arXiv Science⌕ Search

arXiv subjects

Dong Ho Kang

Publications and source records attributed to Dong Ho Kang.

9 recordsLinked to original sources

Auditing Proxy-Based Validation Across Text Spans

Evaluation scores are often validated by their agreement with inexpensive proxy labels. When the score and the proxy are computed from the same text span, however, that agreement can arise from surface evidence the two share rather than from the semantic construct the proxy is meant to represent. We make the distinction explicit by declaring the score, its span, the proxy and the target construct as a validation contract, then re-evaluating that proxy rule strictly outside the scored span. In a controlled HotpotQA correctness experiment varying only the shared text boundary, the score agrees with its proxy far better than with correctness at a 50-character prefix: the gap is +0.184, collapsing to at most +0.045 from 120 characters onward. At that short prefix the score still predicts whether the answer string appears later (AUC 0.634) while an equivalence test places its agreement with correctness at chance, so the reported proxy agreement does not establish that the score ranks correctness. On OR-Bench, suppressing each model's recurring opening templates removes most of the score's association with the refusal proxy, while matched-volume deletion removes almost none and construct agreement stays at chance. Only three of eleven external contracts support the off-span control, and none of the routing studies we sampled released the generations it needs. We therefore ask that a proxy-based validation claim declare the span each label is read from, report the construct agreement beside the proxy agreement, and release the generations that let the proxy be re-read off the scored span.

cs.LG↗

When Residualization Helps an Audit: Format Effects, Slice Gains, and Their Limits

Evaluation scores used around LLM systems -- including reward models, rerankers, and LLM judges -- can track surface form instead of the quality they claim to measure. When presented with a terse correct solution and a commented buggy solution for the same MBPP problem, a public preference reward model selects the correct one no better than a coin flip (0.507). Subtracting the predictable surface component from such scores is increasingly common, but removal alone does not yield a more valid measurement: the removed component may carry construct-relevant signal, and residualization cannot tell which is which. Under designed interventions -- unit-test labels with comment-only edits -- residualization attenuates the reward model's format effects by about 0.12 on both correct and buggy code, while the correct-versus-buggy margins move by less than 0.01. In observational NLI and QA settings, we freeze a held-out replication before scoring and re-evaluate it using labels from disjoint annotators; this supports only a narrower conclusion: better agreement with the construct labels on a pre-declared slice where a surface-only predictor errs, not a repaired score. Full-population agreement falls in every observational setting with a reported positive slice gain, and within-question ranking falls in every such QA setting. When construct and surface features are entangled, residualization can decorrelate a score while degrading construct alignment, and, in a controlled model, configurations just as damaging to construct alignment pass every pre-adjustment check, so no committed gate is a guarantee. We assemble these distinctions into a reporting protocol whose outcomes, refusal included, state what an adjusted score may be claimed to show: an audit-time diagnostic reported beside the construct-alignment cost it incurs, never a replacement for the raw score.

cs.CL↗

LUMO: Designing Luminous Contact Morphology for Repeatable Whole-Finger Contact Observation

A low-impedance robot finger reports through joint torque how strongly it is loaded, but the same torque can arise from a small force near the fingertip or a large force near the joint. Resolving the force therefore requires knowing where along the finger contact occurred. LUMO makes that location externally observable. Embedded LEDs illuminate a compliant silicone pad, and contact deforms the pad so that light emerging from the finger's side changes in a pattern set by where the load acts. Because the same structure also carries the contact load, we optimize its cross-section, including the pad profile, rigid carrier, and lateral void, for two behaviors at once. Mechanically, the pad conforms under low preload while the carrier increasingly restricts further deformation as load rises. Optically, different contact locations produce separated responses on the finger's side. The search uses rigid--soft contact simulation, ray tracing, and multi-objective Bayesian optimization. Across two silicones, six contact locations, and 10- and 30-mm spherical indenters, the optimized morphologies improve neighboring-location separation relative to variation from re-establishing contact by \(15\)--\(59\%\). Estimating contact location from the optical response using the known LED spacing and combining it with joint torque gives \(1.44~\mathrm{N}\) normal-force MAE over 931 samples. In a two-finger hand, localized side responses appear on several links simultaneously during grasps.

cs.RO↗

A Bilateral Teleoperation Framework for Dexterous Manipulation

Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.

cs.RO↗

Knowledge-Based Zero-Replay Debugging of Multi-Agent LLM Traces

Reliable operation of multi-agent large language model (LLM) systems depends on debugging long execution traces, where the few causally decisive events are buried in unstructured logs of messages, routes, memory writes, and tool calls. The standard tool is counterfactual replay (rewind, edit, and re-run the trajectory to measure each event's effect), but its cost grows linearly with the number of candidate events, making exhaustive replay infeasible at scale. We frame trace debugging as a knowledge-based decision-support problem. Each trace is compiled into a structured event knowledge graph over routing, memory, tool-use, uncertainty, and latent evidence, and a calibrated predictor decides where a scarce replay budget should be spent. We do not propose a new replay oracle; we propose a method to predict its results without paying the replay cost. We formulate zero-replay counterfactual-effect prediction: given a trace under a fixed budget, predict which events the oracle would mark high-effect before any replay is performed. BranchPoint-Latent is a lightweight predictor over observable, structural, uncertainty, and latent features of the knowledge graph. Calibrated against a deterministic replay oracle across 37 trace families, a single learning-to-rank gradient-boosted predictor raises per-trace localization (Branch Recall@5) from 0.73 to 0.93 on held-out families at zero oracle-replay cost. Rather than claiming universal dominance, we characterize when cheap graph centrality suffices and when learned evidence is necessary. The result is an auditable, cost-efficient decision-support system for AI-reliability debugging, positioned explicitly on the cost-accuracy frontier with reproducible artifacts.

cs.SE↗

ARISTO Hand: Sensing-Driven Distal Hyperextension for Fine-Grained Manipulation

Manipulating thin objects requires precise contact geometry and reliable force perception, yet many anthropomorphic robotic hands lack the mechanical and sensing capabilities needed for such interactions. We present the ARISTO Hand, a tendon-driven robotic hand that integrates active distal hyperextension with a hybrid fingertip-sensing architecture that combines a rigid, nail-mounted force-torque sensor and a soft capacitive tactile array. Active hyperextension enables controlled fingertip engagement beyond the kinematic limits of standard flexion, increasing pull-out force by 2.76x for object thicknesses of 1-20 mm while preserving the nominal grasp capability. The rigid nail-mounted sensor provides reliable force measurements during edge contacts, where the sensitivity of proprioceptive force estimation degrades as the contact geometry approaches kinematic singularities. We validate the proposed architecture through quantitative force characterization and a multi-stage SD card extraction and insertion task. Video and supplementary materials are available at: https://aristohand.github.io

cs.RO↗

PLATO Hand: Shaping Contact Behavior with Fingernails for Precise Manipulation

We present the PLATO Hand, a dexterous robotic hand with a hybrid fingertip that combines a rigid fingernail, embedded distal phalanx, and compliant pulp to shape contact behavior during manipulation. \rrev{By mechanically organizing how contact is initiated, supported, and transmitted at the fingertip, this structure creates stable and task-relevant contact conditions across diverse object geometries and grasp orientations.} We develop a strain-energy-based bending--indentation model to guide the fingertip design and to explain how material stiffness and contact geometry govern deformation partitioning within the fingertip. \rrev{Experiments show improved pinch stability, improved fingernail-mediated dorsal-contact force transmission and proprioceptive observability}, and successful execution of edge-sensitive manipulation tasks, including paper singulation, card picking, and orange peeling. These results show that coupling a mechanically structured contact interface with a force-motion-transparent finger mechanism provides a principled approach to precise manipulation. Our project page is at: https://platohand.github.io

cs.RO↗

Pocket RAG: On-Device RAG for First Aid Guidance in Offline Mobile Environment

In disaster scenarios or remote areas, first responders often lose network connectivity when providing first aid. In such situations, server-based AI systems fail to provide critical guidance. To address this issue, we present a lightweight, mobile-based retrieval-augmented generation system for small language models (SLMs) that can run directly on Android devices. Our system integrates a mobile-friendly optimized pipeline featuring Hybrid RAG, selective compression, batched prompt decoding, and quantization caching. Despite the model's small size, our RAG-based system achieves 94.5\% accuracy for physical first aid and 97.0\% for psychological first aid. Additionally, we reduce response time from 14.2s to 3.7s, achieving a nearly 4x speedup. These results prove that our system is practical and can deliver reliable first aid guidance even without internet connectivity.

cs.NI↗

RPC: A Modular Framework for Robot Planning, Control, and Deployment

This paper presents an open-source, lightweight, yet comprehensive software framework, named RPC, which integrates physics-based simulators, planning and control libraries, debugging tools, and a user-friendly operator interface. RPC enables users to thoroughly evaluate and develop control algorithms for robotic systems. While existing software frameworks provide some of these capabilities, integrating them into a cohesive system can be challenging and cumbersome. To overcome this challenge, we have modularized each component in RPC to ensure easy and seamless integration or replacement with new modules. Additionally, our framework currently supports a variety of model-based planning and control algorithms for robotic manipulators and legged robots, alongside essential debugging tools, making it easier for users to design and execute complex robotics tasks. The code and usage instructions of RPC are available at https://github.com/shbang91/rpc.

cs.RO↗