arXiv subjects

Filip Lemic

Publications and source records attributed to Filip Lemic.

At least 19 recordsLinked to original sources

arXiv2026

Unified Evaluation Methodology for AI-Native Integrated Sensing and Communication

Integrated Sensing and Communication (ISAC) couples radio sensing, data transmission, and control actions within a single closed-loop system. When Artificial Intelligence (AI)-driven policies adapt sensing and communication online across a variety of sensing tasks and objectives, end-to-end performance is shaped not only by waveform and channel conditions but also by inference latency, uncertainty, environmental dynamics, and hardware non-idealities, leading to fundamental trade-offs between sensing accuracy, communication reliability, and resource overhead. This manuscript presents a unified system architecture and evaluation methodology for AI-native ISAC, defined as ISAC in which learning-based agents adapt sensing, communication, and actuation policies online under uncertainty. We formalize the design space of closed-loop ISAC, propose a three-stage validation pipeline from bounds and feasibility analysis, through high-fidelity digital-twin simulation, to preliminary over-the-air validation, and provide a minimal reporting checklist that links technical Key Performance Indicators (KPIs) (e.g., data rate, SINR, target detection, parameter estimation, track quality, localization error, outage, latency, overhead, and energy per decision) to application-level Key Value Indicators (KVIs) (e.g., availability and mission effectiveness). Two representative instantiations, specifically Unmanned Aerial Vehicle (UAV)-based outdoor and Reconfigurable Intelligent Surface (RIS)-enabled indoor coverage extensions, are used to illustrate how to structure reproducible baselines and comparable evidence across heterogeneous deployments, helping bridge the gap between theoretical ISAC gains and deployment-ready performance claims.

cs.NI↗

arXiv2026

Whole-Blood Boundary Analysis of BioFET-Based ctDNA Detection for Intravascular Sensing in Intrabody Nanonetworks

Liquid biopsy can detect tumor-derived biomarkers such as circulating tumor DNA (ctDNA), but ultra-low-fraction assays remain costly, slow, and difficult to scale. This motivates interest in intravascular in vivo sensing in the context of intrabody nanonetworks, where nanosensors could support local biomarker monitoring. BioFET-based nanosensors are relevant here because they are label-free, highly miniaturizable, and have shown strong ctDNA sensitivity in controlled media. We examine whether this sensitivity still yields reliable ctDNA detection in whole blood using a reduced-order stochastic simulation model that links operating-point selection, Debye-screened charge transduction, stochastic finite-capacity binding, nonspecific adsorption, background fluctuations, and intrinsic electronic noise to blank-threshold detection. Monte Carlo evaluation with physiologically grounded parameters shows that short Debye length and several-nanometer charge-to-channel separation attenuate the current shift, while low-frequency noise and background fluctuations reduce the margin between target-present and blank responses. Under the tested quasi-static charge-gating regime, the simulated current shifts do not reliably exceed the blank-derived threshold at low ctDNA concentrations. The model therefore provides a whole-blood boundary analysis that identifies which interface configurations and operating conditions most strongly limit reliable BioFET-based intravascular ctDNA detection.

cs.ET↗

arXiv2026

Towards Emotion Recognition with 3D Pointclouds Obtained from Facial Expression Images

Facial Emotion Recognition is a critical research area within Affective Computing due to its wide-ranging applications in Human Computer Interaction, mental health assessment and fatigue monitoring. Current FER methods predominantly rely on Deep Learning techniques trained on 2D image data, which pose significant privacy concerns and are unsuitable for continuous, real-time monitoring. As an alternative, we propose High-Frequency Wireless Sensing (HFWS) as an enabler of continuous, privacy-aware FER, through the generation of detailed 3D facial pointclouds via on-person sensors embedded in wearables. We present arguments supporting the privacy advantages of HFWS over traditional 2D imaging, particularly under increasingly stringent data protection regulations. A major barrier to adopting HFWS for FER is the scarcity of labeled 3D FER datasets. Towards addressing this issue, we introduce a FLAME-based method to generate 3D facial pointclouds from existing public 2D datasets. Using this approach, we create AffectNet3D, a 3D version of the AffectNet database. To evaluate the quality and usability of the generated data, we design a pointcloud refinement pipeline focused on isolating the facial region, and train the popular PointNet++ model on the refined pointclouds. Fine-tuning the model on a small subset of the unseen 3D FER dataset BU-3DFE yields a classification accuracy exceeding 70%, comparable to oracle-level performance. To further investigate the potential of HFWS-based FER for continuous monitoring, we simulate wearable sensing conditions by masking portions of the generated pointclouds. Experimental results show that models trained on AffectNet3D and fine-tuned with just 25% of BU-3DFE outperform those trained solely on BU-3DFE. These findings highlight the viability of our pipeline and support the feasibility of continuous, privacy-aware FER via wearable HFWS systems.

cs.CV↗

arXiv2026

Early-Stage Cancer Biomarker Detection via Intravascular Nanomachines: Modeling and Analysis

Early detection of cancer is essential for timely diagnosis and improved patient outcomes. Among emerging technologies, intra-body nanoscale communication offers an innovative solution to identify molecular cues within the human bloodstream. This study investigates a minimally invasive approach for early-stage cancer biomarker detection using nanomachines introduced into the bloodstream. To assess the feasibility of this approach, computational simulations are used to emulate the vascular environment and evaluate biomarker detection performance under different physiological conditions. Current modeling approaches often fail to capture essential vascular characteristics, including non-uniform flow structures, size-dependent particle mobility, and particle margination driven by red blood cell interactions. To address these limitations, our study incorporates these factors into the simulation framework and quantifies their individual and combined effects on biomarker detection efficiency. Baseline detection performance is first obtained under uniform flow assumptions, after which introducing realistic vascular transport mechanisms progressively reduces detection probability for all vessel types and nanomachine sizes. Among the considered vessels, capillary consistently achieves the highest detection probability across all nanomachine sizes.

cs.ET↗

arXiv2025

Neural 3D Object Reconstruction with Small-Scale Unmanned Aerial Vehicles

Miniaturized Uncrewed Aerial Vehicles (UAVs) can access indoor and hard-to-reach spaces, but severe constraints on payload and autonomy have limited their use in demanding tasks such as high-quality 3D reconstruction. We introduce a novel system architecture that enables autonomous, high-fidelity 3D scanning of static objects with sub-100 gram UAVs. Our core innovation lies in a closed-loop active viewpoint selection framework specifically tailored for ultra-constrained micro-platforms, advancing beyond standard static or offline active reconstruction methods. The framework establishes a dual-reconstruction pipeline that creates a real-time (RT) feedback loop between data capture and flight control. A near-RT process uses Structure-from-Motion (SfM) to generate an instantaneous point-cloud of the object. A systematic trajectory adaptation algorithm analyzes the model quality on the fly and dynamically adapts the UAV's trajectory based on parameterized spatial partitioning to intelligently capture new images of poorly covered areas, ensuring comprehensive acquisition. For the final, high-fidelity output, a non-RT pipeline employs a Neural Radiance Fields (NeRF)-based Neural 3D Reconstruction (N3DR) approach, fusing SfM-derived camera poses with precise external location data, evaluated across both radio-based Ultra Wideband (UWB) and visual motion-capture setups, to correct sensor noise and achieve superior accuracy. We implemented and validated this architecture using Crazyflie 2.1 UAVs. Our experiments, conducted in both single- and multi-UAV configurations show that algorithmic dynamic trajectory adaptation consistently improves reconstruction quality over static flight paths. This work demonstrates a scalable and autonomous solution that unlocks the potential of miniaturized UAVs for fine-grained 3D reconstruction, a capability previously reserved for much larger platforms.

cs.RO↗

arXiv2025

Set Transformer Architectures and Synthetic Data Generation for Flow-Guided Nanoscale Localization

Flow-guided Localization (FGL) enables the identification of spatial regions within the human body that contain an event of diagnostic interest. FGL does that by leveraging the passive movement of energy-constrained nanodevices circulating through the bloodstream. Existing FGL solutions rely on graph models with fixed topologies or handcrafted features, which limit their adaptability to anatomical variability and hinder scalability. In this work, we explore the use of Set Transformer architectures to address these limitations. Our formulation treats nanodevices' circulation time reports as unordered sets, enabling permutation-invariant, variable-length input processing without relying on spatial priors. To improve robustness under data scarcity and class imbalance, we integrate synthetic data generation via deep generative models, including CGAN, WGAN, WGAN-GP, and CVAE. These models are trained to replicate realistic circulation time distributions conditioned on vascular region labels, and are used to augment the training data. Our results show that the Set Transformer achieves comparable classification accuracy compared to Graph Neural Networks (GNN) baselines, while simultaneously providing by-design improved generalization to anatomical variability. The findings highlight the potential of permutation-invariant models and synthetic augmentation for robust and scalable nanoscale localization.

cs.ET↗

arXiv2025

Experimental Assessment of Neural 3D Reconstruction for Small UAV-based Applications

The increasing miniaturization of Unmanned Aerial Vehicles (UAVs) has expanded their deployment potential to indoor and hard-to-reach areas. However, this trend introduces distinct challenges, particularly in terms of flight dynamics and power consumption, which limit the UAVs' autonomy and mission capabilities. This paper presents a novel approach to overcoming these limitations by integrating Neural 3D Reconstruction (N3DR) with small UAV systems for fine-grained 3-Dimensional (3D) digital reconstruction of small static objects. Specifically, we design, implement, and evaluate an N3DR-based pipeline that leverages advanced models, i.e., Instant-ngp, Nerfacto, and Splatfacto, to improve the quality of 3D reconstructions using images of the object captured by a fleet of small UAVs. We assess the performance of the considered models using various imagery and pointcloud metrics, comparing them against the baseline Structure from Motion (SfM) algorithm. The experimental results demonstrate that the N3DR-enhanced pipeline significantly improves reconstruction quality, making it feasible for small UAVs to support high-precision 3D mapping and anomaly detection in constrained environments. In more general terms, our results highlight the potential of N3DR in advancing the capabilities of miniaturized UAV systems.

cs.ET↗

arXiv2025

Experimental Assessment of A Framework for In-body RF-backscattering Localization

Localization of in-body devices is beneficial for Gastrointestinal (GI) diagnosis and targeted treatment. Traditional methods such as imaging and endoscopy are invasive and limited in resolution, highlighting the need for innovative alternatives. This study presents an experimental framework for Radio Frequency (RF)-backscatter-based in-body localization, inspired by the ReMix approach, and evaluates its performance in real-world conditions. The experimental setup includes an in-body backscatter device and various off-body antenna configurations to investigate harmonic generation and reception in air, chicken and pork tissues. The results indicate that optimal backscatter device positioning, antenna selection, and gain settings significantly impact performance, with denser biological tissues leading to greater attenuation. The study also highlights challenges such as external interference and plastic enclosures affecting propagation. The findings emphasize the importance of interference mitigation and refined propagation models to enhance performance.

eess.SP↗

arXiv2025

Opportunities and Challenges for Virtual Reality Streaming over Millimeter-Wave: An Experimental Analysis

Achieving extremely high-quality and truly immersive interactive Virtual Reality (VR) is expected to require a wireless link to the cloud, providing multi-gigabit throughput and extremely low latency. A prime candidate for fulfilling these requirements is millimeter-wave (mmWave) communications, operating in the 30 to 300 GHz bands, rather than the traditional sub-6 GHz. Evaluations with first-generation mmWave Wi-Fi hardware, based on the IEEE 802.11ad standard, have so far largely remained limited to lower-layer metrics. In this work, we present the first experimental analysis of the capabilities of mmWave for streaming VR content, using a novel testbed capable of repeatably creating blockage through mobility. Using this testbed, we show that (a) motion may briefly interrupt transmission, (b) a broken line of sight may degrade throughput unpredictably, and (c) TCP-based streaming frameworks need careful tuning to behave well over mmWave.

cs.NI↗

arXiv2025

Generating Realistic Synthetic Head Rotation Data for Extended Reality using Deep Learning

Extended Reality is a revolutionary method of delivering multimedia content to users. A large contributor to its popularity is the sense of immersion and interactivity enabled by having real-world motion reflected in the virtual experience accurately and immediately. This user motion, mainly caused by head rotations, induces several technical challenges. For instance, which content is generated and transmitted depends heavily on where the user is looking. Seamless systems, taking user motion into account proactively, will therefore require accurate predictions of upcoming rotations. Training and evaluating such predictors requires vast amounts of orientational input data, which is expensive to gather, as it requires human test subjects. A more feasible approach is to gather a modest dataset through test subjects, and then extend it to a more sizeable set using synthetic data generation methods. In this work, we present a head rotation time series generator based on TimeGAN, an extension of the well-known Generative Adversarial Network, designed specifically for generating time series. This approach is able to extend a dataset of head rotations with new samples closely matching the distribution of the measured time series.

cs.CV↗

arXiv2025

Toward Interactive Multi-User Extended Reality Using Millimeter-Wave Networking

Extended Reality (XR) enables a plethora of novel interactive shared experiences. Ideally, users are allowed to roam around freely, while audiovisual content is delivered wirelessly to their Head-Mounted Displays (HMDs). Therefore, truly immersive experiences will require massive amounts of data, in the range of tens of gigabits per second, to be delivered reliably at extremely low latencies. We identify Millimeter-Wave (mmWave) communications, at frequencies between 24 and 300 GHz, as a key enabler for such experiences. In this article, we show how the mmWave state of the art does not yet achieve sufficient performance, and identify several key active research directions expected to eventually pave the way for extremely-high-quality mmWave-enabled interactive multi-user XR.

cs.NI↗

arXiv2024

Miniature UAV-Aided Cooperative THz Networks with Reconfigurable Energy Harvesting Holographic Surfaces

This paper focuses on enhancing the energy efficiency (EE) of a cooperative network that features a miniature unmanned aerial vehicle (UAV) operating at terahertz (THz) frequencies and equipped with holographic surfaces to improve network performance. Unlike traditional reconfigurable intelligent surfaces (RIS), which serve as passive relays for signal reflection, this work introduces a novel concept: energy harvesting (EH) using reconfigurable holographic surfaces (RHS). These surfaces provide more powerful and focused energy delivery during wireless power transfer than RIS and are mounted on the miniature UAV. In this system, a source node enables the UAV to simultaneously receive both information and energy signals, with the harvested energy powering data transmission to a specific destination. The EE optimization problem involves adjusting non-orthogonal multiple access (NOMA) power coefficients and the UAV's flight path while accounting for the unique characteristics of the THz channel. The problem is solved in two stages to maximize EE and meet a target transmission rate. The UAV trajectory is optimized using a successive convex approximation (SCA) method, followed by the adjustment of NOMA power coefficients through a quadratic transform technique. Simulation results demonstrate the effectiveness of the proposed algorithm, showing significant improvements over baseline methods.

eess.SP↗

arXiv2024

Tailoring Graph Neural Network-based Flow-guided Localization to Individual Bloodstreams and Activities

Flow-guided localization using in-body nanodevices in the bloodstream is expected to be beneficial for early disease detection, continuous monitoring of biological conditions, and targeted treatment. The nanodevices face size and power constraints that produce erroneous raw data for localization purposes. On-body anchors receive this data, and use it to derive the locations of diagnostic events of interest. Different Machine Learning (ML) approaches have been recently proposed for this task, yet they are currently restricted to a reference bloodstream of a resting patient. As such, they are unable to deal with the physical diversity of patients' bloodstreams and cannot provide continuous monitoring due to changes in individual patient's activities. Toward addressing these issues for the current State-of-the-Art (SotA) flow-guided localization approach based on Graph Neural Networks (GNNs), we propose a pipeline for GNN adaptation based on individual physiological indicators including height, weight, and heart rate. Our results indicate that the proposed adaptions are beneficial in reconciling the individual differences between bloodstreams and activities.

cs.LG↗

arXiv2024

Multi-Gigabit Interactive Extended Reality over Millimeter-Wave: An End-to-End System Approach

Achieving high-quality wireless interactive Extended Reality (XR) will require multi-gigabit throughput at extremely low latency. The Millimeter-Wave (mmWave) frequency bands, between 24 and 300GHz, can achieve such extreme performance. However, maintaining a consistently high Quality of Experience with highly mobile users is challenging, as mmWave communications are inherently directional. In this work, we present and evaluate an end-to-end approach to such a mmWave-based mobile XR system. We perform a highly realistic simulation of the system, incorporating accurate XR data traffic, detailed mmWave propagation models and actual user motion. We evaluate the impact of the beamforming strategy and frequency on the overall performance. In addition, we provide the first system-level evaluation of the CoVRage algorithm, a proactive and spatially aware user-side beamforming approach designed specifically for highly mobile XR environments.

cs.NI↗

arXiv2023

Analytical Modelling of Raw Data for Flow-Guided In-body Nanoscale Localization

Advancements in nanotechnology and material science are paving the way toward nanoscale devices that combine sensing, computing, data and energy storage, and wireless communication. In precision medicine, these nanodevices show promise for disease diagnostics, treatment, and monitoring from within the patients' bloodstreams. Assigning the location of a sensed biological event with the event itself, which is the main proposition of flow-guided in-body nanoscale localization, would be immensely beneficial from the perspective of precision medicine. The nanoscale nature of the nanodevices and the challenging environment that the bloodstream represents, result in current flow-guided localization approaches being constrained in their communication and energy-related capabilities. The communication and energy constraints of the nanodevices result in different features of raw data for flow-guided localization, in turn affecting its performance. An analytical modeling of the effects of imperfect communication and constrained energy causing intermittent operation of the nanodevices on the raw data produced by the nanodevices would be beneficial. Hence, we propose an analytical model of raw data for flow-guided localization, where the raw data is modeled as a function of communication and energy-related capabilities of the nanodevice. We evaluate the model by comparing its output with the one obtained through the utilization of a simulator for objective evaluation of flow-guided localization, featuring comparably higher level of realism. Our results across a number of scenarios and heterogeneous performance metrics indicate high similarity between the model and simulator-generated raw datasets.

cs.ET↗

arXiv2023

Toward Energy Efficient Multiuser IRS-Assisted URLLC Systems: A Novel Rank Relaxation Method

This paper proposes an energy efficient resource allocation design algorithm for an intelligent reflecting surface (IRS)-assisted downlink ultra-reliable low-latency communication (URLLC) network. This setup features a multi-antenna base station (BS) transmitting data traffic to a group of URLLC users with short packet lengths. We maximize the total network's energy efficiency (EE) through the optimization of active beamformers at the BS and passive beamformers (a.k.a. phase shifts) at the IRS. The main non-convex problem is divided into two sub-problems. An alternating optimization (AO) approach is then used to solve the problem. Through the use of the successive convex approximation (SCA) with a novel iterative rank relaxation method, we construct a concave-convex objective function for each sub-problem. The first sub-problem is a fractional program that is solved using the Dinkelbach method and a penalty-based approach. The second sub-problem is then solved based on semi-definite programming (SDP) and the penalty-based approach. The iterative solution gradually approaches the rank-one for both the active beamforming and unit modulus IRS phase-shift sub-problems. Our results demonstrate the efficacy of the proposed solution compared to existing benchmarks.

eess.SP↗

arXiv2023

Graph Neural Networks as an Enabler of Terahertz-based Flow-guided Nanoscale Localization over Highly Erroneous Raw Data

Contemporary research advances in nanotechnology and material science are rooted in the emergence of nanodevices as a versatile tool that harmonizes sensing, computing, wireless communication, data storage, and energy harvesting. These devices offer novel pathways for disease diagnostics, treatment, and monitoring within the bloodstreams. Ensuring precise localization of events of diagnostic interest, which underpins the concept of flow-guided in-body nanoscale localization, would provide an added diagnostic value to the detected events. Raw data generated by the nanodevices is pivotal for this localization and consist of an event detection indicator and the time elapsed since the last passage of a nanodevice through the heart. The energy constraints of the nanodevices lead to intermittent operation and unreliable communication, intrinsically affecting this data. This posits a need for comprehensively modelling the features of this data. These imperfections also have profound implications for the viability of existing flow-guided localization approaches, which are ill-prepared to address the intricacies of the environment. Our first contribution lies in an analytical model of raw data for flow-guided localization, dissecting how communication and energy capabilities influence the nanodevices' data output. This model acts as a vital bridge, reconciling idealized assumptions with practical challenges of flow-guided localization. Toward addressing these practical challenges, we also present an integration of Graph Neural Networks (GNNs) into the flow-guided localization paradigm. GNNs excel in capturing complex dynamic interactions inherent to the localization of events sensed by the nanodevices. Our results highlight the potential of GNNs not only to enhance localization accuracy but also extend coverage to encompass the entire bloodstream.

cs.LG↗

arXiv2023

Insights from the Design Space Exploration of Flow-Guided Nanoscale Localization

Nanodevices with Terahertz (THz)-based wireless communication capabilities are providing a primer for flow-guided localization within the human bloodstreams. Such localization is allowing for assigning the locations of sensed events with the events themselves, providing benefits along the lines of early and precise diagnostics, and reduced costs and invasiveness. Flow-guided localization is still in a rudimentary phase, with only a handful of works targeting the problem. Nonetheless, the performance assessments of the proposed solutions are already carried out in a non-standardized way, usually along a single performance metric, and ignoring various aspects that are relevant at such a scale (e.g., nanodevices' limited energy) and for such a challenging environment (e.g., extreme attenuation of in-body THz propagation). As such, these assessments feature low levels of realism and cannot be compared in an objective way. Toward addressing this issue, we account for the environmental and scale-related peculiarities of the scenario and assess the performance of two state-of-the-art flow-guided localization approaches along a set of heterogeneous performance metrics such as the accuracy and reliability of localization.

cs.NI↗