arXiv subjects

Dirk O. Gericke

Publications and source records attributed to Dirk O. Gericke.

9 recordsLinked to original sources

arXiv2026

Assessing the Projector Augmented-Wave Method for Stopping Power Calculations

The stopping power of charged particles is investigated using time-dependent density functional theory (TDDFT). Such simulations are made possible by recent advances in computational resources and numerical implementations of this first-principles method. In practice, DFT simulations widely employ the projector augmented-wave (PAW) method to approximate all-electron behaviour, but the implications of the PAW approximation for non-adiabatic stopping simulations remain insufficiently explored. Here, the suitability of the PAW method for stopping power simulations is evaluated. A workflow for generating and selecting PAW datasets tailored to these simulations is developed, enabling systematic optimisation of augmentation radii and projector constructions. The approach is applied to proton stopping in FCC aluminium, demonstrating how dataset design influences stopping predictions, and enabling an investigation of crystal channelling effects on charged-particle transport.

physics.plasm-ph↗

arXiv2026

Reconciling chemical models of X-ray Thomson Scattering with the Bethe $f$-sum rule

X-ray Thomson scattering (XRTS) is a key diagnostic for high-energy-density plasmas, which can exhibit significant quantum effects even at elevated temperatures. XRTS experiments are commonly interpreted using the Chihara decomposition, that was derived in the chemical picture and, thus, separates contributions from bound and free electrons. Despite being the de-facto standard for analysing measurements, a well-known shortcoming is that the standard bound-state treatment in the form of the impulse approximation fails to satisfy fundamental theoretical constraints, most notably the Bethe $f$-sum rule (BFSR). The problem arises due to the usage of plane waves in the impulse approximation as well as non-negligible contributions from bound-bound transitions. In this work, we present a minimal analytical extension of the Chihara decomposition of the dynamic structure factor for matter in the ground state, using hydrogenic bound-free and bound-bound transitions. We demonstrate that compliance with the BFSR is only achieved when both bound-bound transitions are explicitly included and an exact treatment of the bound-free contribution is applied. Finally, detector ray-tracing simulations for atomic hydrogen demonstrate experimentally detectable deviations from the standard Chihara model. The model will be made available in the open source XRTS library xDAVE [Bellenbaum et al., Phys. Plasmas (in print), arxiv:2604.27237].

physics.plasm-ph↗

arXiv2026

X-Ray Diagnostics Analysis Verification and Exploration (xDAVE) Code for the Prediction and Interpretation of X-Ray Thomson Scattering Experiments

X-ray Thomson scattering (XRTS) is a common diagnostic used in the warm dense matter (WDM) regime to estimate plasma parameters like density, temperature and charge state. Experimental analysis typically relies on a forward model to obtain estimates for these parameters, as the measured spectrum is a convolution of the dynamic structure factor (DSF) and the source-instrument function. The Chihara decomposition, where the spectrum is separated into contributions from bound and free electrons, is commonly used to estimate DSFs in the WDM regime, as it allows for the fast calculation of DSFs and therefore can easily be applied in a large-scale parameter optimization. Due to the limited availability of XRTS codes, in this work we present the ``\textbf{X}-ray \textbf{D}iagnostics, \textbf{A}nalysis, \textbf{V}erification and \textbf{E}xploration`` (\texttt{xDAVE}) code, designed to quickly estimate DSFs using the Chihara decomposition and analyse experimental spectra. The code is validated by re-analysing an experiment with isochorically heated beryllium at the OMEGA Laser Facility. In addition, we demonstrate the applicability of the code to plan experiments and predict scattering spectra through the coupling to a ray-tracing code. Lastly, the importance of accounting for the energy-dependence of spectrometer instrument functions is demonstrated by comparing ray-tracing simulations to the standard convolution for strongly compressed Beryllium shots at the National Ignition Facility similar to previously published results.

physics.plasm-ph↗

arXiv2026

Overview of X-ray Thomson scattering measurements of extreme states of matter

Since its first successful applications in the early 2000s, x-ray Thomson scattering (XRTS) has emerged as one of the most successful tools for the diagnostics of extreme states of matter in the laboratory. By sampling the dynamic structure factor of the electrons, XRTS is capable of giving detailed insights into the atomic-scale physics of the matter probed. Moreover, thermodynamic parameters, like the mass density, temperature, and ionization state, are routinely inferred from XRTS measurements, providing a comprehensive characterization of the sample probed. In addition, the dynamic structure factor is of considerable interest in its own right as it contains information on other effects such as the plasmon shift, miscibility between species, electronic states and potential transitions between these states. In this work, we provide an extensive overview of previous XRTS experiments at both traditional laser and X-ray free electron laser facilities, including information about the probed material (elements, conditions), scattering geometry, analysis methods as well as corresponding references. In addition, we briefly discuss the advantages and shortcomings of widely used analysis methods for XRTS spectra and reflect on upcoming future developments in XRTS experiments and theory.

physics.plasm-ph↗

arXiv2026

Electronic Signature of Melting Onset in Polycrystalline Copper at Extreme Conditions

Ultrafast melting is fundamentally a structural transition of the ionic lattice, but this rearrangement also reshapes the electronic properties by changing the energy landscape and scattering mechanisms. Although the electrons react almost instantaneously, it is not a priori clear how much lattice disorder is required for a significant response. Here, we show that the onset of melting already produces a clear electronic signature in polycrystalline copper. Using single-shot terahertz time-domain spectroscopy on thin films excited over a wide range of laser fluences, we infer the transient conductivity during the first picoseconds after excitation. The data, supported by two-temperature molecular-dynamics simulations, show that before melting, electron transport is substantially limited by grain-boundary scattering and that melting strongly suppresses this channel. As melting begins at these interfaces, we observe a transient increase in the conductivity that directly marks the onset of the phase transition. More broadly, these results show that ionic and electronic relaxation stages are closely coupled in nonequilibrium laser-driven matter and that optical measurements can resolve distinct stages of melting.

cond-mat.mtrl-sci↗

arXiv2025

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

physics.plasm-ph↗

arXiv2024

Model-free Rayleigh weight from x-ray Thomson scattering measurements

X-ray Thomson scattering (XRTS) has emerged as a powerful tool for the diagnostics of matter under extreme conditions. In principle, it gives one access to important system parameters such as the temperature, density, and ionization state, but the interpretation of the measured XRTS intensity usually relies on theoretical models and approximations. In this work, we show that it is possible to extract the Rayleigh weight -- a key property that describes the electronic localization around the ions -- directly from the experimental data without the need for any model calculations or simulations. As a practical application, we consider an experimental measurement of strongly compressed Be at the National Ignition Facility (NIF) [D\"oppner \emph{et al.}, \textit{Nature} \textbf{618}, 270-275 (2023)]. In addition to being interesting in their own right, our results will open up new avenues for diagnostics from \emph{ab initio} simulations, help to further constrain existing chemical models, and constitute a rigorous benchmark for theory and simulations.

physics.plasm-ph↗

arXiv2024

Ionisation Calculations using Classical Molecular Dynamics

By performing an ensemble of molecular dynamics simulations, the model-dependent ionisation state is computed for strongly interacting systems self-consistently. This is accomplished through a free energy minimisation framework based on the technique of thermodynamic integration. To illustrate the method, two simple models applicable to partially ionised hydrogen plasma are presented in which pair potentials are employed between ions and neutral particles. Within the models, electrons are either bound in the hydrogen ground state or distributed in a uniform charge-neutralising background. Particular attention is given to the transition between atomic gas and ionised plasma, where the effect of neutral interactions is explored beyond commonly used models in the chemical picture. Furthermore, pressure ionisation is observed when short range repulsion effects are included between neutrals. The developed technique is general, and we discuss the applicability to a variety of molecular dynamics models for partially ionised warm dense matter.

physics.plasm-ph↗

arXiv2023

Speed of sound in methane under conditions of planetary interiors

We present direct observations of acoustic waves in warm dense matter. We analyze wave-number- and energy-resolved x-ray spectra taken from warm dense methane created by laser heating a cryogenic liquid jet. X-ray diffraction and inelastic free-electron scattering yield sample conditions of 0.3$\pm$0.1 eV and 0.8$\pm$0.1 g/cm$^3$, corresponding to a pressure of $\sim$13 GPa. Inelastic x-ray scattering was used to observe the collective oscillations of the ions. With a highly improved energy resolution of $\sim$50 meV, we could clearly distinguish the Brillouin peaks from the quasielastic Rayleigh feature. Data at different wave numbers were utilized to derive a sound speed of 5.9$\pm$0.5 km/s, marking a high-temperature data point for methane and demonstrating consistency with Birch's law in this parameter regime.

physics.plasm-ph↗