arXiv subjects

F. Alvarez

Publications and source records attributed to F. Alvarez.

6 recordsLinked to original sources

arXiv2026

GRB 241030A: a bright afterglow challenging forward shock emission

Gamma-Ray Burst GRB 241030A (z = 1.411) exhibited a bright afterglow (similar to GRB 221009A), detected across gamma-ray, X-ray, UV, and optical bands, providing a probe of GRB afterglow physics. We compiled multi-wavelength observations spanning from a minute to a week after the prompt emission, processing the data through a unified photometry pipeline. We analysed the observations both analytically and using Bayesian inference with two independent models. Our models assume that the afterglow emission arises from the strong forward shock of a laterally structured jet, with possible contributions from synchrotron self-Compton (SSC) scatterings. Our models reproduce X-ray to optical data, favouring a jet propagating into a constant-density interstellar medium, with a viewing angle within the jet core. However, both analyses require parameter values that are extreme compared to expectations from standard theory. In particular, our results imply extremely energetic jets despite regular prompt energy, leading to a very inefficient prompt emission. Furthermore, the jets are inefficient at accelerating particles, with low electron and magnetic energy fractions, leading to significant SSC emission. Our analyses indicate that the jets have large opening angles and propagate in high-density media. If the afterglow is indeed powered by radiation emitted behind a strong forward shock, our results place GRB 241030A within a sub-class of GRBs characterised by extreme kinetic energies, large jet opening angles, and very low prompt emission efficiencies, with strong SSC radiation. These predictions are difficult to reconcile with typical expectations from other GRBs. We therefore suggest that the afterglow of GRB 241030A is not solely powered by forward shock emission.

astro-ph.HE↗

arXiv2017

In situ photoemission electron spectroscopy study of nitrogen ion implanted AISI-H13 steel

In this paper we report the effect of hydrogen on the structural properties of AISI-H13 steel nitrogen-implanted samples in low oxygen partial pressure atmosphere. The samples were implanted in a high vacuum chamber by using a broad ion beam source. The H2+/N2+ ion composition of the beam was varied and the surface composition studied in situ by photoemission electron spectroscopy (XPS). The samples were also ex situ analyzed by X-ray diffraction and scanning electron microscopy (SEM), including energy-dispersive spectroscopy measurements. It was found that hydrogen has the effect of modifying the amount of retained nitrogen at the surfaces. This result shows that hydrogen plays a role beyond the well-established effect of oxygen etching in industrial machines where vacuum is relatively less well controlled. Finally, an optimum concentration of 20 to 40% [H2]/[H2+N2] ion beam composition was determined to obtain maximum nitrogen incorporation on the metal surface.

cond-mat.mtrl-sci↗

arXiv2017

Tool steel ion beam assisted nitrocarburization

The nitrocarburization of the AISI-H13 tool steel by ion beam assisted deposition is reported. In this technique, a carbon film is continuously deposited over the sample by the ion beam sputtering of a carbon target while a second ion source is used to bombard the sample with low energy nitrogen ions. The results show that the presence of carbon has an important impact on the crystalline and microstructural properties of the material without modification of the case depth.

cond-mat.mtrl-sci↗

arXiv2014

Effect of bombarding steel with Xe$^+$ ions on the surface nanostructure and on pulsed plasma nitriding process

The modification of steel (AISI 316L and AISI 4140) surface morphology and underlying inter-crystalline grains strain due to Xe$^+$ ion bombardment are reported to affect nitrogen diffusion after a pulsed plasma nitriding process. The ion bombardment induces regular nanometric patterns and increases the roughness of the material surface. The strain induced by the noble gas bombardment is observed in depths which are orders of magnitude larger than the projectiles' stopping distance. The pre-bombarded samples show peculiar microstructures formed in the nitrided layers, modifying the in-depth hardness profile. Unlike the double nitrided layer normally obtained in austenitic stainless steel by pulsed plasma nitriding process, the Xe$^+$ pre-bombardment treatment leads to a single thick compact layer. In nitrided pre-bombarded AISI 4140 steel, the diffusion zone shows long iron nitride needle-shaped precipitates, while in non-pre-bombarded samples finer precipitates are distributed in the material.

cond-mat.mtrl-sci↗

arXiv2012

The Microstructure of Tool Steel after Low Temperature Ion Nitriding

The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400°C and at constant ion beam energy (400 eV) of different doses in a high-vacuum preparation chamber; the ion source was fed with high purity nitrogen gas. The specimens were characterized by X-ray photoelectron spectroscopy (XPS), electron probe microanalysis (EPMA), scanning and transmission electron microscopy (SEM and TEM), and grazing incidence and Bragg-Brentano X-ray diffractometry. In particular, the influence of the nitrogen surface concentration on the development of the nitrogen concentration-depth profile and the possible precipitation of alloying element nitrides are discussed.

cond-mat.mtrl-sci↗

arXiv2012

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning Electron Microscope (SEM) indicates relatively higher nitrogen concentrations (up to 12 at.%) within the diffusion layer while microscopic nitrides are not formed and existing carbides are not dissolved. Moreover, in the diffusion layer, nitrogen is found to be dispersed in the matrix and forming nanosized precipitates. The small coherent precipitates are observed by High-Resolution Transmission Electron Microscopy (HR-TEM) while the presence of nitrogen is confirmed by electron energy loss spectroscopy (EELS). Hardness tests show that the material hardness increases linearly with the nitrogen concentration, reaching up to 14.5 GPa in the surface while the Young Modulus remains essentially unaffected. Indeed, the original steel microstructure is well preserved even in the nitrogen diffusion layer. Nitrogen profiles show a case depth of about ~43 microns after nine hours of nitriding process. These results indicate that pulsed plasma nitriding is highly efficient even at such low temperatures and that at this process temperature it is possible to form thick and hard nitrided layers with satisfactory mechanical properties. This process can be particularly interesting to enhance the surface hardness of tool steels without exposing the workpiece to high temperatures and altering its bulk microstructure.

cond-mat.mtrl-sci↗