arXiv Science⌕ Search

arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 19 recordsLinked to original sources

How to Receive Focused Beams in Near-Field MIMO? Analytical Combiners and Array Size Optimization

This paper investigates receive combining for near-field beamfocusing in line-of-sight channels with antenna array misalignment. We propose and evaluate two analytical combiners: analog ANF-AC and digital ANF-DC. Beyond focusing the beam toward the transmitter, ANF-AC benefits from the proposed phase-flip corrections (PFCs), while ANF-DC additionally exploits Dirichlet-kernel-based amplitude tapering. ANF-AC closely matches theoretically optimal analog equal-gain combining (EGC), with an SNR gap below 0.006 dB. Similarly, ANF-DC matches optimal digital maximum-ratio combining (MRC). We then leverage the analytical properties of these combiners for link-level evaluation and optimization, deriving a closed-form expression for the optimal transmitter-receiver array-size trade-off that maximizes received SNR with analog combining. We also show that the optimized analog receiver performs within 0.84 dB of its fully digital MRC-equivalent counterpart. These results demonstrate that optimized analog combining (with potentially lower implementation complexity and cost, particularly at higher frequencies) can get close to the fully digital performance. Beyond the theoretical insights presented, the analytical tractability and EGC-like / MRC-like performance of our combiners enable accurate network-level mathematical studies of beamfocusing, such as coverage, capacity, and interference analysis and optimization toward efficient 6G+ near-field MIMO communication systems.

eess.SP↗

The Resurrection of Spectrum Spreading for 6G and Beyond: From Sinusoids to Chirps

Orthogonal frequency-division multiplexing (OFDM) and its sinusoidal subcarriers have underpinned the 4G and 5G eras, delivering high spectral efficiency and resilience to multipath fading through an efficient multicarrier architecture. However, as future systems move toward doubly dispersive environments driven by high-mobility applications and migration to mmWave/sub-THz bands, the time-invariance assumption underlying OFDM becomes increasingly difficult to maintain, and Doppler-induced degradation becomes prominent. While enhancements such as MIMO, advanced coding, and scheduling provide incremental remedies, they introduce additional overhead, because the sinusoidal subcarrier itself offers no inherent waveform-level robustness to Doppler impairments. Accordingly, two time-frequency spreading philosophies have emerged to improve Doppler resilience by distributing each symbol's energy across both dimensions of the time-frequency plane: (i) 2D isotropic spreading via the delay-Doppler (DD) domain, exemplified by the orthogonal time frequency space (OTFS) family, and (ii) sheared spreading via parameterizable chirps, exemplified by the affine frequency-division multiplexing (AFDM) family. In this article, we examine key considerations for future waveform design across these paradigms and argue that transitioning from the sinusoidal subcarriers of OFDM to the chirp-based subcarriers offers a viable design direction for improving Doppler robustness while retaining much of the mature OFDM infrastructure. This perspective also highlights the suitability of chirp-based waveforms for integrated sensing and communications (ISAC) and their extensibility to emerging physical-layer techniques. Overall, we argue that the transition from sinusoids to chirps is a technically motivated, compelling evolutionary direction for future wireless physical layer design.

eess.SP↗

Limitation of Bessel Beams in Near Field Communications: A Depth of Field Perspective

Bessel beams have recently been explored as a candidate complement to focused beams in radiative near-field communications due to their non-diffracting and self-healing properties. However, recent work has shown that the practically useful range of finite-aperture Bessel beams can occupy only a fraction of the radiative near-field region, establishing the existence of a finite propagation limit. In this paper, we establish such a limitation analytically from a depth-of-field perspective for Bessel beams generated by finite circular and square apertures. To quantify the Bessel beam depth, we first derive analytical expressions for the normalized array gain and use them to establish absolute and peak-normalized $3$-dB depth-of-field criteria. These criteria reveal critical cone-angle thresholds that partition the Bessel-beam configuration space into (i) undefined, (ii) finite, and (iii) infinite depth-of-field regimes. Our analysis further reveals that the maximum usable non-diffracting range under the proposed depth-of-field criterion is limited to $\approx22\%$ and $\approx19\%$ of the Fraunhofer distance for circular and square apertures, respectively. Numerical results confirm the accuracy of the derived limits for discrete planar arrays, providing practical engineering guidelines for the design of finite-aperture Bessel beams in future near-field communications.

eess.SP↗

Waveform Bandwidth and Frequency Diversity in FDA-MIMO Range-Angle Estimation: A CRLB Perspective

Frequency-diverse array multiple-input multiple-output (FDA-MIMO) radar introduces range-dependent phase diversity through element-dependent carrier-frequency offsets, in addition to the delay information carried by transmitted waveforms. This paper develops a bandwidth-aware Cramer-Rao lower bound (CRLB) framework to characterize how these two mechanisms jointly affect range-angle estimation. Starting from a Nyquist-rate sampled observation model that retains waveform delays and FDA frequency offsets, we derive an equivalent Fisher information matrix (EFIM) after eliminating an unknown quasi-static complex scattering coefficient as a nuisance parameter. We derive closed-form CRLB approximations that reveal the interplay between waveform root-mean-square (RMS) bandwidth and FDA frequency diversity. A three-factor decomposition of the squared normalized cross-information further characterizes range-angle coupling. Results show that when increased independently, both waveform RMS bandwidth and FDA frequency diversity reduce the range CRLB, but FDA frequency diversity increases the angle CRLB at fixed nonzero waveform bandwidth, whereas waveform RMS bandwidth reduces it. Additionally, under a fixed aggregate spectral budget, the range CRLB exhibits an interior maximum, whereas the angle CRLB increases monotonically with the FDA spectral-allocation fraction. Numerical results corroborate the closed-form approximations and the predicted trends.

eess.SP↗

Broadcasting in Centimeter-Wave Gigantic MIMO Systems: Beam Shaping is All You Need

Beamforming is a key enabling technology for centimeter-wave Gigantic MIMO (G-MIMO) systems, using antenna arrays to generate wide beams for cell-wide broadcasting or narrow beams for data transmission. This paper presents a novel \emph{beam shaping technology} for designing environment-aware broadcast beams (i.e., beams for common control information delivery, as in 5G SSB). As a case study, we shape a \emph{prostrate beam} in the vertical plane to approximate uniform electromagnetic power distribution across the ground, thereby enhancing broadcast coverage quality. We first propose a geometric broadcasting model that, through coordinate transformation, relates base station height, beam spread, maximum service distance, and downtilt angle. Building on this model and the signal propagation model, we formulate the beam shaping problem as a non-convex optimization problem that aims to maximize ground-level coverage. To solve it, we develop a generalized optimization framework. We reformulate the problem into a matrix representation, equivalently transforming it into a target pursuit optimization (TPO) problem. Using variable substitution, the objective is convexified into a quadratically constrained quadratic program, and the non-convex rank constraint is handled via successive convex approximation, decomposing the problem into iteratively solved subproblems. We provide complexity and convergence analyses for the proposed algorithm. Numerical simulations confirm that the optimization effectively shapes the intended beam pattern and that the proposed prostrate beam yields significant performance gains, including substantially extended coverage distance, over conventional wide-beam benchmarks.

cs.IT↗

Beamfocusing Versus Airy Beams: Does Antenna Blockage Require Beam Bending?

Airy beams are often proposed in array beamforming to bend beams around obstacles. We prove that, for a single-antenna receiver, conventional beamfocusing maximizes the received power regardless of how many antennas are blocked and, in expectation, even with phase errors in the channel state information. This also holds for multi-antenna receivers under a phase-separability condition that is satisfied in rank-one channels. Numerical results confirm that unmodified beamfocusing is optimal for physically small receivers (i.e., those that fit within the beamwidth) when an obstacle is present. For physically larger receivers, the optimal precoding deviates from beamfocusing to better illuminate the receiver's unobstructed parts, but will not become Airy beams. While Airy beams can be configured to perform well, their ability to follow a bent trajectory in front of an obstacle does not maximize the received power behind it.

eess.SP↗

Joint and Streamwise Distributed MIMO Satellite Communications with Multi-Antenna Ground Users

We consider a low Earth orbit downlink communication, where multiple satellites jointly serve multi-antenna ground users, transmitting multiple spatial streams per user. Using a line-of-sight-dominant satellite channel model with statistical channel state information, including angular information and large-scale fading, we study two distributed transmission modes with different fronthaul requirements. First, for joint transmission, where all satellites transmit all user streams, we formulate a sum spectral efficiency (SE) maximization problem under general convex power constraints and address the intractability of the exact ergodic SE expression by adopting a tractable approximation. Exploiting the equivalence between sum SE maximization and weighted sum mean square error minimization, we derive a novel iterative transceiver design. Second, to reduce fronthaul load, we propose streamwise transmission, where each stream is sent by a single satellite, and develop an eigenmode-based stream-satellite association using participation factors and a maximum-weight bipartite matching problem solved by the Hungarian algorithm. Numerical simulations evaluate the validity of the SE approximation, demonstrate conditions under which streamwise transmission performs nearly optimally or trades SE for lower overhead, highlight the impact of stream/user loading, and show substantial performance gains over conventional benchmarks.

eess.SP↗

On the Impact of Channel Aging and Doppler-Affected Clutter on OFDM ISAC Systems

The temporal evolution of the propagation environment plays a central role in integrated sensing and communication (ISAC) systems. A slow-time evolution manifests as channel aging in communication links, while a fast-time one is associated with non-zero Doppler clutter. Nevertheless, the joint impact of these two phenomena on ISAC performance has been largely overlooked. This paper addresses this research gap in a network utilizing orthogonal frequency division multiplexing waveforms. Here, a base station simultaneously serves a user equipment (UE) device and performs monostatic sensing. Channel aging is captured through an autoregressive model with exponential correlation decay. Clutter is modeled as a collection of uncorrelated, coherent patches with non-zero Doppler, resulting in a Kronecker-separable covariance structure. We propose an aging-aware channel estimator that uses prior pilot observations to estimate the time-varying UE channel, characterized by a non-isotropic multipath fading structure. The clutter's structure enables a novel low-complexity pre-detection radar processing pipeline: clutter statistics are estimated from raw data and subsequently used to suppress the clutter's action, after which range-angle and range-velocity maps are computed. We evaluate the influence of frame length and pilot history on channel estimation accuracy and demonstrate substantial performance gains over block fading in low-to-moderate mobility regimes. The sensing pipeline is implemented in a clutter-dominated environment, demonstrating that effective clutter suppression can be achieved under practical configurations. We analyze the robustness of our proposed pipeline against non-separable clutter by introducing a controllable degree of non-separability. Our results highlight the benefit of sensing streams and that our pipeline can withstand a moderate degree of non-separability.

eess.SP↗

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

cs.IT↗

Exploiting Pilot Contamination to Improve UL Sum Rate under Maximum Ratio Combining

In this work, we show that pilot contamination can be exploited to jointly increase the uplink sum rate and reduce pilot overhead. By leveraging the effect of pilot contamination on minimum mean-square-error (MMSE) channel estimates, we demonstrate that allowing users to share or use correlated pilots can, in certain regimes, yield better sum rate than with mutually orthogonal pilots or perfect channel state information (CSI) under maximum-ratio (MR) combining. To establish this result, we derive the use-and-then-forget (UATF) capacity bound for an arbitrary pilot design under correlated Rayleigh fading with MR combining. We show that, in the presence of pilot contamination, the key mechanism is the directional suppression of the channel estimate towards nearby interfering angular regions, enabling interference reduction. Numerical results confirm this behavior, demonstrating the sum-rate gain and showing that it grows with the number of antennas.

eess.SP↗

Mask-Compliant Clipping-Aware Precoding for Multi-User MIMO-OFDM Systems

Orthogonal frequency-division multiplexing (OFDM) is widely adopted in frequency-selective channels for its ability to simplify equalization, yet it also causes large signal peaks, out-of-band (OOB) emissions, and spectral leakage. We study downlink precoding/combining for multi-user multiple-input multiple-output (MU-MIMO)--OFDM systems by minimizing the sum of the users' mean-squared errors (MSEs) under per-subcarrier transmit-power limits, per-antenna OOB spectral-mask constraints, and per-antenna peak-amplitude (clipping) constraints, which confine the emitted spectrum and limit waveform peaks to reduce power-amplifier saturation, nonlinear distortion, and spectral regrowth. The resulting nonconvex problem is handled by a minimum mean-squared error (MMSE) based block coordinate descent (BCD), with a closed-form combiner update and an alternating direction method of multipliers (ADMM) algorithm with closed-form updates for the precoder subproblem. Simulations show clear gains over well-known benchmark schemes.

eess.SP↗

Joint Access and Fronthaul Resource Allocation for Cell-Free Massive MIMO with Wireless Fronthaul

Wireless fronthaul is a key enabler of flexible and scalable cell-free massive MIMO systems, but its limited capacity poses significant challenges for maintaining high and uniform user performance. In this work, we analyze the performance of a cell-free massive MIMO network with wireless fronthaul under realistic low physical layer functional splits. We propose a joint access and fronthaul resource allocation algorithm that maximizes the minimum user equipment (UE) spectral efficiency while satisfying fronthaul load constraints. Our analysis reveals that power allocation over the wireless fronthaul follows a modified water-filling structure, where the water level is jointly determined by the access and fronthaul channel gains. Furthermore, we show that severe fronthaul limitations not only reduce UE rates but also introduce spatial performance disparities depending on the cloud location. Finally, we demonstrate that split option 8 is impractical under wireless fronthaul constraints, underscoring the importance of dynamic fronthaul bit allocation to reduce fronthaul load and enable efficient system operation.

eess.SP↗

Energy-Efficient Dual-Band Communication: How to Allocate Traffic to Sub-THz Carriers?

As 6G wireless networks transition toward sub-Terahertz (sub-THz) frequencies to satisfy extreme capacity demands, managing the trade-off between massive bandwidth and power consumption becomes a critical design challenge. In this paper, we investigate the fundamental energy efficiency (EE) limits of a dual-band base station site combining a coverage-oriented sub-6 GHz carrier with a capacity-oriented sub-THz carrier. By jointly optimizing hardware parameters and advanced sleep modes via activity factors, we identify four distinct operational regions that govern the EE-optimal behavior across the complete range of data rates. We derive closed-form analytical thresholds that dictate precisely when the sub-THz band should awaken from sleep and how to allocate traffic between the bands in that case. Our results demonstrate that utilizing the sub-THz band is EE-optimal when the power cost of the bandwidth-limited sub-6 GHz band surpasses the static power penalty of activating the sub-THz circuitry. Ultimately, this framework provides mathematically rigorous guidelines for power consumption minimization and sleep-mode management in future green networks.

cs.IT↗

Performance Analysis for ISAC Systems with 1-bit DACs

Low-resolution quantization constrains the maximum achievable gains of multiple-input multiple-output (MIMO) systems. While the adverse effects and mitigation strategies have been thoroughly analyzed for communication systems, the impact of low-resolution quantization on integrated sensing and communication (ISAC) systems remains insufficiently explored in the existing literature. In this paper, we propose an analysis and design framework to investigate and mitigate the effects of 1-bit digital to analog converters (DACs) for ISAC systems. Firstly, an analytical sensing signal-to-noise ratio (SNR) expression is derived by using the Bussgang decomposition. Furthermore, two different methodologies are proposed to design a transmit waveform that satisfies both communication and sensing requirements simultaneously. The first method uses a separate constant modulus (CM) sensing signal since CM signals are known to be more robust to nonlinear distortion than orthogonal frequency division multiplexing (OFDM) modulated signals. The second method employs the squared-infinity norm Douglas-Rachford splitting (SQUID) approach to construct the transmit waveform using nonlinear quantized precoding. Finally, the performance of the proposed methods are validated via numerical simulations to indicate the complexity-performance tradeoff between two different methods.

eess.SP↗

Swarm and Evolutionary Computation for Near-Field Localization

Near-field localization has attracted significant attention in recent years due to the move toward higher frequencies and extremely large aperture arrays, which expand the near-field region and bring many sources into it. This implies that antenna arrays can be used to localize not only in angle but also in range. Although a wide range of localization methods has been developed, each comes with limitations that may hinder practical deployment. This article focuses on a class of techniques that has received relatively little attention in the prior literature despite its strong potential for accurate and efficient location estimation: swarm and evolutionary computation (SEC). These methods are well-suited to the complex optimization landscape of near-field localization and can offer important advantages over conventional approaches such as grid-based subspace methods and deep learning approaches.

eess.SP↗

Low-Complexity ADMM-Based Multicast Beamforming in Cell-Free Massive MIMO Systems

The growing demand for efficient delivery of common content to multiple user equipments (UEs) has motivated significant research in physical-layer multicasting. By exploiting the beamforming capabilities of massive MIMO, multicasting provides a spectrum-efficient solution that avoids unnecessary intra-group interference. A key challenge, however, is solving the max-min fair (MMF) and quality-of-service (QoS) multicast beamforming optimization problems, which are NP-hard due to the non-convex structure and the requirement for rank-1 solutions. Traditional approaches based on semidefinite relaxation (SDR) followed by randomization exhibit poor scalability with system size, while state-of-the-art successive convex approximation (SCA) methods only guarantee convergence to stationary points. In this paper, we propose an alternating direction method of multipliers (ADMM)-based framework for MMF and QoS multicast beamforming in cell-free massive MIMO networks. The algorithm leverages SDR but incorporates a novel iterative elimination strategy within the ADMM updates to efficiently obtain near-global optimal rank-1 beamforming solutions with reduced computational complexity compared to standard SDP solvers and randomization methods. Numerical evaluations demonstrate that the proposed ADMM-based procedure not only achieves superior spectral efficiency but also scales favorably with the number of antennas and UEs compared to state-of-the-art SCA-based algorithms, making it a practical tool for next-generation multicast systems.

eess.SP↗

Convex Optimization-Based Procedures for Non-Convex Quadratic Problems

Mathematical optimization plays a fundamental role in signal processing and wireless communications, serving as an essential framework for the systematic design of modern systems. Many design challenges in these fields, as well as in many others, can naturally be formulated as optimization problems. Over the years, the advancements in signal processing applications have significantly changed the structure and complexity of these optimization problems, creating new challenges in their analysis, understanding, and solution \cite{liu2024survey}. Consequently, the rapid development of sophisticated optimization theories and algorithms tailored to the demands of next-generation systems is crucial. Quadratic optimization problems constitute one of the most important classes of optimization problems in modern engineering systems. In signal processing and communications, quadratic forms naturally emerge when modeling power, energy, covariance matrices, and Euclidean distances, to name a few examples. Consequently, a broad family of practical design problems can be represented using quadratically constrained quadratic programs (QCQPs), where both the objective function and the constraints are quadratic functions of the optimization variables. While convex QCQPs can be solved efficiently using polynomial-time algorithms, the general non-convex QCQP remains computationally challenging. Specifically, indefinite quadratic forms and rank constraints often induce NP-hardness. Non-convex QCQP problems arise in a broad range of signal processing, communications, control, machine learning, and network optimization applications.

eess.SP↗