arXiv subjects

Dojun Youm

Publications and source records attributed to Dojun Youm.

7 recordsLinked to original sources

arXiv2026

Search for Axion Dark Matter around \texorpdfstring{$15.6\,\mu\text{eV}$}{15.6 microeV} with a Broadly Tunable High-Temperature Superconducting Cavity

We report an axion dark matter search in the mass range of $15.30\text{--}15.85\,\mu\text{eV}$ using a broadly tunable high-temperature superconducting (HTS) haloscope. By soldering substrate-stripped rare-earth barium copper oxide (REBCO) films onto a copper shell, we achieved a quality factor 3--4 times higher than in copper cavities across its tuning band in an 8\text{-T} magnetic field. We set robust Frequentist 90\%~confidence-level exclusion limits on the axion--photon coupling down to 1.3 times the KSVZ coupling, while a complementary Bayesian analysis achieves KSVZ-level sensitivity.

hep-ex↗

arXiv2026

Multi-tesla operation of high-temperature superconducting cavities for accelerated axion dark matter searches

Axion haloscopes use radio-frequency cavities immersed in a magnetic field to search for dark-matter axions, which could resolve two central puzzles in fundamental physics: the strong charge-parity problem in quantum chromodynamics and the nature of dark matter. Multi-tesla fields trigger axion-to-photon conversion but induce severe vortex dissipation in standard superconductors, whereas copper cavities are limited by the anomalous skin effect ($Q \lesssim 10^5$). Here, we overcome these barriers by introducing a pole-to-pole 3-dimensional cavity architecture constructed from strain-controlled, mechanically delaminated rare-earth barium copper oxide (REBCO) tapes. By selectively stripping the lossy metallic substrate while utilizing the copper stabilizer as a "conductive backing" we convert the longitudinal assembly gaps into waveguides below cutoff, effectively suppressing cross-seam RF leakage. Employing a two-track strategy, we first unveiled the intrinsic high-field potential of the material with a 5.4 GHz resonant cavity, achieving an unloaded quality-factor ($Q_0$) of $1.4 \times 10^7$ in an 8 T magnetic field, exceeding conventional copper baselines by two orders of magnitude. Second, prioritizing practical haloscope integration, we engineered a tunable, volume-maximized 2.3 GHz pathfinder cavity. Deployed in the Pilot Axion Cavity Experiment at the Center for Axion and Precision Physics Research (CAPP-PACE), this system achieved a 180 mK noise temperature and a 5-fold $Q$ enhancement over copper, cumulatively delivering a $\sim$8.4-fold scan-rate acceleration.

hep-ex↗

arXiv2021

First prototype of a biaxially textured YBa$_{2}$Cu$_{3}$O$_{7-x}$ microwave cavity in a high magnetic field for dark matter axion search

A high-quality factor microwave resonator in the presence of a strong magnetic field could have a wide range of applications, such as axion dark matter searches where the two aspects must coexist to enhance the experimental sensitivity. We introduce a polygon-shaped cavity design with bi-axially textured YBa$_{2}$Cu$_{3}$O$_{7-x}$ superconducting tapes covering the entire inner wall. Using a 12-sided polygon cavity, we obtain substantially improved quality factors of the TM$_{010}$ mode at 6.9 GHz at 4 K with respect to a copper cavity and observe no considerable degradation in the presence of magnetic fields up to 8 T. This corresponds to the first demonstration of practical applications of superconducting radio frequency technology for axion and other research areas requiring low loss in a strong magnetic field. We address the importance of the successful demonstration and discuss further improvements.

physics.ins-det↗

arXiv2020

Superconducting cavity in a high magnetic field

A high Q-factor microwave resonator in a high magnetic field could be used in a wide range of applications, especially for enhancing the scanning speed in axion dark matter research. In this letter, we introduce a polygon-shaped resonant cavity with commercial YBCO tapes covering the entire inner wall. We demonstrated that the maximum Q-factor (TM$_{010}$, 6.93 GHz) of the superconducting YBCO cavity was about 6 times higher than that of a copper cavity and showed no significant degradation up to 8 T at 4 K. This is the first indication of the possible applications of HTS technology to the research areas requiring low loss in a strong magnetic field at high radio frequencies.

physics.app-ph↗

arXiv2019

Maintaining high Q-factor of superconducting YBa$_2$Cu$_3$O$_{7-x}$ microwave cavity in a high magnetic field

A high Q-factor microwave resonator in a high magnetic field could be of great use in a wide range of fields, from accelerator design to axion dark matter search. The natural choice of material for the superconducting cavity to be placed in a high field is a high temperature superconductor (HTS) with a high critical field. The deposition, however, of a high-quality, grain-aligned HTS film on a three-dimensional surface is technically challenging. We have fabricated a polygon-shaped resonant cavity with commercial YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) tapes covering the entire inner wall and measured the Q-factor at 4 K at 6.93 GHz as a function of an external DC magnetic field. We demonstrated that the high Q-factor of the superconducting YBCO cavity showed no significant degradation from 1 T up to 8 T. This is the first indication of the possible applications of HTS technology to the research areas requiring a strong magnetic field at high radio frequencies.

physics.ins-det↗

arXiv2019

High Quality Factor High-Temperature Superconducting Microwave Cavity Development for the Dark Matter Axion Search in a Strong Magnetic Field

We demonstrate a superconducting (SC) microwave (mw) cavity that can accelerate the dark matter search by maintaining superconductivity in a high DC magnetic field. We used high-temperature superconductor (HTSC) yttrium barium copper oxide (YBCO) with a phase transition temperature of 90K to prevent SC failure by the magnetic field. Since the direct deposition of HTSC film on the metallic mw cavity is very difficult, we used the commercial HTSC tapes which are flexible metallic tapes coated with HTSC thin films. We fabricated resonating cavity ($f_{TM010}$ ~ 6.89 GHz) with a third of the inner wall covered by YBCO tapes and measured the quality factor (Q factor) at 4K temperature, varying the DC magnetic field from 0 to 8 tesla. There was no significant quality (Q) factor drop and the superconductivity was well maintained even in 8 tesla magnetic field. This implies the possibility of good performance of HTSC mw resonant cavity under a strong magnetic field for axion detection.

physics.ins-det↗

arXiv2016

Beyond Bean's critical state model: On the origin of paramagnetic Meissner effect

Solving phenomenological macroscopic equations instead of microscopic Ginzburg-Landau equations for superconductors is much easier and can be advantageous in a variety of applications. However, till now, only Bean's critical state model is available for the description of irreversible properties. Here we propose a plausible overall macroscopic model for both reversible and irreversible properties, combining London theory and Bean's model together based on superposition principle. First, a simple case where there is no pinning is discussed, from which a microscopic basis for Bean's model is explored. It is shown that a new concept of 'flux share' is needed when the field is increased above the lower critical field. A portion of magnetic flux is completely shielded, named as 'Meissner share' and the rest penetrates through vortices, named as 'vortices share'. We argue that the flux shares are irreversible if there is pinning. It is shown that the irreversible flux shares can be the reason for observed peculiar reversible magnetization behavior near zero field. The overall macroscopic model seems to be valuable for the analysis of fundamental physical properties as well. As an example, it is shown the origin of paramagnetic Meissner effect can be explained by the phenomenological macroscopic model.

cond-mat.supr-con↗