arXiv Science⌕ Search

arXiv subjects

Federico Nespoli

Publications and source records attributed to Federico Nespoli.

3 recordsLinked to original sources

Analysis of Solid Boron Injection for ITER

Since ITER will now operate with a full tungsten divertor and first wall, the ITER Organization is considering boron wall conditioning schemes to getter oxygen and reduce tungsten sputtering to avoid excessive radiation to ensure that ITER can reach and sustain high- performance plasma operation. ITER has adopted Glow Discharge Boronization (GDB) in deuterated diborane (B$_2$D$_6$) as its main technique, which can only be performed in the absence of magnetic fields, but has also requested a study to determine how effective solid boron injection (SBI), which can be performed during plasma operation, using either an Impurity Powder Dropper (IPD) or a boron pellet injector, might be as a risk mitigation to achieving Q=10. Solid impurity injection has been used for decades as a wall conditioning technique on numerous tokamaks and stellarators around the world. The study presented here begins to assess SBI on ITER by first quantifying the boron source term across a particle size scan from 1 $μ$m to 5 mm diameter and an injection velocity scan from 5 -- 200 m/s for several ITER plasma conditions: 1) Start of Research Operations (SRO) diverted L-mode, 2) Q=10 H-mode, and 3) low plasma current and low power limiter operation. Modeling of the ablation, transport, erosion and redeposition of solid boron is being carried out with the Dust Injection Simulator (DIS), the Neutral Gas Shielding (NGS), EMC3-EIRENE and WallDYN3D models. In the first steps presented here, the DIS and NGS models are compared for calculating the boron source term that is then used as input to EMC3-EIRENE and will later be used with WallDYN3D.

physics.plasm-ph↗

Enhancement of Mid-/High-Z Impurity Transport by Continuous Li-granule Dropping in a Stellarator Plasma

An enhancement of core impurity transport is observed in high-density plasmas of the stellarator LHD heated by neutral beam injection when continuous lithium (Li) granule dropping is performed. In the experiments reported here, in which the TESPEL is employed to inject trace amounts of titanium (Ti) and molybdenum (Mo) into the plasma core, confinement times for these impurities are seen to reduce significantly when Li dropping is applied, this reduction being more notable for Mo. In order to gain some initial insight into these observations, simulations are performed using the drift-kinetic transport code SFINCS for the Mo case. These simulations indicate that, while neoclassical transport prevails for the main plasma components (electrons, majority ions and low Z impurities), the classical contribution seems to be dominant for transporting Mo impurities. In summary, this work reports the first experimental observation of the degradation of mid-Z and high-Z impurity confinement induced by the continuous dropping of Li granules into a high-density stellarator plasma. In the case of the Mo impurity, simulations suggest that classical transport is the key mechanism underlying the enhanced impurity transport.

physics.plasm-ph↗

Integrated modeling of boron powder injection for real-time plasma-facing component conditioning

An integrated modeling framework for investigating the application of solid boron powder injection for real-time surface conditioning of plasma-facing components in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper setup, this study simulates B powder injection scenarios ranging from mg/s to tens of mg/s, corresponding to B flux rates of $10^{20}-10^{21}$ B/s in standard L-mode conditions. The comprehensive modeling approach combines EMC3-EIRENE for simulating the D plasma background and DIS for the ablation and transport of the B powder particles. The results show substantial transport of B to the inboard lower divertor, predominantly influenced by the main ion plasma flow. The dependency on powder particle size (5-250 $μ$m) was found to be insignificant for the scenario considered. The effects of erosion and redeposition were considered to reconcile the discrepancies with experimental observations, which saw substantial deposition on the outer divertor PFCs. For this purpose, the WallDYN3D code was updated to include B sources within the plasma domain and integrated into the modeling framework. The mixed-material migration modeling shows evolving B deposition patterns, suggesting the formation of mixed B-C layers or predominantly B coverage depending on the powder mass flow rate. While the modeling outcomes at lower B injection rates tend to align with experimental observations, the prediction of near-pure B layers at higher rates has yet to be experimentally verified in the C environment of the DIII-D tokamak. The extensive reach of B layers found in the modeling suggests the need for modeling that encompasses the entire wall geometry for more accurate experimental correlations. This integrated approach sets a precedent for analyzing and applying real-time in-situ boron coating techniques in advanced tokamak scenarios, potentially extendable to ITER.

physics.plasm-ph↗