arXiv subjects

Fathollah Varnik

Publications and source records attributed to Fathollah Varnik.

At least 19 recordsLinked to original sources

arXiv2025

A low-Mach phase field-lattice Boltzmann-finite difference model for reactive gas flows propagating through complex shaped particle assemblies

The present study provides a systematic derivation of a phase-field version of the momentum, mass and heat transport equations, while accounting for chemical reactions in the fluid phase. To achieve this goal, the volume averaging technique is used to reformulate the conservation equations in the presence of multiple phases and their respective diffuse interfaces. It is shown that the structure of the multiphase/diffuse interface version of the conservation equations is very similar to the original single phase/sharp interface formulation. The multiphase character of the problem is accounted for the coupling terms, which act at the interface between adjacent phases. For the special case of a reactive fluid in contact with an inert solid, two coupling parameters are introduced, which control the exchange of momentum and heat at the interface. For numerical solver, a low-Mach number hybrid lattice Boltzmann-finite difference-phase field (LB-FD-PF) framework is developed and implemented in the open source software OpenPhase Academic. Chemical reactions of reactive flows are included into the model by coupling OpenPhase Academic with the open-source chemical kinetics software CANTERA, which delivers details of the chemical reaction mechanisms and the necessary thermodynamic and transport properties of the reacting chemical species. The model is thoroughly validated against alternative numerical simulations of reactive flows as well as experiments.

physics.flu-dyn↗

arXiv2024

Parametric 3D Convolutional Autoencoder for the Prediction of Flow Fields in a Bed Configuration of Hot Particles

The use of deep learning methods for modeling fluid flow has drawn a lot of attention in the past few years. In situations where conventional numerical approaches can be computationally expensive, these techniques have shown promise in offering accurate, rapid, and practical solutions for modeling complex fluid flow problems. The success of deep learning is often due to its ability to extract hidden patterns and features from the data, enabling the creation of data-driven reduced models that can capture the underlying physics of the domain. We present a data-driven reduced model for predicting flow fields in a bed configuration of hot particles. The reduced model consists of a parametric 3D convolutional autoencoder. The first part resolves the spatial and temporal dependencies present in the input sequence, while the second part of the architecture is responsible for predicting the solution at the subsequent timestep based on the information gathered from the preceding part. We also propose the utilization of a post-processing non-trainable output layer following the decoding path to incorporate the physical knowledge, e.g., no-slip condition, into the prediction. The evaluation of the reduced model for a bed configuration with variable particle temperature showed accurate results at a fraction of the computational cost required by traditional numerical simulation methods.

physics.flu-dyn↗

arXiv2023

Modeling gas flows in packed beds with the lattice Boltzmann method: validation against experiments

This study aims to validate the lattice Boltzmann method and assess its ability to accurately describe the behavior of gaseous flows in packed beds. To that end, simulations of a model packed bed reactor, corresponding to an experimental bench, are conducted, and the results are directly compared with experimental data obtained by Particle Image Velocimetry measurements. It is found that the lattice Boltzmann solver exhibits very good agreement with experimental measurements. Then, the numerical solver is further used to analyze the effect of the number of packing layers on the flow structure and to determine the minimum bed height above which the changes in flow structure become insignificant. Finally, flow fluctuations in time are discussed. The findings of this study provide valuable insights into the behavior of the gas flow in packed bed reactors, opening the door for further investigations involving additionally chemical reactions, as found in many practical applications.

physics.flu-dyn↗

arXiv2021

Non-monotonic effect of confinement on the glass transition

The relaxation dynamics of glass forming liquids and their structure are influenced in the vicinity of confining walls. In view of the great potential of this effect for applications in those fields of science and industry, where liquids occur under strong confinement (e.g., nano-technology), the number of researchers studying various aspects and consequences of this non-monotonic behaviour has been rapidly growing. This review aims at providing an overview of the research activity in this newly emerging field. We first briefly discuss how competing mechanisms such as packing effects and short-range attraction may lead to a non-monotonic glass transition scenario in the bulk. We then analyse confinement effects on the dynamics of fluids using a thermodynamic route which relates the single particle dynamics to the excess entropy. Moreover, relating the diffusive dynamics to the Widom's insertion probability, the oscillations of the local dynamics with density at moderate densities are fairly well described. At high densities belonging to the supercooled regime, however, this approach breaks down signaling the onset of strongly collective effects. Indeed, confinement introduces a new length scale which in the limit of high densities and small pore sizes competes with the short-range local order of the fluid. This gives rise to a non-monotonic dependence of the packing structure on confinement, with a corresponding effect on the dynamics of structural relaxation. This non-monotonic effect occurs also in the case of a cone-plate type channel, where the degree of confinement varies with distance from the apex. This is a very promising issue for future research with the possibility of uncovering the existence of alternating glassy and liquid-like domains.

cond-mat.soft↗

arXiv2020

Multi-phase-field modeling of microstructure evolution in metallic foams

This paper represents a model for microstructure formation in metallic foams based on the multi-phase-field (MPF) approach. By the use of a no-coalescence boundary condition within this MPF-framework, it is possible to completely prevent coalescence of bubbles and thus focus on the formation of a closed porous microstructure. A modification of this non-wetting criterion allows for the controlled initiation of coalescence and the evolution of open structures. The method is validated and used to simulate foam structure formation both in two and three dimensions.

physics.comp-ph↗

arXiv2020

Simulation of Capillary-Driven Kinetics with Multi-Phase-Field and Lattice-Boltzmann Method

We propose a combined computational approach based on the multi-phase-field and the lattice Boltzmann method for the motion of solid particles under the action of capillary forces. The accuracy of the method is analyzed by comparison with the analytic solutions for the motion of two parallel plates of finite extension connected by a capillary bridge. The method is then used to investigate the dynamics of multiple spherical solid bodies connected via capillary bridges. The amount of liquid connecting the spheres is varied, and the influence of the resulting liquid-morphology on their dynamics is investigated. It is shown that the method is suitable for a study of liquid-phase sintering which includes both phase transformation and capillary driven rigid body motion.

physics.flu-dyn↗

arXiv2020

Self similarity of the expanding universe as understood by quantum-phase-fields

An idea of the universe as a self-contained system of interacting fields as a closed doublon network is developed. The characteristic scale of this system is considered emergent from general principles. Self similarity of patterns in the universe can be understood by introducing a characteristic scale with respect towhich patterns are evaluated. The developed physical-mathematical model is in good agreement with cosmological length scales and gives a rationale of the empirical fact for an expanding universe. Within the framework of the de~Broglie-Bohm double solution program, the model can be applied to rationalize the existence of a ground potential and a cosmological constant.

physics.gen-ph↗

arXiv2019

Multiple character of non-monotonic size-dependence for relaxation dynamics in polymer-particle and binary mixtures

Adding plasticizers is a well-known procedure to reduce the glass transition temperature in polymers. It has been recently shown that this effect shows a non-monotonic dependence on the size of additive molecules [The Journal of Chemical Physics 150 (2019) 024903]. In this work, we demonstrate that, as the size of the additive molecules is changed at fixed concentration, multiple extrema emerge in the dependence of the system's relaxation time on the size ratio. The effect occurs on all relevant length scales including single monomer dynamics, decay of Rouse modes and relaxation of the chain's end-to-end vector. A qualitatively similar trend is found within mode-coupling theoretical results for a binary hard-sphere (HS) mixture. An interpretation of the effect in terms of local packing efficiency and coupling between the dynamics of minority and majority species is provided.

cond-mat.soft↗

arXiv2019

A crossover in spatio-temporal correlations of strain fluctuations in glass forming liquids

Via molecular dynamics simulations of a generic glass former in the supercooled and normal liquid states, it is shown that spatial correlations of strain fluctuations exhibit a crossover from the well-established power-law $\sim 1/r^3$-decay at long wavelengths to an exponential behavior, $\sim \exp(-r/l_{\text {c}})$ at intermediate distances. The characteristic length of the exponential decay grows both with temperature and time via, $l_{\text {c}}^2 \propto D(T)\, t$, with $D(T)$ being the temperature-dependent diffusion coefficient. This suggests that the crossover between the power-law and exponential decays is governed by a diffusion process.

cond-mat.soft↗

arXiv2019

Controlling bubble coalescence in metallic foams: A simple phase field-based approach

The phase-field method is used as a basis to develop a strictly mass conserving, yet simple, model for simulation of two-phase flow. The model is aimed to be applied for the study of structure evolution in metallic foams. In this regard, the critical issue is to control the rate of bubble coalescence compared to concurrent processes such as their rearrangement due to fluid motion. In the present model, this is achieved by tuning the interface energy as a free parameter. The model is validated by a number of benchmark tests. First, stability of a two dimensional bubble is investigated by the Young-Laplace law for different values of the interface energy. Then, the coalescence of two bubbles is simulated until the system reaches equilibrium with a circular shape. To address the major capability of the present model for the formation of foam structure, the bubble coalescence is simulated for various values of interface energy in order to slow down the merging process. These simulations are repeated in the presence of a rotational flow to highlight the fact that the model allows to suppress the coalescence process compared to the motion of bubbles relative to each other.

physics.comp-ph↗

arXiv2019

Diffuse interface models of solidification with convection: The choice of a finite interface thickness

The thin interface limit aims at minimizing the effects arising from a numerical interface thickness, inherent in diffuse interface models of solidification and microstructure evolution such as the phase field model. While the original formulation of this problem is restricted to transport by diffusion, we consider here the case of melt convection. Using an analysis of the coupled phase field-fluid dynamic equations, we show here that such a thin interface limit does also exist if transport contains both diffusion and convection. This prediction is tested by comparing simulation studies, which make use of the thin-interface condition, with an analytic sharp-interface theory for dendritic tip growth under convection.

cond-mat.mtrl-sci↗

arXiv2019

Non-monotonic effect of additive particle size on the glass transition in polymers

Effect of small additive molecules on the structural relaxation of polymer melts is investigated via molecular dynamics simulations. At a constant external pressure and a fixed number concentration of added molecules, the variation of particle diameter leads to a non-monotonic change of the relaxation dynamics of the polymer melt. For non-entangled chains, this effect is rationalized in terms of an enhanced added-particle-dynamics which competes with a weaker coupling strength upon decreasing the particle size. Interestingly, cooling simulations reveal a non-monotonic effect on the glass transition temperature also for entangled chains, where the effect of additives on polymer dynamics is more intricate. This observation underlines the importance of monomer-scale packing effects on the glass transition in polymers. In view of this fact, size-adaptive thermosensitive core-shell colloids would be a promising candidates route to explore this phenomenon experimentally.

cond-mat.soft↗

arXiv2019

Probing the degree of heterogeneity within a shear band of a model glass

Recent experiments provide evidence for density variations along shear bands (SB) in metallic glasses with a length scale of a few hundreds nanometers. Via molecular dynamics simulations of a generic binary glass model, here we show that this is strongly correlated with variations of composition, coordination number, viscosity and heat generation. Individual shear events along the SB-path show a mean distance of a few nanometers, comparable to recent experimental findings on medium range order. The aforementioned variations result from these localized perturbations, mediated by elasticity.

cond-mat.soft↗

arXiv2018

Long-range strain correlations in 3D quiescent glass forming liquids

We present a quantitative study of strain correlations in quiescent supercooled liquids and glasses. Recent two-dimensional computer simulations and experiments indicate that even supercooled liquids exhibit long-lived, long-range strain correlations. Here we investigate this issue in three dimensions via experiments on hard sphere colloids and molecular dynamics simulations of a glass forming binary Lennard Jones mixture. Both in the glassy state and in the supercooled regime, strain correlations are found to decay with a $1/r^{3}$ power-law behavior, reminiscent of elastic fields around an inclusion. Moreover, theoretical predictions on the time dependence of the correlation amplitude are in line with the results obtained from experiments and simulations. It is argued that the size of the domain, which exhibits a "solid-like" cooperative strain pattern in a supercooled liquid, is determined by the product of the speed of sound with the structural relaxation time. While this length is of the order of nanometers in the normal liquid state, it grows to macroscale when approaching the glass transition.

cond-mat.stat-mech↗

arXiv2018

Shear-density coupling for a compressible single-component yield-stress fluid

Flow behavior of a single-component yield stress fluid is addressed on the hydrodynamic level. A basic ingredient of the model is a coupling between fluctuations of density and velocity gradient via a Herschel-Bulkley-type constitutive model. Focusing on the limit of low shear rates and high densities, the model approximates well---but is not limited to---gently sheared hard sphere colloidal glasses, where solvent effects are negligible. A detailed analysis of the linearized hydrodynamic equations for fluctuations and the resulting cubic dispersion relation reveals the existence of a range of densities and shear rates with growing flow heterogeneity. In this regime, after an initial transient, the velocity and density fields monotonically reach a spatially inhomogeneous stationary profile, where regions of high shear rate and low density coexist with regions of low shear rate and high density. The steady state is thus maintained by a competition between shear-induced enhancement of density inhomogeneities and relaxation via overdamped sound waves. An analysis of the mechanical equilibrium condition provides a criterion for the existence of steady state solutions. The dynamical evolution of the system is discussed in detail for various boundary conditions, imposing either a constant velocity, shear rate, or stress at the walls.

cond-mat.soft↗

arXiv2017

A multi-phase-field method for surface tension-induced elasticity

A consistent treatment of the coupling of surface energy and elasticity within the multi-phase- field framework is presented. The model accurately reproduces stress distribution in a number of analytically tractable, yet non-trivial, cases including different types of spherical heterogeneities and a thin plate suspending in a gas environment. It is then used to study the stress distribution inside elastic bodies with non-spherical geometries, such as a solid ellipsoid and a sintered structure. In these latter cases, it is shown that the interplay between deformation and spatially variable surface curvature leads to heterogeneous stress distribution across the specimen.

cond-mat.mes-hall↗

arXiv2017

Multi-Phase-Field Model for Surface/Phase-Boundary Diffusion

The multi-phase-field approach is generalized to treat capillarity-driven diffusion parallel to the surfaces and phase-boundaries, i.e. the boundaries between a condensed phase and its vapor and the boundaries between two or multiple condensed phases. The effect of capillarity is modeled via curvature-dependence of the chemical potential whose gradient gives rise to diffusion. The model is used to study thermal grooving on the surface of a polycrystalline body. Decaying oscillations of the surface profile during thermal grooving, postulated by Hillert long ago but reported only in few studies so far, are observed and discussed. Furthermore, annealing of multi-nano-clusters on a deformable free surface is investigated using the proposed model. Results of these simulations suggest that the characteristic crater-like structure with an elevated perimeter, observed in recent experiments, is a transient non-equilibrium state during the annealing process.

cond-mat.mes-hall↗

arXiv2015

Aging in Structural Changes of Amorphous Solids: A Study of First Passage Time and Persistence Time Distribution

The time distribution of relaxation events in an aging system is investigated via molecular dynamics simulations. The focus is on the distribution functions of the first passage time, $p_1(Δt)$, and the persistence time, $p(τ)$. In contrast to previous reports, both $p_1$ and $p$ are found to evolve with time upon aging. The age dependence of the persistence time distribution is shown to be sensitive to the details of the algorithm used to extract it from particle trajectories. By updating the reference point in event detection algorithm and accounting for the event specific aging time, we uncover age dependence of $p(τ)$, hidden to previous studies. Moreover, the apparent age-dependence of $p_1$ in continuous time random walk with an age independent $p(τ)$ is shown to result from an implicit synchronization of all the random walkers at the starting time.

cond-mat.dis-nn↗