arXiv subjects

Eugeniy E. Mikhailov

Publications and source records attributed to Eugeniy E. Mikhailov.

At least 19 recordsLinked to original sources

arXiv2026

Non-invasive 2D spatial measurements of electric fields within a plasma sheath

We introduce an all-optical quantum-enhanced diagnostic for electric fields in low-temperature plasmas. Trace amounts of rubidium vapor, added to an argon plasma, allow us to employ spectrally narrow electric field-sensitive optical resonances via the quantum optical effect of Rydberg electromagnetically induced transparency. This non-invasive technique enables measurements of electric fields in plasma with a 1~V/cm precision and a 1.5~V/cm lower detection limit. By collecting the fluorescence from the illuminated region of interest, we reconstruct a 2D spatial profile of the electric field magnitude with $56~μ$m resolution. As a proof-of-principle demonstration, we measured the changes in the electric field within the plasma sheath surrounding a biased Langmuir probe tip. This method holds significant potential for studying sheath structures in low-temperature plasmas.

physics.plasm-ph↗

arXiv2026

Simultaneous Detection, Demodulation, and Angle-of-Arrival Determination of Communication Signals Using a Dual Ladder Rydberg Receiver

In a typical Rydberg mixer, modulated communication signals are detected using a radio frequency (RF) heterodyne technique. The mixer outputs an intermediate frequency (IF), which must be filtered and mixed down to baseband. In this work, we apply an RF-homodyne technique to demonstrate simultaneous detection and a direct, baseband readout of the in-phase (I) and quadrature (Q) components of standard communication signals using a dual ladder Rydberg receiver. We further show that the inherent polarization sensitivity of this receiver can be used to determine the signal's angle of arrival. We also compare the dual ladder system with a typical Rydberg mixer. The RF-heterodyne-based system's maximum detectable symbol rate is constrained by a signal amplitude which decays with the heterodyne field's detuning from the Rydberg-Rydberg atomic transition used to detect the signal, but the dual ladder design is not subject to this limitation. However, the dual ladder system is more sensitive to low-frequency noise. As a result, its performance is degraded relative to its conventional counterpart when subjected to pink noise. We show that once pink noise effects have been accounted for, both systems behave comparably.

physics.atom-ph↗

arXiv2026

Static dc electric field orientation effects on two-photon Rydberg EIT

We examine the influence of a static dc electric field on Electromagnetically Induced Transparency (EIT) resonances that involve highly excited Rydberg states. Our focus is on how these resonances are altered when the relative orientation between the laser polarization and the external electric field vectors are varied. We experimentally demonstrate characteristic variations in the amplitude of the Stark-split EIT resonances, which can be explained by the selection rules in various geometries. We also present a simplified semi-analytical model that closely resembles the experimental observations. We use these findings to obtain information about the spatially inhomogeneous electric field, produced by a biased wire, using EIT fluorescence measurements that agrees with the expected angular dependencies. These results suggest that simultaneous analysis of frequency shifts and amplitudes of Rydberg EIT resonances may enable vector electrometry of electrostatic fields, necessary for many quantum sensing applications.

physics.atom-ph↗

arXiv2026

Electron Beam Profiling via Rydberg Electromagnetically Induced Transparency in Rubidium Vapor with Crossed Laser beams

We present an all-optical detection approach to determine the position and spatial profile of an electron beam based on quantum properties of alkali metal atoms. To measure the electric field, produced by an electron beam, we excite thermal rubidium atoms to a highly excited Rydberg state via a two-photon ladder transition and detect Stark shifts of Rydberg states by monitoring frequencies of the corresponding electromagnetically induced transparency (EIT) transmission peaks. We addressed several technical challenges in this approach. First, we use crossed laser beams to obtain spatial information about the electron beam position and geometry. Second, by pulsing the electron beam and using phase-sensitive optical detection, we separate the true electron beam electric signature from the parasitic electric fields due to photoelectric charges on the windows. Finally, we use a principle component analysis to further improve signal quality. We test this method to detect the current and to reconstruct a 2D profile of a 20 keV electron beam with currents ranging from 25 - 100 uA. While this technique provides less spatial resolution than fluorescence-based measurements, thanks to their speed and limited optical access requirements it can be useful for real-time non-invasive diagnostics of charged particle beams at accelerator facilities.

physics.atom-ph↗

arXiv2025

Light shift suppression in a CPT magnetometer using linear polarization and double frequency interrogation

We demonstrate a suppression of the light shift in a Coherent-Population-Trapping (CPT) atomic magnetometer by using linearly polarized light and a differential measurement between magnetic resonances. The radio frequency that creates the optical sidebands for CPT quickly switches between two magnetic sensitive transitions and the magnetic field is extrapolated from the difference of the center frequencies of the magnetic resonances. Light shifts and common drifts like collisional shifts can be suppressed through careful choice of measured resonances and we show the light shift reduction by more than a factor of 20 compared to excitation with circular polarized light. Various limitations to the method are discussed.

physics.atom-ph↗

arXiv2024

Two-dimensional imaging of electromagnetic fields via light sheet fluorescence imaging with Rydberg atoms

The ability to image electromagnetic fields holds key scientific and industrial applications, including electromagnetic compatibility, diagnostics of high-frequency devices, and experimental scientific work involving field interactions. Generally electric and magnetic field measurements require conductive elements which significantly distort the field. However, electromagnetic fields can be measured without altering the field via the shift they induce on Rydberg states of alkali atoms in atomic vapor, which are highly sensitive to electric fields. Previous field measurements using Rydberg atoms utilized electromagnetically induced transparency to read out the shift on the states induced by the fields, but did not provide spatial resolution. In this work, we demonstrate that electromagnetically induced transparency can be spatially resolved by imaging the fluorescence of the atoms. We demonstrate that this can be used to image $\sim$ V/cm scale electric fields in the DC-GHz range and $\sim$ mT scale static magnetic fields, with minimal distortion to the fields. We also demonstrate the ability to image $\sim$ 5 mV/cm scale fields for resonant microwave radiation and measure standing waves generated by the partial reflection of the vapor cell walls in this regime. With additional processing techniques like lock-in detection, we predict that our sensitivities could reach down to nV/cm levels. We perform this field imaging with a spatial resolution of 160 $μ$m, limited by our imaging system, and estimate the fundamental resolution limitation to be 5 $μ$m.

physics.atom-ph↗

arXiv2024

Electron Beam Characterization via Quantum Coherent Optical Magnetometry

We present a quantum optics-based detection method for determining the position and current of an electron beam. As electrons pass through a dilute vapor of rubidium atoms, their magnetic field perturb the atomic spin's quantum state and causes polarization rotation of a laser resonant with an optical transition of the atoms. By measuring the polarization rotation angle across the laser beam, we recreate a 2D projection of the magnetic field and use it to determine the e-beam position, size and total current. We tested this method for an e-beam with currents ranging from 30 to 110 μA. Our approach is insensitive to electron kinetic energy, and we confirmed that experimentally between 10 to 20 keV. This technique offers a unique platform for non-invasive characterization of charged particle beams used in accelerators for particle and nuclear physics research.

quant-ph↗

arXiv2023

Quantum fluctuations spatial mode profiler

The spatial mode is an essential component of an electromagnetic field description, yet it is challenging to characterize it for optical fields with low average photon number, such as in a squeezed vacuum. We present a method for reconstruction of the spatial modes of such fields based on the homodyne measurements of their quadrature noise variance performed with a set of structured masks. We show theoretically that under certain conditions we can recover individual spatial mode distributions by using the weighted sum of the basis masks, where weights are determined using measured variance values and phases. We apply this approach to analyze the spatial structure of a squeezed vacuum field with various amount of excess thermal noise generated in Rb vapor.

quant-ph↗

arXiv2022

Weak Thermal State Quadrature-Noise Shadow Imaging

In this work, we theoretically and experimentally demonstrate the possibility to create an image of an opaque object using a few-photon thermal optical field. We utilize the Quadrature-Noise Shadow Imaging (QSI) technique that detects the changes in the quadrature-noise statistics of the probe beam after its interaction with an object. We show that such thermal QSI scheme has an advantage over the classical differential imaging when the effect of dark counts is considered. At the same time, the easy availability of thermal sources for any wavelength makes the method practical for broad range of applications, not accessible with, e.g. quantum squeezed light. As a proof of principle, we implement this scheme by two different light sources: a pseudo-thermal beam generated by rotating ground glass (RGG) method and a thermal beam generated by Four-Wave Mixing (FWM) method. The RGG method shows simplicity and robustness of QSI scheme while the FWM method validates theoretical signal-to-noise ratio predictions. Finally, we demonstrate low-light imaging abilities with QSI by imaging a biological specimen on a CCD camera, detecting as low as 0.03 photons on average per pixel per 1.7 microseconds exposure.

quant-ph↗

arXiv2022

Wave-Front Reconstruction via Single-Pixel Homodyne Imaging

We combine single-pixel imaging and homodyne detection to perform full object recovery (phase and amplitude). Our method does not require any prior information about the object or the illuminating fields. As a demonstration, we reconstruct the optical properties of several semi-transparent objects and find that the reconstructed complex transmission has a phase precision of 0.02 radians and a relative amplitude precision of 0.01.

physics.optics↗

arXiv2021

Low-Light Shadow Imaging using Quantum-Noise Detection with a Camera

We experimentally demonstrate an imaging technique based on quantum noise modification after interaction with an opaque object. By using a homodyne-like detection scheme, we eliminate the detrimental effect of the camera's dark noise, making this approach particularly attractive for imaging scenarios that require weak illumination. Here, we reconstruct the image of an object illuminated with a squeezed vacuum using a total of 800 photons, utilizing less than one photon per frame on average.

quant-ph↗

arXiv2020

Quantum-Limited Squeezed Light Detection with a Camera

We present a technique for squeezed light detection based on direct imaging of the displaced-squeezed-vacuum state using a CCD camera. We show that the squeezing parameter can be accurately estimated using only the first two moments of the recorded pixel-to-pixel photon fluctuation statistics, with accuracy that rivals that of the standard squeezing detection methods such as a balanced homodyne detection. Finally, we numerically simulate the camera operation, reproducing the noisy experimental results with low signal samplings and confirming the theory with high signal samplings.

quant-ph↗

arXiv2019

Dispersion enhanced tunability of laser-frequency response to its cavity-length change

We report on the controllable response of the lasing frequency to the cavity round-trip path change. This is achieved by modifying the dispersion of the intracavity medium in the four-wave mixing regime in Rb. We can either increase the response by at least a factor of $2.7$ or drastically reduce it. The former regime is useful for sensitive measurements tracking the cavity round trip length and the latter regime is useful for precision metrology.

quant-ph↗

arXiv2018

Quantized Nonlinear Gaussian-Beam Dynamics $-$ Tailoring Multimode Squeezed-Light Generation

We present a general, second quantization procedure for multi-transverse-spatial mode Gaussian beam dynamics in nonlinear interactions. Previous treatments have focused on the spectral density and angular distribution of spatial modes. Here we go a layer deeper by investigating the complex transverse-spatial mode in each angular-spatial mode. Furthermore, to implement the theory, we simulate four-wave mixing and parametric down-conversion schemes, showing how one can elucidate and tailor the underlying multi-transverse-spatial mode structure along with it's quantum properties.

quant-ph↗

arXiv2018

An analytically simple and computationally efficient Gaussian beam mode-decomposition approach to classical diffraction theory

We present a method of Gaussian-beam-mode decomposition to calculate classical diffraction of optical beams by apertures. This method offers a entirely different approach to examine the classic problem. Although our method is based on a very straightforward setup, it is surprisingly effective. We validate our method by comparing its results with those of Kirchhoff's full diffraction formula. Not only does our method have a simple and organized analytical framework, it also offers significant computational advantage.

physics.optics↗

arXiv2018

Transit Ramsey EIT resonances in a Rb vacuum cell

We investigate a dual-channel arrangement for electromagnetically-induced transparency in a vacuum Rb vapor cell, and report the observation of a transient spectral feature due to the atoms traversing both beams while preserving their ground-state spin coherence. Despite a relatively small fraction of atoms participating in this process, their contribution to the overall lineshape is not negligible. By adjusting the path difference between the two optical beams, the differential intensity measurement can produce an error signal for the microwave frequency stabilization as strong as a single-channel measurement, but it provides a much higher signal-to-noise ratio due to the cancellation of intensity noise, dominating the signal channel detection.

physics.atom-ph↗

arXiv2017

Characterization of frequency stability in EIT-based atomic clocks using a differential detection scheme

We investigate a recently proposed scheme for differential detection of the magneto-optical rotation effect and its application to electromagnetically induced transparency (EIT) atomic clocks. This scheme utilizes a linearly polarized bichromatic laser field that is EIT-resonant with alkali atoms. The results of our study reveal that the suppression of the laser noise can substantially improve the signal-to-noise ratio in EIT atomic clocks. Our preliminary results demonstrate an order of magnitude improvement in clock stability under some conditions when incorporating the differential detection scheme

physics.ins-det↗

arXiv2017

Multi-pass configuration for Improved Squeezed Vacuum Generation in Hot Rb Vapor

We study a squeezed vacuum field generated in hot Rb vapor via the polarization self-rotation effect. Our previous experiments showed that the amount of observed squeezing may be limited by the contamination of the squeezed vacuum output with higher-order spatial modes, also generated inside the cell. Here, we demonstrate that the squeezing can be improved by making the light interact several times with a less dense atomic ensemble. With optimization of some parameters we can achieve up to -2.6 dB of squeezing in the multi-pass case, which is 0.6 dB improvement compared to the single-pass experimental configuration. Our results show that other than the optical depth of the medium, the spatial mode structure and cell configuration also affect the squeezing level.

physics.atom-ph↗