Florian Cheyssial | arXiv Science

arXiv2026

Optimal exposure time for satellite imaging? A trade-off between residual tip-tilt and registration accuracy

Adaptive-Optics assisted astronomical imaging and satellite imaging from the ground share many commonalities but have also specificities. In particular satellites are non-stationary objects in terms of both shape and flux, encouraging relatively short exposure times. Besides, very short exposures freeze the turbulence and preserve high spatial frequency information in speckles, but at the cost of a low image SNR, which complicates the post-processing. Conversely, long exposures lead to speckle-less images where some high frequency information is lost. In this communication, we propose a method for determining the exposure time that optimizes the image quality after post-processing. In particular, we focus on the reduction of the jitter effects -- induced by atmospheric tip-tilt residues, vibrations and object non stationarity -- which may dramatically reduce the image quality when imaging satellites. Our model takes into account the object type and flux, the residual aberrations power spectral density and the noise level.

astro-ph.IM↗

arXiv2026

Joint optical-digital design strategy for adaptive optics systems: application to wavelength selection for satellite imaging

Adaptive optics can be used to mitigate the effects of atmospheric turbulence on imaging systems, but the correction is only partial, and deconvolution is often required to improve the resolution. This results in entire optical/digital systems, which are traditionally designed sequentially, i.e. , the adaptive optics system is optimised first, and the restoration algorithms are designed a second time. Studies on optical/digital systems have shown that jointly optimizing the whole system is a better alternative. We propose to extend these co-design strategies to the design of an adaptive optics-assisted imaging system. We derive a simple criterion that takes into account the source properties and the entire optical/ digital system performance. To illustrate its interest, we use it to optimize the wavelength distribution between the wavefront sensor and the imaging camera. In addition, we explore the potential of using multiple imaging channels operating at different wavelengths as a means of making an imaging system robust to turbulence strength and source magnitude variations. Later, any parameter of the optical/digital system, if not the entire system itself, could be optimized this way.

astro-ph.IM↗