arXiv subjects

Feng Wang

Publications and source records attributed to Feng Wang.

At least 343 records · Page 19Linked to original sources

arXiv2020

Study of Thermal Expansion Coefficients of 2D Materials via Raman Micro-spectroscopy: Revisited

We report a joint study, using Raman micro-spectroscopy and molecular dynamics simulations, on the substrate effect on thermal properties of 2D materials and revisit measurement of thermal expansion coefficient (TEC) of supported 2D film. Graphene is employed as a representative. We find that the out-of-plane coupling between graphene and substrate strongly affects the temperature-dependent vibrational modes and TEC of graphene. Density of states for long-wavelength out-of-plane oscillations is significantly reduced when graphene is supported on an alkane substrate. To account for the contribution of the out-of-plane coupling to TEC, a Raman micro-spectroscopic scheme is developed. The TEC of graphene on octadecyltrichlorosilane substrate is found to be (-0.6+-0.5)*10-6/K at room temperature, which is fundamentally smaller than that of free-standing graphene. Our results shed light on the understanding of the interaction between 2D material and substrate, and offer a general recipe for optical measurement of TEC of a supported 2D film.

cond-mat.mtrl-sci↗

arXiv2020

Imaging spinon density modulations in a 2D quantum spin liquid

Two-dimensional triangular-lattice antiferromagnets are predicted under some conditions to exhibit a quantum spin liquid ground state whose low-energy behavior is described by a spinon Fermi surface. Directly imaging the resulting spinons, however, is difficult due to their fractional, chargeless nature. Here we use scanning tunneling spectroscopy to image spinon density modulations arising from a spinon Fermi surface instability in single-layer 1T-TaSe$_2$, a two-dimensional Mott insulator. We first demonstrate the existence of localized spins arranged on a triangular lattice in single-layer 1T-TaSe$_2$ by contacting it to a metallic 1H-TaSe$_2$ layer and measuring the Kondo effect. Subsequent spectroscopic imaging of isolated, single-layer 1T-TaSe$_2$ reveals long-wavelength modulations at Hubbard band energies that reflect spinon density modulations. This allows direct experimental measurement of the spinon Fermi wavevector, in good agreement with theoretical predictions for a 2D quantum spin liquid. These results establish single-layer 1T-TaSe$_2$ as a new platform for studying novel two-dimensional quantum-spin-liquid phenomena.

cond-mat.str-el↗

arXiv2020

An Augmented Regression Model for Tensors with Missing Values

Heterogeneous but complementary sources of data provide an unprecedented opportunity for developing accurate statistical models of systems. Although the existing methods have shown promising results, they are mostly applicable to situations where the system output is measured in its complete form. In reality, however, it may not be feasible to obtain the complete output measurement of a system, which results in observations that contain missing values. This paper introduces a general framework that integrates tensor regression with tensor completion and proposes an efficient optimization framework that alternates between two steps for parameter estimation. Through multiple simulations and a case study, we evaluate the performance of the proposed method. The results indicate the superiority of the proposed method in comparison to a benchmark.

stat.AP↗

arXiv2020

Convolutional neural network based deep-learning architecture for intraprostatic tumour contouring on PSMA PET images in patients with primary prostate cancer

Accurate delineation of the intraprostatic gross tumour volume (GTV) is a prerequisite for treatment approaches in patients with primary prostate cancer (PCa). Prostate-specific membrane antigen positron emission tomography (PSMA-PET) may outperform MRI in GTV detection. However, visual GTV delineation underlies interobserver heterogeneity and is time consuming. The aim of this study was to develop a convolutional neural network (CNN) for automated segmentation of intraprostatic tumour (GTV-CNN) in PSMA-PET. Methods: The CNN (3D U-Net) was trained on [68Ga]PSMA-PET images of 152 patients from two different institutions and the training labels were generated manually using a validated technique. The CNN was tested on two independent internal (cohort 1: [68Ga]PSMA-PET, n=18 and cohort 2: [18F]PSMA-PET, n=19) and one external (cohort 3: [68Ga]PSMA-PET, n=20) test-datasets. Accordance between manual contours and GTV-CNN was assessed with Dice-Sørensen coefficient (DSC). Sensitivity and specificity were calculated for the two internal test-datasets by using whole-mount histology. Results: Median DSCs for cohorts 1-3 were 0.84 (range: 0.32-0.95), 0.81 (range: 0.28-0.93) and 0.83 (range: 0.32-0.93), respectively. Sensitivities and specificities for GTV-CNN were comparable with manual expert contours: 0.98 and 0.76 (cohort 1) and 1 and 0.57 (cohort 2), respectively. Computation time was around 6 seconds for a standard dataset. Conclusion: The application of a CNN for automated contouring of intraprostatic GTV in [68Ga]PSMA- and [18F]PSMA-PET images resulted in a high concordance with expert contours and in high sensitivities and specificities in comparison with histology reference. This robust, accurate and fast technique may be implemented for treatment concepts in primary PCa. The trained model and the study's source code are available in an open source repository.

cs.CV↗

arXiv2020

COVID-19 Docking Server: A meta server for docking small molecules, peptides and antibodies against potential targets of COVID-19

Motivation: The coronavirus disease 2019 (COVID-19) caused by a new type of coronavirus has been emerging from China and led to thousands of death globally since December 2019. Despite many groups have engaged in studying the newly emerged virus and searching for the treatment of COVID-19, the understanding of the COVID-19 target-ligand interactions represents a key chal-lenge. Herein, we introduce COVID-19 Docking Server, a web server that predicts the binding modes between COVID-19 targets and the ligands including small molecules, peptides and anti-bodies. Results: Structures of proteins involved in the virus life cycle were collected or constructed based on the homologs of coronavirus, and prepared ready for docking. The meta platform provides a free and interactive tool for the prediction of COVID-19 target-ligand interactions and following drug discovery for COVID-19.

q-bio.BM↗

arXiv2020

Real-Time Resource Allocation for Wireless Powered Multiuser Mobile Edge Computing With Energy and Task Causality

This paper considers a wireless powered multiuser mobile edge computing (MEC) system, in which a multi-antenna hybrid access point (AP) wirelessly charges multiple users, and each user relies on the harvested energy to execute computation tasks. We jointly optimize the energy beamforming and remote task execution at the AP, as well as the local computing and task offloading, aiming to minimize the total system energy consumption over a finite time horizon, subject to causality constraints for both energy harvesting and task arrival at the users. In particular, we consider a practical scenario with casual task state information (TSI) and channel state information (CSI), i.e., only the current and previous TSI and CSI are available, but the future TSI and CSI can only be predicted subject to certain errors. To solve this real-time resource allocation problem, we propose an offline-optimization inspired online design approach. First, we consider the offline optimization case by assuming that the TSI and CSI are perfectly known a-priori. In this case, the energy minimization problem corresponds to a convex problem, for which the semi-closed-form optimal solution is obtained via the Lagrange duality method. Next, inspired by the optimal offline solution, we propose a sliding-window based online resource allocation design in practical cases by integrating with the sequential optimization. Finally, numerical results show that the proposed joint wireless powered MEC designs significantly improve the system's energy efficiency, as compared with the benchmark schemes that consider a sliding window of size one or without such joint optimization.

cs.IT↗

arXiv2020

High Yield Growth and Doping of Black Phosphorus with Tunable Electronic Properties

Black phosphorus (BP) has recently attracted significant interest due to its unique electronic and optical properties. Doping is an effective strategy to tune a material's electronic structures, however, the direct and controllable growth of BP with a high yield and its doping remain a great challenge. Here we report an efficient short-distance transport (SDT) growth approach and achieve the controlled growth of high quality BP with the highest yield so far, where 98% of the red phosphorus is converted to BP. The doping of BP by As, Sb, Bi, Se and Te are also achieved by this SDT growth approach. Spectroscopic results show that doping systematically changes its electronic structures including band gap, work function, and energy band position. As a result, we have found that the air-stability of doped BP samples (Sb and Te-doped BP) improves compared with pristine BP, due to the downshift of the conduction band minimum with doping. This work develops a new method to grow BP and doped BP with tunable electronic structures and improved stability, and should extend the uses of these class of materials in various areas.

cond-mat.mtrl-sci↗

arXiv2020

Nanoscale Conductivity Imaging of Correlated Electronic States in WSe2/WS2 Moiré Superlattices

We report the nanoscale conductivity imaging of correlated electronic states in angle-aligned WSe2/WS2 heterostructures using microwave impedance microscopy. The noncontact microwave probe allows us to observe the Mott insulating state with one hole per moiré unit cell that persists for temperatures up to 150 K, consistent with other characterization techniques. In addition, we identify for the first time a Mott insulating state at one electron per moiré unit cell. Appreciable inhomogeneity of the correlated states is directly visualized in the hetero-bilayer region, indicative of local disorders in the moiré superlattice potential or electrostatic doping. Our work provides important insights on 2D moiré systems down to the microscopic level.

cond-mat.mes-hall↗

arXiv2020

Imaging moiré flat bands in 3D reconstructed WSe2/WS2 superlattices

Moiré superlattices in transition metal dichalcogenide (TMD) heterostructures can host novel correlated quantum phenomena due to the interplay of narrow moiré flat bands and strong, long-range Coulomb interactions1-5. However, microscopic knowledge of the atomically-reconstructed moiré superlattice and resulting flat bands is still lacking, which is critical for fundamental understanding and control of the correlated moiré phenomena. Here we quantitatively study the moiré flat bands in three-dimensional (3D) reconstructed WSe2/WS2 moiré superlattices by comparing scanning tunneling spectroscopy (STS) of high quality exfoliated TMD heterostructure devices with ab initio simulations of TMD moiré superlattices. A strong 3D buckling reconstruction accompanied by large in-plane strain redistribution is identified in our WSe2/WS2 moiré heterostructures. STS imaging demonstrates that this results in a remarkably narrow and highly localized K-point moiré flat band at the valence band edge of the heterostructure. A series of moiré flat bands are observed at different energies that exhibit varying degrees of localization. Our observations contradict previous simplified theoretical models but agree quantitatively with ab initio simulations that fully capture the 3D structural reconstruction. Here the strain redistribution and 3D buckling dominate the effective moiré potential and result in moiré flat bands at the Brillouin zone K points.

cond-mat.mes-hall↗

arXiv2020

Adversarial jamming attacks and defense strategies via adaptive deep reinforcement learning

As the applications of deep reinforcement learning (DRL) in wireless communications grow, sensitivity of DRL based wireless communication strategies against adversarial attacks has started to draw increasing attention. In order to address such sensitivity and alleviate the resulting security concerns, we in this paper consider a victim user that performs DRL-based dynamic channel access, and an attacker that executes DRLbased jamming attacks to disrupt the victim. Hence, both the victim and attacker are DRL agents and can interact with each other, retrain their models, and adapt to opponents' policies. In this setting, we initially develop an adversarial jamming attack policy that aims at minimizing the accuracy of victim's decision making on dynamic channel access. Subsequently, we devise defense strategies against such an attacker, and propose three defense strategies, namely diversified defense with proportional-integral-derivative (PID) control, diversified defense with an imitation attacker, and defense via orthogonal policies. We design these strategies to maximize the attacked victim's accuracy and evaluate their performances.

eess.SP↗

arXiv2020

Tian's partial $C^0$-estimate implies Hamilton-Tian's conjecture

In this paper, we prove the Hamilton-Tian conjecture for Kähler-Ricci flow based on a recent work of Liu-Székelyhidi on Tian's partical $C^0$-estimate for poralized Kähler metrics with Ricci bounded below. The Yau-Tian-Donaldson conjecture for the existence of Kähler-Einstein metrics on Fano manifolds will be also discussed.

math.DG↗

arXiv2020

Cooling-Aware Resource Allocation and Load Management for Mobile Edge Computing Systems

Driven by explosive computation demands of Internet of Things (IoT), mobile edge computing (MEC) provides a promising technique to enhance the computation capability for mobile users. In this paper, we propose a joint resource allocation and load management mechanism in an MEC system with wireless power transfer (WPT), by jointly optimizing the transmit power for WPT, the local/edge computing load, the offloading time, and the frequencies of the central processing units (CPUs) at the access point (AP) and the users. To achieve an energy-efficient and sustainable WPT-MEC system, we minimize the total energy consumption of the AP, while meeting computation latency requirements. Cooling energy which is non-negligible, is taken into account in minimizing the energy consumption of the MEC system. By rigorously orchestrating the state-of-the-art optimization techniques, we design an iterative algorithm and obtain the optimal solution in a semi-closed form. Based on the solution, interesting properties and insights are summarized. Extensive numerical tests show that the proposed algorithm can save up to 90.4% the energy of existing benchmarks.

eess.SP↗

arXiv2020

Ultra-high-resolution imaging of moiré lattices and superstructures using scanning microwave impedance microscopy under ambient conditions

Two-dimensional heterostructures with layers of slightly different lattice vectors exhibit a new periodic structure known as moire lattices. Moire lattice formation provides a powerful new way to engineer the electronic structure of two-dimensional materials for realizing novel correlated and topological phenomena. In addition, superstructures of moire lattices can emerge from multiple misaligned lattice vectors or inhomogeneous strain distribution, which offers an extra degree of freedom in the electronic band structure design. High-resolution imaging of the moire lattices and superstructures is critical for quantitative understanding of emerging moire physics. Here we report the nanoscale imaging of moire lattices and superstructures in various graphene-based samples under ambient conditions using an ultra-high-resolution implementation of scanning microwave impedance microscopy. We show that, quite remarkably, although the scanning probe tip has a gross radius of ~100 nm, an ultra-high spatial resolution in local conductivity profiles better than 5 nm can be achieved. This resolution enhancement not only enables to directly visualize the moire lattices in magic-angle twisted double bilayer graphene and composite super-moire lattices, but also allows design path toward artificial synthesis of novel moire superstructures such as the Kagome moire from the interplay and the supermodulation between twisted graphene and hexagonal boron nitride layers.

cond-mat.mes-hall↗

arXiv2020

SpellGCN: Incorporating Phonological and Visual Similarities into Language Models for Chinese Spelling Check

Chinese Spelling Check (CSC) is a task to detect and correct spelling errors in Chinese natural language. Existing methods have made attempts to incorporate the similarity knowledge between Chinese characters. However, they take the similarity knowledge as either an external input resource or just heuristic rules. This paper proposes to incorporate phonological and visual similarity knowledge into language models for CSC via a specialized graph convolutional network (SpellGCN). The model builds a graph over the characters, and SpellGCN is learned to map this graph into a set of inter-dependent character classifiers. These classifiers are applied to the representations extracted by another network, such as BERT, enabling the whole network to be end-to-end trainable. Experiments (The dataset and all code for this paper are available at https://github.com/ACL2020SpellGCN/SpellGCN) are conducted on three human-annotated datasets. Our method achieves superior performance against previous models by a large margin.

cs.CL↗

arXiv2020

Robust Automated Photometry Pipeline for Blurred Images

The primary task of the 1.26-m telescope jointly operated by the National Astronomical Observatory and Guangzhou University is photometric observations of the g, r, and i bands. A data processing pipeline system was set up with mature software packages, such as IRAF, SExtractor, and SCAMP, to process approximately 5 GB of observational data automatically every day. However, the success ratio was significantly reduced when processing blurred images owing to telescope tracking error; this, in turn, significantly constrained the output of the telescope. We propose a robust automated photometric pipeline (RAPP) software that can correctly process blurred images. Two key techniques are presented in detail: blurred star enhancement and robust image matching. A series of tests proved that RAPP not only achieves a photometric success ratio and precision comparable to those of IRAF but also significantly reduces the data processing load and improves the efficiency.

astro-ph.IM↗

arXiv2020

Frozen Patterns of Impacted Droplets: From Conical Tips to Toroidal Shapes

We report frozen patterns for the water droplets impacting on a cold substrate through fast-speed images. These patterns can be manipulated by several physical parameters (the droplet size, falling height, and substrate temperature), and the scaling analysis has a remarkable agreement with the phase diagram. The observed double-concentric toroidal shape is attributed to the correlation between the impacting dynamics and freezing process, as confirmed by the spatiotemporal evolution of the droplet temperature, the identified timescale associated with the morphology and solidification ($t_{inn}\simeq τ_{sol}$), and the ice front-advection model. These results for frozen patterns provide insight into the complex interplay of the rapid impacting hydrodynamics, the transient heat transfer, and the intricate solidification process.

physics.flu-dyn↗

arXiv2020

A Hybrid method of accurate classification for Blazars Of Uncertain Type in Fermi LAT Catalogs

Significant progress in the classification of Fermi unassociated sources , has led to an increasing number of blazars are being found. The optical spectrum is effectively used to classify the blazars into two groups such as BL Lacs and flat spectrum radio quasars (FSRQs). However, the accurate classification of the blazars without optical spectrum information, i.e., blazars of uncertain type (BCUs), remains a significant challenge. In this paper, we present a principal component analysis (PCA) and machine learning hybrid blazars classification method. The method, based on the data from Fermi LAT 3FGL Catalog, first used the PCA to extract the primary features of the BCUs and then used a machine learning algorithm to further classify the BCUs. Experimental results indicate that the that the use of PCA algorithms significantly improved the classification. More importantly, comparison with the Fermi LAT 4FGL Catalog, which contains the spectral classification of those BCUs in the Fermi-LAT 3FGL Catalog, reveals that the proposed classification method in the study exhibits higher accuracy than currently established methods; specifically, 151 out of 171 BL Lacs and 19 out of 24 FSRQs are correctly classified.

astro-ph.IM↗

arXiv2020

An end-to-end CNN framework for polarimetric vision tasks based on polarization-parameter-constructing network

Pixel-wise operations between polarimetric images are important for processing polarization information. For the lack of such operations, the polarization information cannot be fully utilized in convolutional neural network(CNN). In this paper, a novel end-to-end CNN framework for polarization vision tasks is proposed, which enables the networks to take full advantage of polarimetric images. The framework consists of two sub-networks: a polarization-parameter-constructing network (PPCN) and a task network. PPCN implements pixel-wise operations between images in the CNN form with 1x1 convolution kernels. It takes raw polarimetric images as input, and outputs polarization-parametric images to task network so as to complete a vison task. By training together, the PPCN can learn to provide the most suitable polarization-parametric images for the task network and the dataset. Taking faster R-CNN as task network, the experimental results show that compared with existing methods, the proposed framework achieves much higher mean-average-precision (mAP) in object detection task

cs.CV↗