arXiv subjects

Florian Meyer

Publications and source records attributed to Florian Meyer.

At least 19 recordsLinked to original sources

arXiv2026

Bridging Echolocation Gaps in Automated Beaked Whale Tracking

Passive acoustic monitoring (PAM) is an effective and widely used tool for tracking marine mammals, particularly beaked whales, which are infrequently observed visually because of their deep-diving behavior. However, the large data sets generated by PAM methods often require time-consuming hand labeling to identify whale trajectories in the recorded audio. Automated multi-target tracking (MTT) methods could significantly reduce human workload, but current methods have difficulty forming continuous tracks because of the irregularity of beaked whale echolocation clicks. More precisely, regular sequences of clicks are often interrupted by longer pauses that occur when whales face away from the sensors or stop clicking. Consequently, the probability of detection is difficult to model accurately, and MTT trajectories become fragmented at these pauses. In this paper, we propose a multistage target-estimation method aimed at bridging large gaps in click sequences by combining belief propagation-based MTT with track smoothing and stitching. We validate our method using acoustic recordings of clicks from goose-beaked whales (Ziphius cavirostris), and demonstrate that it improves track estimates and reduces fragmentation in the presence of consecutive missed detections. When evaluated with the generalized optimal subpattern assignment (GOSPA) metric, our method outperforms existing MTT reference methods through reductions in missed-target errors.

eess.SP↗

arXiv2026

Moment-Matching Probabilistic Data Association for Optimization-Based SLAM

Optimization-based simultaneous localization and mapping (SLAM) makes it possible to reduce accumulated navigation errors of sensing platforms by returning to known areas (loop closure). In this paper, we present an approach to combine probabilistic data association (PDA) with optimization-based SLAM. Instead of associating a single measurement with each landmark, we follow the PDA paradigm from the multiobject tracking community. In particular, in a processing stage performed in addition to the nonlinear least-squares solver of optimization-based SLAM, our method (i) assigns multiple measurements to landmarks probabilistically, (ii) computes the mean and covariance of landmark distributions via moment matching by taking multiple measurement-to-landmark associations into account, and (iii) establishes a virtual landmark measurement and a corresponding linear-Gaussian measurement model that leads to the mean and covariance matrix as moment-matching PDA in (ii). By converting the PDA update step into an equivalent linear-Gaussian measurement update step, PDA can be performed effectively within any optimization-based SLAM method. Our preliminary numerical evaluation in a scenario with false negatives and false positives indicates that incremental smoothing and mapping 2 (iSAM2), combined with the proposed PDA approach, can improve agent localization performance compared to conventional iSAM2.

cs.RO↗

arXiv2026

Gaussian Belief Propagation for Tracking With Unresolved Measurements

Unresolved measurements occur in many inference problems where two or more hidden processes may, at times, jointly generate a single measurement. For instance, such phenomena are encountered in multiobject tracking owing to the limited resolution capabilities of practical sensors; or in camera-aided autonomous driving due to shadowing or occlusions. Substantial performance degradation, such as track losses, are incurred when unresolved measurements are not accounted for. In this paper, we address multiobject tracking under a generalized unresolved measurement model, where any subset of objects may generate a single unresolved measurement according to a probabilistic model. Our innovation lies both in modeling and algorithm-design directions. First, we develop a probability distribution for object partitions based on a model of pairwise coupling of objects and subsequently a probability distribution for object-to-measurement association variables. This generic model incorporates sensor resolution capabilities, sensor detection, and sensor noise characteristics for object groups. Second, a generic Loopy Belief Propagation (LBP) method as well as a specialized Gaussian-LBP (GLBP) algorithm are proposed that perform object state inference under the aforementioned model. In contrast to direct marginalization methods, which involve a computational complexity of $O(m^n)$, for $m$ measurements and $n$ objects, the proposed GLBP algorithm achieves a computational complexity on the order of $O(m n 2^{n})$. Numerical results demonstrate the effectiveness of our proposed GLBP, with estimation performance that closely matches that of exact marginalization for only a fraction of the computational resources.

cs.IT↗

arXiv2026

Probabilistic Occupancy Grid for Radio-Based SLAM

Sensing is an integral part of 6G and beyond systems, providing exceptional environmental perception along with communication. Radio frequency (RF)-based sensing often relies on simplified geometric assumptions (e.g., point scatterers or planar surfaces) to model specular multipath and keep inference tractable. However, such representations are limited in their ability to capture extended objects with complex geometries and properties. This paper presents a probabilistic occupancy grid framework for radio-based simultaneous localization and mapping (SLAM), jointly reconstructing geometric structures and their RF-related properties. The proposed occupancy grid map representation is integrated into a multipath-based SLAM formulation to enable simultaneous mobile-agent localization and environment mapping using multipath measurements. To connect RF measurements with the grid map, a surface model is employed to describe candidate reflection paths, while occupancy grid cell states capture measurement uncertainties and fine-grained geometric details. RF-related object properties are represented through reflection coefficients. The proposed framework offers a principled, proof-of-concept approach to physically interpretable radio-based mapping, and simulation results demonstrate accurate reconstruction of geometry and material properties, as well as high-accuracy localization. In addition, the results highlight the potential to use prior occupancy maps obtained from other radio devices or complementary sensors for subsequent map extension and refinement.

eess.SP↗

arXiv2025

Adaptive Multipath-Based SLAM for Distributed MIMO Systems

Localizing users and mapping the environment using radio signals is a key task in emerging applications such as low-latency communications and safety-critical navigation. Recently introduced multipath-based SLAM methods can jointly localize a mobile agent and map reflective surfaces in radio frequency (RF) environments. Most existing methods assume that map features and their corresponding RF propagation paths are statistically independent. This assumption neglects inherent dependencies that arise when a single reflective surface contributes to multiple propagation paths or when an agent communicates with multiple base stations. Existing approaches that aim to fuse information across propagation paths are further limited by their inability to perform ray tracing in RF environments with nonconvex geometries. In this paper, we propose a Bayesian multipath-based SLAM method for distributed MIMO systems that addresses these limitations. We exploit amplitude statistics to establish adaptive, time-varying detection probabilities. Based on the resulting 'soft' ray-tracing strategy, the proposed method can fuse information across propagation paths in RF environments with nonconvex geometries. A Bayesian estimation framework for the joint estimation of map features and agent state is developed by applying the message passing rules of the sum-product algorithm to a factor graph representation of the proposed statistical model. We further introduce a new initialization procedure for reflective surfaces that enables the introduction of new surface states even when measurements arise solely from double-bounce paths. The proposed method is validated using both synthetic and real RF measurements obtained in challenging scenarios with nonconvex geometries and OLoS conditions. The results demonstrate that it provides accurate localization and mapping performance and approaches the posterior CRLBs.

eess.SP↗

arXiv2025

Posterior Cram\'er-Rao Bounds on Localization and Mapping Errors in Distributed MIMO SLAM

Radio-frequency simultaneous localization and mapping (RF-SLAM) methods jointly infer the position of mobile transmitters and receivers in wireless networks, together with a geometric map of the propagation environment. An inferred map of specular surfaces can be used to exploit non-line-of-sight components of the multipath channel to increase robustness, bypass obstructions, and improve overall communication and positioning performance. While performance bounds for user location are well established, the literature lacks performance bounds for map information. This paper derives the mapping error bound (MEB), i.e., the posterior Cram\'er-Rao lower bound on the position and orientation of specular surfaces, for RF-SLAM. In particular, we consider a very general scenario with single- and double-bounce reflections, as well as distributed anchors. We demonstrate numerically that a state-of-the-art RF-SLAM algorithm asymptotically converges to this MEB. The bounds assess not only the localization (position and orientation) but also the mapping performance of RF-SLAM algorithms in terms of global features.

eess.SP↗

arXiv2025

Bayesian Multiobject Tracking With Neural-Enhanced Motion and Measurement Models

Multiobject tracking (MOT) is an important task in applications including autonomous driving, ocean sciences, and aerospace surveillance. Traditional MOT methods are model-based and combine sequential Bayesian estimation with data association and an object birth model. More recent methods are fully data-driven and rely on the training of neural networks. Both approaches offer distinct advantages in specific settings. In particular, model-based methods are generally applicable across a wide range of scenarios, whereas data-driven MOT achieves superior performance in scenarios where abundant labeled data for training is available. A natural thought is whether a general framework can integrate the two approaches. This paper introduces a hybrid method that utilizes neural networks to enhance specific aspects of the statistical model in Bayesian MOT that have been identified as overly simplistic. By doing so, the performance of the prediction and update steps of Bayesian MOT is improved. To ensure tractable computation, our framework uses belief propagation to avoid high-dimensional operations combined with sequential Monte Carlo methods to perform low-dimensional operations efficiently. The resulting method combines the flexibility and robustness of model-based approaches with the capability to learn complex information from data of neural networks. We evaluate the performance of the proposed method based on the nuScenes autonomous driving dataset and demonstrate that it has state-of-the-art performance.

cs.LG↗

arXiv2025

Message Passing for Track-Before-Detect

Accurately tracking an unknown and time-varying number of objects in complex environments is a significant challenge but a fundamental capability in a variety of applications, including applied ocean sciences, surveillance, autonomous driving, and wireless communications. Conventional Bayesian multiobject tracking (MOT) methods typically employ a detect-then-track (DTT) approach, where a frontend detector preprocesses raw sensor data to extract measurements for MOT. The irreversible nature of this preprocessing step can discard valuable object-related information, particularly impairing the ability to resolve weak or closely spaced objects. The track-before-detect (TBD) paradigm offers an alternative by operating directly on sensor data. However, existing TBD approaches introduce simplifications to facilitate the development of inference methods, such as assuming known signal amplitudes or conditional independence between sensor measurements given object states. These assumptions can lead to suboptimal performance and limit the applicability of the resulting TBD methods in realistic scenarios. This paper introduces a novel TBD method that is based on a comprehensive signal model for sensor data. The new model accounts for sensor data correlations and amplitude fluctuations, enabling the accurate representation of the physics of the data-generating process in TBD. The proposed model is suitable for a wide range of problems in active and passive radar, active and passive sonar, as well as integrated sensing and communication systems. Based on a factor graph representation of the new measurement model, a scalable belief propagation (BP) method is developed to perform efficient Bayesian inference. Experimental results, performed with both synthetic and real data, demonstrate that the proposed method outperforms state-of-the-art conventional MOT methods.

eess.SP↗

arXiv2025

Statistical Model and Estimation Method for Ranging a Moving Ship Using a Single Acoustic Receiver in Shallow Water

Passive acoustics is a versatile tool for maritime situational awareness, enabling applications such as source detection and localization, marine mammal tracking, and geoacoustic inversion. This study focuses on estimating the range between an acoustic receiver and a transiting ship in an acoustically range-independent shallow water environment. Here, acoustic propagation can be modeled by a set of modes that are determined by the shallow water waveguide and seabed characteristics. These modes are dispersive, with phase and group velocities varying with frequency, and their interference produces striation patterns that depend on range and frequency in single-hydrophone spectrograms. These striation patterns can often be characterized by the waveguide invariant (WI), a single parameter describing the waveguide's properties. This paper presents a statistical model and corresponding WI-based range estimation approach using a single hydrophone, leveraging broadband and tonal sounds from a transiting ship. Using data from the Seabed Characterization Experiment 2017 (SBCEX17), the method was evaluated on two commercial ships under different environmental conditions and frequency bands. Range estimation errors remained below 4 % up to 62 km in the best case, with robust performance demonstrated in the 40-60 Hz band.

eess.SP↗

arXiv2025

Association-Based Track-Before-Detect with Object Contribution Probabilities

Multiobject tracking provides situational awareness that enables new applications for modern convenience, applied ocean sciences, public safety, and homeland security. In many multiobject tracking applications, including radar and sonar tracking, after coherent prefiltering of the received signal, measurement data is typically structured in cells, where each cell represent, e.g., a different range and bearing value. While conventional detect-then-track (DTT) multiobject tracking approaches convert the cell-structured data within a detection phase into so-called point measurements in order to reduce the amount of data, track-before-detect (TBD) methods process the cell-structured data directly, avoiding a potential information loss. However, many TBD tracking methods are computationally intensive and achieve a reduced tracking accuracy when objects interact, i.e., when they come into close proximity. We here counteract these difficulties by introducing the concept of probabilistic object-to-cell contributions. As many conventional DTT methods, our approach uses a probabilistic association of objects with data cells, and a new object contribution model with corresponding object contribution probabilities to further associate cell contributions to objects that occupy the same data cell. Furthermore, to keep the computational complexity and filter runtimes low, we here use an efficient Poisson multi-Bernoulli filtering approach in combination with the application of belief propagation for fast probabilistic data association. We demonstrate numerically that our method achieves significantly increased tracking performance compared to state-of-the-art TBD tracking approaches, where performance differences are particularly pronounced when multiple objects interact.

eess.SP↗

arXiv2025

A Landmark-Aided Navigation Approach Using Side-Scan Sonar

Cost-effective localization methods for Autonomous Underwater Vehicle (AUV) navigation are key for ocean monitoring and data collection at high resolution in time and space. Algorithmic solutions suitable for real-time processing that handle nonlinear measurement models and different forms of measurement uncertainty will accelerate the development of field-ready technology. This paper details a Bayesian estimation method for landmark-aided navigation using a Side-scan Sonar (SSS) sensor. The method bounds navigation filter error in the GPS-denied undersea environment and captures the highly nonlinear nature of slant range measurements while remaining computationally tractable. Combining a novel measurement model with the chosen statistical framework facilitates the efficient use of SSS data and, in the future, could be used in real time. The proposed filter has two primary steps: a prediction step using an unscented transform and an update step utilizing particles. The update step performs probabilistic association of sonar detections with known landmarks. We evaluate algorithm performance and tractability using synthetic data and real data collected field experiments. Field experiments were performed using two different marine robotic platforms with two different SSS and at two different sites. Finally, we discuss the computational requirements of the proposed method and how it extends to real-time applications.

cs.RO↗

arXiv2025

An Approach of Directly Tracking Multiple Objects

In conventional approaches for multiobject tracking (MOT), raw sensor data undergoes several preprocessing stages to reduce data rate and computational complexity. This typically includes coherent processing that aims at maximizing the signal-to-noise ratio (SNR), followed by a detector that extracts "point" measurements, e.g., the range and bearing of objects, which serve as inputs for sequential Bayesian MOT. While using point measurements significantly simplifies the statistical model, the reduced data rate can lead to a loss of critical, object-related information and, thus, potentially to reduced tracking performance. In this paper, we propose a direct tracking approach that avoids a detector and most preprocessing stages. For direct tracking, we introduce a measurement model for the data-generating process of the sensor data, along with state-transition and birth models for the dynamics and the appearance and disappearance of objects. Based on the new statistical model, we develop a factor graph and particle-based belief propagation (BP) method for efficient sequential Bayesian estimation. Contrary to the track-before-detect (TBD) paradigm which also avoids a detector, direct tracking integrates coherent processing within the Bayesian MOT framework. Numerical experiments based on a passive acoustic dataset demonstrate that the proposed direct approach outperforms state-of-the-art conventional methods that rely on multiple preprocessing stages.

eess.SP↗

arXiv2024

Importance Sampling With Stochastic Particle Flow and Diffusion Optimization

Particle flow (PFL) is an effective method for overcoming particle degeneracy, the main limitation of particle filtering. In PFL, particles are migrated towards regions of high likelihood based on the solution of a partial differential equation. Recently proposed stochastic PFL introduces a diffusion term in the ordinary differential equation (ODE) that describes particle motion. This diffusion term reduces the stiffness of the ODE and makes it possible to perform PFL with a lower number of numerical integration steps compared to traditional deterministic PFL. In this work, we introduce a general approach to perform importance sampling (IS) based on stochastic PFL. Our method makes it possible to evaluate a "flow-induced" proposal probability density function (PDF) after the parameters of a Gaussian mixture model (GMM) have been migrated by stochastic PFL. Compared to conventional stochastic PFL, the resulting processing step is asymptotically optimal. Within our method, it is possible to optimize the diffusion matrix that describes the diffusion term of the ODE to improve the accuracy-computational complexity tradeoff. Our simulation results in a highly nonlinear 3-D source localization scenario showcase a reduced stiffness of the ODE and an improved estimating accuracy compared to state-of-the-art deterministic and stochastic PFL.

eess.SP↗

arXiv2024

A New Statistical Model for Waveguide Invariant-Based Range Estimation in Shallow Water

Navigation and source localization in the undersea environment are challenged by the absence of a ubiquitous positioning system. Passive acoustic ranging offers a valuable means of obtaining location information underwater. We present a range estimation method based on waveguide invariant (WI) theory, using ship noise recorded by a hydrophone as an acoustic source. The WI is a scalar parameter that describes the interference patterns in spectrograms caused by the interaction of acoustic wave modes propagating in a waveguide, such as shallow water. WI theory enables ranging using a single receiver without detailed knowledge of the environment. In this paper, underwater acoustic signals radiated by a moving large ship, which include broadband and tonal components, are employed for WI-based ranging in a range-independent shallow water environment. In particular, we develop a likelihood function for WI-based range estimation by introducing a statistical model for high signal-to-noise ratio scenarios. Here, the broadband component is assumed to dominate the background noise. The effectiveness of the proposed range estimation method is demonstrated using real acoustic measurements of a moving container ship recorded during the Seabed Characterization Experiment 2017 (SBCEX17).

eess.SP↗

arXiv2024

A New Architecture for Neural Enhanced Multiobject Tracking

Multiobject tracking (MOT) is an important task in robotics, autonomous driving, and maritime surveillance. Traditional work on MOT is model-based and aims to establish algorithms in the framework of sequential Bayesian estimation. More recent methods are fully data-driven and rely on the training of neural networks. The two approaches have demonstrated advantages in certain scenarios. In particular, in problems where plenty of labeled data for the training of neural networks is available, data-driven MOT tends to have advantages compared to traditional methods. A natural thought is whether a general and efficient framework can integrate the two approaches. This paper advances a recently introduced hybrid model-based and data-driven method called neural-enhanced belief propagation (NEBP). Compared to existing work on NEBP for MOT, it introduces a novel neural architecture that can improve data association and new object initialization, two critical aspects of MOT. The proposed tracking method is leading the nuScenes LiDAR-only tracking challenge at the time of submission of this paper.

eess.SP↗

arXiv2024

Direct Multipath-Based SLAM

In future wireless networks, the availability of information on the position of mobile agents and the propagation environment can enable new services and increase the throughput and robustness of communications. Multipath-based simultaneous localization and mapping (SLAM) aims at estimating the position of agents and reflecting features in the environment by exploiting the relationship between the local geometry and multipath components (MPCs) in received radio signals. Existing multipath-based SLAM methods preprocess received radio signals using a channel estimator. The channel estimator lowers the data rate by extracting a set of dispersion parameters for each MPC. These parameters are then used as measurements for SLAM. Bayesian estimation for multipath-based SLAM is facilitated by the lower data rate. However, due to finite resolution capabilities limited by signal bandwidth, channel estimation is prone to errors and MPC parameters may be extracted incorrectly and lead to a reduced SLAM performance. We propose a multipath-based SLAM approach that directly uses received radio signals as inputs. A new statistical model that can effectively be represented by a factor graph is introduced. The factor graph is the starting point for the development of an efficient belief propagation (BP) method for multipath-based SLAM that avoids data preprocessing by a channel estimator. Numerical results based on synthetic and real data in challenging single-input, single-output (SISO) scenarios demonstrate that the proposed method outperforms conventional methods in terms of localization and mapping accuracy.

eess.SP↗

arXiv2024

Particle Flows for Source Localization in 3-D Using TDOA Measurements

Localization using time-difference of arrival (TDOA) has myriad applications, e.g., in passive surveillance systems and marine mammal research. In this paper, we present a Bayesian estimation method that can localize an unknown number of static sources in 3-D based on TDOA measurements. The proposed localization algorithm based on particle flow (PFL) can overcome the challenges related to the highly nonlinear TDOA measurement model, the data association (DA) uncertainty, and the uncertainty in the number of sources to be localized. Different PFL strategies are compared within a unified belief propagation (BP) framework in a challenging multisensor source localization problem. In particular, we consider PFL-based approximation of beliefs based on one or multiple Gaussian kernels with parameters computed using deterministic and stochastic flow processes. Our numerical results demonstrate that the proposed method can correctly determine the number of sources and provide accurate location estimates. The stochastic flow demonstrates greater accuracy compared to the deterministic flow when using the same number of particles.

eess.SP↗

arXiv2024

ISR: Invertible Symbolic Regression

We introduce an Invertible Symbolic Regression (ISR) method. It is a machine learning technique that generates analytical relationships between inputs and outputs of a given dataset via invertible maps (or architectures). The proposed ISR method naturally combines the principles of Invertible Neural Networks (INNs) and Equation Learner (EQL), a neural network-based symbolic architecture for function learning. In particular, we transform the affine coupling blocks of INNs into a symbolic framework, resulting in an end-to-end differentiable symbolic invertible architecture that allows for efficient gradient-based learning. The proposed ISR framework also relies on sparsity promoting regularization, allowing the discovery of concise and interpretable invertible expressions. We show that ISR can serve as a (symbolic) normalizing flow for density estimation tasks. Furthermore, we highlight its practical applicability in solving inverse problems, including a benchmark inverse kinematics problem, and notably, a geoacoustic inversion problem in oceanography aimed at inferring posterior distributions of underlying seabed parameters from acoustic signals.

cs.LG↗