arXiv subjects

Edgar Ramirez-Laboreo

Publications and source records attributed to Edgar Ramirez-Laboreo.

13 recordsLinked to original sources

arXiv2025

Run-to-Run Indirect Trajectory Tracking Control of Electromechanical Systems Based on Identifiable and Flat Models

Differentially flat models are frequently used to design feedforward controllers for electromechanical systems. However, control performance depends on model accuracy, which makes feedback imperative. This paper presents a control scheme for electromechanical systems in which measuring or estimating the output to be controlled -- typically the position -- is not feasible. It employs an identifiable-model-based controller and predictor, coupled with an iterative loop that updates model parameters using the error between a measurable output and its prediction. Simulations on electromechanical switching devices show effective tracking of the desired position trajectory using only coil current measurements.

eess.SY↗

arXiv2025

Flatness-based trajectory planning for 3D overhead cranes with friction compensation and collision avoidance

This paper presents an optimal trajectory generation method for 3D overhead cranes by leveraging differential flatness. This framework enables the direct inclusion of complex physical and dynamic constraints, such as nonlinear friction and collision avoidance for both payload and rope. Our approach allows for aggressive movements by constraining payload swing only at the final point. A comparative simulation study validates our approach, demonstrating that neglecting dry friction leads to actuator saturation and collisions. The results show that friction modeling is a fundamental requirement for fast and safe crane trajectories.

cs.RO↗

arXiv2025

A hybrid dynamic model and parameter estimation method for accurately simulating overhead cranes with friction

This paper presents a new approach to accurately simulating 3D overhead cranes with friction. Although nonlinear friction dynamics has a significant impact on these systems, accurately modeling this phenomenon in simulations is a significant challenge. Traditional methods often rely on imprecise approximations of friction or require excessive computational times for reliable results. To address this, we present a hybrid dynamical model that features a trade-off between high-fidelity friction modeling and computational efficiency. Furthermore, we present a step-by-step algorithm for the comprehensive estimation of all unknown system parameters, including friction. This methodology is based on Bayesian Linear Regression and Least Squares (LS) estimations. Finally, experimental validation with a laboratory crane confirms the effectiveness of the proposed modeling and estimation approach.

eess.SY↗

arXiv2024

An Audio-Based Iterative Controller for Soft Landing of Electromechanical Relays

Electromechanical relays and contactors suffer from strong collisions at the end of the switching operations. This causes several undesirable phenomena, such as clicking, mechanical wear and contact bounce. Thus, there is great interest in mitigating these switching impacts while keeping the advantageous features of these devices. This paper proposes a complete control strategy for soft landing. The control structure includes three main components. The first one is a real-time flux-tracking feedback controller, which presents several advantages over voltage or current control. The second one is a feedforward controller, which computes the flux reference signal based on a proposed dynamical model and the desired position trajectory for the switching operations. Lastly, the third control component is a learning-type run-to-run adaptation law that iteratively adapts the model parameters based on an audio signal. It exploits the repetitive nature of these devices in order to circumvent modeling discrepancies due to unit-to-unit variability or small changes between operations. The effectiveness of the proposed control is demonstrated through various experiments.

eess.SY↗

arXiv2024

Probability-Based Optimal Control Design for Soft Landing of Short-Stroke Actuators

The impact forces during switching operations of short-stroke actuators may cause bouncing, audible noise and mechanical wear. The application of soft-landing control strategies to these devices aims at minimizing the impact velocities of their moving components to ultimately improve their lifetime and performance. In this paper, a novel approach for soft-landing trajectory planning, including probability functions, is proposed for optimal control of the actuators. The main contribution of the proposal is that it considers uncertainty in the contact position and hence the obtained trajectories are more robust against system uncertainties. The problem is formulated as an optimal control problem and transformed into a two-point boundary value problem for its numerical resolution. Simulated and experimental tests have been performed using a dynamic model and a commercial short-stroke solenoid valve. The results show a significant improvement in the expected velocities and accelerations at contact with respect to past solutions in which the contact position is assumed to be perfectly known.

eess.SY↗

arXiv2024

A Hybrid Algorithm for Iterative Adaptation of Feedforward Controllers: an Application on Electromechanical Switches

Electromechanical switching devices such as relays, solenoid valves, and contactors offer several technical and economic advantages that make them widely used in industry. However, uncontrolled operations result in undesirable impact-related phenomena at the end of the stroke. As a solution, different soft-landing controls have been proposed. Among them, feedforward control with iterative techniques that adapt its parameters is a solution when real-time feedback is not available. However, these techniques typically require a large number of operations to converge or are computationally intensive, which limits a real implementation. In this paper, we present a new algorithm for the iterative adaptation that is able to eventually adapt the search coordinate system and to reduce the search dimensional size in order to accelerate convergence. Moreover, it automatically toggles between a derivative-free and a gradient-based method to balance exploration and exploitation. To demonstrate the high potential of the proposal, each novel part of the algorithm is compared with a state-of-the-art approach via simulation.

eess.SY↗

arXiv2024

Dynamic modeling and predictive control of a microfluidic system

Microfluidics, the study of fluids in microscopic channels, has led to important advances in fields as diverse as microelectronics, biotechnology and chemistry. Microfluidic research is primarily based on the use of microfluidic chips, low-cost devices that can be used to perform laboratory experiments using small amounts of fluid. These systems, however, require advanced control mechanisms in order to accurately achieve the flow rates and pressures required in the experiments. In this paper, we present the design of a model predictive controller intended to regulate the fluid flows in one of these systems. The results obtained, both through simulations and real experiments performed on the device, show that predictive control is an ideal technique to control these systems, especially taking into account all the existing constraints.

eess.SY↗

arXiv2024

Real-Time Electromagnetic Estimation for Reluctance Actuators

Several modeling, estimation, and control strategies have been recently presented for simple reluctance devices like solenoid valves and electromagnetic switches. In this paper, we present a new algorithm to online estimate the flux linkage and the electrical time-variant parameters of these devices, namely the resistance and the inductance, only by making use of discrete-time measurements of voltage and current. The algorithm, which is robust against measurement noise, is able to deal with temperature variations of the device and provides accurate estimations during the motion of the armature. Additionally, an integral {estimator} that uses the start of each operation of the actuator as reset condition has been also implemented for comparative purposes. The performances of both estimation methods are studied and compared by means of simulations and experimental tests, and the benefits of our proposal are emphasized. Possible uses of the estimates and further modeling developments are also described and discussed.

eess.SY↗

arXiv2024

Hybrid Dynamical Model for Reluctance Actuators Including Saturation, Hysteresis and Eddy Currents

A novel hybrid dynamical model for single-coil, short-stroke reluctance actuators is presented in this paper. The model, which is partially based on the principles of magnetic equivalent circuits, includes the magnetic phenomena of hysteresis and saturation by means of the generalized Preisach model. In addition, the eddy currents induced in the iron core are also considered, and the flux fringing effect in the air is incorporated by using results from finite element simulations. An explicit solution of the dynamics without need of inverting the Preisach model is derived, and the hybrid automaton that results from combining the electromagnetic and motion equations is presented and discussed. Finally, an identification method to determine the model parameters is proposed and experimentally illustrated on a real actuator. The results are presented and the advantages of our modeling method are emphasized.

eess.SY↗

arXiv2023

Faster Run-to-Run Feedforward Control of Electromechanical Switching Devices: a Sensitivity-Based Approach

Electromechanical switching devices, such as solenoid valves, contactors, and relays, suffer from undesirable phenomena like clicking, mechanical wear, and contact bounce. Despite that, they are still widely used in industry due to their various economic and technical advantages. This has encouraged the development of controllers aimed at reducing the collisions that occur at the end of the switching operations. One of the most successful approaches has been the use of iterative techniques. However, these algorithms typically require a large number of operations to converge, which is definitely a clear drawback. This paper presents a strategy to improve the convergence rate of such controllers. Our proposal, which is based on the sensitivity of the control law with respect to the parameters, assumes that the performance of the system is more heavily affected by some parameters than others. Thus, by avoiding movements in the directions that have less impact, the search algorithm is expected to drive the system to near-optimal behaviors using fewer operations. Results obtained by simulation show significant improvement in the convergence rate of a state-of-the-art run-to-run feedforward controller, which demonstrates the high potential of the proposal.

eess.SY↗

arXiv2023

Run-to-Run Adaptive Nonlinear Feedforward Control of Electromechanical Switching Devices

Feedforward control can greatly improve the response time and control accuracy of any mechatronic system. However, in order to compensate for the effects of modeling errors or disturbances, it is imperative that this type of control works in conjunction with some form of feedback. In this paper, we present a new adaptive feedforward control scheme for electromechanical systems in which real-time measurements or estimates of the position and its derivatives are not technically or economically feasible. This is the case, for example, of commercial electromechanical switching devices such as solenoid actuators. Our proposal consists of two blocks: on the one hand, a feedforward controller based on differential flatness theory; on the other, an iterative adaptation law that exploits the repetitive operation of these devices to modify the controller parameters cycle by cycle. As shown, this law can be fed with any available measurement of the system, with the only requirement that it can be processed and converted into an indicator of the performance of any given operation. Simulated and experimental results show that our proposal is effective in dealing with a long-standing control problem in electromechanics: the soft-landing control of electromechanical switching devices.

eess.SY↗

arXiv2023

ROM-Based Stochastic Optimization for a Continuous Manufacturing Process

This paper proposes a model-based optimization method for the production of automotive seals in an extrusion process. The high production throughput, coupled with quality constraints and the inherent uncertainty of the process, encourages the search for operating conditions that minimize nonconformities. The main uncertainties arise from the process variability and from the raw material itself. The proposed method, which is based on Bayesian optimization, takes these factors into account and obtains a robust set of process parameters. Due to the high computational cost and complexity of performing detailed simulations, a reduced order model is used to address the optimization. The proposal has been evaluated in a virtual environment, where it has been verified that it is able to minimize the impact of process uncertainties. In particular, it would significantly improve the quality of the product without incurring additional costs, achieving a 50% tighter dimensional tolerance compared to a solution obtained by a deterministic optimization algorithm.

eess.SY↗

arXiv2022

On the Stability of Electromechanical Switching Devices

Electromagnetic relays and solenoid actuators are commonly used for their bistable behavior, which allows for switching between two states in electrical, pneumatic, or hydraulic circuits, among other applications. Although there has been extensive research on modeling, estimation, and control of these electromechanical systems, a gap remains in the analysis area. This paper addresses this gap by presenting an equilibrium and stability analysis to gain deeper insight into their bistability. This analysis leverages a hybrid dynamical model to obtain analytical expressions that relate the physical parameters to the switching conditions. These expressions are useful, e.g., for fundamental understanding, quick analyses, or design optimization. The results are discussed in depth and potential practical applications are explored. Finally, the analysis is validated with experimental results from a real device.

eess.SY↗