arXiv Science⌕ Search

arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 109 records · Page 6Linked to original sources

Accelerating Energy-Efficient Federated Learning in Cell-Free Networks with Adaptive Quantization

Federated Learning (FL) enables clients to share learning parameters instead of local data, reducing communication overhead. Traditional wireless networks face latency challenges with FL. In contrast, Cell-Free Massive MIMO (CFmMIMO) can serve multiple clients on shared resources, boosting spectral efficiency and reducing latency for large-scale FL. However, clients' communication resource limitations can hinder the completion of the FL training. To address this challenge, we propose an energy-efficient, low-latency FL framework featuring optimized uplink power allocation for seamless client-server collaboration. Our framework employs an adaptive quantization scheme, dynamically adjusting bit allocation for local gradient updates to reduce communication costs. We formulate a joint optimization problem covering FL model updates, local iterations, and power allocation, solved using sequential quadratic programming (SQP) to balance energy and latency. Additionally, clients use the AdaDelta method for local FL model updates, enhancing local model convergence compared to standard SGD, and we provide a comprehensive analysis of FL convergence with AdaDelta local updates. Numerical results show that, within the same energy and latency budgets, our power allocation scheme outperforms the Dinkelbach and max-sum rate methods by increasing the test accuracy up to $7$\% and $19$\%, respectively. Moreover, for the three power allocation methods, our proposed quantization scheme outperforms AQUILA and LAQ by increasing test accuracy by up to $36$\% and $35$\%, respectively.

cs.LG↗

Exploiting Mutual Coupling Characteristics for Channel Estimation in Holographic MIMO

Holographic multiple-input multiple-output (MIMO) systems represent a spatially constrained MIMO architecture with a massive number of antennas with small antenna spacing as a close approximation of a spatially continuous electromagnetic aperture. Accurate channel modeling is essential for realizing the full potential of this technology. In this paper, we investigate the impact of mutual coupling and spatial channel correlation on the estimation precision in holographic MIMO systems, as well as the importance of knowing their characteristics. We demonstrate that neglecting mutual coupling can lead to significant performance degradation for the minimum mean squared error estimator, emphasizing its critical consideration when designing estimation algorithms. Conversely, the least-squares estimator is resilient to mutual coupling but only yields good performance in high signal-to-noise ratio regimes. Our findings provide insights into how to design efficient estimation algorithms in holographic MIMO systems, aiding its practical implementation.

eess.SP↗

Adaptive Quantization Resolution and Power Control for Federated Learning over Cell-free Networks

Federated learning (FL) is a distributed learning framework where users train a global model by exchanging local model updates with a server instead of raw datasets, preserving data privacy and reducing communication overhead. However, the latency grows with the number of users and the model size, impeding the successful FL over traditional wireless networks with orthogonal access. Cell-free massive multiple-input multipleoutput (CFmMIMO) is a promising solution to serve numerous users on the same time/frequency resource with similar rates. This architecture greatly reduces uplink latency through spatial multiplexing but does not take application characteristics into account. In this paper, we co-optimize the physical layer with the FL application to mitigate the straggler effect. We introduce a novel adaptive mixed-resolution quantization scheme of the local gradient vector updates, where only the most essential entries are given high resolution. Thereafter, we propose a dynamic uplink power control scheme to manage the varying user rates and mitigate the straggler effect. The numerical results demonstrate that the proposed method achieves test accuracy comparable to classic FL while reducing communication overhead by at least 93% on the CIFAR-10, CIFAR-100, and Fashion-MNIST datasets. We compare our methods against AQUILA, Top-q, and LAQ, using the max-sum rate and Dinkelbach power control schemes. Our approach reduces the communication overhead by 75% and achieves 10% higher test accuracy than these benchmarks within a constrained total latency budget.

cs.LG↗

Achieving Beamfocusing via Two Separated Uniform Linear Arrays

This paper investigates coordinated beamforming using a modular linear array (MLA), composed of a pair of physically separated uniform linear arrays (ULAs), treated as sub-arrays. We focus on how such setups can give rise to near-field effects in 6G networks without requiring many antennas. Unlike conventional far-field beamforming, near-field beamforming enables simultaneous data service to multiple users at different distances in the same angular direction, offering significant multiplexing gains. We present a detailed analysis, including analytical expressions of the beamwidth and beamdepth for the MLA. Our findings reveal that using the MLA approach, we can remove approximately 36% of the antennas in the ULA while achieving the same level of beamfocusing.

eess.SP↗

Reconfigurable Intelligent Surfaces in Upper Mid-Band 6G Networks: Gain or Pain?

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most studied topics in recent years, hailed as a transformative technology with the potential to revolutionize future wireless systems. While RISs are recognized for their ability to enhance spectral efficiency, coverage, and the reliability of wireless channels, several challenges remain. Notably, convincing and profitable use cases must be developed before widespread commercial deployment can be realized. The first sixth-generation (6G) networks will most likely utilize upper mid-band frequencies (i.e., 7-24\,GHz). This is regarded as the \textit{golden band} since it combines good coverage, much new spectrum, and enables many antennas in compact form factors. There has been much prior work on channel modeling, coexistence, and possible implementation scenarios for these bands. There are significant frequency-specific challenges related to RIS deployment, use cases, number of required elements, channel estimation, and control. These are previously unaddressed for the upper mid-band. In this paper, we aim to bridge this gap by exploring various use cases, including RIS-assisted fixed wireless access (FWA), enhanced capacity in mobile communications, and increased reliability at the cell edge. We identify the conditions under which RIS can provide major benefits and optimal strategies for deploying RIS to enhance the performance of 6G upper mid-band communication systems.

cs.NI↗

Energy-Efficient Cell-Free Massive MIMO with Wireless Fronthaul

Cell-free massive MIMO improves the fairness among the user equipments (UEs) in the network by distributing many cooperating access points (APs) around the region while connecting them to a centralized cloud-computing unit that coordinates joint transmission/reception. However, the fiber cable deployment for the fronthaul transport network and activating all available antennas at each AP lead to increased deployment cost and power consumption for fronthaul signaling and processing. To overcome these challenges, in this work, we consider wireless fronthaul connections and propose a joint antenna activation and power allocation algorithm to minimize the end-to-end (from radio to cloud) power while satisfying the quality-of-service requirements of the UEs under wireless fronthaul capacity limitations. The results demonstrate that the proposed methodology of deactivating antennas at each AP reduces the power consumption by 50% and 84% compared to the benchmarks based on shutting down APs and minimizing only the transmit power, respectively.

eess.SP↗

Optimal Dual-Polarized Planar Arrays for Massive Capacity Over Point-to-Point MIMO Channels

Future wireless networks must provide ever higher data rates. The available bandwidth increases roughly linearly as we increase the carrier frequency, but the range shrinks drastically. This paper explores if we can instead reach massive capacities using spatial multiplexing over multiple-input multiple-output (MIMO) channels. In line-of-sight (LOS) scenarios, therank of the MIMO channel matrix depends on the polarization and antenna arrangement. We optimize the rank and condition number by identifying the optimal antenna spacing in dual-polarized planar antenna arrays with imperfect isolation. The result is sparely spaced antenna arrays that exploit radiative near-field properties. We further optimize the array geometry for minimum aperture length and aperture area, which leads to different configurations. Moreover, we prove analytically that for fixed-sized arrays, the MIMO rank grows quadratically with the carrier frequency in LOS scenarios, if the antennas are appropriately designed. Hence, MIMO technology contributes more to the capacity growth than the bandwidth. The numerical results show that massive data rates, far beyond 1 Tbps, can be reached both over fixed point-to-point links. It is also possible for a large base station to serve a practically-sized mobile device.

eess.SP↗

On Broad-Beam Reflection for Dual-Polarized RIS-Assisted MIMO Systems

The use of a reconfigurable intelligent surface (RIS) for aiding user-specific transmission has been widely explored. However, little attention has been devoted to utilizing RIS for assisting cell-specific transmission, where the RIS needs to reflect signals in a broad angular range. Furthermore, although modern communication systems operate in two polarizations, the majority of the works on RIS consider a uni-polarized surface, only reflecting the signals in one polarization. To fill these gaps, we study a downlink broadcasting scenario where a base station (BS) sends a cell-specific signal to all the users residing at unknown locations with the assistance of a dual-polarized RIS. We utilize the duality between the auto-correlation function and power spectrum in the space/spatial frequency domain to design configurations for broad-beam reflection. We first consider a free-space line-of-sight BS-RIS channel and show that the RIS configuration matrices must form a Golay complementary array pair for broad-beam radiation. We also present how to form Golay complementary array pairs based on known Golay complementary sequence pairs. We then consider an arbitrary BS-RIS channel and propose an algorithm based on stochastic optimization to find RIS configurations that produce a practically broad beam by relaxing the requirement on uniform broadness. Numerical simulations are finally conducted to corroborate the analyses and evaluate the performance.

eess.SP↗

DNN based Two-stage Compensation Algorithm for THz Hybrid Beamforming with imperfect Hardware

Terahertz (THz) communication is envisioned as a key technology for 6G and beyond wireless systems owing to its multi-GHz bandwidth. To maintain the same aperture area and the same link budget as the lower frequencies, ultra-massive multi-input and multi-output (UM-MIMO) with hybrid beamforming is promising. Nevertheless, the hardware imperfections particularly at THz frequencies, can degrade spectral efficiency and lead to a high symbol error rate (SER), which is often overlooked yet imperative to address in practical THz communication systems. In this paper, the hybrid beamforming is investigated for THz UM-MIMO systems accounting for comprehensive hardware imperfections, including DAC and ADC quantization errors, in-phase and quadrature imbalance (IQ imbalance), phase noise, amplitude and phase error of imperfect phase shifters and power amplifier (PA) nonlinearity. Then, a two-stage hardware imperfection compensation algorithm is proposed. A deep neural network (DNN) is developed in the first stage to represent the combined hardware imperfections, while in the second stage, the digital precoder in the transmitter (Tx) or the combiner in the receiver (Rx) is designed using NN to effectively compensate for these imperfections. Furthermore, to balance the performance and network complexity, three slimming methods including pruning, parameter sharing, and removing parts of the network are proposed and combined to slim the DNN in the first stage. Numerical results show that the Tx compensation can perform better than the Rx compensation. Additionally, using the combined slimming methods can reduce parameters by 97.2% and running time by 39.2% while maintaining nearly the same performance in both uncoded and coded systems.

cs.IT↗

Intelligent Reflecting Surface vs. Decode-and-Forward: How Large Surfaces Are Needed to Beat Relaying?

The rate and energy efficiency of wireless channels can be improved by deploying software-controlled metasurfaces to reflect signals from the source to the destination, especially when the direct path is weak. While previous works mainly optimized the reflections, this letter compares the new technology with classic decode-and-forward (DF) relaying. The main observation is that very high rates and/or large metasurfaces are needed to outperform DF relaying, both in terms of minimizing the total transmit power and maximizing the energy efficiency, which also includes the dissipation in the transceiver hardware.

cs.IT↗

Analysis of Quantization Noise Suppression Gains in Digital Phased Arrays

Digital phased arrays have often been disregarded for millimeter-wave communications since the analog-to-digital converters (ADCs) are power-hungry. In this paper, we provide a different perspective on this matter by demonstrating analytically and numerically how the ADC resolution can be reduced when using digital phased arrays. We perform a theoretical analysis of the quantization noise characteristics for an OFDM signal received and processed by a digital phased array, using Gaussian approximation of the OFDM signal. In particular, we quantify the quantization noise suppression factor analytically and numerically. This factor describes how much the coherent combining reduces the quantization noise as a function of the number of antennas, which allows for reducing the ADC bit resolution. For instance in a 8-16 antenna digital phased array the ADC resolution can be reduced with 1-2 bits compared to the ADC required for an analog phased array.

cs.IT↗

Efficient Channel Estimation With Shorter Pilots in RIS-Aided Communications: Using Array Geometries and Interference Statistics

Accurate estimation of the cascaded channel from a user equipment (UE) to a base station (BS) via each reconfigurable intelligent surface (RIS) element is critical to realizing the full potential of the RIS's ability to control the overall channel. The number of parameters to be estimated is equal to the number of RIS elements, requiring an equal number of pilots unless an underlying structure can be identified. In this paper, we show how the spatial correlation inherent in the different RIS channels provides this desired structure. We first optimize the RIS phase-shift pattern using a much-reduced pilot length (determined by the rank of the spatial correlation matrices) to minimize the mean square error (MSE) in the channel estimation under electromagnetic interference. In addition to considering the linear minimum MSE (LMMSE) channel estimator, we propose a novel channel estimator that requires only knowledge of the array geometry while not requiring any user-specific statistical information. We call this the reduced-subspace least squares (RS-LS) estimator and optimize the RIS phase-shift pattern for it. This novel estimator significantly outperforms the conventional LS estimator. For both the LMMSE and RS-LS estimators, the proposed optimized RIS configurations result in significant channel estimation improvements over the benchmarks.

eess.SP↗

Multi-Target Integrated Sensing and Communications in Massive MIMO Systems

Integrated sensing and communications (ISAC) allows networks to perform sensing alongside data transmission. While most ISAC studies focus on single-target, multi-user scenarios, multi-target sensing is scarcely researched. This letter examines the monostatic sensing performance of a multi-target massive MIMO system, aiming to minimize the sum of Cramér-Rao lower bounds (CRLBs) for target direction-of-arrival estimates while meeting user equipment (UE) rate requirements. We propose several precoding schemes, comparing sensing performance and complexity, and find that sensing-focused precoding with power allocation for communication achieves near-optimal performance with 20 times less complexity than joint precoding. Additionally, time-sharing between communication and sensing outperforms simple time division, highlighting the benefits of resource-sharing for ISAC.

eess.SP↗

Near-Field Localization and Sensing with Large-Aperture Arrays: From Signal Modeling to Processing

The signal processing community is currently witnessing a growing interest in near-field signal processing, driven by the trend towards the use of large aperture arrays with high spatial resolution in the fields of communication, localization, sensing, imaging, etc. From the perspective of localization and sensing, this trend breaks the basic far-field assumptions that have dominated the array signal processing research in the past, presenting new challenges and promising opportunities.

eess.SP↗

Point-to-Point MIMO Channel Estimation by Exploiting Array Geometry and Clustered Multipath Propagation

A large-scale MIMO (multiple-input multiple-output) system offers significant advantages in wireless communication, including potential spatial multiplexing and beamforming capabilities. However, channel estimation becomes challenging with multiple antennas at both the transmitter and receiver ends. The minimum mean-squared error (MMSE) estimator, for instance, requires a spatial correlation matrix whose dimensions scale with the square of the product of the number of antennas on the transmitter and receiver sides. This scaling presents a substantial challenge, particularly as antenna counts increase in line with current technological trends. Traditional MIMO literature offers alternative channel estimators that mitigate the need to fully acquire the spatial correlation matrix. In this paper, we revisit point-to-point MIMO channel estimation and introduce a reduced-subspace least squares (RS-LS) channel estimator designed to eliminate physically impossible channel dimensions inherent in uniform planar arrays. Additionally, we propose a cluster-aware RS-LS estimator that leverages both reduced and cluster-specific subspace properties, significantly enhancing performance over the conventional RS-LS approach. Notably, both proposed methods obviate the need for fully/partial knowledge of the spatial correlation matrix.

eess.SP↗

RIS-Assisted ISAC: Precoding and Phase-Shift Optimization for Mono-Static Target Detection

The reconfigurable intelligent surface (RIS) technology emerges as a highly useful component of the rapidly evolving integrated sensing and communications paradigm, primarily owing to its remarkable signal-to-noise ratio enhancement capabilities. In this paper, our focus is on mono-static target detection while considering the communication requirement of a user equipment. Both sensing and communication benefit from the presence of an RIS, which makes the channels richer and stronger. Diverging from prior research, we comprehensively examine three target echo paths: the direct (static) channel path, the path via the RIS, and a combination of these, each characterized by distinct radar cross sections (RCSs). We take both the line-of-sight (LOS) and the non-line-of-sight (NLOS) paths into account under a clutter for which the distribution is not known, but the low-rank subspace it resides. We derive the generalized likelihood ratio test (GLRT) detector and introduce a novel approach for jointly optimizing the configuration of RIS phase-shifts and precoding. Our simulation results underscore the paramount importance of this combined design in terms of enhancing detection probability. Moreover, it becomes evident that the derived clutter-aware target detection significantly enhances detection performance, especially when the clutter is strong.

eess.SP↗

Spatial Correlation Modeling and RS-LS Estimation of Near-Field Channels with Uniform Planar Arrays

Extremely large aperture arrays (ELAAs) can offer massive spatial multiplexing gains in the radiative near-field region in beyond 5G systems. While near-field channel modeling for uniform linear arrays has been extensively explored in the literature, uniform planar arrays-despite their advantageous form factor-have been somewhat neglected due to their more complex nature. Spatial correlation is crucial for non-line-of-sight channel modeling. Unlike far-field scenarios, the spatial correlation properties of near-field channels have not been thoroughly investigated. In this paper, we start from the fundamentals and develop a near-field spatial correlation model for arbitrary spatial scattering functions. Furthermore, we derive the lower dimensional subspace where the channel vectors can exist. It is based on prior knowledge of the three-dimensional coverage region where scattering clusters exists and we derive a tractable one-dimensional integral expression. This subspace is subsequently employed in a reduced-subspace least squares (RS-LS) estimation method for near-field channels, thereby enhancing performance over the traditional least squares estimator without the need for having full spatial correlation matrix knowledge.

eess.SP↗

User-Centric Cell-Free Massive MIMO With RIS-Integrated Antenna Arrays

Cell-free massive MIMO (multiple-input multiple-output) is a promising network architecture for beyond 5G systems, which can particularly offer more uniform data rates across the coverage area. Recent works have shown how reconfigurable intelligent surfaces (RISs) can be used as relays in cell-free massive MIMO networks to improve data rates further. In this paper, we analyze an alternative architecture where an RIS is integrated into the antenna array at each access point and acts as an intelligent transmitting surface to expand the aperture area. This approach alleviates the multiplicative fading effect that normally makes RIS-aided systems inefficient and offers a cost-effective alternative to building large antenna arrays. We use a small number of antennas and a larger number of controllable RIS elements to match the performance of an antenna array whose size matches that of the RIS. In this paper, we explore this innovative transceiver architecture in the uplink of a cell-free massive MIMO system for the first time, demonstrating its potential benefits through analytic and numerical contributions. The simulation results validate the effectiveness of our proposed phase-shift configuration and highlight scenarios where the proposed architecture significantly enhances data rates.

eess.SP↗