arXiv ScienceSearch

arXiv subjects

Eleanor Rath

Publications and source records attributed to Eleanor Rath.

8 recordsLinked to original sources

First Results from HERA Phase II

We report the first upper limits on the power spectrum of 21-cm fluctuations during the Epoch of Reionization and Cosmic Dawn from Phase II of the Hydrogen Epoch of Reionization Array (HERA) experiment. HERA Phase II constitutes several significant improvements in the signal chain compared to Phase I, most notably resulting in expanded frequency bandwidth, from 50-250 MHz. In these first upper limits, we investigate a small two-week subset of the available Phase II observations, with a focus on identifying new systematic characteristics of the instrument, and establishing an analysis pipeline to account for them. We report 2$\sigma$ upper limits in eight spectral bands, spanning $5.6 \leq z \leq 24.4$ that are consistent with thermal noise at the $2\sigma$ level for $k \gtrsim 0.6-0.9 h{\rm Mpc}^{-1}$ (band dependent). Our tightest limit during Cosmic Dawn ($z>12$) is $1.13\times 10^6 {\rm mK}^2$ at ($k=0.55 h{\rm Mpc}^{-1}, z=16.78$), and during the EoR ($5.5<z<12$) it is $1.78\times 10^3 {\rm mK}^2$ at ($k=0.70 h{\rm Mpc}^{-1}, z=7.05$). We find that mutual coupling has become our dominant systematic, leaking foreground power that strongly contaminates the low-$k$ modes, resulting in the loss of modes from $k=0.35-0.55$ compared to Phase I data.

astro-ph.CO

Exploring One-point Statistics in HERA Phase I Data: Effects of Foregrounds and Systematics on Measuring One-Point Statistics

Measuring one-point statistics in redshifted 21 cm intensity maps offers an opportunity to explore non-Gaussian features of the early universe. We assess the impact of instrumental effects on measurements made with the Hydrogen Epoch of Reionization Array (HERA) by forward modeling observational and simulation data. Using HERA Phase I observations over 94 nights, we examine the second (m2, variance) and third (m3) moments of images. We employ the DAYENU-filtering method for foreground removal and reduce simulated foreground residuals to 10% of the 21 cm signal residuals. In noiseless cosmological simulations, the amplitudes of one-point statistics measurements are significantly reduced by the instrument response and further reduced by wedge-filtering. Analyses with wedge-filtered observational data, along with expected noise simulations, show that systematics alter the probability distribution of the map pixels. Likelihood analysis based on the observational data shows m2 measurements disfavor the cold reionization model characterized by inefficient X-ray heating, in line with other power spectra measurements. Small signals in m3 due to the instrument response of the Phase I observation and wedge-filtering make it challenging to use these non-Gaussian statistics to explore model parameters. Forecasts with the full HERA array predict high signal-to-noise ratios for m2, m3, and S3 assuming no foregrounds, but wedge-filtering drastically reduces these ratios. This work demonstrates conclusively that a comprehensive understanding of instrumental effects on m2 and m3 is essential for their use as a cosmological probe, given their dependence on the underlying model.

astro-ph.CO

Impacts and Statistical Mitigation of Missing Data on the 21cm Power Spectrum: A Case Study with the Hydrogen Epoch of Reionization Array

The precise characterization and mitigation of systematic effects is one of the biggest roadblocks impeding the detection of the fluctuations of cosmological 21cm signals. Missing data in radio cosmological experiments, often due to radio frequency interference (RFI), poses a particular challenge to power spectrum analysis as it could lead to the ringing of bright foreground modes in Fourier space, heavily contaminating the cosmological signals. Here we show that the problem of missing data becomes even more arduous in the presence of systematic effects. Using a realistic numerical simulation, we demonstrate that partially flagged data combined with systematic effects can introduce significant foreground ringing. We show that such an effect can be mitigated through inpainting the missing data. We present a rigorous statistical framework that incorporates the process of inpainting missing data into a quadratic estimator of the 21cm power spectrum. Under this framework, the uncertainties associated with our inpainting method and its impact on power spectrum statistics can be understood. These results are applied to the latest Phase II observations taken by the Hydrogen Epoch of Reionization Array, forming a crucial component in power spectrum analyses as we move toward detecting 21cm signals in the ever more noisy RFI environment.

astro-ph.CO

A demonstration of the effect of fringe-rate filtering in the Hydrogen Epoch of Reionization Array delay power spectrum pipeline

Radio interferometers targeting the 21cm brightness temperature fluctuations at high redshift are subject to systematic effects that operate over a range of different timescales. These can be isolated by designing appropriate Fourier filters that operate in fringe-rate (FR) space, the Fourier pair of local sidereal time (LST). Applications of FR filtering include separating effects that are correlated with the rotating sky vs. those relative to the ground, down-weighting emission in the primary beam sidelobes, and suppressing noise. FR filtering causes the noise contributions to the visibility data to become correlated in time however, making interpretation of subsequent averaging and error estimation steps more subtle. In this paper, we describe fringe rate filters that are implemented using discrete prolate spheroidal sequences, and designed for two different purposes -- beam sidelobe/horizon suppression (the `mainlobe' filter), and ground-locked systematics removal (the `notch' filter). We apply these to simulated data, and study how their properties affect visibilities and power spectra generated from the simulations. Included is an introduction to fringe-rate filtering and a demonstration of fringe-rate filters applied to simple situations to aid understanding.

astro-ph.CO

Hydrogen Epoch of Reionization Array (HERA) Phase II Deployment and Commissioning

This paper presents the design and deployment of the Hydrogen Epoch of Reionization Array (HERA) phase II system. HERA is designed as a staged experiment targeting 21 cm emission measurements of the Epoch of Reionization. First results from the phase I array are published as of early 2022, and deployment of the phase II system is nearing completion. We describe the design of the phase II system and discuss progress on commissioning and future upgrades. As HERA is a designated Square Kilometer Array (SKA) pathfinder instrument, we also show a number of "case studies" that investigate systematics seen while commissioning the phase II system, which may be of use in the design and operation of future arrays. Common pathologies are likely to manifest in similar ways across instruments, and many of these sources of contamination can be mitigated once the source is identified.

astro-ph.IM

matvis: A matrix-based visibility simulator for fast forward modelling of many-element 21 cm arrays

Detection of the faint 21 cm line emission from the Cosmic Dawn and Epoch of Reionisation will require not only exquisite control over instrumental calibration and systematics to achieve the necessary dynamic range of observations but also validation of analysis techniques to demonstrate their statistical properties and signal loss characteristics. A key ingredient in achieving this is the ability to perform high-fidelity simulations of the kinds of data that are produced by the large, many-element, radio interferometric arrays that have been purpose-built for these studies. The large scale of these arrays presents a computational challenge, as one must simulate a detailed sky and instrumental model across many hundreds of frequency channels, thousands of time samples, and tens of thousands of baselines for arrays with hundreds of antennas. In this paper, we present a fast matrix-based method for simulating radio interferometric measurements (visibilities) at the necessary scale. We achieve this through judicious use of primary beam interpolation, fast approximations for coordinate transforms, and a vectorised outer product to expand per-antenna quantities to per-baseline visibilities, coupled with standard parallelisation techniques. We validate the results of this method, implemented in the publicly-available matvis code, against a high-precision reference simulator, and explore its computational scaling on a variety of problems.

astro-ph.IM

Direct Optimal Mapping Image Power Spectrum and its Window Functions

The key to detecting neutral hydrogen during the epoch of reionization (EoR) is to separate the cosmological signal from the dominating foreground radiation. We developed direct optimal mapping (DOM) to map interferometric visibilities; it contains only linear operations, with full knowledge of point spread functions from visibilities to images. Here, we demonstrate a fast Fourier transform-based image power spectrum and its window functions computed from the DOM images. We use noiseless simulation, based on the Hydrogen Epoch of Reionization Array Phase I configuration, to study the image power spectrum properties. The window functions show $<10^{-11}$ of the integrated power leaks from the foreground-dominated region into the EoR window; the 2D and 1D power spectra also verify the separation between the foregrounds and the EoR.

astro-ph.IM

A Compact Millimeter-Wavelength Fourier-Transform Spectrometer

We have constructed a Fourier-transform spectrometer (FTS) operating between 50 and 330 GHz with minimum volume (355 x260 x64 mm) and weight (13 lbs) while maximizing optical throughput (100 $\mathrm{mm}^2$ sr) and optimizing the spectral resolution (4 GHz). This FTS is designed as a polarizing Martin-Puplett interferometer with unobstructed input and output in which both input polarizations undergo interference. The instrument construction is simple with mirrors milled on the box walls and one motorized stage as the single moving element. We characterize the performance of the FTS, compare the measurements to an optical simulation, and discuss features that relate to details of the FTS design. The simulation is also used to determine the tolerance of optical alignments for the required specifications. We detail the FTS mechanical design and provide the control software as well as the analysis code online.

astro-ph.IM