arXiv subjects

F. Mueller

Publications and source records attributed to F. Mueller.

11 recordsLinked to original sources

arXiv2021

$B$-flavor tagging at Belle II

We report on new flavor tagging algorithms developed to determine the quark-flavor content of bottom ($B$) mesons at Belle II. The algorithms provide essential inputs for measurements of quark-flavor mixing and charge-parity violation. We validate and evaluate the performance of the algorithms using hadronic $B$ decays with flavor-specific final states reconstructed in a data set corresponding to an integrated luminosity of $62.8$ fb$^{-1}$, collected at the $\Upsilon$(4$S$) resonance with the Belle II detector at the SuperKEKB collider. We measure the total effective tagging efficiency to be $\varepsilon_{\rm eff} = \big(30.0 \pm 1.2(\text{stat}) \pm 0.4(\text{syst})\big)\%$ for a category-based algorithm and $\varepsilon_{\rm eff} = \big(28.8 \pm 1.2(\text{stat}) \pm 0.4(\text{syst})\big)\%$ for a deep-learning-based algorithm.

hep-ex↗

arXiv2017

Passivation and characterization of charge defects in ambipolar silicon quantum dots

In this Report we show the role of charge defects in the context of the formation of electrostatically defined quantum dots. We introduce a barrier array structure to probe defects at multiple locations in a single device. We measure samples both before and after an annealing process which uses an Al$_2$O$_3$ overlayer, grown by atomic layer deposition. After passivation of the majority of charge defects with annealing we can electrostatically define hole quantum dots up to 180 nm in length. Our ambipolar structures reveal amphoteric charge defects that remain after annealing with charging energies of ~10 meV in both the positive and negative charge state.

cond-mat.mes-hall↗

arXiv2017

Development of a Highly Selective First-Level Muon Trigger for ATLAS at HL-LHC Exploiting Precision Muon Drift-Tube Data

The High-Luminosity LHC (HL-LHC) will provide the unique opportunity to explore the nature of physics beyond the Standard Model of strong and electroweak interactions. Highly selective first-level triggers are essential for the physics programme of the ATLAS experiment at HL-LHC, where the instantaneous luminosity will exceed the instantaneous LHC Run 1 luminosity by about an order of magnitude. The ATLAS first-level muon trigger rate is dominated by low momentum muons, which are accepted because of the moderate momentum resolution of the RPC and TGC trigger chambers. This limitation can be overcome by exploiting the data of the precision Muon Drift-Tube (MDT) chambers in the first-level trigger decision. This requires continuous fast transfer of the MDT hits to the off-detector trigger logic and fast track reconstruction algorithms. The reduction of the muon trigger rate achievable with the proposed new trigger concept, the performance of a novel fast track reconstruction algorithm, and the first hardware demonstration of the scheme with muon testbeam data taken at the CERN Gamma Irradiation Facility are discussed.

physics.ins-det↗

arXiv2016

Photoproduction ofeta-pi pairs off nucleons and deuterons

Quasi-free photoproduction of $\pi\eta$-pairs has been investigated from threshold up to incident photon energies of 1.4 GeV, respectively up to photon-nucleon invariant masses up to 1.9 GeV. Total cross sections, angular distributions, invariant-mass distributions of the $\pi\eta$ and meson-nucleon pairs, and beam-helicity asymmetries have been measured for the reactions $\gamma p\rightarrow p\pi^0\eta$, $\gamma n\rightarrow n\pi^0\eta$, $\gamma p\rightarrow n\pi^+\eta$, and $\gamma n\rightarrow p\pi^-\eta$ from nucleons bound inside the deuteron. For the $\gamma p$ initial state data for free protons have also been analyzed. Finally, the total cross sections for quasi-free production of $\pi^0\eta$ pairs from nucleons bound in $^3$He nuclei have been investigated in view of final state interaction (FSI) effects. The experiments were performed at the tagged photon beam facility of the Mainz MAMI accelerator using an almost $4\pi$ covering electromagnetic calorimeter composed of the Crystal Ball and TAPS detectors. The shapes of all differential cross section data and the asymmetries are very similar for protons and neutrons and agree with the conjecture that the reactions are dominated by the sequential $\Delta^{\star}3/2^-\rightarrow\eta\Delta(1232)\rightarrow\pi\eta N$ decay chain, mainly with $\Delta(1700)3/2^-$ and $\Delta(1940)3/2^-$. The ratios of the magnitude of the total cross sections also agree with this assumption. However, the absolute magnitudes of the cross sections are reduced by FSI effects with respect to free proton data.

nucl-ex↗

arXiv2013

Single-hole tunneling through a two-dimensional hole gas in intrinsic silicon

In this letter we report single-hole tunneling through a quantum dot in a two-dimensional hole gas, situated in a narrow-channel field-effect transistor in intrinsic silicon. Two layers of aluminum gate electrodes are defined on Si/SiO$_2$ using electron-beam lithography. Fabrication and subsequent electrical characterization of different devices yield reproducible results, such as typical MOSFET turn-on and pinch-off characteristics. Additionally, linear transport measurements at 4 K result in regularly spaced Coulomb oscillations, corresponding to single-hole tunneling through individual Coulomb islands. These Coulomb peaks are visible over a broad range in gate voltage, indicating very stable device operation. Energy spectroscopy measurements show closed Coulomb diamonds with single-hole charging energies of 5--10 meV, and lines of increased conductance as a result of resonant tunneling through additional available hole states.

cond-mat.mes-hall↗

arXiv2012

DEPFET active pixel detectors for a future linear $e^+e^-$ collider

The DEPFET collaboration develops highly granular, ultra-transparent active pixel detectors for high-performance vertex reconstruction at future collider experiments. The characterization of detector prototypes has proven that the key principle, the integration of a first amplification stage in a detector-grade sensor material, can provide a comfortable signal to noise ratio of over 40 for a sensor thickness of 50-75 $\mathrm{\mathbf{\mu m}}$. ASICs have been designed and produced to operate a DEPFET pixel detector with the required read-out speed. A complete detector concept is being developed, including solutions for mechanical support, cooling and services. In this paper the status of DEPFET R & D project is reviewed in the light of the requirements of the vertex detector at a future linear $\mathbf{e^+ e^-}$ collider.

physics.ins-det↗

arXiv2008

Coherent Activation of Zero-Field Fiske Modes in Arrays of Josephson Junctions

Series arrays of Josephson junctions show evidence of a mode in which all the junctions oscillate in synchronism on voltage resonances appearing, in zero external magnetic field, at multiples of the fundamental Fiske step spacing. The measurements show that the current amplitude of the resonances increases linearly as their voltages are summed. Investigation of the nature of the coherent mode by magnetic field responses of arrays and isolated juctions reveals that the oscillations take place in a parameter plane region where dc magnetic fields only activate boundary current and flux-quanta dynamics can take place.

cond-mat.supr-con↗

arXiv2008

Optomechanical Stochastic Resonance in a Macroscopic Torsion Oscillator

Linear mechanical oscillators have been applied to measure very small forces, mostly with the help of noise suppression. In contrast, adding noise to non-linear oscillators can improve the measurement conditions. Here, this effect of stochastic resonance is demonstrated in a macroscopic torsion oscillator, for an optomechanical non-linear potential. The signal output is enhanced for a sub-threshold electronic signal. This non-linear oscillator serves as a model system for the enhancement of signal-to-noise ratio in high precision optomechanical experiments.

physics.optics↗

arXiv2007

Sub-Kelvin Cooling of a Macroscopic Oscillator and femto-Newton Force Measurement

Measuring very small forces, particularly those of a gravitational nature, has always been of great interest, as fundamental tests of our understanding of the physical laws. Ultra-long period mechanical oscillators, typically used in such measurements, will have kT/2 of thermal energy associated with each degree of freedom, owing to the equal-partition of energy. Moreover, additional seismic fluctuations in the low frequency band can raise this equivalent temperature significantly to 10^5 K. Recently, various methods using opto-mechanical forces have been reported to decrease this thermal energy for MHz, micro-cantilever oscillators, effectively cooling them. Here we show the direct, dynamical cooling of a gram-size, macroscopic oscillator to 300 mK in equivalent temperature - noise reduction by a factor of 10^6. By precisely measuring the torsional oscillator's position, we dynamically provide an external 'viscous' damping force. Such an added, dissipative force is essentially free of noise, resulting in rapid cooling of the oscillator. Additionally, we observe the time-dependent cooling process, at various cooling force parameters. This parameter dependence agrees well with a simple physical model which we provide. We further show that the device is sensitive to forces as small as <100 fN - a force only a few percent of that typically exerted by a single biological molecule or that observed in a typical gravity experiment. We also demonstrate the dynamic control of the oscillator's natural frequency, over a span of nearly two decades. The method may find important applications in precision measurements of very weak forces.

physics.ins-det↗

arXiv2007

Observation of opto-mechanical multistability in a high Q torsion balance oscillator

We observe the opto-mechanical multistability of a macroscopic torsion balance oscillator. The torsion oscillator forms the moving mirror of a hemi-spherical laser light cavity. When a laser beam is coupled into this cavity, the radiation pressure force of the intra-cavity beam adds to the torsion wire's restoring force, forming an opto-mechanical potential. In the absence of optical damping, up to 23 stable trapping regions were observed due to local light potential minima over a range of 4 micrometer oscillator displacement. Each of these trapping positions exhibits optical spring properties. Hysteresis behavior between neighboring trapping positions is also observed. We discuss the prospect of observing opto-mechanical stochastic resonance, aiming at enhancing the signal-to-noise ratio (SNR) in gravity experiments.

physics.optics↗

arXiv2007

On critical normal sections for two-dimensional immersions in R^{n+2}

We study orthonormal normal sections of two-dimensional immersions in $\mathbb R^{n+2},$ $n\ge 2$, at which these sections are critical for a functional of total torsion. In particular, we establish upper bounds for the torsion coefficients in the case of non-flat normal bundles. With these notes we continue a foregoing paper on surfaces in $\mathbb R^4.$

math.DG↗