arXiv subjects

Eric Feron

Publications and source records attributed to Eric Feron.

At least 19 recordsLinked to original sources

arXiv2026

V2F: Vision-Informed Grasp Force Prediction for Damage-Aware Robotic Handling of Date Fruits

This paper presents a vision-informed grasp force prediction framework for robotic handling of date fruits. Addressing the dual challenge of high detachment forces and low bruise thresholds, we first conduct mechanical characterization on date samples to define a safe grasping envelope and quantify the relationship between fruit geometry and bioyield stress. In this work, we develop a Vision-to-Force (V2F) pipeline that combines computer vision-based segmentation, active-contour refinement, and geometric feature extraction with a physics-informed residual neural network that augments a Hertz contact equation. The resulting model maps non-contact visual descriptors and cultivar metadata to predict a safe grasp force with mean validation performance of $R^2 \approx 0.7$ across unseen cultivar groups, which is a good result given the inherent mechanical variability of biological tissue. Experimental validation using a gripper and load cell indicates that the predicted forces enable stable manipulation of different types of date fruits, with residual deformations below 1 mm and no observable damage. These results show that pre-emptive, vision-driven force estimation% can replace slow and potentially damaging tactile exploration , enabling safer robotic handling of fragile fruits.

cs.RO↗

arXiv2026

Integrating Deep Learning and Contraction Theory for Robust Nonlinear State Estimation via Unsupervised Scientific Machine Learning

A common way to design observers is to add a correction term to a copy of the system; however, designing the correction term for nonlinear systems remains a significant long-standing challenge. Contraction theory offers a unified approach to designing this correction term by solving a matrix partial differential inequality (MPDI) and identifying a contraction metric. However, solving the MPDI for both the correction term and the contraction metric is highly challenging, both analytically and numerically. Therefore, the aim of this paper is to propose a learning-based approach to determine both the observer's correction term and the contraction metric by incorporating the contraction requirements into the learning process. The proposed approach relies on a scientific machine learning formulation that embeds the contraction conditions into the training loss function. The proposed approach is then extended to non-autonomous systems while keeping the correction term and contraction metric static to avoid generalization issues arising from time-dependent training. Computable bounds on the learning errors of the proposed observer are established as a function of the training residual and the sampling resolution. Furthermore, the robustness of the proposed observer to measurement noise and learning errors are established in an exponential input-to-state stability sense. Based on the robustness analysis, the present paper takes a further step by proposing a robust learning-based contraction nonlinear observer. The proposed observers are evaluated in numerical simulations for different contraction rates and measurement noise levels.

eess.SY↗

arXiv2026

Long-Horizon Geometry-Aware Navigation among Polytopes via MILP-MPC and Minkowski-Based CBFs

Autonomous navigation in complex, non-convex environments remains challenging when robot dynamics, control limits, and exact robot geometry must all be taken into account. In this paper, we propose a hierarchical planning and control framework that bridges long-horizon guidance and geometry-aware safety guarantees for a polytopic robot navigating among polytopic obstacles. At the high level, Mixed-Integer Linear Programming (MILP) is embedded within a Model Predictive Control (MPC) framework to generate a nominal trajectory around polytopic obstacles while modeling the robot as a point mass for computational tractability. At the low level, we employ a control barrier function (CBF) based on the exact signed distance in the Minkowski-difference space as a safety filter to explicitly enforce the geometric constraints of the robot shape, and further extend its formulation to a high-order CBF (HOCBF). We demonstrate the proposed framework in U-shaped and maze-like environments under single- and double-integrator dynamics. The results show that the proposed architecture mitigates the topology-induced local-minimum behavior of purely reactive CBF-based navigation while enabling safe, real-time, geometry-aware navigation.

cs.RO↗

arXiv2026

RACAS: Controlling Diverse Robots With a Single Agentic System

Many robotic platforms expose an API through which external software can command their actuators and read their sensors. However, transitioning from these low-level interfaces to high-level autonomous behaviour requires a complicated pipeline, whose components demand distinct areas of expertise. Existing approaches to bridging this gap either require retraining for every new embodiment or have only been validated across structurally similar platforms. We introduce RACAS (Robot-Agnostic Control via Agentic Systems), a cooperative agentic architecture in which three LLM/VLM-based modules (Monitors, a Controller, and a Memory Curator) communicate exclusively through natural language to provide closed-loop robot control. RACAS requires only a natural language description of the robot, a definition of available actions, and a task specification; no source code, model weights, or reward functions need to be modified to move between platforms. We evaluate RACAS on several tasks using a wheeled ground robot, a recently published novel multi-jointed robotic limb, and an underwater vehicle. RACAS consistently solved all assigned tasks across these radically different platforms, demonstrating the potential of agentic AI to substantially reduce the barrier to prototyping robotic solutions.

cs.RO↗

arXiv2026

Control and State Estimation of Vehicle-Mounted Aerial Systems in GPS-Denied, Non-Inertial Environments

We present a robust control and estimation framework for quadrotors operating in Global Navigation Satellite System(GNSS)-denied, non-inertial environments where inertial sensors such as Inertial Measurement Units (IMUs) become unreliable due to platform-induced accelerations. In such settings, conventional estimators fail to distinguish whether the measured accelerations arise from the quadrotor itself or from the non-inertial platform, leading to drift and control degradation. Unlike conventional approaches that depend heavily on IMU and GNSS, our method relies exclusively on external position measurements combined with a Extended Kalman Filter with Unknown Inputs (EKF-UI) to account for platform motion. The estimator is paired with a cascaded PID controller for full 3D tracking. To isolate estimator performance from localization errors, all tests are conducted using high-precision motion capture systems. Experimental results in a moving-cart testbed validate our approach under both translational in X-axis and Y-axis dissonance. Compared to standard EKF, the proposed method significantly improves stability and trajectory tracking without requiring inertial feedback, enabling practical deployment on moving platforms such as trucks or elevators.

cs.RO↗

arXiv2025

On the Stabilization of Rigid Formations on Regular Curves

This work deals with the problem of stabilizing a multi-agent rigid formation on a general class of planar curves. Namely, we seek to stabilize an equilateral polygonal formation on closed planar differentiable curves after a path sweep. The task of finding an inscribed regular polygon centered at the point of interest is solved via a randomized multi-start Newton-Like algorithm for which one is able to ascertain the existence of a minimizer. Then we design a continuous feedback law that guarantees convergence to, and sufficient sweeping of the curve, followed by convergence to the desired formation vertices while ensuring inter-agent avoidance. The proposed approach is validated through numerical simulations for different classes of curves and different rigid formations. Code: https://github.com/mebbaid/paper-elobaid-ifacwc-2026

cs.RO↗

arXiv2025

Intervention Strategies for Fairness and Efficiency at Autonomous Single-Intersection Traffic Flows

Intersections present significant challenges in traffic management, where ensuring safety and efficiency is essential for effective flow. However, these goals are often achieved at the expense of fairness, which is critical for trustworthiness and long-term sustainability. This paper investigates how the timing of centralized intervention affects the management of autonomous agents at a signal-less, orthogonal intersection, while satisfying safety constraints, evaluating efficiency, and ensuring fairness. A mixed-integer linear programming (MILP) approach is used to optimize agent coordination within a circular control zone centered at the intersection. We introduce the concept of fairness, measured via pairwise reversal counts, and incorporate fairness constraints into the MILP framework. We then study the relationship between fairness and system efficiency and its impact on platoon formation. Finally, simulation studies analyze the effectiveness of early versus late intervention strategies and fairness-aware control, focusing on safe, efficient, and robust management of agents within the control zone.

eess.SY↗

arXiv2025

The Dodecacopter: a Versatile Multirotor System of Dodecahedron-Shaped Modules

With the promise of greater safety and adaptability, modular reconfigurable uncrewed air vehicles have been proposed as unique, versatile platforms holding the potential to replace multiple types of monolithic vehicles at once. State-of-the-art rigidly assembled modular vehicles are generally two-dimensional configurations in which the rotors are coplanar and assume the shape of a "flight array". We introduce the Dodecacopter, a new type of modular rotorcraft where all modules take the shape of a regular dodecahedron, allowing the creation of richer sets of configurations beyond flight arrays. In particular, we show how the chosen module design can be used to create three-dimensional and fully actuated configurations. We justify the relevance of these types of configurations in terms of their structural and actuation properties with various performance indicators. Given the broad range of configurations and capabilities that can be achieved with our proposed design, we formulate tractable optimization programs to find optimal configurations given structural and actuation constraints. Finally, a prototype of such a vehicle is presented along with results of performed flights in multiple configurations.

cs.RO↗

arXiv2024

Mixed-Integer Linear Programming Model for Collision Avoidance Planning in Commercial Aircraft Formations

With advancements in technology, commercial aircraft formation flying is becoming increasingly feasible as an efficient and environmentally friendly flight method. However, gaps remain in practical implementation, particularly in collision avoidance for aircraft formations. Existing avoidance algorithms mainly focus on single aircraft or UAV swarms, lacking comprehensive studies on the complex interactions within commercial aircraft formations. To address this, this paper proposes an optimization model designed to generate safe and effective collision avoidance solutions for commercial aircraft formations. This model demonstrates avoidance paths for formations facing intruders and offers insights for developing formation flight strategies. This study explores response strategies for commercial aircraft formations encountering intruders, considering the difficulty of pilot maneuvers. The findings provide theoretical support for the practical implementation of commercial formation flying and may advance the adoption of this technology.

eess.SY↗

arXiv2024

Early Versus Late Traffic Management For Autonomous Agents

Intersections pose critical challenges in traffic management, where maintaining operational constraints and ensuring safety are essential for efficient flow. This paper investigates the effect of intervention timing in management strategies on maintaining operational constraints at intersections while ensuring safe separation distance, avoiding collisions, and minimizing delay. We introduce control regions, represented as circles around the intersection, which refers to the timing of interventions by a centralized control system when agents approach the intersection. We use a mixed-integer linear programming (MILP) approach to optimize the system's performance. To analyze the effectiveness of early and late control measures, a simulation study is conducted, focusing on the safe, efficient, and robust management of agent movement within the control regions.

eess.SY↗

arXiv2024

Towards a Robust Soft Baby Robot With Rich Interaction Ability for Advanced Machine Learning Algorithms

Advanced machine learning algorithms require platforms that are extremely robust and equipped with rich sensory feedback to handle extensive trial-and-error learning without relying on strong inductive biases. Traditional robotic designs, while well-suited for their specific use cases, are often fragile when used with these algorithms. To address this gap -- and inspired by the vision of enabling curiosity-driven baby robots -- we present a novel robotic limb designed from scratch. Our design has a hybrid soft-hard structure, high redundancy with rich non-contact sensors (exclusively cameras), and easily replaceable failure points. Proof-of-concept experiments using two contemporary reinforcement learning algorithms on a physical prototype demonstrate that our design is able to succeed in a simple target-finding task even under simulated sensor failures, all with minimal human oversight during extended learning periods. We believe this design represents a concrete step toward more tailored robotic designs for achieving general-purpose, generally intelligent robots.

cs.RO↗

arXiv2024

Polynomial Lyapunov Functions and Invariant Sets from a New Hierarchy of Quadratic Lyapunov Functions for LTV Systems

We introduce a new class of quadratic functions based on a hierarchy of linear time-varying (LTV) dynamical systems. These quadratic functions in the higher order space can be also seen as a non-homogeneous polynomial Lyapunov functions for the original system, i.e the first system in the hierarchy. These non-homogeneous polynomials are used to obtain accurate outer approximation for the reachable set given the initial condition and less conservative bounds for the impulse response peak of linear, possibly time-varying systems. In addition, we pose an extension to the presented approach to construct invariant sets that are not necessarily Lyapunov functions. The introduced methods are based on elementary linear systems theory and offer very much flexibility in defining arbitrary polynomial Lyapunov functions and invariant sets for LTV systems.

eess.SY↗

arXiv2023

Algebraic Lyapunov Functions for Homogeneous Dynamic Systems

A method for constructing homogeneous Lyapunov functions of degree 1 from polynomial invariant sets is presented for linear time varying systems, homogeneous dynamic systems and the class of nonlinear systems that can be represented as such. The method allows the development of Lyapunov functions that are not necessarily symmetric about the origin, unlike the polynomial, homogeneous Lyapunov functions discussed in the prior literature. The work is illustrated by very simple examples.

math.DS↗

arXiv2022

From Observability to Observer Realization: A path via elementary block-diagram manipulations

Introductory state-space linear control courses focus on linear, time-invariant systems and spend intense efforts by introducing system realizations that allow the student to grasp fundamental concepts, among which controllability, observability, and controller and observer design. This note describes a graphical mechanism to transform a system expressed in observability form into its observer form based on elementary block diagram manipulations, a technique whose pedagogical usefulness tends to be overlooked. Given the well-known duality principle in linear systems with respect to controllability and observability, the proposed graphical mechanism is applicable to transform from controllability to controller realization.

eess.SY↗

arXiv2022

Computing Bounds on $L_{\infty}$-induced Norm for Linear Time-Invariant Systems Using Homogeneous Lyapunov Functions

Quadratic Lyapunov function has been widely used in the analysis of linear time invariant (LTI) systems ever since it has shown that the existence of such quadratic Lyapunov function certifies the stability of the LTI system. In this work, the problem of finding upper and lower bounds for the $L_{\infty}$-induced norm of the LTI system is considered. Quadratic Lyapunov functions are used to find the star norm, the best upper on the $L_{\infty}$-induced norm, by bounding the unit peak input reachable sets by inescapable ellipsoids. Instead, a more general class of homogeneous Lyapunov functions is used to get less conservative upper bounds on the $L_{\infty}$-induced norm and better conservative approximations for the reachable sets than those obtained using standard quadratic Lyapunov functions. The homogeneous Lyapunov function for the LTI system is considered to be a quadratic Lyapunov function for a higher-order system obtained by Lifting the LTI system via Kronecker product. Different examples are provided to show the significant improvements on the bounds obtained by using Homogeneous Lyapunov functions.

eess.SY↗

arXiv2021

Run Time Assurance for Safety-Critical Systems: An Introduction to Safety Filtering Approaches for Complex Control Systems

Run Time Assurance (RTA) Systems are online verification mechanisms that filter an unverified primary controller output to ensure system safety. The primary control may come from a human operator, an advanced control approach, or an autonomous control approach that cannot be verified to the same level as simpler control systems designs. The critical feature of RTA systems is their ability to alter unsafe control inputs explicitly to assure safety. In many cases, RTA systems can functionally be described as containing a monitor that watches the state of the system and output of a primary controller, and a backup controller that replaces or modifies control input when necessary to assure safety. An important quality of an RTA system is that the assurance mechanism is constructed in a way that is entirely agnostic to the underlying structure of the primary controller. By effectively decoupling the enforcement of safety constraints from performance-related objectives, RTA offers a number of useful advantages over traditional (offline) verification. This article provides a tutorial on developing RTA systems.

eess.SY↗

arXiv2021

On Linear Time-Invariant Systems Analysis via A Single Trajectory: A Linear Programming Approach

In this note, a novel methodology that can extract a number of analysis results for linear time-invariant systems (LTI) given only a single trajectory of the considered system is proposed. The superiority of the proposed technique relies on the fact that it provides an automatic and formal way to obtain valuable information about the controlled system by only having access to a single trajectory over a finite period of time (i.e., the system dynamics is assumed to be unknown). At first, we characterize the stability region of LTI systems given only a single trajectory dataset by constructing the associated Lyapunov function of the system. The Lyapunov function is found by formulating and solving a linear programming (LP) problem. Then, we extend the same methodology to a variety of essential analysis results for LTI systems such as deriving bounds on the output energy, deriving bounds on output peak, deriving $\mathbf{L}_2$ and RMS gains. To illustrate the efficacy of the proposed data-driven paradigm, a comparison analysis between the learned LTI system metrics and the true ones is provided.

eess.SY↗

arXiv2021

Analyzing and comparing door-to-door travel times for air transportation using aggregated Uber data

Improving the passenger air travel experience is one of the explicit goals set by the Next Generation Air Transportation System in the United States and by the Advisory Council for Aeronautics Research in Europe FlightPath 2050. Both suggest door-to-door travel times as a potential metric for these objectives. In this paper, we propose a data-driven model to estimate door-to-door travel times and compare the reach and performance of different access modes to a city, as well as conduct segment analysis of full door-to-door trips. This model can also be used to compare cities with respect to the integration of their airport within their road structure. We showcase multiple applications of this full door-to-door travel time model to demonstrate how the model can be used to locate where progress can be made.

cs.OH↗