arXiv subjects

Eric Chatterjee

Publications and source records attributed to Eric Chatterjee.

13 recordsLinked to original sources

arXiv2025

Quantum-Limited Acoustoelectric Amplification in a Piezoelectric-2DEG Heterostructure

We provide a quantum mechanical description of phonon amplification in a heterostructure consisting of a two-dimensional electron gas (2DEG) stacked on top of a piezoelectric material. An applied drift voltage effectively creates a population inversion in the momentum states of the 2DEG electrons, giving rise to spontaneous emission of phonons. Once an acoustic wave is launched, the pumped electrons release phonons via stimulated emission, returning to depleted ground states before being pumped back to the excited states. We show that whereas efficient amplification using a 1D electron gas requires the acoustic wavelength to roughly equal the average electron-electron spacing, a 2DEG enables efficient amplification for any wavelength greater than the average electron-electron spacing. We derive the imaginary and real parts of the 2DEG first-order acoustic susceptibility as functions of electronic drift velocity in specific limits and derive the gain per unit length for the signal and the quantum noise, with the gain matching the classical result in the short-electronic-lifetime (low-mobility) regime. Moreover, we analyze the gain clamping due to pump depletion and calculate the maximum achievable intensity. Our results provide a framework for designing novel acoustic devices including a quantum phononic laser and phase-insensitive quantum phononic amplifiers.

cond-mat.mes-hall↗

arXiv2025

An Electrically Injected and Solid State Surface Acoustic Wave Phonon Laser

Surface acoustic waves (SAWs) enable a wide array of technologies including RF filters, chemical and biological sensors, acousto-optic devices, acoustic control of microfluidic flow in lab-on-a-chip systems, and quantum phononics. While numerous methods exist for generating SAWs, they each have intrinsic limitations that inhibit performance, operation at high frequencies, and use in systems constrained in size, weight, and power. Here, for the first time, we present a completely solid-state, single-chip SAW phonon laser that is comprised of a lithium niobate SAW resonator with an internal, DC electrically injected and broadband semiconductor gain medium with $<$0.15 mm$^2$ footprint. Below the threshold bias of 36 V, the device behaves as a resonant amplifier, and above it exhibits self-sustained coherent oscillation, linewidth narrowing, and high output powers. A continuous on-chip acoustic output power of up to -6.1 dBm is generated at 1 GHz with a resolution-limited linewidth of $<$77 Hz and a carrier phase noise of -57 dBc/Hz at 1 kHz offset. Through detailed modeling, we show pathways for improving these devices' performance including mHz linewidths, sub -100 dBc/Hz phase noise at 1 kHz, high power efficiency, footprints less than 550 um$^2$ at 10 GHz, and SAW generation approaching the hundreds of GHz regime. This demonstration provides a fundamentally new approach to SAW generation, paving the way toward ultra-high-frequency SAW sources on a chip and highly miniaturized and efficient SAW-based systems that can be operated without an external RF source.

physics.app-ph↗

arXiv2024

Ab-Initio Calculations of Nonlinear Susceptibility and Multi-Phonon Mixing Processes in a 2DEG-Piezoelectric Heterostructure

Solid-state elastic-wave phonons are a promising platform for a wide range of quantum information applications. An outstanding challenge and enabling capability in harnessing phonons for quantum information processing is achieving strong nonlinear interactions between them. To this end, we propose a general architecture using piezoelectric-semiconductor heterostructures consisting of a piezoelectric acoustic material hosting phonon modes in direct proximity to a two-dimensional electron gas (2DEG). Each phonon in the piezoelectric material carries an electric field, which extends into the 2DEG. The fields induce polarization of 2DEG electrons, which in turn interact with other piezoelectric phononic electric fields. The net result is coupling between the various phonon modes. We derive, from first principles, the nonlinear phononic susceptibility of the system. We show that many nonlinear processes are strongly favored at high electron mobility, motivating the use of the 2DEG to mediate the nonlinearities. We derive in detail the first, second, and third-order susceptibilities and calculate them for the case of a lithium niobate surface acoustic wave interacting with a GaAs-AlGaAs heterostructure 2DEG. We show that, for this system, the strong third-order nonlinearity could enable single-phonon Kerr shift in an acoustic cavity that exceeds realistic cavity linewidths, potentially leading to a new class of acoustic qubit. We further show that the strong second-order nonlinearity could be used to produce a high-gain, traveling-wave parametric amplifier to amplify--and ultimately detect--the outputs of the acoustic cavity qubits. Assuming favorable losses in such a system, these capabilities, combined with the ability to efficiently transduce phonons from microwave electromagnetic fields in transmission lines, thus hold promise for creating all-acoustic quantum information processors.

physics.app-ph↗

arXiv2022

Label-free quantum super-resolution imaging using entangled multi-mode squeezed light

In this study, we explore the theoretical application of entangled multi-mode squeezed light for label-free optical super-resolution imaging. By generating massively entangled multi-mode squeezed light through an array of balanced beam splitters, using a single-mode squeezed light input, we create a multi-mode quantum light state with exceptional entanglement and noise suppression below the shot noise level. This significantly reduces imaging measurement errors compared to classical coherent state light imaging when the same number of photons are used on the imaging sample. We demonstrate how to optimize the imaging system's parameters to achieve the Heisenberg imaging error limit, taking into account the number of entangled modes and photons used. We also examine the effects of optical losses in the imaging system, necessitating adjustments to the optimized parameters based on the degree of optical loss. In practical applications, this new quantum imaging approach reduces the number of photons needed to achieve the same image quality by two orders of magnitude compared to classical imaging methods that use non-entangled, non-squeezed coherent state light.

quant-ph↗

arXiv2022

Ultra-High-Precision Detection of Single Microwave Photons based on a Hybrid System between Majorana Zero Mode and a Quantum Dot

The ability to detect single photons has become increasingly essential due to the rise of photon-based quantum computing. In this theoretical work, we propose a system consisting of a quantum dot (QD) side-coupled to a superconducting nanowire. The coupling opens a gap in both the QD mode and the Majorana zero mode (MZM) at the nanowire edge, enabling photon absorption in the system. We show that the absorbed photoelectron decays via rapid (sub-nanosecond to nanosecond) nonradiative heat transfer to the nanowire phonon modes rather than by spontaneous emission. Furthermore, we calculate the temperature increase and associated resistance increase induced by the absorption of a photon for a given appropriate set of material and environmental parameters, yielding a temperature increase in the millikelvin range and a resistance increase in the kiloohm range, vastly exceeding the photon-absorption-induced temperature and resistance increases for competing 2D-3D hybrid systems by 5 and 9 orders of magnitude, respectively. Lastly, we determine the detector efficiency and discuss the system density required for deterministic photon number measurement, demonstrating that a photon absorption probability of over 99.9 percent can be achieved for an integrated system consisting of an array of nanowire-QD complexes on-chip inside a cavity. Our results thus provide a basis for a deterministic microwave photon number detector with an unprecedented photon-number-detection resolution.

cond-mat.mes-hall↗

arXiv2021

Reconfigurable quantum phononic circuits via piezo-acoustomechanical interactions

We show that piezoelectric strain actuation of acoustomechanical interactions can produce large phase velocity changes in an existing quantum phononic platform: aluminum nitride on suspended silicon. Using finite element analysis, we demonstrate a piezo-acoustomechanical phase shifter waveguide capable of producing +/- pi phase shifts for GHz frequency phonons in 10s of microns with 10s of volts applied. Then, using the phase shifter as a building block, we demonstrate several phononic integrated circuit elements useful for quantum information processing. In particular, we show how to construct programmable multi-mode interferometers for linear phononic processing and a dynamically reconfigurable phononic memory that can switch between an ultra-long-lifetime state and a state strongly coupled to its bus waveguide. From the master equation for the full open quantum system of the reconfigurable phononic memory, we show that it is possible to perform "read" and "write" operations with over 90% quantum state transfer fidelity for an exponentially decaying pulse.

quant-ph↗

arXiv2020

Optimal Quantum Transfer from Input Flying Qubit to Lossy Quantum Memory

In a quantum network, a key challenge is to minimize the direct reflection of flying qubits as they couple to stationary, resonator-based memory qubits, as the reflected amplitude represents state transfer infidelity that cannot be directly recovered. Optimizing the transfer fidelity can be accomplished by dynamically varying the resonator's coupling rate to the flying qubit field. Here, we analytically derive the optimal coupling rate profile in the presence of intrinsic loss of the quantum memory using an open quantum systems method that can account for intrinsic resonator losses. We show that, since the resonator field must be initially empty, an initial amplitude in the resonator must be generated in order to cancel reflections via destructive interference; moreover, we show that this initial amplitude can be made sufficiently small as to allow the net infidelity throughout the complete transfer process to be close to unity. We then derive the time-varying resonator coupling that maximizes the state transfer fidelity as a function of the initial population and intrinsic loss rate, providing a complete protocol for optimal quantum state transfer between the flying qubit and resonator qubit. We present analytical expressions and numerical examples of the fidelities for the complete protocol using exponential and Gaussian profiles. We show that a state transfer fidelity of around 99.9% can be reached for practical intrinsic losses of resonators used as quantum memories.

quant-ph↗

arXiv2020

Microwave Photon Number Resolving Detector Using the Topological Surface State of Superconducting Cadmium Arsenide

Photon number resolving detectors play a central role in quantum optics. A key challenge in resolving the number of absorbed photons in the microwave frequency range is finding a suitable material that provides not only an appropriate band structure for absorbing low-energy photons but also a means of detecting a discrete photoelectron excitation. To this end, we propose to measure the temperature gain after absorbing a photon using superconducting cadmium arsenide (Cd3As2) with a topological semimetallic surface state as the detector. The surface electrons absorb the incoming photons and then transfer the excess energy via heat to the superconducting bulk's phonon modes. The temperature gain can be determined by measuring the change in the zero-bias bulk resistivity, which does not significantly affect the lattice dynamics. Moreover, the obtained temperature gain scales discretely with the number of absorbed photons, enabling a photon-number resolving function. Here, we will calculate the temperature increase as a function of the number and frequency of photons absorbed. We will also derive the timescale for the heat transfer process from the surface electrons to the bulk phonons. We will specifically show that the transfer processes are fast enough to ignore heat dissipation loss.

cond-mat.mes-hall↗

arXiv2020

High-fidelity State Transfer Between Leaky Quantum Memories

We derive the optimal analytical quantum-state-transfer control solutions for two disparate quantum memory blocks. Employing the SLH formalism description of quantum network theory, we calculate the full quantum dynamics of system populations, which lead to the optimal solution for the highest quantum fidelity attainable. We show that, for the example where the mechanical modes of two optomechanical oscillators act as the quantum memory blocks, their optical modes and a waveguide channel connecting them can be used to achieve a quantum state transfer fidelity of 96% with realistic parameters using our derived optimal control solution. The effects of the intrinsic losses and the asymmetries in the physical memory parameters are discussed quantitatively.

quant-ph↗

arXiv2019

Low-Temperature Annihilation Rate for Quasi-Localized Excitons in Monolayer MoS2

The strong Coulomb forces in monolayer transition metal dichalcogenides ensure that optical excitation of band electrons gives rise to Wannier-Mott excitonic states, each of which can be conceptualized as a composite of a Gaussian wavepacket corresponding to center-of-mass motion and an orbital state corresponding to the motion of the electron and hole about the center-of-mass. Here, we show that at low temperature in monolayer MoS2, given quasi-localized excitons and consequently a significant inter-exciton spacing, the excitons undergo dipole-dipole interaction and annihilate one another in a manner analogous to Auger recombination. To construct our model, we assume that each exciton is localized in a region whose length is on the same scale as the excitonic diameter, thus causing the exciton to behave in a fermionic manner, while the distance between neighboring excitons is much larger than the exciton diameter. We construct the orbital ladder operators for each exciton and apply Fermi's Golden Rule to derive the overall recombination rate as a function of exciton density.

cond-mat.mes-hall↗

arXiv2019

Nonlinear optical response of a local surface plasmon coupled to a 2D material

We present a theoretical study of the optical response of a nonlinear oscillator formed by coupling a metal nanoparticle local surface plasmon resonance to excitonic degrees of freedom in a monolayer transition-metal dichalcogenide. We show that the combined system should exhibit strong anharmonicity in its low-lying states, predicting for example a seven order-of-magnitude increase in nonlinearity relative to a silicon photonic crystal cavity. Then, we demonstrate that such system exhibits strong quantum features such as antibunching and non-Gaussianity. Arrays of such nanoscale nonlinear oscillators could be used to realize novel optical metamaterials; alternatively, an individual nanoparticle-monolayer construct could be coupled to an optical resonator to mediate efficient input-output coupling to propagating fields.

cond-mat.mes-hall↗

arXiv2017

Optical nonlinearities of excitons in monolayer MoS2

We calculate linear and nonlinear optical susceptibilities arising from the excitonic states of mono- layer MoS2 for in-plane light polarizations, using second-quantized bound and unbound exciton operators. Optical selection rules are critical for obtaining the susceptibilities. We derive the valley-chirality rule for the second harmonic generation in monolayer MoS2, and find that the third- harmonic process is efficient only for linearly polarized input light while the third-order two photon process (optical Kerr effect) is efficient for circularly polarized light using a higher order exciton state. The absence of linear absorption due to the band gap and the unusually strong two-photon third-order nonlinearity make the monolayer MoS2 excitonic structure a promising resource for coherent nonlinear photonics.

cond-mat.mes-hall↗

arXiv2012

Raman spectroscopy study of rotated double-layer graphene: Misorientation-angle dependence of electronic structure

We present a systematic Raman study of unconventionally-stacked double-layer graphene, and find that the spectrum strongly depends on the relative rotation angle between layers. Rotation-dependent trends in the position, width and intensity of graphene 2D and G peaks are experimentally established and accounted for theoretically. Our theoretical analysis reveals that changes in electronic band structure due to the interlayer interaction, such as rotational-angle dependent Van Hove singularities, are responsible for the observed spectra features. Our combined experimental and theoretical study provides a deeper understanding of the electronic band structure of rotated double-layer graphene, and leads to a practical way to identify and analyze rotation angles of misoriented double-layer graphene.

cond-mat.mes-hall↗