arXiv subjects

E. Fable

Publications and source records attributed to E. Fable.

12 recordsLinked to original sources

arXiv2026

Hollow toroidal rotation profiles in strongly electron heated H-mode plasmas in the ASDEX Upgrade tokamak

This work investigates toroidal momentum transport in type-I ELMy H-mode plasmas in the ASDEX Upgrade tokamak, focusing on the formation of hollow rotation profiles under strong electron cyclotron resonance heating (ECRH). Applying the established momentum transport analysis framework to a neutral beam injection (NBI) modulation experiment, momentum transport coefficients were inferred self-consistently. This was done for phases with dominant NBI heating and with additional strong ECRH, during which the rotation profile severely collapsed without significant changes in the externally applied torque. The experimental rotation profiles were accurately reproduced, confirming the robustness of the inferred diffusive, convective, and residual-stress contributions. While the Prandtl number and inward Coriolis pinch remained comparable between phases, the NBI+ECRH phase exhibited a strong counter-current intrinsic torque. Linear gyrokinetic simulations indicate a transition from ion-temperature-gradient (ITG) turbulence to an ITG-trapped-electron-mode (TEM) mixed regime under strong ECRH, consistent with the observed counter-current intrinsic torque and particle pinch behavior. Additional high-ECRH discharges with modified density demonstrated that hollow rotation profiles emerge from a balance between counter-current intrinsic torque and inward convective momentum transport, strongly influenced by the pedestal-top rotation level, which is dominantly set by variations in the pedestal-top density. These findings highlight the importance of intrinsic torque and inward convection for maintaining favorable rotation profiles in future low-torque tokamak scenarios and motivate further exploration of edge torque generation mechanisms.

physics.plasm-ph↗

arXiv2026

Flux pumping and bifurcated relaxations of helical core in 3D magnetohydrodynamic modelling of ASDEX Upgrade plasmas

Flux pumping was achieved in recent hybrid scenario experiments in the ASDEX Upgrade (AUG) tokamak, which is characterized by a sawtooth-free helical quiescent state and the anomalous radial redistribution of toroidal current density and poloidal magnetic flux. In this article, the self-regulation mechanism of the AUG core plasma during flux pumping is investigated at realistic parameters using the JOREK code based on the two-temperature, nonlinear, full magnetohydrodynamic (MHD) model. A key milestone in AUG flux pumping modelling is achieved by quantitatively reproducing the clamped current density and safety factor profiles in the plasma core, demonstrating the effectiveness of the dynamo effect in sustaining the flux pumping state. The dynamo term, that is of particular interest, is primarily generated by the pressure-gradient driven m/n = 1/1 quasi-interchange-like MHD instability. The work systematically extrapolates the parameter regimes of flux pumping from the above AUG base case by scanning dissipation coefficients and plasma beta. The simulation results reveal bifurcated plasma behaviours at different Hartmann numbers, including distinct states such as flux pumping (helical core with a flat current density), sawteeth (periodic kink-cycling), single crash (without subsequent cycle), and quasi-stationary magnetic island (peaked current density). Transitions from marginal flux pumping state to sawteeth are observed in long-term simulations. The relationships between system dissipation, plasma beta, and different plasma states are carefully analyzed. For practical purposes, the potential operational window for flux pumping, as determined by plasma density and temperature, is estimated. The modelling efforts advance the understanding of flux pumping and facilitate the development of a fast surrogate model for efficient evaluation of flux pumping.

physics.plasm-ph↗

arXiv2025

First global gyrokinetic profile predictions of ITER burning plasma

In this work, we present the first global gyrokinetic simulations of the ITER baseline scenario operating at 15 MA using GENE-Tango electrostatic and electromagnetic simulations. The modeled radial region spans close to the magnetic axis up to rho_tor = 0.6. Our results show a pronounced density peaking, moderated by electromagnetic fluctuations. The predicted fusion gain for this scenario is Q = 12.2, aligning well with ITER's mission objectives. We further characterize the turbulence spectra and find that electromagnetic modes, such as microtearing modes, kinetic ballooning modes, and Alfvenic ion temperature gradient modes at low binormal wave numbers, play a critical role in the core transport of this ITER scenario, necessitating high numerical resolution for accurate modeling. Local flux-tube simulations qualitatively reproduce the key features observed in the global gyrokinetic simulations but exhibit a much higher sensitivity to profile gradients, reflecting increased stiffness, likely due to the linearization of the equilibrium profiles and safety factor. Our study also reveals that the imposed external toroidal rotation profiles have a negligible impact on turbulent transport, as their magnitudes are substantially lower than the dominant linear growth rates. Furthermore, we demonstrate that the safety factor profile is of paramount importance: scenarios featuring flat q profiles with near-zero magnetic shear lead to the destabilization of kinetic ballooning modes in the plasma core, significantly enhancing turbulent transport and potentially degrading confinement. Finally, although electron temperature gradient turbulence initially appears large, sometimes exceeding ion-scale transport levels, it is ultimately quenched over long timescales by secular evolution of zonal flows, which are weakly damped under the very low collisionality conditions expected in ITER.

physics.plasm-ph↗

arXiv2024

FEQIS: A free-boundary equilibrium solver for integrated modeling of tokamak plasmas

A new axisymmetric equilibrium solver has been written, called FEQIS (Flexible EQuIlibrium Solver), which purpose is to be used inside integrated modeling of tokamak plasmas. The FEQIS code solves the Grad-Shafranov equation and the "circuit" equations for the external coils and passive conducting structures that are toroidally connected. The code has been specifically equipped with flexibility in choice of circuit connections, and a stripped-down numerical scheme for the solution of the Grad-Shafranov equation through a structure of multi-level simplifications which can be tested against the required accuracy.

physics.plasm-ph↗

arXiv2021

Electron runaway in ASDEX Upgrade experiments of varying core temperature

The formation of a substantial post-disruption runaway electron current in ASDEX Upgrade material injection experiments is determined by avalanche multiplication of a small seed population of runaway electrons. For the investigation of these scenarios, the runaway electron description of the coupled 1.5D transport solvers ASTRA-STRAHL is amended by a fluid-model describing electron runaway caused by the hot-tail mechanism. Applied in simulations of combined background plasma evolution, material injection, and runaway electron generation in ASDEX Upgrade discharge #33108, both the Dreicer and hot-tail mechanism for electron runaway produce only $\sim$ 3$~$kA of runaway current. In colder plasmas with core electron temperatures $T_\mathrm{e,c}$ below 9$~$keV, the post-disruption runaway current is predicted to be insensitive to the initial temperature, in agreement with experimental observations. Yet in hotter plasmas with $T_\mathrm{e,c} > 10~\mathrm{keV}$, hot-tail runaway can be increased by up to an order of magnitude, contributing considerably to the total post-disruption runaway current. In ASDEX Upgrade high temperature runaway experiments, however, no runaway current is observed at the end of the disruption, despite favourable conditions for both primary and secondary runaway.

physics.plasm-ph↗

arXiv2020

New high-confinement regime with fast ions in the core of fusion plasmas

The key result of the present work is the theoretical prediction and observation of the formation of a new type of transport barrier in fusion plasmas, called F-ATB (fast ion-induced anomalous transport barrier). As demonstrated through state-of-the-art global electrostatic and electromagnetic simulations, the F-ATB is characterized by a full suppression of the turbulent transport - caused by strongly sheared, axisymmetric $E \times B$ flows - and an increase of the neoclassical counterpart, albeit keeping the overall fluxes at significantly reduced levels. The trigger mechanism is shown to be a mainly electrostatic resonant interaction between supra-thermal particles, generated via ion-cyclotron-resonance heating, and plasma micro-turbulence. These findings are obtained by realistic simulations of the ASDEX Upgrade discharge $\#36637$ - properly designed to maximized the beneficial role of the wave-particle resonance interaction - which exhibits the expected properties of improved confinement produced by energetic particles.

physics.plasm-ph↗

arXiv2020

Self-consistent modeling of runaway electron generation in massive gas injection scenarios in ASDEX Upgrade

We present the first successful simulation of a induced disruption in ASDEX Upgrade from massive material injection (MMI) up to established runaway electron (RE) beam, thus covering pre-thermal quench, thermal quench and current quench (CQ) of the discharge. For future high-current fusion devices such as ITER, the successful suppression of REs through MMI is of critical importance to ensure the structural integrity of the vessel. To computationally study the interplay between MMI, background plasma response, and RE generation, a toolkit based on the 1.5D transport code coupling ASTRA-STRAHL is developed. Electron runaway is described by state-of-the-art reduced kinetic models in the presence of partially ionized impurities. Applied to argon MMI in ASDEX Upgrade discharge #33108, key plasma parameters measured experimentally, such as temporal evolution of the line averaged electron density, plasma current decay rate and post-CQ RE current, are well reproduced by the simulation presented. Impurity ions are transported into the central plasma by the combined effect of neoclassical processes and additional effects prescribed inside the $q = 2$ rational surface to explain experimental time scales. Thus, a thermal collapse is induced through strong impurity radiation, giving rise to a substantial RE population as observed experimentally.

physics.plasm-ph↗

arXiv2020

Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade

Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasilinear gyrokinetic code QuaLiKiz has been applied for successful predictions of core kinetic profiles in an ASDEX Upgrade H-mode discharge in the turbulence dominated region within the integrated modelling suite JETTO. Neoclassical contributions are calculated by NCLASS; auxiliary heat and particle deposition profiles due to NBI and ECRH prescribed from previous analysis with TRANSP. Turbulent and neoclassical contributions are insufficient in explaining main ion heat and particle transport inside the $q=1$ surface, necessitating the prescription of further transport coefficients to mimic the impact of MHD activity on central transport. The ion to electron temperature ratio at the simulation boundary at $\rho_\mathrm{tor} = 0.85$ stabilizes ion scale modes while destabilizing ETG modes when significantly exceeding unity. Careful analysis of experimental measurements using Gaussian process regression techniques is carried out to explore reasonable uncertainties. In following trace W impurity transport simulations performed with additionally NEO, neoclassical transport under consideration of poloidal asymmetries alone is found to be insufficient to establish hollow central W density profiles. Reproduction of these conditions measured experimentally is found possible only when assuming the direct impact of a saturated $(m,n)=(1,1)$ MHD mode on heavy impurity transport.

physics.plasm-ph↗

arXiv2018

Global gyrokinetic simulations of intrinsic rotation in ASDEX Upgrade Ohmic L-mode plasmas

Non-linear, radially global, turbulence simulations of ASDEX Upgrade (AUG) plasmas are performed and the nonlinear generated intrinsic flow shows agreement with the intrinsic flow gradients measured in the core of Ohmic L-mode plasmas at nominal parameters. Simulations utilising the kinetic electron model show hollow intrinsic flow profiles as seen in a predominant number of experiments performed at similar plasma parameters. In addition, significantly larger flow gradients are seen than in a previous flux-tube analysis (Hornsby et al {\it Nucl. Fusion} (2017)). Adiabatic electron model simulations can show a flow profile with opposing sign in the gradient with respect to a kinetic electron simulation, implying a reversal in the sign of the residual stress due to kinetic electrons. The shaping of the intrinsic flow is strongly determined by the density gradient profile. The sensitivity of the residual stress to variations in density profile curvature is calculated and seen to be significantly stronger than to neoclassical flows (Hornsby et al {\it Nucl. Fusion} (2017)). This variation is strong enough on its own to explain the large variations in the intrinsic flow gradients seen in some AUG experiments. Analysis of the symmetry breaking properties of the turbulence shows that profile shearing is the dominant mechanism in producing a finite parallel wave-number, with turbulence gradient effects contributing a smaller portion of the parallel wave-vector.

physics.plasm-ph↗

arXiv2017

Experimental observations and modelling of intrinsic rotation reversals in tokamaks

The progress made in understanding spontaneous toroidal rotation reversals in tokamaks is reviewed and current ideas to solve this ten-year-old puzzle are explored. The paper includes a summarial synthesis of the experimental observations in AUG, C-Mod, KSTAR, MAST and TCV tokamaks, reasons why turbulent momentum transport is thought to be responsible for the reversals, a review of the theory of turbulent momentum transport and suggestions for future investigations.

physics.plasm-ph↗

arXiv2013

Effect of sonic poloidal flows in determining flow and density asymmetries for trace impurities in the tokamak edge pedestal

The structure of poloidal and toroidal flows of trace impurities in the edge pedestal of tokamak plasmas is studied analytically and numerically. Parallel momentum balance is analysed upon retaining the following terms: poloidal and toroidal centrifugal forces (inertia), pressure force, electric force, and the friction force. It is shown that, when the poloidal flow is such to produce a properly defined Mach number of order unity somewhere on the flux surface, shock fronts can form. The shock fronts can modify the predicted asymmetry structures in both the flow and the density profile along the poloidal arc. Predictions of the theory are shown against experimental observations in the ASDEX Upgrade tokamak, showing good qualitative and quantitative agreement if the inertia term associated with the poloidal flow is retained.

physics.plasm-ph↗

arXiv2012

Validation of gyrokinetic modelling of light impurity transport including rotation in ASDEX Upgrade

Upgraded spectroscopic hardware and an improved impurity concentration calculation allow accurate determination of boron density in the ASDEX Upgrade tokamak. A database of boron measurements is compared to quasilinear and nonlinear gyrokinetic simulations including Coriolis and centrifugal rotational effects over a range of H-mode plasma regimes. The peaking of the measured boron profiles shows a strong anti-correlation with the plasma rotation gradient, via a relationship explained and reproduced by the theory. It is demonstrated that the rotodiffusive impurity flux driven by the rotation gradient is required for the modelling to reproduce the hollow boron profiles at higher rotation gradients. The nonlinear simulations validate the quasilinear approach, and, with the addition of perpendicular flow shear, demonstrate that each symmetry breaking mechanism that causes momentum transport also couples to rotodiffusion. At lower rotation gradients, the parallel compressive convection is required to match the most peaked boron profiles. The sensitivities of both datasets to possible errors is investigated, and quantitative agreement is found within the estimated uncertainties. The approach used can be considered a template for mitigating uncertainty in quantitative comparisons between simulation and experiment.

physics.plasm-ph↗