arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 253 records · Page 14Linked to original sources

arXiv2020

Impact of Backward Crosstalk in 2x2 MIMO Transmitters on NMSE and Spectral Efficiency

We consider backward crosstalk in 2 x 2 transmitters, which is caused by crosstalk from the outputs of the transmitter to the inputs or by the combination of output crosstalk and impedance mismatch. We analyze its impact via feedback networks together with third-order power amplifier non-linearities. We utilize the Bussgang decomposition to express the distorted output signals of the transmitter as a linear transformation of the input plus uncorrelated distortion. The normalized mean-square errors (NMSEs) between the distorted and desired amplified signals are expressed analytically and the optimal closed-form power back-off that minimizes the worst NMSE of the two branches is derived. In the second part of the paper, an achievable spectral efficiency (SE) is presented for the communication from this ``dirty'' transmitter to another single-antenna receiver. The SE-maximizing precoder is optimally found by exploiting the hardware characteristics. Furthermore, the optimal power back-off is analyzed for two sub-optimal precoders, which either do not exploit any hardware knowledge or only partial knowledge. The simulation results show that the performance of these sub-optimal precoders is close-to-optimal. We also discuss how the analysis in this paper can be extended to transmitters with an arbitrary number of antenna branches.

eess.SP↗

arXiv2020

The Bussgang Decomposition of Non-Linear Systems: Basic Theory and MIMO Extensions

Many of the systems that appear in various signal processing applications are non-linear, for example, due to hardware impairments such as non-linear amplifiers and finite-resolution quantization. The Bussgang decomposition is a popular tool for analyzing the performance of systems that involve such non-linear components. In a nutshell, the decomposition provides an exact probabilistic relationship between the output and the input of a non-linearity: the output is equal to a scaled version of the input plus uncorrelated distortion. The decomposition can either be used to compute exact performance results or lower bounds where the uncorrelated distortion is treated as independent noise. This lecture note explains the basic theory, provides key examples, extends the theory to complex-valued vector signals, and clarifies some potential misconceptions.

eess.SP↗

arXiv2020

Local Partial Zero-Forcing Precoding for Cell-Free Massive MIMO

Cell-free Massive MIMO (multiple-input multiple-output) is a promising distributed network architecture for 5G-and-beyond systems. It guarantees ubiquitous coverage at high spectral efficiency (SE) by leveraging signal co-processing at multiple access points (APs), aggressive spatial user multiplexing and extraordinary macro-diversity gain. In this study, we propose two distributed precoding schemes, referred to as \textit{local partial zero-forcing} (PZF) and \textit{local protective partial zero-forcing} (PPZF), that further improve the spectral efficiency by providing an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-hauling overhead, and implementable by APs with very few antennas. We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. PZF and PPZF can substantially outperform maximum ratio transmission and zero-forcing, and their performance is comparable to that achieved by regularized zero-forcing (RZF), which is a benchmark in the downlink. Importantly, these closed-form expressions can be employed to devise optimal (long-term) power control strategies that are also suitable for RZF, whose closed-form expression for the SE is not available.

cs.IT↗

arXiv2020

Prospective Multiple Antenna Technologies for Beyond 5G

Multiple antenna technologies have attracted large research interest for several decades and have gradually made their way into mainstream communication systems. Two main benefits are adaptive beamforming gains and spatial multiplexing, leading to high data rates per user and per cell, especially when large antenna arrays are used. Now that multiple antenna technology has become a key component of the fifth-generation (5G) networks, it is time for the research community to look for new multiple antenna applications to meet the immensely higher data rate, reliability, and traffic demands in the beyond 5G era. We need radically new approaches to achieve orders-of-magnitude improvements in these metrics and this will be connected to large technical challenges, many of which are yet to be identified. In this survey paper, we present a survey of three new multiple antenna related research directions that might play a key role in beyond 5G networks: Cell-free massive multiple-input multiple-output (MIMO), beamspace massive MIMO, and intelligent reflecting surfaces. More specifically, the fundamental motivation and key characteristics of these new technologies are introduced. Recent technical progress is also presented. Finally, we provide a list of other prospective future research directions.

cs.IT↗

arXiv2020

Cell-Free Massive MIMO With Radio Stripes and Sequential Uplink Processing

Cell-free Massive MIMO (mMIMO) is envisaged to be a next-generation technology beyond 5G with its high spectral efficiency and superior spatial diversity as compared to that of conventional MIMO technology. The main principle is that many distributed access points (APs) cooperate to simultaneously serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture. We propose a novel sequential processing algorithm with normalized linear minimum mean square error (N-LMMSE) combining at every. This algorithm enables interference suppression in cell-free MMO while keeping the cost and front-haul requirements low. The spectral efficiency of the proposed algorithm is computed and analyzed. We conclude that it provides an attractive trade-off between low front-haul requirements and high spectral efficiency.

cs.IT↗

arXiv2020

Jamming-Robust Uplink Transmission for Spatially Correlated Massive MIMO Systems

In this paper, we consider how the uplink transmission of a spatially correlated massive multiple-input multiple-output (MIMO) system can be protected from a jamming attack. To suppress the jamming, we propose a novel framework including a new optimal linear estimator in the training phase and a bilinear equalizer in the data phase. The proposed estimator is optimal in the sense of maximizing the spectral efficiency of the legitimate system attacked by a jammer, and its implementation needs statistical knowledge about the jammer's channel. We derive an efficient algorithm to estimate the jamming information needed for the implementation of the proposed framework. Furthermore, we demonstrate that optimized power allocation at the legitimate users can improve the performance of the proposed framework regardless of the jamming power optimization. Our proposed framework can be exploited to combat jamming in scenarios with either ideal or non-ideal hardware at the legitimate users and the jammer. Numerical results reveal that using the proposed framework, the jammer cannot dramatically affect the performance of the legitimate system.

cs.IT↗

arXiv2020

Performance Analysis of Quantized Uplink Massive MIMO-OFDM With Oversampling Under Adjacent Channel Interference

Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resolution ADCs under frequency selective fading with orthogonal frequency division multiplexing in the perfect and imperfect receiver channel state information cases. We derive analytical expressions for the bit error rate and ergodic capacity. We show that the interfering band can be suppressed by increasing the number of antennas or the oversampling rate when a zero-forcing receiver is employed.

cs.IT↗

arXiv2020

Using Intelligent Reflecting Surfaces for Rank Improvement in MIMO Communications

An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a larger impact on the channel capacity: rank improvement. One of the classical bottlenecks of point-to-point MIMO communications is that the capacity gains provided by spatial multiplexing are only large at high SNR, and high SNR channels are mainly appearing in line-of-sight (LoS) scenarios where the channel matrix has low rank and therefore does not support spatial multiplexing. We demonstrate how an IRS can be used and optimized in such scenarios to increase the rank of the channel matrix, leading to substantial capacity gains.

eess.SP↗

arXiv2020

ADMM-Based One-Bit Quantized Signal Detection for Massive MIMO Systems with Hardware Impairments

This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based linear receivers by generalizing them for the considered hardware impairment model. We propose an optimization problem to estimate the uplink data signals by choosing a suitable cost function that treats the unquantized received signal at the base station as the variable. We exploit the additional structure of the one-bit quantization and signal modulation by including proper constraints. To solve the non-convex quadratically-constrained quadratic programming (QCQP) problem, we propose an ADMM-based algorithm with closed-form update equations. Then, we replace the harsh projectors in the updates with their soft versions to improve the detection performance. We show that the proposed ADMM-based algorithm outperforms the state-of-the-art linear receivers significantly in terms of bit error rate (BER) and the performance gain increases with the number of antennas and users.

eess.SP↗

arXiv2020

Large-Scale Fading Precoding for Maximizing the Product of SINRs

This paper considers the large-scale fading precoding design for mitigating the pilot contamination in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems. Rician fading with spatially correlated channels are considered where the line-of-sight (LOS) components of the channels are randomly phase-shifted in each coherence block. The large-scale fading precoding weights are designed based on maximizing the product of the signal-to-interference-plus-noise ratios (SINRs) of the users, which provides a good balance between max-min fairness and sum rate maximization. The spectral efficiency (SE) is derived based on the scaled least squares (LS) estimates of the channels, which only utilize the despreaded pilot signals without any matrix inversion. Simulation results show that the two-layer large-scale fading precoding improves the SE of almost all users compared to the conventional single-layer precoding.

cs.IT↗

arXiv2020

Max-Min Fair Wireless-Powered Cell-Free Massive MIMO for Uncorrelated Rician Fading Channels

This paper considers cell-free massive multiple-input multiple-output systems where the multiple-antenna access points (APs) assist the single-antenna user equipments (UEs) by wireless power transfer. The UEs utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the APs. We consider practical Rician fading with the line-of-sight components of the channels being phase-shifted in each coherence block. The uplink spectral efficiency (SE) is derived for this model and the max-min fairness problem is considered where the optimization variables are the AP and UE power control coefficients together with the large-scale fading decoding vectors. The objective is to maximize the minimum SE of the users under APs' and UEs' transmission power constraints. An alternating optimization algorithm is proposed for the solution of the highly-coupled non-convex problem.

cs.IT↗

arXiv2020

RadioWeaves for efficient connectivity: analysis andimpact of constraints in actual deployments

We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the environment. Technologically, RadioWeaves will deploy distributed arrays to create both favorable propagation and antenna array interaction. The technology leverages on the ideas of large-scale intelligent surfaces and cell-free wireless access. Offering close to the service connectivity and computing, new grades in energy efficiency,reliability, and low latency can be reached. The new concept moreover can be scaled up easily to offer a very high capacity inspecific areas demanding so. In this paper we anticipate how two different demanding use cases can be served well by a dedicated RadioWeaves deployment: a crowd scenario and a highly reflective factory environment. A practical approach towards a RadioWeaves prototype, integrating dispersed electronics invisibly in a room environment, is introduced. We outline diverse R\&D challenges that need to be addressed to realize the great potential of the RadioWeaves technology.

eess.SP↗

arXiv2020

Channel Estimation in Massive MIMO under Hardware Non-Linearities: Bayesian Methods versus Deep Learning

This paper considers the joint impact of non-linear hardware impairments at the base station (BS) and user equipments (UEs) on the uplink performance of single-cell massive MIMO (multiple-input multiple-output) in practical Rician fading environments. First, Bussgang decomposition-based effective channels and distortion characteristics are analytically derived and the spectral efficiency (SE) achieved by several receivers are explored for third-order non-linearities. Next, two deep feedforward neural networks are designed and trained to estimate the effective channels and the distortion variance at each BS antenna, which are used in signal detection. We compare the performance of the proposed methods with state-of-the-art distortion-aware and -unaware Bayesian linear minimum mean-squared error (LMMSE) estimators. The proposed deep learning approach improves the estimation quality by exploiting impairment characteristics, while LMMSE methods treat distortion as noise. Using the data generated by the derived effective channels for general order of non-linearities at both the BS and UEs, it is shown that the deep learning-based estimator provides better estimates of the effective channels also for non-linearities more than order three.

cs.IT↗

arXiv2019

Intelligent Reflecting Surfaces: Physics, Propagation, and Pathloss Modeling

Intelligent reflecting surfaces can improve the communication between a source and a destination. The surface contains metamaterial that is configured to "reflect" the incident wave from the source towards the destination. Two incompatible pathloss models have been used in prior work. In this letter, we derive the far-field pathloss using physical optics techniques and explain why the surface consists of many elements that individually act as diffuse scatterers but can jointly beamform the signal in a desired direction with a certain beamwidth. We disprove one of the previously conjectured pathloss models.

physics.app-ph↗

arXiv2019

Optimal Design of Energy-Efficient Cell-Free Massive MIMO: Joint Power Allocation and Load Balancing

A large-scale distributed antenna system that serves the users by coherent joint transmission is called Cell-free Massive MIMO (multiple input multiple output). For a given user set, only a subset of the access points (APs) is likely needed to satisfy the users' performance demands. To find a flexible and energy-efficient implementation, we minimize the total power consumption at the APs in the downlink, considering both the hardware and transmit powers, where APs can be turned off. Even though this is a non-convex optimization problem, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. We also propose a low-complexity algorithm that exploits group-sparsity in the problem formulation. Numerical results manifest that our optimization framework can greatly reduce the power consumption compared to keeping all APs turned on and only minimizing the transmit powers.

cs.IT↗

arXiv2019

Dynamic Resource Allocation in Co-Located and Cell-Free Massive MIMO

In this paper, we study joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with randomly arriving data traffic. We consider both co-located and Cell-Free (CF) Massive MIMO, where the difference lies in whether the antennas are co-located at the base station or spread over a wide network area. The data is generated at each user according to an individual stochastic process. Using Lyapunov optimization techniques, we develop a dynamic scheduling algorithm (DSA), which decides at each time slot the amount of data to admit to the transmission queues and the transmission rates over the wireless channel. The proposed algorithm optimizes the long-term user throughput under various fairness policies while keeping the transmission queues stable. Simulation results show that the state-of-the-art power control schemes developed for Massive MIMO with infinite backlogs can fail to stabilize the system even when the data arrival rates are within the network capacity region. Our proposed DSA shows advantage in providing finite delay with performance optimization whenever the network can be stabilized.

cs.IT↗

arXiv2019

Joint Unicast and Multi-group Multicast Transmission in Massive MIMO Systems

We study the joint unicast and multi-group multicast transmission in massive multiple-input-multiple-output (MIMO) systems. We consider a system model that accounts for channel estimation and pilot contamination, and derive achievable spectral efficiencies (SEs) for unicast and multicast user terminals (UTs), under maximum ratio transmission and zero-forcing precoding. For unicast transmission, our objective is to maximize the weighted sum SE of the unicast UTs, and for the multicast transmission, our objective is to maximize the minimum SE of the multicast UTs. These two objectives are coupled in a conflicting manner, due to their shared power resource. Therefore, we formulate a multiobjective optimization problem (MOOP) for the two conflicting objectives. We derive the Pareto boundary of the MOOP analytically. As each Pareto optimal point describes a particular efficient trade-off between the two objectives of the system, we determine the values of the system parameters (uplink training powers, downlink transmission powers, etc.) to achieve any desired Pareto optimal point. Moreover, we prove that the Pareto region is convex, hence the system should serve the unicast and multicast UTs at the same time-frequency resource. Finally, we validate our results using numerical simulations.

cs.IT↗

arXiv2019

Demystifying the Power Scaling Law of Intelligent Reflecting Surfaces and Metasurfaces

Intelligent reflecting surfaces (IRSs) have recently attracted the attention of communication theorists as a means to control the wireless propagation channel. It has been shown that the signal-to-noise ratio (SNR) of a single-user IRS-aided transmission increases as $N^2$, with $N$ being the number of passive reflecting elements in the IRS. This has been interpreted as a major potential advantage of using IRSs, instead of conventional Massive MIMO (mMIMO) whose SNR scales only linearly in $N$. This paper shows that this interpretation is incorrect. We first prove analytically that mMIMO always provides higher SNRs, and then show numerically that the gap is substantial; a very large number of reflecting elements is needed for an IRS to obtain SNRs comparable to mMIMO.

eess.SP↗