arXiv subjects

Emmanuel Kymakis

Publications and source records attributed to Emmanuel Kymakis.

7 recordsLinked to original sources

arXiv2026

Graphene-based technologies for energy applications, challenges and perspectives

Here we report on technology developments implemented into the Graphene Flagship European project for the integration of graphene and graphene-related materials (GRMs) into energy application devices. Many of the technologies investigated so far aim at producing composite materials associating graphene or GRMs with either metal or semiconducting nanocrystals or other carbon nanostructures (e.g., CNT, graphite). These composites can be used favourably as hydrogen storage materials or solar cell absorbers. They can also provide better performing electrodes for fuel cells, batteries, or supercapacitors. For photovoltaic (PV) electrodes, where thin layers and interface engineering are required, surface technologies are preferred. We are using conventional vacuum processes to integrate graphene as well as radically new approaches based on laser irradiation strategies. For each application, the potential of implemented technologies is then presented on the basis of selected experimental and modelling results. It is shown in particular how some of these technologies can maximize the benefit taken from GRM integration. The technical challenges still to be addressed are highlighted and perspectives derived from the running works emphasized.

cond-mat.mtrl-sci↗

arXiv2025

Bandgap Engineering for Efficient Perovskite Solar Cells Under Multiple Color Temperature Indoor Lighting

Perovskite indoor photovoltaics (PIPVs) are emerging as a transformative technology for low-light intensity energy harvesting, owing to their high power conversion efficiencies (PCEs), low-cost fabrication, solution-processability, and compositionally tunable band gaps. In this work, methylammonium-free perovskite absorbers were compositionally engineered to achieve band gaps of 1.55, 1.72, and 1.88 eV, enabling matching the spectral photoresponse with the indoor lighting. Devices based on a scalable mesoscopic n-i-p architecture were systematically evaluated under white LED illumination across correlated color temperatures (3000-5500 K) and light intensities from 250 to 1000 lux with active area of 1 cm2. The 1.72 eV composition exhibited the most promising performance across different light intensities and colors, achieving PCEs of 35.04 % at 1000 lux and 36.6 % at 250 lux, with a stable device operation of over 2000 hours. On the other hand, the 1.88 eV band-gap variant reached a peak PCE of 37.4 % under 250 lux (5500 K), however performance trade-offs were observed across the different color lights LEDs. Our combined experimental and theoretical optical-electrical simulations suggest that decreasing trap-assisted recombination in wide-bandgap compositions may further improve PIPV performance across the different illumination conditions. In contrast, devices with 1.55 eV band gap underperformed in such conditions due to suboptimal spectral overlap and utilization. These findings establish bandgap optimization and device architecture as key design principles for high-efficiency, stable PIPVs, advancing their integration into self-powered electronic systems and innovative indoor environments.

cond-mat.mtrl-sci↗

arXiv2020

Improved Charge Carrier Dynamics of CH$_3$NH$_3$PbI$_3$ Perovskite Films Synthesized by Means of Laser-Assisted Crystallization

Although it has been recently demonstrated that the laser-assisted (LA) crystallization process leads to the formation of perovskite absorber films of superior photovoltaic performance compared to conventional thermal annealing (TA), the physical origin behind this important discovery is missing. In this study, CH$_3$NH$_3$PbI$_3$ perovskite thin films have been synthesized by means of LA and TA crystallization on the surface of two hole transport layers (HTL) namely poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and poly(triarylamine) (PTAA). A systematic study of the effect of laser irradiation conditions on the crystalline quality and morphology of the perovskite films was performed via scanning electron microscopy, X-Ray diffraction and absorption spectroscopy. Meanwhile, time-resolved transient absorption spectroscopy under inert atmosphere conditions was used to evaluate the carrier transport dynamics. It is found that for the PEDOT:PSS/CH$_3$NH$_3$PbI$_3$, structures the LA process resulted to perovskite layers of larger grains, faster charge carrier extraction properties and slower bimolecular recombination, when compared to TA. On the contrary, the LA-assisted formation of the PTAA/CH$_3$NH$_3$PbI$_3$ heterostructures leads to extensive presence of residual PbI$_2$ and thus inferior performance and charge carrier dynamics.

physics.app-ph↗

arXiv2020

In-Situ Monitoring of the Charge Carrier Dynamics of CH$_3$NH$_3$PbI$_3$ Perovskite Crystallization Process

Although methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$) perovskite has attracted enormous scientific attention over the last decade or so, important information on the charge extraction dynamics and recombination processes in perovskite devices is still missing. Herein we present a novel approach to evaluate the quality of CH$_3$NH$_3$PbI$_3$ layers, via in-situ monitoring of the perovskite layer charge carrier dynamics during the thermal annealing crystallization process, by means of time-resolved femtosecond transient absorption spectroscopy (TAS). In particular, CH$_3$NH$_3$PbI$_3$ films were deposited on two types of polymeric hole transport layers (HTL), poly(3,4-ethylenedioxythiophene)-poly-(styrenesulfonate) (PEDOT:PSS) and poly-(triarylamine) (PTAA), that are known to provide different carrier transport characteristics in perovskite solar cells. In order to monitor the evolution of the perovskite charge carrier dynamics during the crystallization process, the so-formed CH$_3$NH$_3$PbI$_3$/HTL architectures were studied in-situ by TAS at three different annealing temperatures, i.e. 90, 100 and 110 oC. It is revealed that the annealing time period required in order to achieve the optimum perovskite film quality in terms of the decay dynamics strongly depends on the annealing temperature, as well as, on the employed HTL. For both HTLs, the required period decreases as higher annealing temperature is used, while, for the more hydrophobic PTAA polymer, longer annealing periods were required in order to obtain the optimum charge carrier dynamics. The correlation of the TAS finding with the structural and morphological features of the perovskite films is analysed and provides useful insights on the charge extraction dynamics and recombination processes in perovskite optoelectronic devices.

physics.app-ph↗

arXiv2019

Efficient and environmental-friendly perovskite solar cells via embedding plasmonic nanoparticles: an optical simulation study on realistic device architecture

Solution-processed, lead halide-based perovskite solar cells have overcome important challenges over the recent years, offering low-cost and high solar power conversion efficiencies. However, they still undergo unoptimized light collection due mainly to the thin (~350 nm) polycrystalline absorber layers. Moreover, their high toxicity (due to the presence of lead in the perovskite crystalline structure) makes it necessary that the thickness of the absorber layers to be further reduced, for their future commercialization, without reducing the device performance. Here we aim to address these issues via embedding spherical plasmonic nanoparticles of various sizes, composition, concentrations, and vertical positions, for the first time in realistic halide-based perovskite solar cells architecture, and to clarify their effect on the absorption properties and enhancement. We theoretically show that plasmon-enhanced near-field effects and scattering leads to a device photocurrent enhancement of up to ~7.3% when silver spheres are embedded inside the perovskite layer. Interestingly, the combination of silver spheres in perovskite and aluminum spheres inside the hole transporting layer (PEDOT:PSS) of the solar cell leads to an even further enhancement, of up to ~12%. This approach allows the employment of much thinner perovskite layers in PSCs (up to 150 nm) to reach the same photocurrent as the nanoparticles-free device and reducing thus significantly the toxicity of the device. Providing the requirements related to the size, shape, position, composition, and concentration of nanoparticles for the PSCs photocurrent enhancement, our study establishes guidelines for a future development of highly-efficient, environmentally friendly and low-cost plasmonic perovskite solar cells.

physics.app-ph↗

arXiv2018

Effect of the reduction process on the field emission performance of reduced graphene oxide cathodes

The electron field emission (FE) properties of reduced graphene oxide (rGO) cathodes produced by three different reduction methods were assessed and compared. In particular, chemical reduction techniques, using either NaOH or KOH as reducing agents, were compared with thermal reduction (TR) methods. Xray photoelectron spectroscopy (XPS) measurements revealed that different reduction techniques led to different GO lattice parameters. Furthermore, the work function measured with ultraviolet photoelectron spectroscopy (UPS) varied among the samples giving rise to different electron emission characteristics. In particular, the cathodes prepared by the TR method presented the best FE performance, showing a turnon field of as low as ca. 1.8 V mm^-1 and a field enhancement factor of ca. 1300, which was very close however to that shown by the NaOH-reduced sheets. The worst FE properties were exhibited by the KOH-reduced nanosheets. In light of the above results, the role of the different reduction techniques as well as the final rGO lattice characteristics with regards to the emission performance are evaluated and discussed.

cond-mat.mtrl-sci↗

arXiv2012

Flexible Organic Photovoltaic Cells with In-situ Non-thermal Photoreduction of Spin Coated Graphene Oxide Electrodes

This article is withdrawn since it is published in a journal We report on the first reduction methodology, compatible with flexible, temperature sensitive substrates, for the production of reduced spin coated graphene oxide (GO) electrodes. It is based on the use of a laser beam for the in-situ, non-thermal, reduction of spin coated GO films on flexible substrates over a large area. The photoreduction process is one-step, facile and is rapidly carried out at room temperature in air without affecting the integrity of the graphene lattice as well as the flexibility of the underlying substrate. Conductive graphene films with a sheet resistance of as low as 700 Ω/sq can be obtained, much higher than flexible layers reduced by chemical means. As a proof of concept of our technique, the laser-reduced GO (LrGO) films were utilized as the transparent electrode in flexible, bulk heterojunction, organic photovoltaic (OPV) devices, replacing the traditional ITO. The devices displayed a power-conversion efficiency of 1.1 %, which is the highest reported so far for OPV device incorporating reduced GO as the transparent electrode. The in-situ non-thermal photoreduction of spin-coated GO films creates a new way to produce flexible functional graphene electrodes for a variety of electronic applications in a process that carries substantial promise for potential industrial implementation.

cond-mat.mtrl-sci↗