arXiv subjects

Eirik Keilegavlen

Publications and source records attributed to Eirik Keilegavlen.

54 records · Page 3Linked to original sources

arXiv2019

A pore-scale study of transport of inertial particles by water in porous media

We study the transport of inertial particles in water flow in porous media. Our interest lies in understanding the accumulation of particles including the possibility of clogging. We propose that accumulation can be a result of hydrodynamic effects: the tortuous paths of the porous medium generate regions of dominating strain/vorticity, which favour the accumulation/dispersion of the inertial particles. Numerical simulations show that essentially two accumulation regimes are identified: for low and for high flow velocities. When particles accumulate in high-velocity regions, at the entrance of a pore throat, a clog is formed. The formation of a clog significantly modifies the flow, as the partial blockage of the pore causes a local redistribution of pressure. This redistribution can divert the upstream water flow into neighbouring pores. Moreover, we show that accumulation in high velocity regions occurs in heterogeneous media, but not in homogeneous media, where we refer to homogeneity with respect to the distribution of the pore throat diameters.

physics.flu-dyn↗

arXiv2019

A combined finite element-finite volume framework for phase-field fracture

Numerical simulations of brittle fracture using phase-field approaches often employ a discrete approximation framework that applies the same order of interpolation for the displacement and phase-field variables. Most common is to use linear finite elements to discretize the linear momentum and phase-field equations. However the use of $P_1$ Lagrange shape functions to model the phase-field is not optimal, since the latter develops cusps for fully developed cracks that in turn occur at locations correspoding to Gauss points of the associated FE model for the mechanics. Such feature is challenging to reproduce accurately with low order elements, and consequently element sizes must be made very small relative to the phase-field regularization parameter in order to achieve convergence of results with respect to the mesh. In this paper, we combine the standard $P_1$ FE discretization of stress equilibrium with a cell-centered finite volume approximation of the phase-field evolution equation based on the two-point flux approximation that is constructed on the same simplex mesh. Compared to a pure FE formulation utilizing linear elements, the proposed framework results in looser restrictions on mesh refinement with respect to the phase-field length scale. Furthermore, initialization of the history field is straightforward and accomplished through a local procedure. The ability to employ a coarser mesh relative to the traditional implementation is shown for several numerical examples, demonstrating savings in computational cost on the order of 50 to 80 percent for the studied cases.

math.NA↗

arXiv2018

Call for participation: Verification benchmarks for single-phase flow in three-dimensional fractured porous media

This call for participation proposes four benchmark tests to verify and compare numerical schemes to solve single-phase flow in fractured porous media. With this, the two-dimensional suite of benchmark tests presented by Flemisch et al. 2018 is extended to include three-dimensional problems. Moreover, transport simulations are included as a means to compare discretization methods for flow. With this publication, we invite researchers to contribute to the study by providing results to the test cases based on their applied discretization methods.

math.NA↗

arXiv2018

Unified approach to discretization of flow in fractured porous media

In this paper, we introduce a mortar-based approach to discretizing flow in fractured porous media, which we term the mixed-dimensional flux coupling scheme. Our formulation is agnostic to the discretizations used to discretize the fluid flow equations in the porous medium and in the fractures, and as such it represents a unified approach to integrated fractured geometries into any existing discretization framework. In particular, several existing discretization approaches for fractured porous media can be seen as special instances of the approach proposed herein. We provide an abstract stability theory for our approach, which provides explicit guidance into the grids used to discretize the fractures and the porous medium, as dependent on discretization methods chosen for the respective domains. The theoretical results are sustained by numerical examples, wherein we utilize our framework to simulate flow in 2D and 3D fractured media using control volume methods (both two-point and multi-point flux), Lagrangian finite element methods, mixed finite element methods, and virtual element methods. As expected, regardless of the ambient methods chosen, our approach leads to stable and convergent discretizations for the fractured problems considered, within the limits of the discretization schemes.

math.NA↗

arXiv2018

Flow in fractured porous media: A review of conceptual models and discretization approaches

The last decade has seen a strong increase of research into flows in fractured porous media, mainly related to subsurface processes, but also in materials science and biological applications. Connected fractures totally dominate flow-patterns, and their representation is therefore a critical part in model design. Due to the fracture's characteristics as approximately planar discontinuities with an extreme size to width ratio, they challenge standard macroscale mathematical and numerical modeling of flow based on averaging. Thus, over the last decades, various, and also fundamentally different, approaches have been developed. This paper reviews common conceptual models and discretization approaches for flow in fractured porous media, with an emphasis on the dominating effects the fractures have on flow processes. In this context, the paper discuss the tight connection between physical and mathematical modeling and simulation approaches. Extensions and research challenges related to transport, multi-phase flow and fluid-solid interaction are also commented on.

physics.geo-ph↗

arXiv2018

A Finite-Volume Discretization for Deformation of Fractured Media

Simulating the deformation of fractured media requires the coupling of different models for the deformation of fractures and the formation surrounding them. We consider a cell-centered finite-volume approach, termed the multipoint stress approximation (MPSA) method, which is developed in order to discretize coupled flow and mechanical deformation in the subsurface. Within the MPSA framework, we consider fractures as co-dimension one inclusions in the domain, with the fracture surfaces represented as line pairs in 2D (faces in 3D) that displace relative to each other. Fracture deformation is coupled to that of the surrounding domain through internal boundary conditions. This approach is natural within the finite-volume framework, where tractions are defined on surfaces of the grid. The MPSA method is capable of modeling deformation considering open and closed fractures with complex and nonlinear relationships governing the displacements and tractions at the fracture surfaces. We validate our proposed approach using both problems for which analytical solutions are available and more complex benchmark problems, including comparison with a finite-element discretization.

math.NA↗

arXiv2018

Conforming, non-conforming and non-matching discretization couplings in discrete fracture network simulations

Simulations of fluid flow in naturally fractured rocks have implications for several subsurface applications, including energy storage and extraction, and waste storage. We are interested in flow in discrete fracture networks, which explicitly represent flow in fracture surfaces, but ignore the impact of the surrounding host rock. Fracture networks, generated from observations or stochastic simulations, will contain intersections of arbitrary length, and intersection lines can further cross, forming a highly complex geometry. As the flow exchange between fractures, thus in the network, takes place in these intersections, an adequate representation of the geometry is critical for simulation accuracy. In practice, the intersection dynamics must be handled by a combination of the simulation grid, which may or may not resolve the intersection lines, and the numerical methods applied on the grid. In this work, we review different classes of numerical approaches proposed in recent years, covering both methods that conform to the grid, and non-matching cases. Specific methods considered herein include finite element, mixed and virtual finite elements and control volume methods. We expose our methods to an extensive set of test cases, ranging from artificial geometries designed to test difficult configurations, to a network extruded from a real fracture outcrop. The main outcome is guidances for choice of simulation models and numerical discretization with a trade off on the computational cost and solution accuracy.

math.NA↗

arXiv2018

Transport of polymer particles in a oil-water flow in porous media: enhancing oil recovery

We study a heuristic, core-scale model for the transport of polymer particles in a two phase (oil and water) porous medium. We are motivated by recent experimental observations which report increased oil recovery when polymers are injected after the initial waterflood. The recovery mechanism is believed to be microscopic diversion of the flow, where injected particles can accumulate in narrow pore throats and clog it, in a process known as a log-jamming effect. The blockage of the narrow pore channels lead to a microscopic diversion of the water flow, causing a redistribution of the local pressure, which again can lead to the mobilization of trapped oil, enhancing its recovery. Our objective herein is to develop a core-scale model that is consistent with the observed production profiles. We show that previously obtained experimental results can be qualitatively explained by a simple two-phase flow model with an additional transport equation for the polymer particles. A key aspect of the formulation is that the microscopic heterogeneity of the rock and a dynamic altering of the permeability must be taken into account in the rate equations.

physics.flu-dyn↗

arXiv2017

Hybrid-Dimensional Finite Volume Discretizations for Fractured Porous Media

Over the last decade, finite volume discretizations for flow in porous media have been extended to handle situations where fractures dominate the flow. These discretizations have successfully been combined with the discrete fracture-matrix models to yield mass conservative methods capable of explicitly incorporating the impact of fractures and their geometry. When combined with a hybrid-dimensional formulation, two central concerns are the restrictions arising from small cell sizes at fracture intersections and the coupling between fractures and matrix. Focusing on these aspects, we demonstrate how finite volume methods effectively can be extended to handle fractures, providing generalizations of previous work. We address the finite volume methods applying a general hierarchical formulation, facilitating implementation with extensive code reuse and providing a natural framework for coupling of different subdomains. Furthermore, we demonstrate how a Schur complement technique may be used to obtain a robust and versatile method for fracture intersection cell elimination. We investigate the accuracy of the proposed elimination method through a series of numerical simulations in 3D and 2D. The simulations, performed on fractured domains containing permeability heterogeneity and anisotropy, also demonstrate the flexibility of the hierarchical framework.

math.NA↗

arXiv2017

PorePy: An Open-Source Simulation Tool for Flow and Transport in Deformable Fractured Rocks

Fractures are ubiquitous in the subsurface and strongly affect flow and deformation. The physical shape of the fractures, they are long and thin objects, puts strong limitations on how the effect of this dynamics can be incorporated into standard reservoir simulation tools. This paper reports the development of an open-source software framework, termed PorePy, which is aimed at simulation of flow and transport in three-dimensional fractured reservoirs, as well as deformation of the reservoir due to shearing along fracture and fault planes. Starting from a description of fractures as polygons embedded in a 3D domain, PorePy provides semi-automatic gridding to construct a discrete-fracture-matrix model, which forms the basis for subsequent simulations. PorePy allows for flow and transport in all lower-dimensional objects, including planes (2D) representing fractures, and lines (1D) and points (0D), representing fracture intersections. Interaction between processes in neighboring domains of different dimension is implemented as a sequence of couplings of objects one dimension apart. This readily allows for handling of complex fracture geometries compared to capabilities of existing software. In addition to flow and transport, PorePy provides models for rock mechanics, poro-elasticity and coupling with fracture deformation models. The software is fully open, and can serve as a framework for transparency and reproducibility of simulations. We describe the design principles of PorePy from a user perspective, with focus on possibilities within gridding, covered physical processes and available discretizations. The power of the framework is illustrated with two sets of simulations; involving respectively coupled flow and transport in a fractured porous medium, and low-pressure stimulation of a geothermal reservoir.

cs.CE↗

arXiv2017

Implementation of mixed-dimensional models for flow in fractured porous media

Models that involve coupled dynamics in a mixed-dimensional geometry are of increasing interest in several applications. Here, we describe the development of a simulation model for flow in fractured porous media, where the fractures and their intersections form a hierarchy of interacting subdomains. We discuss the implementation of a simulation framework, with an emphasis on reuse of existing discretization tools for mono-dimensional problems. The key ingredients are the representation of the mixed-dimensional geometry as a graph, which allows for convenient discretization and data storage, and a non-intrusive coupling of dimensions via boundary conditions and source terms. This approach is applicable for a wide class of mixed-dimensional problems. We show simulation results for a flow problem in a three-dimensional fracture geometry, applying both finite volume and virtual finite element discretizations.

cs.CE↗

arXiv2017

Three-Dimensional Numerical Modeling of Shear Stimulation of Naturally Fractured Reservoirs

Shear dilation based hydraulic stimulations enable exploitation of geothermal energy from reservoirs with inadequate initial permeability. While contributing to enhancing the reservoir's permeability, hydraulic stimulation processes may lead to undesired seismic activity. Here, we present a three dimensional numerical model aiming to increase understanding of this mechanism and its consequences. The fractured reservoir is modeled as a network of explicitly represented large scale fractures immersed in a permeable rock matrix. The numerical formulation is constructed by coupling three physical processes: fluid flow, fracture deformation, and rock matrix deformation. For flow simulations, the discrete fracture matrix model is used, which allows the fluid transport from high permeable conductive fractures to the rock matrix and vice versa. The mechanical behavior of the fractures is modeled using a hyperbolic model with reversible and irreversible deformations. Linear elasticity is assumed for the mechanical deformation and stress alteration of the rock matrix. Fractures are modeled as lower dimensional surfaces embodied in the domain, subjected to specific governing equations for their deformation along the tangential and normal directions. Both the fluid flow and momentum balance equations are approximated by finite volume discretizations. The new numerical model is demonstrated considering a three dimensional fractured formation with a network of 20 explicitly represented fractures. The effects of fluid exchange between fractures and rock matrix on the permeability evolution and the generated seismicity are examined for test cases resembling realistic reservoir conditions.

physics.geo-ph↗

arXiv2017

Reactivation of Fractures in Subsurface Reservoirs - a Numerical Approach using a Static-Dynamic Friction Model

Fluid-induced slip of fractures is characterized by strong multiphysics couplings. Three physical processes are considered: Flow, rock deformation and fracture deformation. The fractures are represented as lower-dimensional objects embedded in a three-dimensional domain. Fluid is modeled as slightly compressible, and flow in both fractures and matrix is accounted for. The deformation of rock is inherently different from the deformation of fractures; thus, two different models are needed to describe the mechanical deformation of the rock. The medium surrounding the fractures is modeled as a linear elastic material, while the slip of fractures is modeled as a contact problem, governed by a static-dynamic friction model. We present an iterative scheme for solving the non-linear set of equations that arise from the models, and suggest how the step parameter in this scheme should depend on the shear modulus and mesh size.

physics.geo-ph↗

arXiv2017

Dual virtual element method for discrete fractures networks

Discrete fracture networks is a key ingredient in the simulation of physical processes which involve fluid flow in the underground, when the surrounding rock matrix is considered impervious. In this paper we present two different models to compute the pressure field and Darcy velocity in the system. The first allows a normal flow out of a fracture at the intersections, while the second grants also a tangential flow along the intersections. For the numerical discretization, we use the mixed virtual finite element method as it is known to handle grid elements of, almost, any arbitrary shape. The flexibility of the discretization allows us to loosen the requirements on grid construction, and thus significantly simplify the flow discretization compared to traditional discrete fracture network models. A coarsening algorithm, from the algebraic multigrid literature, is also considered to further speed up the computation. The performance of the method is validated by numerical experiments.

math.NA↗

arXiv2017

Post-injection normal closure of fractures as a mechanism for induced seismicity

Understanding the controlling mechanisms underlying injection-induced seismicity is important for optimizing reservoir productivity and addressing seismicity-related concerns related to hydraulic stimulation in Enhanced Geothermal Systems. Hydraulic stimulation enhances permeability through elevated pressures, which cause normal deformations, and the shear slip of pre-existing fractures. Previous experiments indicate that fracture deformation in the normal direction reverses as the pressure decreases, e.g., at the end of stimulation. We hypothesize that this normal closure of fractures enhances pressure propagation away from the injection region and significantly increases the potential for post-injection seismicity. To test this hypothesis, hydraulic stimulation is modeled by numerically coupling fracture deformation, pressure diffusion and stress alterations for a synthetic geothermal reservoir in which the flow and mechanics are strongly affected by a complex three-dimensional fracture network. The role of the normal closure of fractures is verified by comparing simulations conducted with and without the normal closure effect.

physics.geo-ph↗

arXiv2017

High-accuracy phase-field models for brittle fracture based on a new family of degradation functions

Phase-field approaches to fracture based on energy minimization principles have been rapidly gaining popularity in recent years, and are particularly well-suited for simulating crack initiation and growth in complex fracture networks. In the phase-field framework, the surface energy associated with crack formation is calculated by evaluating a functional defined in terms of a scalar order parameter and its gradients, which in turn describe the fractures in a diffuse sense following a prescribed regularization length scale. Imposing stationarity of the total energy leads to a coupled system of partial differential equations, one enforcing stress equilibrium and another governing phase-field evolution. The two equations are coupled through an energy degradation function that models the loss of stiffness in the bulk material as it undergoes damage. In the present work, we introduce a new parametric family of degradation functions aimed at increasing the accuracy of phase-field models in predicting critical loads associated with crack nucleation as well as the propagation of existing fractures. An additional goal is the preservation of linear elastic response in the bulk material prior to fracture. Through the analysis of several numerical examples, we demonstrate the superiority of the proposed family of functions to the classical quadratic degradation function that is used most often in the literature.

cond-mat.mtrl-sci↗

arXiv2017

Heterogeneity Preserving Upscaling for Heat Transport in Fractured Geothermal Reservoirs

In simulation of fluid injection in fractured geothermal reservoirs, the characteristics of the physical processes are severely affected by the local occurence of connected fractures. To resolve these structurally dominated processes, there is a need to develop discretization strategies that also limit computational effort. In this paper we present an upscaling methodology for geothermal heat transport with fractures represented explicitly in the computational grid. The heat transport is modeled by an advection-conduction equation for the temperature, and solved on a highly irregular coarse grid that preserves the fracture heterogeneity. The upscaling is based on different strategies for the advective term and the conductive term, respectively. The coarse scale advective term is constructed from sums of fine scale fluxes, whereas the coarse scale conductive term is constructed based on numerically computed basis functions. The method naturally incorporates a coupling between the matrix and the fractures via the discretization, so that explicit transfer terms that couple solution variables in the fractures and the matrix are avoided. Numerical results show that the upscaling methodology performs well, in particular for large upscaling ratios, and that it is applicable also to highly complex fracture networks.

cs.CE↗

arXiv2015

Finite volume methods for elasticity with weak symmetry

We introduce a new cell-centered finite volume discretization for elasticity with weakly enforced symmetry of the stress tensor. The method is motivated by the need for robust discretization methods for deformation and flow in porous media, and falls in the category of multi-point stress approximations (MPSA). By enforcing symmetry weakly, the resulting method has additional flexibility beyond previous MPSA methods. This allows for a construction of a method which is applicable to all grid types, and in particular the method amends a crucial shortcoming in previous MPSA methods for simplex grids. By formulating the method as a discrete variational problem, we prove convergence of the new method for a wide range of problems, with conditions that can be verified at the time of discretization. We present the first set of comprehensive numerical tests for the MPSA methods in three dimensions, covering Cartesian and simplex grids, with both heterogeneous and nearly incompressible media. The tests show that the new method consistently is second order convergent in displacement, despite being lowest order, with a rate that mostly is between 1 and 2 for stresses. The results further show that the new method is more robust and computationally cheaper than previous MPSA methods.

math.NA↗