arXiv subjects

Eric Brown

Publications and source records attributed to Eric Brown.

At least 19 recordsLinked to original sources

arXiv2024

Strain stiffening due to stretching of entangled particles in random packings of granular materials

Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling clusters of entangled chains. The number of entanglements is nearly proportional to the area surrounded by entangling particles with an excluded volume effect. A tendency was found for chain links to stretch when the packing was strained. The slope of the stress-strain relation of the packing can be calculated from a mean-field model consisting of the product of the effective extensional modulus of the chain, packing fraction, probability of stretched links, and the ratio of strain of stretched links to packing strain. The stress-strain model requires as input measurements of the ratio between local particle deformation and global average strain, and the probability of stretching for non-rigid particles. This results in a quadratic prediction for the stress-strain curve, with a curvature that agrees with experiments within the model uncertainties. This model explains that the strength of these packings comes from stretching of the links of chains, but only when the system-filling network of entanglements provides constraints that prevents failure by shear banding, so that particles must be deformed to move further under strain. In this model, the increasing slope of the stress-strain curve is mainly due to the fraction of stretched links increasing with strain. This model for the stress-strain relation is shown to be generalizable to different shapes of entangling particles by applying it to staples.

cond-mat.soft↗

arXiv2024

Multi-step Inference over Unstructured Data

The advent of Large Language Models (LLMs) and Generative AI has revolutionized natural language applications across various domains. However, high-stakes decision-making tasks in fields such as medical, legal and finance require a level of precision, comprehensiveness, and logical consistency that pure LLM or Retrieval-Augmented-Generation (RAG) approaches often fail to deliver. At Elemental Cognition (EC), we have developed a neuro-symbolic AI platform to tackle these problems. The platform integrates fine-tuned LLMs for knowledge extraction and alignment with a robust symbolic reasoning engine for logical inference, planning and interactive constraint solving. We describe Cora, a Collaborative Research Assistant built on this platform, that is designed to perform complex research and discovery tasks in high-stakes domains. This paper discusses the multi-step inference challenges inherent in such domains, critiques the limitations of existing LLM-based methods, and demonstrates how Cora's neuro-symbolic approach effectively addresses these issues. We provide an overview of the system architecture, key algorithms for knowledge extraction and formal reasoning, and present preliminary evaluation results that highlight Cora's superior performance compared to well-known LLM and RAG baselines.

cs.CL↗

arXiv2023

Interactions between two adjacent convection rolls in turbulent Rayleigh-Benard convection

Rayleigh-B{\'e}nard convection experiments were done with two adjacent cubic cells with a partial wall in between to force the generation of two interacting convection rolls. Observed stable states include both counter-rotating and co-rotating states. The stability of each of these states and their dynamics were modeled by stochastic ordinary differential equations of motion in terms of the orientation, amplitude, and mean temperature of each convection roll. The form of the interaction terms is predicted based on an effective turbulent diffusion of temperature between the adjacent rolls. Predictions are made for stable fixed points of the co- and counter-rotating states. This suggests that the same turbulent thermal diffusivity that describes macroscopically averaged heat transport also controls the interactions between neighboring convection rolls. The surprising stability of co-rotating states is due to the temperature difference between the neighboring rolls becoming large enough that the heat flux between the rolls stabilizes the temperature profile of aligned co-rotating states. This temperature difference can be driven by heating the plates of the two cells to different mean temperatures. This shifts the orientations of the rolls of counter-rotating states in opposite directions, and for large temperature differences only co-rotating states are stable Spontaneous switching between co-rotating and counter-rotating states is also observed. Switching to counter-rotating states occurs mainly due to cessation (a significant weakening of a convection roll), which reduces damping on changes in orientation, allowing the orientation to change rapidly due to diffusive fluctuations. Switching to co-rotating states is mainly driven by smaller diffusive fluctuations, which have a positive feedback that destabilizes the counter-rotating state.

physics.flu-dyn↗

arXiv2020

Effects of tilt on the orientation dynamics of the large-scale circulation in turbulent Rayleigh-B{\'e}nard convection

We experimentally test the effects of tilting a turbulent Rayleigh-B{\'e}nard convection cell on the dynamics of the large-scale circulation (LSC) orientation $\theta_0$. The probability distribution of $\theta_0$ is measured, and used to obtain a tilt-induced potential acting on $\theta_0$, which is used in a low-dimensional model of diffusion of $\theta_0$ in a potential. The form of the potential is sinusoidal in $\theta_0$, and linear in tilt angle for small tilt angles, which is explained by a simple geometric model of the vector direction of the mean buoyancy force acting on the LSC. However, the magnitude of the tilt-induced forcing is found to be two orders of magnitude larger than previously predicted. When this parameter is adjusted to match values obtained from the probability distribution of $\theta_0$, the diffusive model can quantitatively predict effects of tilt on $\theta_0$. In particular, tilt causes a change in potential barrier height between neighboring corners of a cubic cell, and changes in the barrier-crossing rate for $\theta_0$ to escape a corner are predicted with an accuracy of $\pm30\%$. As a cylindrical cell is tilted, the tilt-induced potential provides a restoring force which induces oscillations when it exceeds the strength of damping; this critical tilt angle is predicted within 20\%, and the prediction is consistent with measured oscillation frequencies. These observations show that a self-consistent low-dimensional model can be extended to include the dynamics of $\theta_0$ due to tilt. However, the underprediction of the effect of tilt on $\theta_0$ warrants revisiting the predicted magnitude.

physics.flu-dyn↗

arXiv2020

Intermittent dilation and its coupling to stress in discontinuous shear thickening suspensions

We investigate dilation-induced surface deformations in a Discontinuous Shear Thickening (DST) suspension to determine the relationship between dilation and stresses in DST. Video is taken at two observation points on the surface of the suspension in a rheometer while shear and normal stresses are measured. A roughened surface of the suspension is observed as particles poke through the liquid-air interface, corresponding to dilation. Dilation events are found to be intermittent and localized spatially. Shear and normal stresses also fluctuate between high- and low-stress states, and dilation is observed frequently in the high stress state. On the other hand, a complete lack of dilation is observed when the stresses remain at low values for a several seconds. Dilation is most prominent while the stresses grow from the low-stress state to the high-stress state, and the dilated region tends to span the entire surface by the end of the stress growth period. Dilation is found only at stresses and shear rates in and above the shear thickening range. These observed relations between surface dilation and stresses confirm that dilation and stresses are coupled in the high-stress state of DST.

cond-mat.soft↗

arXiv2020

Oscillation in the temperature profile of the large-scale circulation of turbulent convection induced by a cubic container

We present observations of oscillations in the shape of the temperature profile of the large-scale circulation (LSC) of turbulent Rayleigh-B{\'e}nard convection. Temperature measurements are broken down into Fourier moments as a function of $\theta-\theta_0$, where $\theta$ is the azimuthal angle in a horizontal plane at mid-height, and $\theta_0$ is the LSC orientation. The oscillation structure is dominated by a 3rd order sine moment and 3rd order cosine moment in a cubic cell. In contrast, these moments are not found to oscillate in a cylindrical cell. This geometry-dependent behavior can be explained by a model that assumes that the heat transported by the LSC is conducted from the thermal boundary layers, and is proportional to pathlength of the LSC along boundary layers at the top and bottom plates. In a non-circular cross-section cell, oscillations of the LSC orientation $\theta_0$ result in an oscillation in the container shape in the reference frame of the LSC, resulting in an oscillation in the pathlength of the LSC at a given $\theta-\theta_0$. In a square-cross-section cell, this model predicts the dominant 3rd order sine moment and 3rd order cosine moment with magnitudes within 50\% of measured values, when using the amplitude of the oscillation of $\theta_0$ as input. A cylindrical cell is special in that the pathlength is independent of $\theta_0$, and so these oscillating moments are not induced. In a cylindrical cell, the model reproduces the sinusoidal mean temperature profile with a sloshing oscillation dominated by the 2nd order sine moment, consistent with previous observations in that geometry.

physics.flu-dyn↗

arXiv2019

Low-dimensional model of the large-scale circulation of turbulent Rayleigh-B{\'e}nard convection in a cubic container

We test the ability of a low-dimensional turbulence model to predict how dynamics of large-scale coherent structures such as convection rolls change in different cell geometries. We performed Rayleigh-B\'enard convection experiments in a cubic container, in which there is a single convection roll known as the large-scale circulation (LSC). The model describes the motion of the orientation $\theta_0$ of the LSC as diffusion in a potential which is predicted as a function of the shape of the cell from an approximate solutions of the Navier-Stokes equations. The model predicts advected oscillation modes, driven by a restoring force created by the non-circular cell cross-section. We observe the predicted lowest-wavenumber mode in which the LSC orientation $\theta_0$ oscillates around a corner, and a slosh angle $\alpha$ rocks back and forth, which is distinct from the higher-wavenumber advected twisting and sloshing oscillations found in cylindrical cells. The potential has quadratic minima near each corner with the same curvature in both the LSC orientation $\theta_0$ and slosh angle $\alpha$, as predicted. The new oscillation mode around corners is found above a critical Ra $=4\times10^8$, which appears in the model as a crossing of an underdamped-overdamped transition. The natural frequency of the potential, oscillation period, power spectrum, and critical Ra for oscillations are all within a factor of 3 of model predictions for the Rayleigh number range $8\times10^7 \le Ra \le 3\times 10^9$. However, these uncertainties in model parameters are too large to correctly predict whether the system is in the underdamped or overdamped state at a given Ra. The success of the model at predicting the potential and flow modes for a cubic cell suggests that such a modeling approach could be applied more generally to different cell geometries that support a single convection roll.

physics.flu-dyn↗

arXiv2019

Ask2Me VarHarmonizer: A Python-Based Tool to Harmonize Variants from Cancer Genetic Testing Reports and Map them to the ClinVar Database

PURPOSE: The popularity of germline genetic panel testing has led to a vast accumulation of variant-level data. Variant names are not always consistent across laboratories and not easily mappable to public variant databases such as ClinVar. A tool that can automate the process of variants harmonization and mapping is needed to help clinicians ensure their variant interpretations are accurate. METHODS: We present a Python-based tool, Ask2Me VarHarmonizer, that incorporates data cleaning, name harmonization, and a four-attempt mapping to ClinVar procedure. We applied this tool to map variants from a pilot dataset collected from 11 clinical practices. Mapping results were evaluated with and without the transcript information. RESULTS: Using Ask2Me VarHarmonizer, 4728 out of 6027 variant entries (78%) were successfully mapped to ClinVar, corresponding to 3699 mappable unique variants. With the addition of 1099 unique unmappable variants, a total of 4798 unique variants were eventually identified. 427 (9%) of these had multiple names, of which 343 (7%) had multiple names within-practice. 99% mapping consistency was observed with and without transcript information. CONCLUSION: Ask2Me VarHarmonizer aggregates and structures variant data, harmonizes names, and maps variants to ClinVar. Performing harmonization removes the ambiguity and redundancy of variants from different sources.

q-bio.QM↗

arXiv2018

An effective packing fraction for better resolution near the critical point of shear thickening suspensions

We present a technique for obtaining an effective packing fraction for discontinuous shear thickening suspensions near a critical point. It uses a measurable quantity that diverges at the critical point -- in this case the inverse of the shear rate $\dot\gamma_c^{-1}$ at the onset of discontinuous shear thickening -- as a proxy for packing fraction $\phi$. We obtain an effective packing fraction for cornstarch and water by fitting $\dot\gamma_c^{-1}(\phi)$, then invert the function to obtain $\phi_{eff}(\dot\gamma_c)$. We further include the dependence of $\dot\gamma_c^{-1}$ on the rheometer gap $d$ to obtain the function $\phi_{eff}(\dot\gamma_c,d)$. This effective packing fraction $\phi_{eff}$ has better resolution near the critical point than the raw measured packing fraction $\phi$ by as much as an order of magnitude. Furthermore, $\phi_{eff}$ normalized by the critical packing fraction $\phi_c$ can be used to compare rheology data for cornstarch and water suspensions from different lab environments with different temperature and humidity. This technique can be straightforwardly generalized to improve resolution in any system with a diverging quantity near a critical point.

cond-mat.soft↗

arXiv2018

Testing constitutive relations by running and walking on cornstarch and water suspensions

The ability of a person to run on the surface of a suspension of cornstarch and water has fascinated scientists and the public alike. However, the constitutive relation obtained from traditional steady-state rheology of cornstarch and water suspensions has failed to explain this behavior. In a previous paper, we presented an averaged constitutive relation for impact rheology consisting of an effective compressive modulus of a system-spanning dynamically jammed structure (arXiv:1407:0719). Here, we show that this constitutive model can be used to quantitatively predict, for example, the trajectory and penetration depth of the foot of a person walking or running on cornstarch and water. The ability of the constitutive relation to predict the material behavior in a case with different forcing conditions and flow geometry than it was obtained from suggests that the constitutive relation could be applied more generally. We also present a detailed calculation of the added mass effect to show that while it may be able to explain some cases of people running or walking on the surface of cornstarch and water for pool depths $H >1.2$ m and foot impact velocities $V_I> 1.7$ m/s, it cannot explain observations of people walking or running on the surface of cornstarch and water for smaller $H$ or $V_I$.

cond-mat.soft↗

arXiv2018

Gaussian ancillary bombardment

We analyze in full detail the time evolution of an open Gaussian quantum system rapidly bombarded by Gaussian ancillae. As a particular case this analysis covers the thermalization (or not) of a harmonic oscillator coupled to a thermal reservoir made of harmonic oscillators. We derive general results for this scenario and apply them to the problem of thermalization. We show that only a particular family of system-environment couplings will cause the system to thermalize to the temperature of its environment. We discuss that if we want to understand thermalization as ensuing from the Markovian interaction of a system with the individual microconstituents of its (thermal) environment then the process of thermalization is not as robust as one might expect.

quant-ph↗

arXiv2017

A classification of open Gaussian dynamics

We introduce a classification scheme for the generators of bosonic open Gaussian dynamics, providing instructive diagrams description for each type of dynamics. Using this classification, we discuss the consequences of imposing complete positivity on Gaussian dynamics. In particular, we show that non-symplectic operations must be active to allow for complete positivity. In addition, non-symplectic operations can, in fact, conserve the volume of phase space only if the restriction of complete positivity is lifted. We then discuss the implications for the relationship between information and energy flows in open quantum mechanics.

quant-ph↗

arXiv2017

System-spanning dynamically jammed region in response to impact of cornstarch and water suspensions

We experimentally characterize the impact response of concentrated suspensions of cornstarch and water. We hypothesize that the dynamically jammed region that propagates ahead of the impactor is responsible for the strong stress response to impact when it spans between solid boundaries. Using surface imaging and particle tracking at the boundary opposite the impactor, we observed that a visible structure and particle flow at the boundary occur with a delay after impact. We show the delay time is about the same time as the the strong stress response, confirming that the strong stress response results from deformation of the dynamically jammed structure once it spans between the impactor and a solid boundary. A characterization of this strong stress response is reported in a companion paper (arXiv:1407.0719). We also elaborate on the structure of the dynamically jammed region once it spans from the impactor to a solid boundary. We observed particle flow in the outer part of the dynamically jammed region at the bottom boundary, with a net transverse displacement of up to about 5\% of the impactor displacement, indicating shear at the boundary. Direct imaging of the surface of the outer part of the dynamically jammed region reveals a change in surface structure that appears the same as the result of dilation in other cornstarch suspensions. Imaging also reveals cracks, like a brittle solid. These observations suggest the dynamically jammed structure can temporarily support stress according to an effective modulus, like a soil or dense granular material, along a network of frictional contacts between the impactor and solid boundary.

cond-mat.soft↗

arXiv2017

Effective magnetic susceptibility of suspensions

We characterize how suspensions of magnetic particles in a liquid respond to a magnetic field in terms of the effective magnetic susceptibility $\chi_{eff}$ using inductance measurements. We test a model that predicts how $\chi_{eff}$ varies due to demagnetization, as a function of sample aspect ratio, particle packing fraction, and particle aspect ratio. For spherical particles or cylindrical particles aligned with external magnetic field, the model can be fitted to the measured data with agreement within 17\%. However, we find that the random alignment of particles relative to the magnetic field plays a role, reducing $\chi_{eff}$ by a factor of 3 in some cases, which is not accounted for in models yet. While suspensions are predicted to have $\chi_{eff}$ that approach the particle material susceptibility in the limit of large particle aspect ratio, instead we find a much smaller particle aspect ratio where $\chi_{eff}$ is maximized. A prediction that $\chi_{eff}$ approaches the bulk material susceptibility in the limit of the packing fraction of the liquid-solid transition also fails. We find $\chi_{eff}$ no larger than about 4 for suspensions of iron particles.

cond-mat.soft↗

arXiv2016

Giant deviation of a relaxation time from generalized Newtonian theory in Discontinuous Shear Thickening suspensions

We investigated the transient relaxation of a Discontinuous Shear Thickening suspension of cornstarch in water. We performed 2 types of relaxation experiments starting from a steady shear in a parallel plate rheometer, followed by either stopping the top plate rotation and measuring the transient torque relaxation, or removing the torque on the plate and measuring the transient tool rotation. We found that at low weight fraction $\phi_{eff}<58.8\pm0.4\%$, the suspensions exhibited a relaxation behavior consistent with a generalized Newtonian fluid. However, for larger weight fraction $58.8\% < \phi_{eff} < 61.0\%$, near the liquid-solid transition $\phi_c=61.0\pm0.7\%$, we found relaxation behaviors different from the generalized Newtonian model. The relaxation time in this range scales with the inverse of the critical shear rate at the onset of shear thickening. In this range the relaxation time was the same in both stress and rate controlled experiments, rather than the viscosity calculated from the relaxation time which is expected to be intrinsic material parameter in the generalized Newtonian model. The discrepancy between the measured relaxation times and the generalized Newtonian prediction was found to be up to $10^4$, and extrapolations diverge in the limit of $\phi_c$ as the generalized Newtonian prediction approaches 0. At the highest weight fractions, the relaxation time scales were measured to be on the order of $\sim 1$ s. The fact that this timescale is resolvable by the naked eye may be important to understanding some of the dynamic phenomenon commonly observed in these systems. We also showed that using the critical shear rate $\dot\gamma_c$ at the onset of shear thickening to characterize the effective weight fraction can more precisely characterize material properties near the critical point $\phi_c$, allowing us to resolve this transition so close to $\phi_c$.

physics.flu-dyn↗

arXiv2015

Development of magnetic liquid metal suspensions for magnetohydrodynamics

A new class of materials is developed that is a liquid with both high conductivity and magnetic susceptibility for magnetohydrodynamic (MHD) applications. We develop a general method for making such suspensions and demonstrate that various magnetic and non-magnetic metal particles, from 40 nm - 500 microns in diameter, can be suspended in liquid gallium and its alloys. The method uses an acid solution to prevent oxidation of the liquid metal and metallic particles, which allows wetting and thus suspending. We can increase the magnetic permeability by a factor of 5.0 by controlling the packing fraction of magnetic particles, which gives these materials the potential to exhibit strong MHD effects on the laboratory scale that are usually only observable in the cores of planets and stars. We can independently tune the viscosity by a factor of 230 by adding non-magnetic particles, which would allow independent control of MHD effects from turbulence.

cond-mat.mtrl-sci↗

arXiv2015

A low-dimensional model predicting geometry-dependent dynamics of large-scale coherent structures in turbulence

We test the ability of a general low-dimensional model for turbulence to predict geometry-dependent dynamics of large-scale coherent structures, such as convection rolls. The model consists of stochastic ordinary differential equations, which are derived as a function of boundary geometry from the Navier-Stokes equations (Brown and Ahlers 2008). We test the model using Rayleigh-B\'enard convection experiments in a cubic container. The model predicts a new mode in which the alignment of a convection roll switches between diagonals. We observe this mode with a measured switching rate within 30% of the prediction.

physics.flu-dyn↗

arXiv2015

Simulating the Dynamic Behavior of Shear Thickening Fluids

While significant research has been dedicated to the simulation of fluids, not much attention has been given to exploring new interesting behavior that can be generated with the different types of non-Newtonian fluids with non-constant viscosity. Going in this direction, this paper introduces a computational model for simulating the interesting phenomena observed in non-Newtonian shear thickening fluids, which are fluids where the viscosity increases with increased stress. These fluids have unique and unconventional behavior, and they often appear in real world scenarios such as when sinking in quicksand or when experimenting with popular cornstarch and water mixtures. While interesting behavior of shear thickening fluids can be easily observed in the real world, the most interesting phenomena of these fluids have not been simulated before in computer graphics. The fluid exhibits unique phase changes between solid and liquid states, great impact resistance in its solid state and strong hysteresis effects. Our proposed approach builds on existing non-Newtonian fluid models in computer graphics and introduces an efficient history-based stiffness term that is essential to produce the most interesting shear thickening phenomena. The history-based stiffness is formulated through the use of fractional derivatives, leveraging the fractional calculus ability to depict both the viscoelastic behavior and the history effects of history-dependent systems. Simulations produced by our method are compared against real experiments and the results demonstrate that the proposed model successfully captures key phenomena observed in shear thickening fluids.

cs.GR↗