arXiv subjects

Feng Liu

Publications and source records attributed to Feng Liu.

At least 433 records · Page 24Linked to original sources

arXiv2023

AliasNet: Alias Artefact Suppression Network for Accelerated Phase-Encode MRI

Sparse reconstruction is an important aspect of MRI, helping to reduce acquisition time and improve spatial-temporal resolution. Popular methods are based mostly on compressed sensing (CS), which relies on the random sampling of k-space to produce incoherent (noise-like) artefacts. Due to hardware constraints, 1D Cartesian phase-encode under-sampling schemes are popular for 2D CS-MRI. However, 1D under-sampling limits 2D incoherence between measurements, yielding structured aliasing artefacts (ghosts) that may be difficult to remove assuming a 2D sparsity model. Reconstruction algorithms typically deploy direction-insensitive 2D regularisation for these direction-associated artefacts. Recognising that phase-encode artefacts can be separated into contiguous 1D signals, we develop two decoupling techniques that enable explicit 1D regularisation and leverage the excellent 1D incoherence characteristics. We also derive a combined 1D + 2D reconstruction technique that takes advantage of spatial relationships within the image. Experiments conducted on retrospectively under-sampled brain and knee data demonstrate that combination of the proposed 1D AliasNet modules with existing 2D deep learned (DL) recovery techniques leads to an improvement in image quality. We also find AliasNet enables a superior scaling of performance compared to increasing the size of the original 2D network layers. AliasNet therefore improves the regularisation of aliasing artefacts arising from phase-encode under-sampling, by tailoring the network architecture to account for their expected appearance. The proposed 1D + 2D approach is compatible with any existing 2D DL recovery technique deployed for this application.

eess.IV↗

arXiv2023

Numerical Investigation of Diffusion Flame in Transonic Flow with Large Pressure Gradient

A finite-volume method for the steady, compressible, reacting, turbulent Navier-Stokes equations is developed by using a steady-state preserving splitting scheme for the stiff source terms in chemical reaction. Laminar and turbulent reacting flows in a mixing layer with large streamwise pressure gradient are studied and compared to boundary-layer solutions. It reveals that chemical reaction strongly enhances turbulent transport due to intensive production of turbulence by the increased velocity gradients and thus produces large turbulent viscosity in the reaction region. Influence of vitiated air on the combustion process and aerodynamic performance is also investigated for the cases of turbulent mixing layer and highly-loaded transonic turbine cascade. Both cases indicate viability for the turbine-burner concept.

physics.flu-dyn↗

arXiv2023

PINF: Continuous Normalizing Flows for Physics-Constrained Deep Learning

The normalization constraint on probability density poses a significant challenge for solving the Fokker-Planck equation. Normalizing Flow, an invertible generative model leverages the change of variables formula to ensure probability density conservation and enable the learning of complex data distributions. In this paper, we introduce Physics-Informed Normalizing Flows (PINF), a novel extension of continuous normalizing flows, incorporating diffusion through the method of characteristics. Our method, which is mesh-free and causality-free, can efficiently solve high dimensional time-dependent and steady-state Fokker-Planck equations.

cs.LG↗

arXiv2023

Learning Clothing and Pose Invariant 3D Shape Representation for Long-Term Person Re-Identification

Long-Term Person Re-Identification (LT-ReID) has become increasingly crucial in computer vision and biometrics. In this work, we aim to extend LT-ReID beyond pedestrian recognition to include a wider range of real-world human activities while still accounting for cloth-changing scenarios over large time gaps. This setting poses additional challenges due to the geometric misalignment and appearance ambiguity caused by the diversity of human pose and clothing. To address these challenges, we propose a new approach 3DInvarReID for (i) disentangling identity from non-identity components (pose, clothing shape, and texture) of 3D clothed humans, and (ii) reconstructing accurate 3D clothed body shapes and learning discriminative features of naked body shapes for person ReID in a joint manner. To better evaluate our study of LT-ReID, we collect a real-world dataset called CCDA, which contains a wide variety of human activities and clothing changes. Experimentally, we show the superior performance of our approach for person ReID.

cs.CV↗

arXiv2023

FarSight: A Physics-Driven Whole-Body Biometric System at Large Distance and Altitude

Whole-body biometric recognition is an important area of research due to its vast applications in law enforcement, border security, and surveillance. This paper presents the end-to-end design, development and evaluation of FarSight, an innovative software system designed for whole-body (fusion of face, gait and body shape) biometric recognition. FarSight accepts videos from elevated platforms and drones as input and outputs a candidate list of identities from a gallery. The system is designed to address several challenges, including (i) low-quality imagery, (ii) large yaw and pitch angles, (iii) robust feature extraction to accommodate large intra-person variabilities and large inter-person similarities, and (iv) the large domain gap between training and test sets. FarSight combines the physics of imaging and deep learning models to enhance image restoration and biometric feature encoding. We test FarSight's effectiveness using the newly acquired IARPA Biometric Recognition and Identification at Altitude and Range (BRIAR) dataset. Notably, FarSight demonstrated a substantial performance increase on the BRIAR dataset, with gains of +11.82% Rank-20 identification and +11.3% TAR@1% FAR.

cs.CV↗

arXiv2023

Multi-Stage Expansion Planning for Decarbonizing Thermal Generation Supported Renewable Power Systems Using Hydrogen and Ammonia Storage

Large-scale centralized development of wind and solar energy and peer-to-grid transmission of renewable energy source (RES) via high voltage direct current (HVDC) has been regarded as one of the most promising ways to achieve goals of peak carbon and carbon neutrality in China. Traditionally, large-scale thermal generation is needed to economically support the load demand of HVDC with a given profile, which in turn raises concerns about carbon emissions. To address the issues above, hydrogen energy storage system (HESS) and ammonia energy storage system (AESS) are introduced to gradually replace thermal generation, which is represented as a multi-stage expansion planning (MSEP) problem. Specifically, first, HESS and AESS are established in the MSEP model with carbon emission reduction constraints, and yearly data with hourly time resolution are utilized for each stage to well describe the intermittence of RES. Then, a combined Dantzig-Wolfe decomposition (DWD) and column generation (CG) solution approach is proposed to efficiently solve the large-scale MSEP model. Finally, a real-life system in China is studied. The results indicate that HESS and AESS have the potential to handle the intermittence of RES, as well as the monthly imbalance between RES and load demand. Especially under the goal of carbon neutrality, the contribution of HESS and AESS in reducing levelized cost of energy (LCOE) reaches 12.28% and 14.59%, respectively, which finally leads to a LCOE of 0.4324 RMB/kWh.

eess.SY↗

arXiv2023

Quantitative Susceptibility Mapping through Model-based Deep Image Prior (MoDIP)

The data-driven approach of supervised learning methods has limited applicability in solving dipole inversion in Quantitative Susceptibility Mapping (QSM) with varying scan parameters across different objects. To address this generalization issue in supervised QSM methods, we propose a novel training-free model-based unsupervised method called MoDIP (Model-based Deep Image Prior). MoDIP comprises a small, untrained network and a Data Fidelity Optimization (DFO) module. The network converges to an interim state, acting as an implicit prior for image regularization, while the optimization process enforces the physical model of QSM dipole inversion. Experimental results demonstrate MoDIP's excellent generalizability in solving QSM dipole inversion across different scan parameters. It exhibits robustness against pathological brain QSM, achieving over 32% accuracy improvement than supervised deep learning and traditional iterative methods. It is also 33% more computationally efficient and runs 4 times faster than conventional DIP-based approaches, enabling 3D high-resolution image reconstruction in under 4.5 minutes.

eess.IV↗

arXiv2023

Three-dimensional echo-shifted EPI with simultaneous blip-up and blip-down acquisitions for correcting geometric distortion

Purpose: Echo-planar imaging (EPI) with blip-up/down acquisition (BUDA) can provide high-quality images with minimal distortions by using two readout trains with opposing phase-encoding gradients. Because of the need for two separate acquisitions, BUDA doubles the scan time and degrades the temporal resolution when compared to single-shot EPI, presenting a major challenge for many applications, particularly functional MRI (fMRI). This study aims at overcoming this challenge by developing an echo-shifted EPI BUDA (esEPI-BUDA) technique to acquire both blip-up and blip-down datasets in a single shot. Methods: A three-dimensional (3D) esEPI-BUDA pulse sequence was designed by using an echo-shifting strategy to produce two EPI readout trains. These readout trains produced a pair of k-space datasets whose k-space trajectories were interleaved with opposite phase-encoding gradient directions. The two k-space datasets were separately reconstructed using a 3D SENSE algorithm, from which time-resolved B0-field maps were derived using TOPUP in FSL and then input into a forward model of joint parallel imaging reconstruction to correct for geometric distortion. In addition, Hankel structured low-rank constraint was incorporated into the reconstruction framework to improve image quality by mitigating the phase errors between the two interleaved k-space datasets. Results: The 3D esEPI-BUDA technique was demonstrated in a phantom and an fMRI study on healthy human subjects. Geometric distortions were effectively corrected in both phantom and human brain images. In the fMRI study, the visual activation volumes and their BOLD responses were comparable to those from conventional 3D echo-planar images. Conclusion: The improved imaging efficiency and dynamic distortion correction capability afforded by 3D esEPI-BUDA are expected to benefit many EPI applications.

physics.med-ph↗

arXiv2023

Time-to-event estimands and loss to follow-up in oncology in light of the estimands framework

Time-to-event estimands are central to many oncology clinical trials. The estimand framework (addendum to the ICH E9 guideline) calls for precisely defining the treatment effect of interest to align with the clinical question of interest and requires predefining the handling of intercurrent events that occur after treatment initiation and either preclude the observation of an event of interest or impact the interpretation of the treatment effect. We discuss a practical problem in clinical trial design and execution, i.e. in some clinical contexts it is not feasible to systematically follow patients to an event of interest. Loss to follow-up in the presence of intercurrent events can affect the meaning and interpretation of the study results. We provide recommendations for trial design, stressing the need for close alignment of the clinical question of interest and study design, impact on data collection and other practical implications. When patients cannot be systematically followed, compromise may be necessary to select the best available estimand that can be feasibly estimated under the circumstances. We discuss the use of sensitivity and supplementary analyses to examine assumptions of interest.

stat.AP↗

arXiv2023

Higher-order Topological Point State

Higher-order topological insulators (HOTIs) have attracted increasing interest as a unique class of topological quantum materials. One distinct property of HOTIs is the crystalline symmetry-imposed topological state at the lower-dimensional outer boundary, e.g. the zero-dimensional (0D) corner state of a 2D HOTI, used exclusively as a universal signature to identify higher-order topology but yet with uncertainty. Strikingly, we discover the existence of inner topological point states (TPS) in a 2D HOTI, as the embedded "end" states of 1D first-order TI, as exemplified by those located at the vacancies in a Kekule lattice. Significantly, we demonstrate that such inner TPS can be unambiguously distinguished from the trivial point-defect states, by their unique topology-endowed inter-TPS interaction and correlated magnetic response in spectroscopy measurements, overcoming an outstanding experimental challenge. Furthermore, based on first-principles calculations, we propose γ-graphyne as a promising material to observe the higher-order TPS. Our findings shed new light on our fundamental understanding of HOTIs, and also open an avenue to experimentally distinguishing and tuning TPS in the interior of a 2D sample for potential applications.

cond-mat.mtrl-sci↗

arXiv2023

Combustion Dynamics of Ten-injector Rocket Engine Using Flamelet Progress Variable

The combustion instability is investigated computationally for a ten-injector rocket engine using the compressible flamelet progress variable (FPV) model and detached eddy simulation (DES). An C++ code is developed based on OpenFOAM 4.1 to apply the combustion model. Flamelet tables are generated for methane/oxygen combustion at the background pressure of 200 bar using a 12-species chemical mechanism. The flames at this high pressure level are found having similar structures as those at much lower pressures. A power law is determined to rescale the reaction rate for the progress variable to address the pressure effect. The combustion is also simulated by the one-step-kinetics (OSK) model for comparison with the FPV model. Premixed and diffusion flames are identified locally for both the FPV and OSK models. Study of combustion instability shows that a combined first longitudinal and first tangential mode of 3200 Hz is dominant for the FPV model while the OSK model favors a pure first tangential mode of 2600 Hz. The coupling among pressure oscillation, unsteady transverse flow and helicity fluctuation is discussed. A preliminary study of the resonance in the injectors, which is driven by the acoustic oscillation in the combustion chamber, is also presented.

physics.flu-dyn↗

arXiv2023

Coherent control of a high-orbital hole in a semiconductor quantum dot

Coherently driven semiconductor quantum dots are one of the most promising platforms for non-classical light sources and quantum logic gates which form the foundation of photonic quantum technologies. However, to date, coherent manipulation of single charge carriers in quantum dots is limited mainly to their lowest orbital states. Ultrafast coherent control of high-orbital states is obstructed by the demand for tunable terahertz pulses. To break this constraint, we demonstrate an all-optical method to control high-orbital states of a hole via stimulated Auger process. The coherent nature of the Auger process is proved by Rabi oscillation and Ramsey interference. Harnessing this coherence further enables the investigation of single-hole relaxation mechanism. A hole relaxation time of 161 ps is observed and attributed to the phonon bottleneck effect. Our work opens new possibilities for understanding the fundamental properties of high-orbital states in quantum emitters and developing new types of orbital-based quantum photonic devices.

quant-ph↗

arXiv2023

Diversity-enhancing Generative Network for Few-shot Hypothesis Adaptation

Generating unlabeled data has been recently shown to help address the few-shot hypothesis adaptation (FHA) problem, where we aim to train a classifier for the target domain with a few labeled target-domain data and a well-trained source-domain classifier (i.e., a source hypothesis), for the additional information of the highly-compatible unlabeled data. However, the generated data of the existing methods are extremely similar or even the same. The strong dependency among the generated data will lead the learning to fail. In this paper, we propose a diversity-enhancing generative network (DEG-Net) for the FHA problem, which can generate diverse unlabeled data with the help of a kernel independence measure: the Hilbert-Schmidt independence criterion (HSIC). Specifically, DEG-Net will generate data via minimizing the HSIC value (i.e., maximizing the independence) among the semantic features of the generated data. By DEG-Net, the generated unlabeled data are more diverse and more effective for addressing the FHA problem. Experimental results show that the DEG-Net outperforms existing FHA baselines and further verifies that generating diverse data plays a vital role in addressing the FHA problem

cs.LG↗

arXiv2023

Learning Constrained Corner Node Trajectories of a Tether Net System for Space Debris Capture

The earth's orbit is becoming increasingly crowded with debris that poses significant safety risks to the operation of existing and new spacecraft and satellites. The active tether-net system, which consists of a flexible net with maneuverable corner nodes launched from a small autonomous spacecraft, is a promising solution for capturing and disposing of such space debris. The requirement of autonomous operation and the need to generalize over scenarios with debris scenarios in different rotational rates makes the capture process significantly challenging. The space debris could rotate about multiple axes, which, along with sensing/estimation and actuation uncertainties, calls for a robust, generalizable approach to guiding the net launch and flight - one that can guarantee robust capture. This paper proposes a decentralized actuation system combined with reinforcement learning for planning and controlling this tether-net system. In this new system, four microsatellites with cold gas type thrusters act as the corner nodes of the net and can thus help control or correct the flight of the net after launch. The microsatellites pull the net to complete the task of approaching and capturing the space debris. The proposed method uses a RL framework that integrates a proximal policy optimization to find the optimal solution based on the dynamics simulation of the net and the microsatellites performed in Vortex Studio. The RL framework finds the optimal trajectory that is both fuel-efficient and ensures a desired level of capture quality.

eess.SY↗

arXiv2023

CoverHunter: Cover Song Identification with Refined Attention and Alignments

Abstract: Cover song identification (CSI) focuses on finding the same music with different versions in reference anchors given a query track. In this paper, we propose a novel system named CoverHunter that overcomes the shortcomings of existing detection schemes by exploring richer features with refined attention and alignments. CoverHunter contains three key modules: 1) A convolution-augmented transformer (i.e., Conformer) structure that captures both local and global feature interactions in contrast to previous methods mainly relying on convolutional neural networks; 2) An attention-based time pooling module that further exploits the attention in the time dimension; 3) A novel coarse-to-fine training scheme that first trains a network to roughly align the song chunks and then refines the network by training on the aligned chunks. At the same time, we also summarize some important training tricks used in our system that help achieve better results. Experiments on several standard CSI datasets show that our method significantly improves over state-of-the-art methods with an embedding size of 128 (2.3% on SHS100K-TEST and 17.7% on DaTacos).

cs.SD↗

arXiv2023

Taming Self-Supervised Learning for Presentation Attack Detection: De-Folding and De-Mixing

Biometric systems are vulnerable to Presentation Attacks (PA) performed using various Presentation Attack Instruments (PAIs). Even though there are numerous Presentation Attack Detection (PAD) techniques based on both deep learning and hand-crafted features, the generalization of PAD for unknown PAI is still a challenging problem. In this work, we empirically prove that the initialization of the PAD model is a crucial factor for the generalization, which is rarely discussed in the community. Based on such observation, we proposed a self-supervised learning-based method, denoted as DF-DM. Specifically, DF-DM is based on a global-local view coupled with De-Folding and De-Mixing to derive the task-specific representation for PAD. During De-Folding, the proposed technique will learn region-specific features to represent samples in a local pattern by explicitly minimizing generative loss. While De-Mixing drives detectors to obtain the instance-specific features with global information for more comprehensive representation by minimizing interpolation-based consistency. Extensive experimental results show that the proposed method can achieve significant improvements in terms of both face and fingerprint PAD in more complicated and hybrid datasets when compared with state-of-the-art methods. When training in CASIA-FASD and Idiap Replay-Attack, the proposed method can achieve an 18.60% Equal Error Rate (EER) in OULU-NPU and MSU-MFSD, exceeding baseline performance by 9.54%. The source code of the proposed technique is available at https://github.com/kongzhecn/dfdm.

cs.CV↗

arXiv2023

Detecting Adversarial Data by Probing Multiple Perturbations Using Expected Perturbation Score

Adversarial detection aims to determine whether a given sample is an adversarial one based on the discrepancy between natural and adversarial distributions. Unfortunately, estimating or comparing two data distributions is extremely difficult, especially in high-dimension spaces. Recently, the gradient of log probability density (a.k.a., score) w.r.t. the sample is used as an alternative statistic to compute. However, we find that the score is sensitive in identifying adversarial samples due to insufficient information with one sample only. In this paper, we propose a new statistic called expected perturbation score (EPS), which is essentially the expected score of a sample after various perturbations. Specifically, to obtain adequate information regarding one sample, we perturb it by adding various noises to capture its multi-view observations. We theoretically prove that EPS is a proper statistic to compute the discrepancy between two samples under mild conditions. In practice, we can use a pre-trained diffusion model to estimate EPS for each sample. Last, we propose an EPS-based adversarial detection (EPS-AD) method, in which we develop EPS-based maximum mean discrepancy (MMD) as a metric to measure the discrepancy between the test sample and natural samples. We also prove that the EPS-based MMD between natural and adversarial samples is larger than that among natural samples. Extensive experiments show the superior adversarial detection performance of our EPS-AD.

cs.LG↗

arXiv2023

DADIN: Domain Adversarial Deep Interest Network for Cross Domain Recommender Systems

Click-Through Rate (CTR) prediction is one of the main tasks of the recommendation system, which is conducted by a user for different items to give the recommendation results. Cross-domain CTR prediction models have been proposed to overcome problems of data sparsity, long tail distribution of user-item interactions, and cold start of items or users. In order to make knowledge transfer from source domain to target domain more smoothly, an innovative deep learning cross-domain CTR prediction model, Domain Adversarial Deep Interest Network (DADIN) is proposed to convert the cross-domain recommendation task into a domain adaptation problem. The joint distribution alignment of two domains is innovatively realized by introducing domain agnostic layers and specially designed loss, and optimized together with CTR prediction loss in a way of adversarial training. It is found that the Area Under Curve (AUC) of DADIN is 0.08% higher than the most competitive baseline on Huawei dataset and is 0.71% higher than its competitors on Amazon dataset, achieving the state-of-the-art results on the basis of the evaluation of this model performance on two real datasets. The ablation study shows that by introducing adversarial method, this model has respectively led to the AUC improvements of 2.34% on Huawei dataset and 16.67% on Amazon dataset.

cs.IR↗