arXiv Science⌕ Search

arXiv subjects

Erik Burman

Publications and source records attributed to Erik Burman.

At least 109 records · Page 6Linked to original sources

A Simple Finite Element Method for Elliptic Bulk Problems with Embedded Surfaces

In this paper we develop a simple finite element method for simulation of embedded layers of high permeability in a matrix of lower permeability using a basic model of Darcy flow in embedded cracks. The cracks are allowed to cut through the mesh in arbitrary fashion and we take the flow in the crack into account by superposition. The fact that we use continuous elements leads to suboptimal convergence due to the loss of regularity across the crack. We therefore refine the mesh in the vicinity of the crack in order to recover optimal order convergence in terms of the global mesh parameter. The proper degree of refinement is determined based on an a priori error estimate and can thus be performed before the actual finite element computation is started. Numerical examples showing this effect and confirming the theoretical results are provided. The approach is easy to implement and beneficial for rapid assessment of the effect of crack orientation and may for example be used in an optimization loop.

math.NA↗

Fully discrete finite element data assimilation method for the heat equation

We consider a finite element discretization for the reconstruction of the final state of the heat equation, when the initial data is unknown, but additional data is given in a sub domain in the space time. For the discretization in space we consider standard continuous affine finite element approximation, and the time derivative is discretized using a backward differentiation. We regularize the discrete system by adding a penalty of the $H^1$-semi-norm of the initial data, scaled with the mesh-parameter. The analysis of the method uses techniques developed in E. Burman and L. Oksanen, Data assimilation for the heat equation using stabilized finite element methods, arXiv, 2016, combining discrete stability of the numerical method with sharp Carleman estimates for the physical problem, to derive optimal error estimates for the approximate solution. For the natural space time energy norm, away from $t=0$, the convergence is the same as for the classical problem with known initial data, but contrary to the classical case, we do not obtain faster convergence for the $L^2$-norm at the final time.

math.NA↗

A simple approach for finite element simulation of reinforced plates

We present a new approach for adding Bernoulli beam reinforcements to Kirchhoff plates. The plate is discretised using a continuous/discontinuous finite element method based on standard continuous piecewise polynomial finite element spaces. The beams are discretised by the CutFEM technique of letting the basis functions of the plate represent also the beams which are allowed to pass through the plate elements. This allows for a fast and easy way of assessing where the plate should be supported, for instance, in an optimization loop.

math.NA↗

Software frameworks for integral equations in electromagnetic scattering based on Calderón identities

In recent years there have been tremendous advances in the theoretical understanding of boundary integral equations for Maxwell problems. In particular, stable dual pairing of discretisation spaces have been developed that allow robust formulations of the preconditioned electric field, magnetic field and combined field integral equations. Within the BEM++ boundary element library we have developed implementations of these frameworks that allow an intuitive formulation of the typical Maxwell boundary integral formulations within a few lines of code. The basis of these developments is an efficient and robust implementations of Calderón identities together with a product algebra that hides and automates most technicalities involved in assembling Galerkin boundary integral equations. In this paper we demonstrate this framework and use it to derive very simple and robust software formulations of the standard preconditioned electric field, magnetic field and regularised combined field integral equations for Maxwell.

math.NA↗

Deriving robust unfitted finite element methods from augmented Lagrangian formulations

In this paper we will discuss different coupling methods {suitable for use in} the framework of the recently introduced CutFEM paradigm, cf. Burman, Erik; Claus, Susanne; Hansbo, Peter; Larson, Mats G.; Massing, André . CutFEM: discretizing geometry and partial differential equations. Internat. J. Numer. Methods Engrg. 104 (2015), no. 7, 472-501. In particular we will consider mortaring using Lagrange multipliers on the one hand and Nitsche's method on the other. For simplicity we will first discuss these method in the setting of uncut meshes, and end with some comments on the extension to CutFEM. We will, for comparison, discuss some different types of problems such as high contrast problems and problems with stiff coupling or adhesive contact. We will review some of the existing methods for these problems and propose some alternative methods resulting from crossovers from the Lagrange multiplier framework to Nitsche's method and vice versa.

math.NA↗

Shape Optimization Using the Cut Finite Element Method

We present a cut finite element method for shape optimization in the case of linear elasticity. The elastic domain is defined by a level-set function, and the evolution of the domain is obtained by moving the level-set along a velocity field using a transport equation. The velocity field is the largest decreasing direction of the shape derivative that satisfies a certain regularity requirement and the computation of the shape derivative is based on a volume formulation. Using the cut finite element method no re--meshing is required when updating the domain and we may also use higher order finite element approximations. To obtain a stable method, stabilization terms are added in the vicinity of the cut elements at the boundary, which provides control of the variation of the solution in the vicinity of the boundary. We implement and illustrate the performance of the method in the two--dimensional case, considering both triangular and quadrilateral meshes as well as finite element spaces of different order.

math.NA↗

Fictitious domain method with boundary value correction using penalty-free Nitsche method

In this paper, we consider a fictitious domain approach based on a Nitsche type method without penalty. To allow for high order approximation using piecewise affine approximation of the geometry we use a boundary value correction technique based on Taylor expansion from the approximate to the physical boundary. To ensure stability of the method a ghost penalty stabilization is considered in the boundary zone. We prove optimal error estimates in the $H^1$-norm and estimates suboptimal by $\mathcal{O}(h^{\frac12})$ in the $L^2$-norm. The suboptimality is due to the lack of adjoint consistency of our formulation. Numerical results are provided to corroborate the theoretical study.

math.NA↗

Cut Finite Element Methods for Partial Differential Equations on Embedded Manifolds of Arbitrary Codimensions

We develop a theoretical framework for the analysis of stabilized cut finite element methods for the Laplace-Beltrami operator on a manifold embedded in $\mathbb{R}^d$ of arbitrary codimension. The method is based on using continuous piecewise polynomials on a background mesh in the embedding space for approximation together with a stabilizing form that ensures that the resulting problem is stable. The discrete manifold is represented using a triangulation which does not match the background mesh and does not need to be shape-regular, which includes level set descriptions of codimension one manifolds and the non-matching embedding of independently triangulated manifolds as special cases. We identify abstract key assumptions on the stabilizing form which allow us to prove a bound on the condition number of the stiffness matrix and optimal order a priori estimates. The key assumptions are verified for three different realizations of the stabilizing form including a novel stabilization approach based on penalizing the surface normal gradient on the background mesh. Finally, we present numerical results illustrating our results for a curve and a surface embedded in $\mathbb{R}^3$.

math.NA↗

Solving ill-posed control problems by stabilized finite element methods: an alternative to Tikhonov regularization

Tikhonov regularization is one of the most commonly used methods of regularization of ill-posed problems. In the setting of finite element solutions of elliptic partial differential control problems, Tikhonov regularization amounts to adding suitably weighted least squares terms of the control variable, or derivatives thereof, to the Lagrangian determining the optimality system. In this note we show that stabilization methods for discretely ill--posed problems developed in the setting of convection--dominated convection--diffusion problems, can be highly suitable for stabilizing optimal control problems, and that Tikhonov regularization will lead to less accurate discrete solutions. We consider data assimilation problems for Poisson's equation as illustration and derive new error estimates both for the the reconstruction of the solution from measured data and reconstruction of the source term from measured data. These estimates include both the effect of discretization error and error in measurements.

math.NA↗

Data assimilation for the heat equation using stabilized finite element methods

We consider data assimilation for the heat equation using a finite element space semi-discretization. The approach is optimization based, but the design of regularization operators and parameters rely on techniques from the theory of stabilized finite elements. The space semi-discretized system is shown to admit a unique solution. Combining sharp estimates of the numerical stability of the discrete scheme and conditional stability estimates of the ill-posed continuous pde-model we then derive error estimates that reflect the approximation order of the finite element space and the stability of the continuous model. Two different data assimilation situations with different stability properties are considered to illustrate the framework. Full detail on how to adapt known stability estimates for the continuous model to work with the numerical analysis framework is given in appendix.

math.NA↗

The Penalty Free Nitsche Method and Nonconforming Finite Elements for the Signorini Problem

We design and analyse a Nitsche method for contact problems. Compared to the seminal work of Chouly and Hild (A Nitsche-based method for unilateral contact problems: numerical analysis. SIAM J. Numer. Anal. 51 (2013), no. 2) our method is constructed by expressing the contact conditions in a nonlinear function for the displacement variable instead of the lateral forces. The contact condition is then imposed using the nonsymmetric variant of Nitsche's method that does not require a penalty term for stability. Nonconforming piecewise affine elements are considered for the bulk discretization. We prove optimal error estimates in the energy norm.

math.NA↗

Augmented Lagrangian finite element methods for contact problems

We propose two different Lagrange multiplier methods for contact problems derived from the augmented Lagrangian variational formulation. Both the obstacle problem, where a constraint on the solution is imposed in the bulk domain and the Signorini problem, where a lateral contact condition is imposed are considered. We consider both continuous and discontinuous approximation spaces for the Lagrange multiplier. In the latter case the method is unstable and a penalty on the jump of the multiplier must be applied for stability. We prove the existence and uniqueness of discrete solutions, best approximation estimates and convergence estimates that are optimal compared to the regularity of the solution.

math.NA↗

Galerkin least squares finite element method for the obstacle problem

We construct a consistent multiplier free method for the finite element solution of the obstacle problem. The method is based on an augmented Lagrangian formulation in which we eliminate the multiplier by use of its definition in a discrete setting. We prove existence and uniqueness of discrete solutions and optimal order a priori error estimates for smooth exact solutions. Using a saturation assumption we also prove an a posteriori error estimate. Numerical examples show the performance of the method and of an adaptive algorithm for the control of the discretization error.

math.NA↗

A Cut Finite Element Method for the Bernoulli Free Boundary Value Problem

We develop a cut finite element method for the Bernoulli free boundary problem. The free boundary, represented by an approximate signed distance function on a fixed background mesh, is allowed to intersect elements in an arbitrary fashion. This leads to so called cut elements in the vicinity of the boundary. To obtain a stable method, stabilization terms is added in the vicinity of the cut elements penalizing the gradient jumps across element sides. The stabilization also ensures good conditioning of the resulting discrete system. We develop a method for shape optimization based on moving the distance function along a velocity field which is computed as the $H^1$ Riesz representation of the shape derivative. We show that the velocity field is the solution to an interface problem and we prove an a priori error estimate of optimal order, given the limited regularity of the velocity field across the interface, for the the velocity field in the $H^1$ norm. Finally, we present illustrating numerical results.

math.NA↗

Full Gradient Stabilized Cut Finite Element Methods for Surface Partial Differential Equations

We propose and analyze a new stabilized cut finite element method for the Laplace-Beltrami operator on a closed surface. The new stabilization term provides control of the full $\mathbb{R}^3$ gradient on the active mesh consisting of the elements that intersect the surface. Compared to face stabilization, based on controlling the jumps in the normal gradient across faces between elements in the active mesh, the full gradient stabilization is easier to implement and does not significantly increase the number of nonzero elements in the mass and stiffness matrices. The full gradient stabilization term may be combined with a variational formulation of the Laplace-Beltrami operator based on tangential or full gradients and we present a simple and unified analysis that covers both cases. The full gradient stabilization term gives rise to a consistency error which, however, is of optimal order for piecewise linear elements, and we obtain optimal order a priori error estimates in the energy and $L^2$ norms as well as an optimal bound of the condition number. Finally, we present detailed numerical examples where we in particular study the sensitivity of the condition number and error on the stabilization parameter.

math.NA↗

Stabilised finite element methods for ill-posed problems with conditional stability

In this paper we discuss the adjoint stabilised finite element method introduced in, E. Burman, Stabilized finite element methods for nonsymmetric, noncoercive and ill-posed problems. Part I: elliptic equations, SIAM Journal on Scientific Computing, and how it may be used for the computation of solutions to problems for which the standard stability theory given by the Lax-Milgram Lemma or the Babuska-Brezzi Theorem fails. We pay particular attention to ill-posed problems that have some conditional stability property and prove (conditional) error estimates in an abstract framework. As a model problem we consider the elliptic Cauchy problem and provide a complete numerical analysis for this case. Some numerical examples are given to illustrate the theory.

math.NA↗