducting memory cells offer a compact alternative, but high error rates have hindered their integration into large arrays. In this work, we present a superconducting nanowire memory array designed for scalable row-column operation, achieving a functional density of 2.6$\,$Mb/cm$^{2}$. The array operates at $1.3\,$K, where we implement and characterize multi-flux quanta state storage and destructive readout. By optimizing write and read pulse sequences, we minimize bit errors while maximizing operational margins in a $4\times 4$ array. Circuit-level simulations further elucidate the memory cell's dynamics, providing insight into performance limits and stability under varying pulse amplitudes. We experimentally demonstrate stable memory operation with a minimum bit error rate of $10^{-5}$. These results suggest a promising path for scaling superconducting nanowire memories to high-density architectures, offering a foundation for energy-efficient memory in superconducting electronics.

physics.app-ph↗

Ab initio modeling of nonequilibrium dynamics in superconducting detectors and qubits

Nonequilibrium quasiparticle (QP) and phonon dynamics are central to the operation of superconducting devices. Superconducting detectors, such as the superconducting nanowire single-photon detector, perform best when a large QP population is generated in response to small perturbations. Conversely, for superconducting qubits and topologically protected Majorana fermions, even relatively small QP densities can lead to significant performance degradation, and thus, ideal materials are less susceptible to QP poisoning. However, existing models of these devices lack a rigorous description of the QP and phonon dynamics, relying on approximations and phenomenology. In this article, we combine kinetic equations with density functional theory to model the nonequilibrium dynamics of a superconducting film ab initio. To demonstrate the universality of our model, we illustrate two examples: (1) we develop a model for the detection of single photons in superconducting nanowires, and (2) we calculate the energy-relaxation rate of a transmon qubit due to the presence of excess QPs. Our examples demonstrate from first principles that NbN is well-suited for single-photon detection and that Ta transmon qubits possess reduced sensitivity to QP poisoning relative to other materials, which is likely in part responsible for their longer coherence times. In contrast to previous models, our ab initio approach makes these predictions without experimental input and thus can be used to accelerate progress in device development. Moreover, by considering the full-bandwidth electron-phonon coupling, our approach can incorporate strong-coupling effects. Our methods effectively integrate ab initio materials modeling with nonequilibrium theory of superconductivity to perform practical modeling of superconducting devices, providing a comprehensive approach that connects fundamental theory with device applications.

cond-mat.supr-con↗