arXiv subjects

Edmund Tarleton

Publications and source records attributed to Edmund Tarleton.

At least 19 recordsLinked to original sources

arXiv2026

The interplay between thermomigration and stress-driven hydrogen transport in metals

Thermomigration is the driving force for hydrogen transport due to a temperature gradient. It can compete with hydrogen transport induced by stress gradients. While stress-driven hydrogen migration is well established, thermomigration remains comparatively underexplored, largely due to limited mechanistic understanding and a scarcity of experimental data. In this work, we develop a thermodynamically consistent framework for hydrogen transport, incorporating a mechanistic model for thermomigration. This is implemented within a finite element framework using an effective chemical potential. Using case studies of iron and nickel heat exchangers and zirconium alloy nuclear fuel cladding, we quantify the competing and synergistic effects of thermomigration and stress-driven transport. We show that thermomigration often dominates hydrogen redistribution in heat-carrying components, even in the presence of significant thermal incompatibility stresses. However, stress-driven transport is shown to become decisive near sharp stress concentrators. A graphical method is introduced to rapidly identify the dominant transport mechanism without requiring fully coupled simulations. The results provide practical guidance for assessing hydrogen redistribution and embrittlement risk in heat-carrying structural components.

cond-mat.mtrl-sci↗

arXiv2025

A Thermodynamic Model for Thermomigration in Metals

We investigate the mechanisms involved in the thermomigration of interstitial hydrogen in metals. Using irreversible thermodynamics, we develop a comprehensive mechanistic model to capture the controlling effects. Crucially, through validation against published experimental data, our results demonstrate that an electron-wind effect plays a significant role, particularly for materials in which the thermomigration direction matches the heat flux. These findings provide new insights into the factors that affect the localisation of solutes in metals. Moreover, our results indicate that atomistic models may be inadequate for detailed thermomigration studies due to the omission of electronic effects.

cond-mat.stat-mech↗

arXiv2025

The link between Microstructural Heterogeneity, Diffusivity, and Hydrogen Embrittlement

Green hydrogen is likely to play a major role in decarbonising the aviation industry. It is crucial to understand the effects of microstructure on hydrogen redistribution, which may be implicated in the embrittlement of candidate fuel system metals. We have developed a stochastic multiscale finite element modelling framework that integrates micromechanical and hydrogen transport models, such that the dominant microstructural effects can be efficiently accounted for at millimetre length scales. Our results show that microstructure has a significant effect on hydrogen localisation in elastically anisotropic materials, which exhibit an interesting interplay between microstructure and millimetre-scale hydrogen redistribution at various loading rates. Considering 316L stainless steel and nickel, a direct comparison of model predictions against experimental hydrogen embrittlement data reveals that the reported sensitivity to loading rate is strongly linked with rate-dependent grain scale diffusion. These findings highlight the need to incorporate microstructural characteristics in the design of hydrogen resistant materials.

cond-mat.mtrl-sci↗

arXiv2025

Direct Imaging of Hydrogen-Driven Dislocation and Strain Field Evolution in a Stainless Steel Grain

Hydrogen embrittlement (HE) poses a significant challenge to the durability of materials used in hydrogen production and utilization. Disentangling the competing nanoscale mechanisms driving HE often relies on simulations and electron-transparent sample techniques, limiting experimental insights into hydrogen-induced dislocation behavior in bulk materials. This study employs in situ Bragg coherent X-ray diffraction imaging to track three-dimensional dislocation and strain field evolution during hydrogen charging in a bulk grain of austenitic 316 stainless steel. Tracking a single dislocation reveals hydrogen-enhanced mobility and relaxation, consistent with dislocation dynamics simulations. Subsequent observations reveal dislocation unpinning and climb processes, likely driven by osmotic forces. Additionally, nanoscale strain analysis around the dislocation core directly measures hydrogen-induced elastic shielding. These findings experimentally validate theoretical predictions and offer mechanistic insights into hydrogen-driven dislocation behavior. The quantified nanoscale phenomena serve as critical inputs for multiscale modeling frameworks to predict bulk material responses and accelerate the development of HE-resistant alloys.

cond-mat.mtrl-sci↗

arXiv2024

Localised stress and strain distribution in sliding

In this paper, we present a comprehensive analysis of the contact mechanics associated with a micron-sized sliding asperity, which plays a crucial role in the abrasive wear processes. Utilising nanoscratch testing, we experimentally investigate the deformation and employ High-Resolution Electron Backscatter Diffraction (HR-EBSD) to characterise the resulting strain fields at various locations in the residual nanoscratch. To simulate these experiments, we utilise a physically-based Crystal Plasticity Finite Element (CPFE) model, enabling a three-dimensional simulation that can accurately capture the measured elastic and plastic strain fields around the sliding contact. This knowledge serves as a foundation from which we may be able to discern the multi-physical processes governing micro-scale wear phenomena.

cond-mat.mtrl-sci↗

arXiv2022

Macroscopic analysis of time dependent plasticity in Ti alloys

Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major alloy systems: commercially pure titanium (two alloys with different oxygen content), Ti-6Al-4V (two microstructures with differing beta phase fractions) and Ti-6Al-2Sn-4Zr-xMo (two alloys with different Mo content x= 2 or 6, and portion of beta phase). Key parameters controlling the time dependent plasticity were determined as a function of temperature. Both activation volume and energy were found to increase with temperature in all six alloys. It was found that the dwell fatigue effect is more significant by oxygen alloying but is suppressed by the addition of Mo. The presence of the beta phase did not strongly affect the dwell fatigue, however, it was suppressed at high temperature due to the low strain rate and strain rate sensitivity.

cond-mat.mtrl-sci↗

arXiv2021

Computation of Burgers Vectors from Elastic Strain and Lattice Rotation Data

A theoretical framework for computation of Burgers vectors from strain and lattice rotation data in materials with low dislocation density is presented, as well as implementation into a computer program to automate the process. The efficacy of the method is verified using simulated data of dislocations with known results. A three-dimensional dataset retrieved from Bragg coherent diffraction imaging (BCDI) and a two-dimensional dataset from high-resolution transmission Kikuchi diffraction (HR-TKD) are used as inputs to demonstrate the reliable identification of dislocation positions and accurate determination of Burgers vectors from experimental data. For BCDI data, the results found using our approach show very close agreement to those expected from empirical methods. For the HR-TKD data, the predicted dislocation position and the computed Burgers vector showed fair agreement with the expected result, which is promising considering the substantial experimental uncertainties in this dataset. The method reported in this paper provides a general and robust framework for determining dislocation position and associated Burgers vector, and can be readily applied to data from different experimental techniques.

cond-mat.mtrl-sci↗

arXiv2021

Cold dwell behaviour of Ti$_6$Al alloy: Understanding load shedding using digital image correlation and crystal plasticity simulations

Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured during creep by DIC and were used to calibrate the crystal plasticity model. The values of critical resolved shear stresses (CRSS) of the two main slip systems (basal and prismatic) were determined as a function of temperature. Stress along paths across the boundaries of two grain pairs, (1) a `rogue' grain pair and (2) a `non-rogue' grain pair, were determined at different temperatures. Load shedding was observed in the `rogue' grain pair, where a stress increment during the creep period was found in the `hard' grain. At elevated temperatures, 120 C was found to be the worst-case scenario as the stress difference at the grain boundaries of these two grain pairs were found to be the largest among the three temperatures. This can be attributed to the fact that the strain rate sensitivity of both prismatic and basal slip systems is at its greatest in this worst-case scenario temperature.

cond-mat.mtrl-sci↗

arXiv2021

Evaluation of local stress state due to grain-boundary sliding during creep within a crystal plasticity finite element multi-scale framework

Previous studies demonstrate that grain-boundary sliding could accelerate creep rate and give rise to large internal stresses that can lead to damage development, e.g. formation of wedge cracks. The present study provides more insight into the effects of grain-boundary sliding (GBS) on the deformation behaviour of realistic polycrystalline aggregates during creep, through the development of a computational framework which combines: i) the use of interface elements for sliding at grain boundaries, and ii) special triple point (in 2D) or triple line (in 3D) elements to prevent artificial dilation at these locations in the microstructure with iii) a physically-based crystal plasticity constitutive model for time-dependent inelastic deformation of the individual grains. Experimental data at various scales is used to calibrate the framework and compare with model predictions. We pay particular consideration to effects of grain boundary sliding during creep of Type 316 stainless steel, which is used extensively in structural components of the UK fleet of Advanced Gas Cooled Nuclear Reactors (AGRs). It is found that the anisotropic deformation of the grains and the mismatch in crystallographic orientation between neighbouring grains play a significant role in determining the extent of sliding on a given boundary. Their effect on the development of stress within the grains, particularly at triple grain junctions, and the increase in axial stress along transverse boundaries are quantified. The article demonstrates that the magnitude of the stress along the facets is highly-dependent on the crystallographic orientations of the neighbouring grains and the relative amount of sliding. Boundaries, transverse to the applied load tend to carry higher normal stresses of the order of 100-180 MPa, in cases where the neighbouring grains consist of plastically-harder crystallographic orientations.

cond-mat.mtrl-sci↗

arXiv2020

Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic $\alpha$-uranium

Calibrating and verifying crystal plasticity material models is a significant challenge, particularly for materials with a number of potential slip and twin systems. Here we use digital image correlation on coarse-grained $\alpha$-uranium during tensile testing in conjunction with crystal plasticity finite element simulations. This approach allows us to determine the critical resolved shear stress, and hardening rate of the different slip and twin systems. The constitutive model is based on dislocation densities as state variables and the simulated geometry is constructed from electron backscatter diffraction images that provide shape, size and orientation of the grains, allowing a direct comparison between virtual and real experiments. An optimisation algorithm is used to find the model parameters that reproduce the evolution of the average strain in each grain as the load is increased. A tensile bar, containing four grains aligned with the load direction, is used to calibrate the model with eight unknown parameters. The approach is then independently validated by simulating the strain distribution in a second tensile bar. Different mechanisms for the hardening of the twin systems are evaluated. The latent hardening of the most active twin system turns out to be determined by coplanar twins and slip. The hardening rate of the most active slip system is lower than in fine-grained $\alpha$-uranium. The method developed in the present research can be applied to identify the critical resolved shear stress and hardening parameters of other coarse-grained materials.

cond-mat.mtrl-sci↗

arXiv2020

An in-situ synchrotron diffraction study of stress relaxation in titanium: Effect of temperature and oxygen on cold dwell fatigue

There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to understand the complex cold dwell fatigue problem. Knowing the effect of operating temperature and oxygen content on cold dwell fatigue will be beneficial for future alloy design to address this problem. In this work, synchrotron X-ray diffraction during stress relaxation experiments was used to characterise the time dependent plastic behaviour of two commercially pure titanium samples (grade 1 and grade 4) with different oxygen content at 4 different temperatures (room temperature, 75C, 145C and 250C). Lattice strains were measured by tracking the diffraction peak shift from multiple crystallographic plane families (21 diffraction rings) as a function of their orientation with respect to the loading direction. Critical resolved shear stress, activation energy and activation volume were established for both prismatic and basal slip as a function of temperature and oxygen content by fitting a crystal plasticity finite element model to the lattice strain relaxation responses measured along the loading axis for five strong reflections. Higher strain rate sensitivity was found to lead to higher plasticity during cold dwell.

cond-mat.mtrl-sci↗

arXiv2020

Orientation dependence of the nano-indentation behaviour of pure tungsten

Coupling of nano-indentation and crystal plasticity finite element (CPFE) simulations is widely used to quantitatively probe the small-scale mechanical behaviour of materials. Earlier studies showed that CPFE can successfully reproduce the load-displacement curves and surface morphology for different crystal orientations. Here, we report the orientation dependence of residual lattice strain patterns and dislocation structures in tungsten. For orientations with one or more Burgers vectors close to parallel to the sample surface, dislocation movement and residual lattice strains are confined to long, narrow channels. CPFE is unable to reproduce this behaviour, and our analysis reveals the responsible underlying mechanisms.

cond-mat.mtrl-sci↗

arXiv2020

Scratching the surface: Elastic rotations beneath nanoscratch and nanoindentation tests

In this paper, we investigate the residual deformation field in the vicinity of nano-scratch tests using two orientations of a Berkovich tip on an (001) Cu single crystal. We compare the deformation with that from indentation, in an attempt to understand the mechanisms of deformation in tangential sliding. The lattice rotation fields are mapped experimentally using high-resolution electron backscatter diffraction (HR-EBSD) on cross-sections prepared using focused ion beam (FIB). A physically-based crystal plasticity finite element model (CPFEM) is used to simulate the lattice rotation fields, and provide insight into the 3D rotation field surrounding nano-scratch experiments, as it transitions from an initial static indentation to a steady-state scratch. The CPFEM simulations capture the experimental rotation fields with good fidelity, and show how the rotations about the scratch direction are reversed as the indenter moves away from the initial indentation.

cond-mat.mtrl-sci↗

arXiv2020

Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations

There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. This work uses a novel approach of in situ synchrotron X-ray diffraction during stress relaxation tests, to quantify the time dependent plasticity. Measured lattice strains from multiple lattice families (21 diffraction rings) were compared with simulated lattice strains from crystal plasticity finite element (CPFE) simulations. The prism slip parameters were found to show stronger strain rate sensitivity compared to basal slip, and this has a significant effect on stress redistribution to hard grain orientations during cold creep.

cond-mat.mtrl-sci↗

arXiv2019

Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study

Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To capture dose-dependent evolution of properties, we experimentally characterise samples with damage levels from 0.01 to 1 dpa. Spherical nano-indentation of <001> grains shows hardness increasing up to a dose of 0.032 dpa, beyond which it saturates. AFM measurements show pile-up increasing up to the same dose, beyond which large pile-up and slip-steps are seen. Based on the observations we develop a crystal plasticity (CPFE) model for the irradiated material. It captures irradiation-induced hardening followed by strain-softening through interaction of irradiation-defects and gliding dislocations. Shear resistance of irradiation-defects is derived from TEM observations of similarly irradiated samples. Nano-indentation of pristine and implanted tungsten of doses 0.01, 0.1, 0.32 and 1 dpa is simulated. Two model parameters are fitted to the experimental results of the 0.01 dpa sample and are kept unchanged for all other doses. Peak load, indent surface profiles and damage saturation predicted by the CPFE model closely match experimental observations. Predicted lattice distortions and dislocation distributions around indents agree with corresponding measurements from HR-EBSD. Finally, the CPFE model is used to predict the macroscopic stress-strain response of similarly irradiated bulk tungsten material.

physics.comp-ph↗

arXiv2019

Dislocation density distribution at slip band-grain boundary intersections

We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain prohibits easy passage for dislocation transmission. This incompatibility results in local micro-plasticity within the slipping grain, near to where the slip planes intersect the grain boundary, and we observe bands of GNDs lying near the grain boundary. We observe that the distribution of GNDs can be significantly influenced by the formation of grain boundary ledges that serve as secondary dislocation sources. This observation highlights the non-continuum nature of polycrystal deformation and helps us understand the higher order complexity of grain boundary characteristics.

cond-mat.mtrl-sci↗

arXiv2019

The influence of hydrogen core force shielding on dislocation junctions in iron

The influence of hydrogen on dislocation junctions was analysed by incorporating a hydrogen dependent core force into nodal based discrete dislocation dynamics. Hydrogen reduces the core energy of dislocations, which reduces the magnitude of the dislocation core force. We refer to this as hydrogen core force shielding, as it is analogous to hydrogen elastic shielding but occurs at much lower hydrogen concentrations. The dislocation core energy change due to hydrogen was calibrated at the atomic scale accounting for the nonlinear inter-atomic interactions at the dislocation core, giving the model a sound physical basis. Hydrogen was found to strengthen binary junctions and promote the nucleation of dislocations from triple junctions. Simulations of microcantilever bend tests with hydrogen core force shielding showed an increase in the junction density and subsequent hardening. These simulations were performed at a small hydrogen concentration realistic for bcc iron.

cond-mat.mtrl-sci↗

arXiv2019

Orientation-dependent indentation response of helium-implanted tungsten

A literature review of studies investigating the topography of nano-indents in ion-implanted materials reveals seemingly inconsistent observations, with report of both pile-up and sink-in. This may be due to the crystallographic orientation of the measured sample point, which is often not considered when evaluating implantation-induced changes in the deformation response. Here we explore the orientation dependence of spherical nano-indentation in pure and helium-implanted tungsten, considering grains with <001>, <110> and <111> out-of-plane orientations. Atomic force microscopy (AFM) of indents in unimplanted tungsten shows little orientation dependence. However, in the implanted material a much larger, more localised pile-up is observed for <001> grains than for <110> and <111> orientations. Based on the observations for <001> grains, we hypothesise that a large initial hardening due to helium-induced defects is followed by localised defect removal and subsequent strain softening. A crystal plasticity finite element model of the indentation process, formulated based on this hypothesis, accurately reproduces the experimentally-observed orientation-dependence of indent morphology. The results suggest that the mechanism governing the interaction of helium-induced defects with glide dislocations is orientation independent. Rather, differences in pile-up morphology are due to the relative orientations of the crystal slip systems, sample surface and spherical indenter. This highlights the importance of accounting for crystallographic orientation when probing the deformation behaviour of ion-implanted materials using nano-indentation.

physics.app-ph↗