arXiv subjects

Dionysios Moutevelis

Publications and source records attributed to Dionysios Moutevelis.

8 recordsLinked to original sources

arXiv2026

Quantifying Power to Voltage and Frequency Dynamics for Oscillation Propagation Assessment

The integration of Inverter-Based Resources (IBRs) into power systems introduces multi-timescale dynamics and oscillations which may propagate to distant areas and endanger the safe system operation. These oscillations pose a significant challenge as their source, frequency, and propagation pathways are often challenging to identify in large interconnected systems, comprising numerous synchronous machines and IBRs. For the above reasons, analytical tools that identify the sensitivity of the system to oscillations within a large frequency spectrum, affecting both voltage and frequency variables across various network locations, are of interest. This paper addresses this topic by introducing a frequency-domain framework based on linear analysis, which characterizes the sensitivity to oscillations of each network bus voltage and of each generation unit frequency. Within this framework, two quantitative indicators are proposed, namely the Frequency Sensitivity Index (FSI) and Voltage Sensitivity Index (VSI). These indexes are derived analytically from the transfer functions which relate the active and reactive power injections to each bus with the voltage and frequency variables across the network, derived from the linear Electromagnetic Transient (EMT) power system model. The proposed indices quantify the sensitivity of the system to oscillations of different type and frequency, providing insights for both oscillation detection and propagation analysis. The methodology is applied to a case study based on the modified IEEE 68-bus benchmark system under partial and full IBR penetration, while its accuracy is validated through EMT time-domain simulations using linear and nonlinear models developed in Matlab/Simulink environment.

eess.SY↗

arXiv2026

Equivalent modelling for the fundamental frequency dynamic variation: State-space, impedance, and power-frequency representations

Stability of power electronic converters connected to power grids is commonly assessed by using the impedance criterion while the stability of power grids is typically analysed by using the network state-space representation. It is known that the impedance criterion may lead to erroneous results if the grid frequency dynamics are not considered while eigenvalue analysis is considered as a reliable method for system stability assessment. The equivalence between these two methods has been recently explored, without considering the effect of network frequency variations. Additionally, the link of the impedance criterion with the power-frequency dynamics of power systems also remains largely unexplored. In this paper, the equivalency between the impedance method considering the grid frequency dynamics and the conventional eigenvalue analysis is demonstrated. In addition, the dynamic interaction between the apparent power flow and the network fundamental frequency is formulated and its link with the impedance representation is shown. It is demonstrated that, by using the impedance representation with the network frequency as an additional input port, the network frequency perturbation plot (NFP) can be intuitively expressed by using quantities consistent with the impedance analysis framework. The main findings are verified using detailed numerical simulations of two representative systems.

eess.SY↗

arXiv2026

Fault-Ride-Through Coordination Strategy for Offshore AC Islands with Multi-Infeed HVDC Interconnections

Large-scale offshore Wind Farms (WFs) are considered key assets towards realizing a sustainable power system. These systems are often configured as offshore AC islands and their integration largely depends on the High-Voltage-Direct-Current (HVDC) technology. This topology, while it enables cost-effective transmission over large offshore distances, may lead to operational challenges. Specifically, the operation of offshore AC islands during faults and the grid code requirement fulfillment are identified as a major challenges for their large-scale deployment. To address this pressing issue, a comprehensive coordination control strategy for the different participating converters in multi-infeed AC offshore islands during Fault Ride Through (FRT) operation is presented in this work. The proposed strategy introduces advanced control functions in the FRT schemes of both the HVDC and WF converters, such as zero active and reactive power injection during faults, as well as post-fault active power droop control coordination to tackle power imbalances. The proposed FRT coordination strategy is validated through both extensive simulations in PSCAD/EMTDC, as well as with Power Hardware-in-the-Loop (PHIL) experimental results, considering both AC and DC faults.

eess.SY↗

arXiv2025

A Matlab-based Toolbox for Automatic EMT Modeling and Small-Signal Stability Analysis of Modern Power Systems

The intensive integration of power converters is changing the way that power systems operate, leading to the emergence of new types of dynamic phenomena and instabilities. At the same time, converters act as an interface between traditional AC grids and their more recent DC counterparts, giving rise to hybrid AC/DC networks. These conditions increase the necessity for stability analysis tools that can simultaneously account for the newly-introduced dynamic phenomena and can also be applied for the stability study of hybrid networks. This paper presents a Matlab-based toolbox for small-signal analysis of hybrid AC/DC power systems considering electromagnetic-transient (EMT) models. The toolbox allows the automatized modeling of the system from the input data and offers options for modal, impedance and passivity analyses. In the paper, the structure and internal processes of the toolbox are duly discussed, together with all its features, both main and complementary. Its capabilities for stability analysis are demonstrated via comprehensive case studies of converter-based system of various size and topology.

eess.SY↗

arXiv2025

Voltage Stability and Control of Electrical Distribution Systems with High Penetration of Power Electronic Converters

Power systems are currently undergoing a rapid paradigm change in their operation. Centralised energy production is being replaced by a number of Distributed Generation (DG) units that are placed at different locations and voltage levels in power networks. These distributed units are mostly based on renewable energy technologies, like wind turbines and photovoltaic cells and are commonly interfaced to the grid via power electronic converters. These sources reduce energy system dependency on conventional generation units based on fossil fuels. At the same time, this shift introduces technical challenges for the safe and reliable operation of electricity network since DG sources do not inherently provide the grid regulation services of conventional, centralised generation units. Moreover, the increased penetration of renewable energy sources and their converter-based interfaces is creating voltage deviation and voltage stability issues in distribution networks. These issues range from overvoltages during hours of peak renewable generation, reverse power flows and sudden voltage drops due to the variable nature of renewable energy production. All of the above jeopardise the reliable operation of the distribution networks that were not originally designed to accommodate for these effects. The objective of this thesis is to propose novel techniques for the accurate assessment of the DG impact on voltage stability in distribution net works and investigate how the control capabilities of converter-based interfaces of DG units can be harnessed to improve stability margins and overall system robustness and performance.

eess.SY↗

arXiv2025

A Dynamic Similarity Index for Assessing Voltage Source Behaviour in Power Systems

Due to the fundamental transition to a power electronic dominated power system, the increasing diversity of dynamic elements underscores the need to assess their similarity to mature electrical engineering models. This article addresses the concept of the Dynamic Similarity Index (DSI) for its use in, power electronics-dominated networks. The DSI is a multipurpose tool developed to be used by different stakeholders (e.g., converter manufacturers and system operators). Such an index is calculated per frequency, which serves to anticipate potential differences in particular frequency ranges of interest between the model under study and the reference model. Within the scope of this study, the dynamic similarity of inverter-based generators to an ideal voltage source behind an impedance is assessed, due to the relevance of this fundamental circuit in the representation of generation units in power system studies. The article presents two potential applications based on this mathematical framework. First, for manufacturers to evaluate control performance compared to a reference model and second, it enables operators to diagnose buses with voltage vulnerability based on a user-defined reference Short-Circuit Ratio (SCR) value. The DSI results for these two case studies are validated using Matlab Simulink simulations.

eess.SY↗

arXiv2023

Taxonomy of Power Converter Control Schemes based on the Complex Frequency Concept

This paper proposes a taxonomy of power converter control schemes based on the recently proposed concept of complex frequency. This quantity captures local frequency variations due to the change of both the phase angle and amplitude of bus voltages and current injections. The paper derives the analytical expressions of the link between complex power variations and complex frequency of each converter controller as well as the identification of critical control parameters. The main contribution of this work is to provide a general framework that allows classifying converters synchronization mechanisms and controllers. This framework also allows comparing converters with synchronous machines. To validate the theoretical results, extensive simulations are performed using a modified version of the WSCC 9-bus system. Examples of how the theoretical formulations of the paper can be used to improve power converter control in power system applications are showcased.

eess.SY↗

arXiv2023

Recursive Secondary Controller for Voltage Profile Improvement Based on Primary Virtual Admittance Control

This paper proposes a recursive, virtual admittance based, secondary controller for DG units that improves the voltage profile in distribution networks. First, the adaptation of the virtual admittance concept for the goal of voltage regulation is explained. Then, a recursive secondary controller is developed to periodically update the virtual admittance gains. The controller is formulated as an optimization problem with current and stability limitations as constraints. Measurements across the grid, transmitted through low-bandwidth communications, are used to simplify the calculations, resulting in a recursive algorithm. Weight vectors are included in the objective function to allow participation flexibility of each converter. Results show that the primary virtual admittance controller is able to mitigate over- and under-voltages in steady state and under transient conditions. Subsequently, the secondary controller is shown to further improve the voltage profiles across the grid. Experimental results obtained from a laboratory environment, comprising three DG units and a grid emulator, validate the functionality of the complete control structure.

eess.SY↗