arXiv Science⌕ Search

arXiv subjects

Feng Wang

Publications and source records attributed to Feng Wang.

At least 307 records · Page 17Linked to original sources

Boost Neural Networks by Checkpoints

Training multiple deep neural networks (DNNs) and averaging their outputs is a simple way to improve the predictive performance. Nevertheless, the multiplied training cost prevents this ensemble method to be practical and efficient. Several recent works attempt to save and ensemble the checkpoints of DNNs, which only requires the same computational cost as training a single network. However, these methods suffer from either marginal accuracy improvements due to the low diversity of checkpoints or high risk of divergence due to the cyclical learning rates they adopted. In this paper, we propose a novel method to ensemble the checkpoints, where a boosting scheme is utilized to accelerate model convergence and maximize the checkpoint diversity. We theoretically prove that it converges by reducing exponential loss. The empirical evaluation also indicates our proposed ensemble outperforms single model and existing ensembles in terms of accuracy and efficiency. With the same training budget, our method achieves 4.16% lower error on Cifar-100 and 6.96% on Tiny-ImageNet with ResNet-110 architecture. Moreover, the adaptive sample weights in our method make it an effective solution to address the imbalanced class distribution. In the experiments, it yields up to 5.02% higher accuracy over single EfficientNet-B0 on the imbalanced datasets.

cs.LG↗

Self-supervised denoising for massive noisy images

We propose an effective deep learning model for signal reconstruction, which requires no signal prior, no noise model calibration, and no clean samples. This model only assumes that the noise is independent of the measurement and that the true signals share the same structured information. We demonstrate its performance on a variety of real-world applications, from sub-Ångström resolution atomic images to sub-arcsecond resolution astronomy images.

cs.CV↗

Fine-grained Solar Flare Forecasting Based on the Hybrid Convolutional Neural Networks

Improving the performance of solar flare forecasting is a hot topic in solar physics research field. Deep learning has been considered a promising approach to perform solar flare forecasting in recent years. We first used the Generative Adversarial Networks (GAN) technique augmenting sample data to balance samples with different flare classes. We then proposed a hybrid convolutional neural network (CNN) model M for forecasting flare eruption in a solar cycle. Based on this model, we further investigated the effects of the rising and declining phases for flare forecasting. Two CNN models, i.e., Mrp and Mdp, were presented to forecast solar flare eruptions in the rising phase and declining phase of solar cycle 24, respectively. A series of testing results proved: 1) Sample balance is critical for the stability of the CNN model. The augmented data generated by GAN effectively improved the stability of the forecast model. 2) For C-class, M-class, and X-class flare forecasting using Solar Dynamics Observatory (SDO) line-of-sight (LOS) magnetograms, the means of true skill statistics (TSS) score of M are 0.646, 0.653 and 0.762, which improved by 20.1%, 22.3%, 38.0% compared with previous studies. 3) It is valuable to separately model the flare forecasts in the rising and declining phases of a solar cycle. Compared with model M, the means of TSS score for No-flare, C-class, M-class, X-class flare forecasting of the Mrp improved by 5.9%, 9.4%, 17.9% and 13.1%, and the Mdp improved by 1.5%, 2.6%, 11.5% and 12.2%.

astro-ph.SR↗

MC$^2$-SF: Slow-Fast Learning for Mobile-Cloud Collaborative Recommendation

With the hardware development of mobile devices, it is possible to build the recommendation models on the mobile side to utilize the fine-grained features and the real-time feedbacks. Compared to the straightforward mobile-based modeling appended to the cloud-based modeling, we propose a Slow-Fast learning mechanism to make the Mobile-Cloud Collaborative recommendation (MC$^2$-SF) mutual benefit. Specially, in our MC$^2$-SF, the cloud-based model and the mobile-based model are respectively treated as the slow component and the fast component, according to their interaction frequency in real-world scenarios. During training and serving, they will communicate the prior/privileged knowledge to each other to help better capture the user interests about the candidates, resembling the role of System I and System II in the human cognition. We conduct the extensive experiments on three benchmark datasets and demonstrate the proposed MC$^2$-SF outperforms several state-of-the-art methods.

cs.IR↗

Deep 3D Mesh Watermarking with Self-Adaptive Robustness

Robust 3D mesh watermarking is a traditional research topic in computer graphics, which provides an efficient solution to the copyright protection for 3D meshes. Traditionally, researchers need manually design watermarking algorithms to achieve sufficient robustness for the actual application scenarios. In this paper, we propose the first deep learning-based 3D mesh watermarking framework, which can solve this problem once for all. In detail, we propose an end-to-end network, consisting of a watermark embedding sub-network, a watermark extracting sub-network and attack layers. We adopt the topology-agnostic graph convolutional network (GCN) as the basic convolution operation for 3D meshes, so our network is not limited by registered meshes (which share a fixed topology). For the specific application scenario, we can integrate the corresponding attack layers to guarantee adaptive robustness against possible attacks. To ensure the visual quality of watermarked 3D meshes, we design a curvature-based loss function to constrain the local geometry smoothness of watermarked meshes. Experimental results show that the proposed method can achieve more universal robustness and faster watermark embedding than baseline methods while guaranteeing comparable visual quality.

cs.GR↗

Imaging gate-tunable Tomonaga-Luttinger liquids in 1H-MoSe$_2$ mirror twin boundaries

One-dimensional electron systems (1DESs) exhibit properties that are fundamentally different from higher-dimensional systems. For example, electron-electron interactions in 1DESs have been predicted to induce Tomonaga-Luttinger liquid behavior. Naturally-occurring grain boundaries in single-layer semiconducting transition metal dichalcogenides provide 1D conducting channels that have been proposed to host Tomonaga-Luttinger liquids, but charge density wave physics has also been suggested to explain their behavior. Clear identification of the electronic ground state of this system has been hampered by an inability to electrostatically gate such boundaries and thereby tune their charge carrier concentration. Here we present a scanning tunneling microscopy/spectroscopy study of gate-tunable mirror twin boundaries (MTBs) in single-layer 1H-MoSe$_2$ devices. Gating here enables STM spectroscopy to be performed for different MTB electron densities, thus allowing precise characterization of electron-electron interaction effects. Visualization of MTB electronic structure under these conditions allows unambiguous identification of collective density wave excitations having two distinct velocities, in quantitative agreement with the spin-charge separation predicted by finite-length Tomonaga-Luttinger-liquid theory.

cond-mat.str-el↗

Dynamic RAT Selection and Transceiver Optimization for Mobile Edge Computing Over Multi-RAT Heterogeneous Networks

Mobile edge computing (MEC) integrated with multiple radio access technologies (RATs) is a promising technique for satisfying the growing low-latency computation demand of emerging intelligent internet of things (IoT) applications. Under the distributed MapReduce framework, this paper investigates the joint RAT selection and transceiver design for over-the-air (OTA) aggregation of intermediate values (IVAs) in wireless multiuser MEC systems, while taking into account the energy budget constraint for the local computing and IVA transmission per wireless device (WD). We aim to minimize the weighted sum of the computation mean squared error (MSE) of the aggregated IVA at the RAT receivers, the WDs' IVA transmission cost, and the associated transmission time delay, which is a mixed-integer and non-convex problem. Based on the Lagrange duality method and primal decomposition, we develop a low-complexity algorithm by solving the WDs' RAT selection problem, the WDs' transmit coefficients optimization problem, and the aggregation beamforming problem. Extensive numerical results are provided to demonstrate the effectiveness and merit of our proposed algorithm as compared with other existing schemes.

cs.IT↗

Correlated interlayer exciton insulator in double layers of monolayer WSe2 and moiré WS2/WSe2

Moiré superlattices in van der Waals heterostructures have emerged as a powerful tool for engineering novel quantum phenomena. Here we report the observation of a correlated interlayer exciton insulator in a double-layer heterostructure composed of a WSe2 monolayer and a WS2/WSe2 moiré bilayer that are separated by an ultrathin hexagonal boron nitride (hBN). The moiré WS2/WSe2 bilayer features a Mott insulator state at hole density p/p0 = 1, where p0 corresponds to one hole per moiré lattice site. When electrons are added to the Mott insulator in the WS2/WSe2 moiré bilayer and an equal number of holes are injected into the WSe2 monolayer, a new interlayer exciton insulator emerges with the holes in the WSe2 monolayer and the electrons in the doped Mott insulator bound together through interlayer Coulomb interactions. The excitonic insulator is stable up to a critical hole density of ~ 0.5p0 in the WSe2 monolayer, beyond which the system becomes metallic. Our study highlights the opportunities for realizing novel quantum phases in double-layer moiré systems due to the interplay between the moiré flat band and strong interlayer electron interactions.

cond-mat.mes-hall↗

Tuning color centers at a twisted interface

Color center is a promising platform for quantum technologies, but their application is hindered by the typically random defect distribution and complex mesoscopic environment. Employing cathodoluminescence, we demonstrate that an ultraviolet-emitting single photon emitter can be readily activated and controlled on-demand at the twisted interface of two hexagonal boron nitride flakes. The brightness of the color center can be enhanced by two orders of magnitude by altering the twist angle. Additionally, a brightness modulation of nearly 100% of this color center is achieved by an external voltage. Our ab-initio GW calculations suggest that the emission is correlated to nitrogen vacancies and that a twist-induced moiré potential facilitates electron-hole recombination. This mechanism is further exploited to draw nanoscale color center patterns using electron beams.

cond-mat.mtrl-sci↗

YOLOX: Exceeding YOLO Series in 2021

In this report, we present some experienced improvements to YOLO series, forming a new high-performance detector -- YOLOX. We switch the YOLO detector to an anchor-free manner and conduct other advanced detection techniques, i.e., a decoupled head and the leading label assignment strategy SimOTA to achieve state-of-the-art results across a large scale range of models: For YOLO-Nano with only 0.91M parameters and 1.08G FLOPs, we get 25.3% AP on COCO, surpassing NanoDet by 1.8% AP; for YOLOv3, one of the most widely used detectors in industry, we boost it to 47.3% AP on COCO, outperforming the current best practice by 3.0% AP; for YOLOX-L with roughly the same amount of parameters as YOLOv4-CSP, YOLOv5-L, we achieve 50.0% AP on COCO at a speed of 68.9 FPS on Tesla V100, exceeding YOLOv5-L by 1.8% AP. Further, we won the 1st Place on Streaming Perception Challenge (Workshop on Autonomous Driving at CVPR 2021) using a single YOLOX-L model. We hope this report can provide useful experience for developers and researchers in practical scenes, and we also provide deploy versions with ONNX, TensorRT, NCNN, and Openvino supported. Source code is at https://github.com/Megvii-BaseDetection/YOLOX.

cs.CV↗

Interlayer interactions in one-dimensional van der Waals moiré superlattices

Different atomistic registry between the layers forming the inner and outer nanotubes can form one-dimensional (1D) van der Waals (vdW) moiré superlattices. Unlike the two-dimensional (2D) vdW moiré superlattices, effects of 1D vdW moiré superlattices on electronic and optical properties in 1D moiré superlattices are not well understood, and they are often neglected. In this Perspective, we summarize new experimental observations and theoretical perspectives related to interlayer interactions in double-walled carbon nanotubes (DWNTs), a representative 1D vdW moiré system. Our discussion will focus on new optical features emerging from the interlayer electronic interactions in DWNTs. Exciting correlated physics and exotic phases of matter are anticipated to exist in 1D vdW moiré superlattices, analogous with those discovered in the 2D vdW moiré superlattices. We further discuss the future directions in probing and uncovering interesting physical phenomena in 1D moiré superlattices.

cond-mat.mes-hall↗

Enhanced Remote Astronomical Archive System Based on the File-Level Unlimited Sliding-Window Technique

Data archiving is one of the most critical issues for modern astronomical observations. With the development of a new generation of radio telescopes, the transfer and archiving of massive remote data have become urgent problems to be solved. Herein, we present a practical and robust file-level flow-control approach, called the Unlimited Sliding-Window (USW), by referring to the classic flow-control method in TCP protocol. Basing on the USW and the Next Generation Archive System (NGAS) developed for the Murchison Widefield Array telescope, we further implemented an enhanced archive system (ENGAS) using ZeroMQ middleware. The ENGAS substantially improves the transfer performance and ensures the integrity of transferred files. In the tests, the ENGAS is approximately three to twelve times faster than the NGAS and can fully utilize the bandwidth of network links. Thus, for archiving radio observation data, the ENGAS reduces the communication time, improves the bandwidth utilization, and solves the remote synchronous archiving of data from observatories such as Mingantu spectral radioheliograph. It also provides a better reference for the future construction of the Square Kilometer Array (SKA) Science Regional Center.

astro-ph.IM↗

Computation Rate Maximization for Multiuser Mobile Edge Computing Systems With Dynamic Energy Arrivals

This paper considers an energy harvesting (EH) based multiuser mobile edge computing (MEC) system, where each user utilizes the harvested energy from renewable energy sources to execute its computation tasks via computation offloading and local computing. Towards maximizing the system's weighted computation rate (i.e., the number of weighted users' computing bits within a finite time horizon) subject to the users' energy causality constraints due to dynamic energy arrivals, the decision for joint computation offloading and local computing over time is optimized {\em over time}. Assuming that the profile of channel state information and dynamic task arrivals at the users is known in advance, the weighted computation rate maximization problem becomes a convex optimization problem. Building on the Lagrange duality method, the well-structured optimal solution is analytically obtained. Both the users' local computing and offloading rates are shown to have a monotonically increasing structure. Numerical results show that the proposed design scheme can achieve a significant performance gain over the alternative benchmark schemes.

cs.IT↗

Imaging Generalized Wigner Crystal States in a WSe2/WS2 Moiré Superlattice

The Wigner crystal state, first predicted by Eugene Wigner in 1934, has fascinated condensed matter physicists for nearly 90 years2-14. Studies of two-dimensional (2D) electron gases first revealed signatures of the Wigner crystal in electrical transport measurements at high magnetic fields2-4. More recently optical spectroscopy has provided evidence of generalized Wigner crystal states in transition metal dichalcogenide (TMDC) moiré superlattices. Direct observation of the 2D Wigner crystal lattice in real space, however, has remained an outstanding challenge. Scanning tunneling microscopy (STM) in principle has sufficient spatial resolution to image a Wigner crystal, but conventional STM measurements can potentially alter fragile Wigner crystal states in the process of measurement. Here we demonstrate real-space imaging of 2D Wigner crystals in WSe2/WS2 moiré heterostructures using a novel non-invasive STM spectroscopy technique. We employ a graphene sensing layer in close proximity to the WSe2/WS2 moiré superlattice for Wigner crystal imaging, where local STM tunneling current into the graphene sensing layer is modulated by the underlying electron lattice of the Wigner crystal in the WSe2/WS2 heterostructure. Our measurement directly visualizes different lattice configurations associated with Wigner crystal states at fractional electron fillings of n = 1/3, 1/2, and 2/3, where n is the electron number per site. The n=1/3 and n=2/3 Wigner crystals are observed to exhibit a triangle and a honeycomb lattice, respectively, in order to minimize nearest-neighbor occupations. The n = 1/2 state, on the other hand, spontaneously breaks the original C3 symmetry and forms a stripe structure in real space. Our study lays a solid foundation toward the fundamental understanding of rich Wigner crystal states in WSe2/WS2 moiré heterostructures.

cond-mat.mes-hall↗

Armstrong Liquid Bridge: Formation, Evolution and Breakup

In this paper, we experimentally explore the formation, evolution and breakup of Armstrong liquid bridge. The extremely complicated evolution stage is revealed, which involves many coupled processes including the morphology change, current variation, heat transfer, and water evaporation. By focusing on the final fate of this liquid bridge, we observe that the breakup occurs once an effective length ($\tilde{L}$) is reached. This effective length increases linearly with the applied voltage, implying a threshold electric field to sustain the liquid bridge. Moreover, by an introduced external flow, the lifetime of the liquid bridge can be controlled, while the effective length associated with the breakup is independent on the external flow rate. Hence, these findings remarkably demonstrate that the breakup of liquid bridge is directly correlated with the effective length. In order to understand this correlation, a simplified model of an electrified jet is employed to take the electric field into account. By the linear stability analysis, the attained phase diagram agrees with the experiments well. Although a more comprehensive theory is required to consider other factors such as the surface charges, these results might provide a fresh perspective on the ``century-old" Armstrong liquid bridge to further elucidate its underlying physical mechanism.

physics.flu-dyn↗

Device-Cloud Collaborative Learning for Recommendation

With the rapid development of storage and computing power on mobile devices, it becomes critical and popular to deploy models on devices to save onerous communication latencies and to capture real-time features. While quite a lot of works have explored to facilitate on-device learning and inference, most of them focus on dealing with response delay or privacy protection. Little has been done to model the collaboration between the device and the cloud modeling and benefit both sides jointly. To bridge this gap, we are among the first attempts to study the Device-Cloud Collaborative Learning (DCCL) framework. Specifically, we propose a novel MetaPatch learning approach on the device side to efficiently achieve "thousands of people with thousands of models" given a centralized cloud model. Then, with billions of updated personalized device models, we propose a "model-over-models" distillation algorithm, namely MoMoDistill, to update the centralized cloud model. Our extensive experiments over a range of datasets with different settings demonstrate the effectiveness of such collaboration on both cloud and devices, especially its superiority to model long-tailed users.

cs.LG↗

Efficient Fizeau Drag from Dirac electrons in monolayer graphene

Fizeau demonstrated in 1850 that the speed of light can be modified when it is propagating in moving media. Can we achieve such control of the light speed efficiently with a fast-moving electron media by passing electrical current? Because the strong electromagnetic coupling between the electron and light leads to the collective excitation of plasmon polaritons, it will manifest as the plasmonic Doppler effect. Experimental observation of the plasmonic Doppler effect in electronic system has been challenge because the plasmon propagation speed is much faster than the electron drift velocity in conventional noble metals. Here, we report direct observation of Fizeau drag of plasmon polaritons in strongly biased graphene by exploiting the high electron mobility and the slow plasmon propagation of massless Dirac electrons. The large bias current in graphene creates a fast drifting Dirac electron medium hosting the plasmon polariton. It results in nonreciprocal plasmon propagation, where plasmons moving with the drifting electron media propagate at an enhanced speed. We measure the Doppler-shifted plasmon wavelength using a cryogenic near-field infrared nanoscopy, which directly images the plasmon polariton mode in the biased graphene at low temperature. We observe a plasmon wavelength difference up to 3.6% between plasmon moving along and against the drifting electron media. Our findings on the plasmonic Doppler effect open new opportunities for electrical control of non-reciprocal surface plasmon polaritons in nonequilibrium systems.

physics.optics↗

IoTAthena: Unveiling IoT Device Activities from Network Traffic

The recent spate of cyber attacks towards Internet of Things (IoT) devices in smart homes calls for effective techniques to understand, characterize, and unveil IoT device activities. In this paper, we present a new system, named IoTAthena, to unveil IoT device activities from raw network traffic consisting of timestamped IP packets. IoTAthena characterizes each IoT device activity using an activity signature consisting of an ordered sequence of IP packets with inter-packet time intervals. IoTAthena has two novel polynomial time algorithms, sigMatch and actExtract. For any given signature, sigMatch can capture all matches of the signature in the raw network traffic. Using sigMatch as a subfunction, actExtract can accurately unveil the sequence of various IoT device activities from the raw network traffic. Using the network traffic of heterogeneous IoT devices collected at the router of a real-world smart home testbed and a public IoT dataset, we demonstrate that IoTAthena is able to characterize and generate activity signatures of IoT device activities and accurately unveil the sequence of IoT device activities from raw network traffic.

cs.NI↗