arXiv subjects

F. Patru

Publications and source records attributed to F. Patru.

7 recordsLinked to original sources

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2021

Progress of the CHARA/SPICA project

CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la C\^ote d'Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the required precision and sensitivity, CHARA/SPICA combines a low spectral resolution mode R = 140 in the visible and single-mode fibers fed by the AO stages of CHARA. This setup generates additional needs before the interferometric combination: the compensation of atmospheric refraction and longitudinal dispersion, and the fringe stabilization. In this paper, we present the main features of the 6-telescopes fibered visible beam combiner (SPICA-VIS) together with the first laboratory and on-sky results of the fringe tracker (SPICA-FT). We describe also the new fringe-tracker simulator developed in parallel to SPICA-FT.

astro-ph.IM↗

arXiv2016

VLTI-AMBER velocity-resolved aperture-synthesis imaging of Eta Carinae with a spectral resolution of 12000. Studies of the primary star wind and innermost wind-wind collision

Context. The mass loss from massive stars is not understood well. Eta Car is a unique object for studying the massive stellar wind during the LBV phase. It is also an eccentric binary with a period of 5.54 yr. The nature of both stars is uncertain, although we know from X-ray studies that there is a wind-wind collision whose properties change with orbital phase. Methods. Observations of Eta Car were carried out with the ESO VLTI and the AMBER instrument between approximately five and seven months before the August 2014 periastron passage. Velocity-resolved aperture-synthesis images were reconstructed from the spectrally dispersed interferograms. Interferometric studies can provide information on the binary orbit, the primary wind, and the wind collision. Results. We present velocity-resolved aperture-synthesis images reconstructed in more than 100 different spectral channels distributed across the Br Gamma 2.166 micrometer emission line. The intensity distribution of the images strongly depends on wavelength. At wavelengths corresponding to radial velocities of approximately -140 to -376 km/s measured relative to line center, the intensity distribution has a fan-shaped structure. At the velocity of -277 km/s, the position angle of the symmetry axis of the fan is ~ 126 degree. The fan-shaped structure extends approximately 8.0 mas (~ 18.8 au) to the southeast and 5.8 mas (~ 13.6 au) to the northwest, measured along the symmetry axis at the 16% intensity contour. The shape of the intensity distributions suggests that the obtained images are the first direct images of the innermost wind-wind collision zone. Therefore, the observations provide velocity-dependent image structures that can be used to test three-dimensional hydrodynamical, radiative transfer models of the massive interacting winds of Eta Car.

astro-ph.SR↗

arXiv2012

Fringe tracking performance monitoring: FINITO at VLTI

Since April 2011, realtime fringe tracking data are recorded simultaneously with data from the VLTI/AMBER interferometric beam combiner. Not only this offers possibilities to post-process AMBER reduced data to obtain more accurate interferometric quantities, it also allows to estimate the performance of the fringe tracking a function of the conditions of seeing, coherence time, flux, etc. First we propose to define fringe tracking performance metrics in the AMBER context, in particular as a function of AMBER's integration time. The main idea is to determine the optimal exposure time for AMBER: short exposures are dominated by readout noise and fringes in long exposures are completely smeared out. Then we present this performance metrics correlated with Paranal local ASM (Ambient Site Monitor) measurements, such as seeing, coherence time or wind speed for example. Finally, we also present some preliminary results of attempts to model and predict fringe tracking performances, using Artificial Neural Networks.

astro-ph.IM↗

arXiv2010

Direct imaging with highly diluted apertures. II. Properties of the point spread function of a hypertelescope

In the future, optical stellar interferometers will provide true images thanks to larger number of telescopes and to advanced cophasing subsystems. These conditions are required to have sufficient resolution elements (resel) in the image and to provide direct images in the hypertelescope mode. It has already been shown that hypertelescopes provide snapshot images with a significant gain in sensitivity without inducing any loss of the useful field of view for direct imaging applications. This paper aims at studying the properties of the point spread functions of future large arrays using the hypertelescope mode. Numerical simulations have been performed and criteria have been defined to study the image properties. It is shown that the choice of the configuration of the array is a trade-off between the resolution, the halo level and the field of view. A regular pattern of the array of telescopes optimizes the image quality (low halo level and maximum encircled energy in the central peak), but decreases the useful field of view. Moreover, a non-redundant array is less sensitive to the space aliasing effect than a redundant array.

astro-ph.IM↗

arXiv2007

Optimization of the direct imaging properties of an optical fibered long baseline interferometer

Long baseline interferometry is now a mature technique in the optical domain. Current interferometers are however highly limited in number of sub apertures and concepts are being developed for future generations of very large optical arrays and especially with the goal of direct imaging. In this paper, we study the effects of introducing single-mode fibers in direct imaging optical interferometers. We show how the flexibility of optical fibers is well adapted to the pupil densification scheme. We study the effects of the truncation of the gaussian beams in the imaging process, either in the Fizeau mode or in the densified pupil mode or in the densified image mode. Finally, in the pupil densification configuration, we identify an optimum of the diaphragm width. This optimum maximizes the on-axis irradiance and corresponds to a trade-off between the loss of transmission and the efficiency of the densification.

astro-ph↗

arXiv2006

Direct imaging with highly diluted apertures. I. Field of view limitations

Future optical interferometric instrumentation mainly relies on the availability of an efficient cophasing system: once available, what has so far postponed the relevance of direct imaging with an interferometer will vanish. This paper focuses on the actual limits of snapshot imaging, inherent to the use of a sparse aperture: the number of telescopes and the geometry of the array impose the maximum extent of the field of view and the complexity of the sources. A second limitation may arise from the beam combination scheme. Comparing already available solutions, we show that the so called hypertelescope mode (or densified pupil) is ideal. By adjusting the direct imaging field of view to the useful field of view offered by the array, the hypertelescope makes an optimal use of the collected photons. It optimizes signal to noise ratio, drastically improves the luminosity of images and makes the interferometer compatible with coronagraphy, without inducing any loss of useful field of view.

astro-ph↗