arXiv subjects

F. Moreno

Publications and source records attributed to F. Moreno.

At least 19 recordsLinked to original sources

arXiv2026

Dust colour, phase behaviour, and Monte Carlo modelling of interstellar comet 3I/ATLAS from 4 au pre- to 4 au post-perihelion

We report multi-band photometric imaging observations and Monte Carlo dust tail modelling of the interstellar comet 3I/ATLAS covering a wide range of heliocentric distances, from about 4 au pre-perihelion to 4 au post-perihelion. The extensive imaging data set allowed us to constrain the dust physical properties, ejection speeds, and production rates as a function of heliocentric distance. The post-perihelion observations, obtained at high cadence in multiple photometric bands (SDSS g, r, i, and luminance filters) and spanning phase angles between approximately 0.7 deg and 30 deg, enabled us to determine the dust color and phase function. The resulting phase curve exhibits a prominent backscattering enhancement, distinct from those derived for Solar System comets, with an opposition surge of 0.1--0.4 mag, a width of 1--3 deg, and a linear phase coefficient of 0.02-0.04 mag/deg, consistent with independent pre-perihelion estimates. A possible interpretation of the imaging data, together with independent photometric measurements, indicates a dust size distribution characterized by a power-law index of -3.5, with minimum and maximum particle radii of rmin = 10 micrometer and rmax in the interval 1-10 cm. The reported water production rate correlates well with the dust production rate post-perihelion, but fails to do so pre-perihelion, an effect possibly linked to the high CO2/H2O ratio measured before perihelion. The derived maximum dust-loss rate at perihelion is (0.5-1.8)E4 kg/s.

astro-ph.EP↗

arXiv2022

Demonstration of latency-aware 5G network slicing on optical metro networks

The H2020 METRO-HAUL European project has architected a latency-aware, cost-effective, agile, and programmable optical metro network. This includes the design of semidisaggregated metro nodes with compute and storage capabilities, which interface effectively with both 5G access and multi-Tbit/s elastic optical networks in the core. In this paper, we report the automated deployment of 5G services, in particular, a public safety video surveillance use case employing low-latency object detection and tracking using on-camera and on-the-edge analytics. The demonstration features flexible deployment of network slice instances, implemented in terms of European Telecommunications Standards Institute (ETSI) network function virtualization network services. We summarize the key findings in a detailed analysis of end-to-end quality of service, service setup time, and soft-failure detection time. The results show that the round-trip time over an 80 km link is under 800s and the service deployment time is under 180s.

cs.NI↗

arXiv2021

Retrieving Dust Grain Sizes from Photopolarimetry: An Experimental Approach

We present the experimental phase function, degree of linear polarization (DLP), and linear depolarization (deltaL) curves of a set of forsterite samples representative of low-absorbing cosmic dust particles. The samples are prepared using state-of-the-art size-segregating techniques to obtain narrow size distributions spanning a broad range of the scattering size parameter domain. We conclude that the behavior of the phase function at the side- and back-scattering regions provides information on the size regime, the position and magnitude of the maximum of the DLP curve are strongly dependent on particle size, the negative polarization branch is mainly produced by particles with size parameters in the approx. 6 to 20 range, and the deltaL is strongly dependent on particle size at all measured phase angles except for the exact backward direction. From a direct comparison of the experimental data with computations for spherical particles, it becomes clear that the use of the spherical model for simulating the phase function and DLP curves of irregular dust produces dramatic errors in the retrieved composition and size of the scattering particles: The experimental phase functions are reproduced by assuming unrealistically high values of the imaginary part of the refractive index. The spherical model does not reproduce the bell-shaped DLP curve of dust particles with sizes in the resonance and/or geometric optics size domain. Thus, the use of the Mie model for analyzing polarimetric observations might prevent locating dust particles with sizes of the order of or larger than the wavelength of the incident light.

astro-ph.EP↗

arXiv2021

Observational constraints to the dynamics of dust particles in the coma of comet 67P/Churyumov-Gerasimenko

In this work we aim to characterise the dust motion in the inner coma of comet 67P/Churyumov- Gerasimenko to provide constraints for theoretical 3D coma models. The OSIRIS camera onboard the Rosetta mission was able for the first time to acquire images of single dust particles from inside the cometary coma, very close to the nucleus. We analyse a large number of particles, performing a significant statistic of their behaviour during the post perihelion period, when the spacecraft covered distances from the nucleus ranging between 80 and 400 km. We describe the particle trajectories, investigating their orientation and finding highly radial motion with respect to the nucleus. Then, from the particle brightness profiles, we derive a particle rotational frequency of v < 3.6 Hz, revealing that they are slow rotators and do not undergo fragmentation. We use scattering models to compare the observed spectral radiance of the particles with the simulated ones in order to estimate their size, finding values that range from millimetres up to centimetres. The statistics performed in this paper provide useful parameters to constrain the cometary coma dynamical models.

astro-ph.EP↗

arXiv2021

Activity of the Jupiter co-orbital comet P/2019~LD$_{2}$ (ATLAS) observed with OSIRIS at the 10.4 m GTC

Jupiter co-orbital comets have orbits that are not long-term stable. They may experience flybys with Jupiter close enough to trigger tidal disruptions like the one suffered by comet Shoemaker-Levy 9. Our aim was to study the activity and dynamical evolution of the Jupiter co-orbital comet P/2019 LD2 (ATLAS). We present results of an observational study carried out with the 10.4m Gran Telescopio Canarias (GTC) that includes image analyses using a MC dust tail fitting code to characterize its activity, and spectroscopic studies to search for gas emission. We also present N-body simulations to explore its orbital evolution. Images of LD2 obtained on 2020 May 16 show a conspicuous coma and tail. The spectrum does not exhibit any evidence of CN, C2, or C3 emission. The comet brightness in a 2.6 arcsec aperture is r'=19.34+/-0.02 mag, with colors (g'-r')=0.78+/-0.03, (r'-i')=0.31+/-0.03, and (i'-z')=0.26+/-0.03. The temporal dependence of the dust loss rate can be parameterized by a Gaussian having a FWHM of 350 days and a maximum of 60 kg/s reached on 2019 August 15. The total dust loss rate is 1.9e09 kg. LD2 is now following what looks like a short arc of a quasi-satellite cycle that started in 2017 and will end in 2028. On 2063 January 23, it will experience a very close encounter with Jupiter at 0.016 au. Its probability of escaping the solar system during the next 0.5 Myr is 0.53+/-0.03. LD2 is a kilometer-sized object, in the size range of the Jupiter-family comets, with a typical comet-like activity likely linked to sublimation of crystalline water ice and clathrates. Its origin is still an open question. We report a probability of LD2 having been captured from interstellar space during the last 0.5 Myr of 0.49+/-0.02, 0.67+/-0.06 during the last 1 Myr, 0.83+/-0.06 over 3 Myr, and 0.91+/-0.09 during the last 5 Myr.

astro-ph.EP↗

arXiv2020

Visible and near-infrared observations of interstellar comet 2I/Borisov with the 10.4-m GTC and the 3.6-m TNG telescopes

In this work, we present the results of an observational study of 2I/Borisov carried out with the 10.4-m Gran Telescopio Canarias (GTC) and the 3.6-m Telescopio Nazionale Galileo (TNG), both telescopes located at the Roque de Los Muchachos Observatory, in the island of La Palma (Spain). The study includes images in the visible and near-infrared, as well as visible spectra in the 3600 - 9200 A wavelength range. N-body simulations were also performed to explore its orbital evolution and Galactic kinematic context. The comet's dust continuum and near-infrared colours are compatible with those observed for Solar system comets. From its visible spectrum on the nights of 2019, September 24 and 26 we measured CN gas production rates Q(CN) = (2.3 +- 0.4) x 10^{24} mol/s and Q(CN) = (9.5 +- 0.2) x 10^{24} mol/s, respectively, in agreement with measurements reported by other authors on similar nights. We also obtained an upper limit for the C2 production rate of Q(C2) < (4.5 +- 0.1) x 10^{24} mol/s. Dust modelling results indicate a moderate dust production rate of about 50 kg/s at heliocentric distance r_h=2.6 au, with a differential power-law dust size distribution of index -3.4, within the range reported for many comet comae. Our simulations show that the Galactic velocity of 2I/Borisov matches well that of known stars in the solar neighbourhood and also those of more distant regions of the Galactic disc.

astro-ph.EP↗

arXiv2019

Dust Properties of Double-Tailed Active Asteroid (6478) Gault

Asteroid (6478) Gault was discovered to exhibit a comet-like tail in observations from December 2018, becoming a new member of the so-called active asteroid population in the main asteroid belt. The aims are to investigate the grain properties of the dust ejected from asteroid (6478) Gault and to give insight into the activity mechanism(s). We use a Monte Carlo dust tail brightness code to retrieve the dates of dust ejection, the physical properties of the grains, and the total dust mass losses during each event. The code takes into account the brightness contribution of the asteroid itself. The model is applied to a large data set of images spanning the period from January 11, 2019 to March 13, 2019. In addition, both short- and long-term photometric measurements of the asteroid have been carried out. It is shown that, to date, asteroid (6478) Gault has experienced two episodes of impulsive dust ejection, that took place around 2018 November 5 and 2019 January 2, releasing at least 1.4$\times$10$^7$ kg and 1.6 $\times$10$^6$ kg of dust, respectively, at escape speeds. The size distribution, consisting of particles in the 1 $μ$m to 1 cm radius range, follows a broken power-law with bending points near 15 $μ$m and 870 $μ$m. On the other hand, the photometric series indicate a nearly constant magnitude over several 5--7.3 h periods, a possible effect of the masking of a rotational lightcurve by the dust. The dust particles forming Gault's tails were released from the asteroid at escape speeds, but the specific ejection mechanism is unclear until photometry of the dust-free asteroid are conducted, in order to assess whether this was related to rotational disruption or to other possible causes.

astro-ph.EP↗

arXiv2019

Synthesis of the Morphological Description of Cometary Dust at Comet 67P

Before Rosetta, the space missions Giotto and Stardust shaped our view on cometary dust, supported by plentiful data from Earth based observations and interplanetary dust particles collected in the Earth's atmosphere. The Rosetta mission at comet 67P/Churyumov-Gerasimenko was equipped with a multitude of instruments designed to study cometary dust. While an abundant amount of data was presented in several individual papers, many focused on a dedicated measurement or topic. Different instruments, methods, and data sources provide different measurement parameters and potentially introduce different biases. This can be an advantage if the complementary aspect of such a complex data set can be exploited. However, it also poses a challenge in the comparison of results in the first place. The aim of this work therefore is to summarise dust results from Rosetta and before. We establish a simple classification as a common framework for inter-comparison. This classification is based on a dust particle's structure, porosity, and strength as well as its size. Depending on the instrumentation, these are not direct measurement parameters but we chose them as they were the most reliable to derive our model. The proposed classification already proved helpful in the Rosetta dust community and we propose to take it into consideration also beyond. In this manner we hope to better identify synergies between different instruments and methods in the future.

astro-ph.EP↗

arXiv2018

Optical inspection of manufactured nanohole arrays to bridge the lab-industry gap

Metallic nanohole arrays have shown their potential as sensing tools. Important research supported by sophisticated laboratory experiments have been recently carried out, that may help to develop practical devices to be implemented in the real life. To get this goal, the gap between industry and technology at the nanoscale level must be overcome. One of the major drawbacks is the quality inspection of the manufactured nanostructured surfaces to ensure a reliable sensing. In this paper we introduce an optical method, based on the Extraordinary Optical Transmission phenomenon, for an inspection of such surfaces at industrial level. Unlike usual techniques like SEM, our method gives at the same time, a quick map of the surface homogeneity together with its local plasmonic performance. Our results show that this method is reproducible and reliable as to give a seal of identification and quality guarantee of the manufactured surface as basic element of a sensing device.

physics.app-ph↗

arXiv2017

Disrupted asteroid P/2016 G1. II. Follow-up observations from the Hubble Space Telescope

After the early observations of the disrupted asteroid P/2016 G1 with the 10.4m Gran Telescopio Canarias (GTC), and the modeling of the dust ejecta, we have performed a follow-up observational campaign of this object using the Hubble Space Telescope (HST) during two epochs (June 28 and July 11, 2016). The analysis of these HST images with the same model inputs obtained from the GTC images revealed a good consistency with the predicted evolution from the GTC images, so that the model is applicable to the whole observational period from late April to early July 2016. This result confirms that the resulting dust ejecta was caused by a relatively short-duration event with onset about 350 days before perihelion, and spanning about 30 days (HWHM). For a size distribution of particles with a geometric albedo of 0.15, having radii limits of 1 $μ$m and 1 cm, and following a power-law with index --3.0, the total dust mass ejected is $\sim$2$\times$10$^7$ kg. As was the case with the GTC observations, no condensations in the images that could be attributed to a nucleus or fragments released after the disruption event were found. However, the higher limiting magnitude reachable with the HST images in comparison with those from GTC allowed us to impose a more stringent upper limit to the observed fragments of $\sim$30 m.

astro-ph.EP↗

arXiv2017

The Castalia Mission to Main Belt Comet 133P/Elst-Pizarro

We describe Castalia, a proposed mission to rendezvous with a Main Belt Comet (MBC), 133P/Elst-Pizarro. MBCs are a recently discovered population of apparently icy bodies within the main asteroid belt between Mars and Jupiter, which may represent the remnants of the population which supplied the early Earth with water. Castalia will perform the first exploration of this population by characterising 133P in detail, solving the puzzle of the MBC's activity, and making the first in situ measurements of water in the asteroid belt. In many ways a successor to ESA's highly successful Rosetta mission, Castalia will allow direct comparison between very different classes of comet, including measuring critical isotope ratios, plasma and dust properties. It will also feature the first radar system to visit a minor body, mapping the ice in the interior. Castalia was proposed, in slightly different versions, to the ESA M4 and M5 calls within the Cosmic Vision programme. We describe the science motivation for the mission, the measurements required to achieve the scientific goals, and the proposed instrument payload and spacecraft to achieve these.

astro-ph.EP↗

arXiv2017

Experimental phase functions of mm-sized cosmic dust grains

We present experimental phase functions of three types of millimeter-sized dust grains consisting of enstatite, quartz and volcanic material from Mount Etna, respectively. The three grains present similar sizes but different absorbing properties. The measurements are performed at 527 nm covering the scattering angle range from 3 to 170 degrees. The measured phase functions show two well defined regions i) soft forward peaks and ii) a continuous increase with the scattering angle at side- and back-scattering regions. This behavior at side- and back-scattering regions are in agreement with the observed phase functions for the Fomalhaut and HR 4796A dust rings. Further computations and measurements (including polarization) for millimeter sized-grains are needed to draw some conclusions about the fluffy or compact structure of the dust grains.

astro-ph.GA↗

arXiv2017

Modeling of the outburst on July 29th, 2015 observed with OSIRIS cameras in the southern hemisphere of comet 67P/Churyumov-Gerasimenko

Images of the nucleus and the coma (gas and dust) of comet 67P/Churyumov- Gerasimenko have been acquired by the OSIRIS (Optical, Spectroscopic, and Infrared Remote Imaging System) cameras since March 2014 using both the Wide Angle Camera (WAC) and the Narrow Angle Camera (NAC). We use images from the NAC camera to study a bright outburst observed in the southern hemisphere on July 29, 2015. The high spatial resolution of the NAC is needed to localize the source point of the outburst on the surface of the nucleus. The heliocentric distance is 1.25 au and the spacecraft-comet distance is 186 km. Aiming to better understand the physics that led to the outgassing, we used the Direct Simulation Monte Carlo (DSMC) method to study the gas flow close to the nucleus and the dust trajectories. The goal is to understand the mechanisms producing the outburst. We reproduce the opening angle of the outburst in the model and constrain the outgassing ratio between the outburst source and the local region. The outburst is in fact a combination of both gas and dust, in which the active surface is approximately 10 times more active than the average rate found in the surrounding areas. We need a number of dust particles 7.83 $\times$ 10$^{11}$ - 6.90 $\times$ 10$^{15}$ (radius 1.97 - 185 μm), which corresponds to a mass of dust 220 - 21 $\times$ 10$^{3}$kg.

astro-ph.EP↗

arXiv2017

The 67P/Churyumov-Gerasimenko observation campaign in support of the Rosetta mission

We present a summary of the campaign of remote observations that supported the European Space Agency's Rosetta mission. Telescopes across the globe (and in space) followed comet 67P/Churyumov-Gerasimenko from before Rosetta's arrival until nearly the end of mission in September 2016. These provided essential data for mission planning, large-scale context information for the coma and tails beyond the spacecraft, and a way to directly compare 67P with other comets. The observations revealed 67P to be a relatively `well behaved' comet, typical of Jupiter family comets and with activity patterns that repeat from orbit-to-orbit. Comparison between this large collection of telescopic observations and the in situ results from Rosetta will allow us to better understand comet coma chemistry and structure. This work is just beginning as the mission ends -- in this paper we present a summary of the ground-based observations and early results, and point to many questions that will be addressed in future studies.

astro-ph.EP↗

arXiv2016

Sublimation of icy aggregates in the coma of comet 67P/Churyumov-Gerasimenko detected with the OSIRIS cameras onboard Rosetta

Beginning in March 2014, the OSIRIS (Optical, Spectroscopic, and Infrared Remote Imaging System) cameras began capturing images of the nucleus and coma (gas and dust) of comet 67P/Churyumov-Gerasimenko using both the wide angle camera (WAC) and the narrow angle camera (NAC). The many observations taken since July of 2014 have been used to study the morphology, location, and temporal variation of the comet's dust jets. We analyzed the dust monitoring observations shortly after the southern vernal equinox on May 30 and 31, 2015 with the WAC at the heliocentric distance Rh = 1.53 AU, where it is possible to observe that the jet rotates with the nucleus. We found that the decline of brightness as a function of the distance of the jet is much steeper than the background coma, which is a first indication of sublimation. We adapted a model of sublimation of icy aggregates and studied the effect as a function of the physical properties of the aggregates (composition and size). The major finding of this article was that through the sublimation of the aggregates of dirty grains (radius a between 5 microm and 50 microm) we were able to completely reproduce the radial brightness profile of a jet beyond 4 km from the nucleus. To reproduce the data we needed to inject a number of aggregates between 8.5 x $10^{13}$ and 8.5 x $10^{10}$ for a = 5 microm and 50 microm respectively, or an initial mass of $H_2O$ ice around 22kg.

astro-ph.EP↗

arXiv2016

Dust loss from activated asteroid P/2015 X6

We present observations and dust tail models of activated asteroid P/2015 X6 from deep imaging data acquired at the 10.4m Gran Telescopio Canarias (GTC) from mid-December 2015 to late January 2016. The results of the modeling indicate that the asteroid has undergone a sustained dust loss over a two-month or longer period. The dust parameters, derived from multidimensional fits of the available images, are compatible with either ice sublimation or rotational instability processes. An impulsive event, as it could be associated to an impact with another body, is less likely. A power-law distribution of particles, with minimum and maximum radius of 1 $μ$m and 1 cm, and power index of --3.3 is found to be consistent with the observations. Depending on the ejection velocity model adopted, the particle velocities are found in the 0.3 to 10 m s$^{-1}$ range. The activation time was between 18-26 days before discovery. The total ejected mass from that time to the most recent observation is in the range 5-9$\times$10$^6$ kg. No dust features giving indication of past activity earlier than the activation time have been observed.

astro-ph.EP↗

arXiv2016

The dust environment of comet 67P/Churyumov-Gerasimenko from Rosetta OSIRIS and VLT observations in the 4.5 to 2.9 au heliocentric distance range inbound

The ESA Rosetta spacecraft, currently orbiting around comet 67P, has already provided in situ measurements of the dust grain properties from several instruments, particularly OSIRIS and GIADA. We propose adding value to those measurements by combining them with ground-based observations of the dust tail to monitor the overall, time-dependent dust-production rate and size distribution. To constrain the dust grain properties, we take Rosetta OSIRIS and GIADA results into account, and combine OSIRIS data during the approach phase (from late April to early June 2014) with a large data set of ground-based images that were acquired with the ESO Very Large Telescope (VLT) from February to November 2014. A Monte Carlo dust tail code has been applied to retrieve the dust parameters. Key properties of the grains (density, velocity, and size distribution) were obtained from Rosetta observations: these parameters were used as input of the code to considerably reduce the number of free parameters. In this way, the overall dust mass-loss rate and its dependence on the heliocentric distance could be obtained accurately. The dust parameters derived from the inner coma measurements by OSIRIS and GIADA and from distant imaging using VLT data are consistent, except for the power index of the size-distribution function, which is $α$=--3, instead of $α$=--2, for grains smaller than 1 mm. This is possibly linked to the presence of fluffy aggregates in the coma. The onset of cometary activity occurs at approximately 4.3 au, with a dust production rate of 0.5 kg/s, increasing up to 15 kg/s at 2.9 au. This implies a dust-to-gas mass ratio varying between 3.8 and 6.5 for the best-fit model when combined with water-production rates from the MIRO experiment.

astro-ph.EP↗

arXiv2015

Are fractured cliffs the source of cometary dust jets ? Insights from OSIRIS/Rosetta at 67P

Dust jets, i.e. fuzzy collimated streams of cometary material arising from the nucleus, have been observed in-situ on all comets since the Giotto mission flew by comet 1P/Halley in 1986. Yet their formation mechanism remains unknown. Several solutions have been proposed, from localized physical mechanisms on the surface/sub-surface (see review in Belton (2010)) to purely dynamical processes involving the focusing of gas flows by the local topography (Crifo et al. 2002). While the latter seems to be responsible for the larger features, high resolution imagery has shown that broad streams are composed of many smaller features (a few meters wide) that connect directly to the nucleus surface. We monitored these jets at high resolution and over several months to understand what are the physical processes driving their formation, and how this affects the surface. Using many images of the same areas with different viewing angles, we performed a 3-dimensional reconstruction of collimated jets, and linked them precisely to their sources on the nucleus. Results.We show here observational evidence that the Northern hemisphere jets of comet 67P arise from areas with sharp topographic changes and describe the physical processes involved. We propose a model in which active cliffs are the main source of jet-like features, and therefore the regions eroding the fastest on comets. We suggest that this is a common mechanism taking place on all comets.

astro-ph.EP↗