arXiv subjects

Dingcheng Yang

Publications and source records attributed to Dingcheng Yang.

At least 19 recordsLinked to original sources

arXiv2026

ARIES-Mission2: A Zero-Shot Vision-Language-Action Framework for Fast Large-Scale Aerial Mission Generation

Multimodal Large Language Models (MLLMs) have shown strong semantic understanding capabilities, but their direct use in low-altitude Unmanned Aerial Vehicle (UAV) mission generation remains limited by weak spatial optimization and inefficient route planning. To address this issue, we propose ARIES-Mission2, a zero-shot Vision-Language-Action (VLA) framework that decouples visual-semantic perception from physical route optimization. Given natural-language instructions and satellite imagery, ARIES-Mission2 first uses DeepSeek-V3 for task parsing and Molmo-7B for zero-shot target grounding, and then converts detected pixel locations into GPS waypoints through geospatial interpolation. To reduce the redundant backtracking caused by raw VLM-generated visiting orders, the back end formulates multi-target UAV traversal as a Traveling Salesperson Problem (TSP) and compares four candidate routes, including the raw VLM order and the routes optimized by PSO, GPSO, and IPSO. The minimum-cost closed-loop route is then selected for mission generation. Experiments on the UAV-VLPA-nano-30 benchmark show that ARIES-Mission2 achieves a total flight distance of 62.43 km, reducing the route length by 21.6% compared with the unoptimized VLA baseline (79.66 km) and by 9.5% compared with manual human planning (69.00 km). The complete 30-task workflow takes 575.40 s, averaging 19.18 s per task, which is approximately 3.6 times faster than human expert planning. Component-level timing shows that VLM inference dominates the runtime with 19.02 s per task, while the TSP solver requires only 0.16 s per task. Scalability analysis further indicates that the TSP module maintains lower growth in computation time as the number of targets increases.

cs.CE↗

arXiv2026

AttentionCap: Transformer Based Capacitance Matrix Learning Toward Full-Chip Extraction

As capacitance extraction accuracy of rule-based pattern matching becomes difficult to sustain at advanced nodes, a growing trend emerges to develop deep-learning-based 2D capacitance models. However, existing MLP- and CNN-based methods constrain their input to fixed metal-layer combinations in a specific process node, limiting their usability in practice. Recognizing the inherent similarity between capacitance matrix and the prevailing attention mechanism, we propose AttentionCap, a customized Transformer for capacitance matrix learning, with a Gram representation framework, a physics-aligned symmetric-attention output layer, and a novel normalized Laplacian loss. We also introduce a process-node embedding to enable multi-node learning. Trained on synthetic data, AttentionCap attains 0.67\%/3.99\% self/coupling-capacitance error on unseen real designs under a multi-layer and multi-node setting, surpassing the CNN-Cap baseline with 4.6$\times$/5.7$\times$ lower self/coupling error and 192$\times$ faster inference speed. A pretrained AttentionCap accurately transfers to an unseen node with only 5K samples and 4K finetuning steps. With sufficient accuracy on unseen real designs and strong transferability to new process nodes, AttentionCap offers highly practical value for modern EDA workflows. Code and data are available at https://github.com/THU-numbda/AttentionCap.

cs.LG↗

arXiv2026

KIO-planner: Attention-Guided Single-Stage Motion Planning with Dual Mapping for UAV Navigation

Autonomous UAV flight in confined, wall-dense environments requires low-latency and reliable motion planning under strict safety constraints. Traditional optimization-based planners suffer from mapping latency and easily fall into local minima when navigating through dense structural obstacles. Meanwhile, existing end-to-end learning methods struggle to extract fine-grained geometric features from raw depth images and lack hard kinodynamic constraints, leading to unpredictable collisions near walls. To address these issues, we propose KIO-planner, an attention-guided single-stage trajectory planning framework. First, we integrate a Convolutional Block Attention Module (CBAM) into the perception backbone to adaptively focus on critical structural edges and traversable space. Second, we introduce a novel Dual Mapping mechanism--comprising physical bounds activation and a deterministic Geometric Safety Shield in the depth-pixel space--to enforce kinodynamic feasibility and collision-free flight without global map fusion. Extensive high-fidelity simulated experiments demonstrate that KIO-planner enables highly agile navigation at speeds up to 3.0 m/s. Compared to the state-of-the-art baseline, KIO-planner achieves lower inference latency (approximately 24 ms) and generates significantly smoother trajectories, reducing control cost by 28.4%. Most notably, our Dual Mapping substantially increases the worst-case safety margin, measured by minimum distance to obstacles, from 0.48 m to 0.76 m, ensuring fast, smooth, and safer navigation in highly constrained environments.

cs.RO↗

arXiv2026

SAGA: A Robust Self-Attention and Goal-Aware Anchor-based Planner for Safe UAV Autonomous Navigation

Agile unmanned aerial vehicle (UAV) navigation in cluttered environments demands a planning architecture that is both computationally efficient and structurally expressive enough to reason over multiple feasible motions. This paper presents SAGA, a robust self-attention and goal-aware anchor-based planner for safe UAV autonomous navigation. SAGA formulates local planning as a one-stage joint regression-and-ranking problem over a fixed lattice of motion anchors. Given a depth image and a body-frame motion state, the planner predicts refined terminal states and planning scores for all anchors in a single forward pass, after which the best candidate is decoded into a dynamically feasible trajectory. The key idea of SAGA is to transform anchor-aligned features into geometry-aware tokens and perform cross-anchor global reasoning with self-attention. To preserve directional structure in the token space, we further introduce a polar positional encoding derived from anchor yaw and pitch. In addition, a goal-aware modulation module injects velocity, acceleration, and target information into the token representation before final score prediction. Experiments in cluttered pillar-map environments under maximum speed settings of 2.0, 3.0, and 4.0~m/s show that SAGA consistently achieves a 100\% success rate, while YOPO drops from 90.91\% to 62.50\%, Ego-planner from 71.43\% to 52.63\%, and Fast-planner from 52.63\% to 38.46\%. Under the 4.0~m/s maximum speed setting, SAGA also improves average safety from 1.9843~m to 2.3888~m and minimum safety from 0.4390~m to 0.7576~m over YOPO, while reducing total flight time from 40.4631~s to 27.4901~s. The comparison with SAGA w/o PPE further shows that explicit polar positional encoding is critical for stable cross-anchor reasoning and safe passage selection in cluttered scenes.

cs.RO↗

arXiv2025

Deep-Learning-Based Pre-Layout Parasitic Capacitance Prediction on SRAM Designs

To achieve higher system energy efficiency, SRAM in SoCs is often customized. The parasitic effects cause notable discrepancies between pre-layout and post-layout circuit simulations, leading to difficulty in converging design parameters and excessive design iterations. Is it possible to well predict the parasitics based on the pre-layout circuit, so as to perform parasitic-aware pre-layout simulation? In this work, we propose a deep-learning-based 2-stage model to accurately predict these parasitics in pre-layout stages. The model combines a Graph Neural Network (GNN) classifier and Multi-Layer Perceptron (MLP) regressors, effectively managing class imbalance of the net parasitics in SRAM circuits. We also employ Focal Loss to mitigate the impact of abundant internal net samples and integrate subcircuit information into the graph to abstract the hierarchical structure of schematics. Experiments on 4 real SRAM designs show that our approach not only surpasses the state-of-the-art model in parasitic prediction by a maximum of 19X reduction of error but also significantly boosts the simulation process by up to 598X speedup.

cs.LG↗

arXiv2025

Analytical design of acoustic metasurface cells incorporating meander-line and Helmholtz resonators

Gradient acoustic metasurfaces have shown strong potential for manipulation of acoustic waves across the audible and ultrasonic frequency ranges. The key challenge in designing acoustic metasurfaces is to create a series of sub-wavelength unit cells that match the desired phase response. The most commonly used geometry is a series of Helmholtz resonators, side-coupled to a narrow channel. Despite the existence of a closed-form solution for 3 side-coupled resonators, most reported designs instead make use of 4 or more resonators, which require opaque, optimization-based design approaches. We show that the limiting factor in designs based on side-coupled resonators is the requirement to use elements with a positive imaginary part of impedance, which implies a Helmholtz resonator operating above its fundamental resonance - contradicting the requirement for sub-wavelength volume. We show that by replacing some of the Helmholtz resonators with meander-line elements, the required impedance values can readily be realized within a sub-wavelength volume. The metasurface design approach is demonstrated for a lens operating at 3 kHz and verified numerically. Furthermore, incorporating meander-line elements leads to improved broadband focusing performance, even when no explicit dispersion engineering is included in the design. As this design includes narrow channels, we include the effects of thermo-viscous losses in our modeling, and confirm that our design still gives superior performance to the reference design using only Helmholtz resonators. Our design is expected to lead to more optimal performance of acoustic metasurface designs, and the ability to make use of a closed-form design formula is expected to facilitate the analysis of fundamental performance bounds and enable more explicit achromatic design processes.

physics.app-ph↗

arXiv2024

Energy Efficient and Balanced Task Assignment Strategy for Multi-UAV Patrol Inspection System in Mobile Edge Computing Network

This paper considers a patrol inspection scenario where multiple unmanned aerial vehicles (UAVs) are adopted to traverse multiple predetermined cruise points for data collection. The UAVs are connected to cellular networks and they would offload the collected data to the ground base stations (GBSs) for data processing within the constrained duration. This paper proposes a balanced task assignment strategy among patrol UAVs and an energy-efficient trajectory design method. Through jointly optimizing the cruise point assignment, communication scheduling, computational allocation, and UAV trajectory, a novel solution can be obtained to balance the multiple UAVs' task completion time and minimize the total energy consumption. Firstly, we propose a novel clustering method that considers geometry topology, communication rate, and offload volume; it can determine each UAV's cruise points and balance the UAVs' patrol task. Secondly, a hybrid Time-Energy traveling salesman problem is formulated to analyze the cruise point traversal sequence, and the energy-efficient UAV trajectory can be designed by adopting the successive convex approximation (SCA) technique and block coordinate descent (BCD) scheme. The numerical results demonstrate that the proposed balanced task assignment strategy can efficiently balance the multiple UAVs' tasks. Moreover, the min-max task completion time and total energy consumption performance of the proposed solution outperform that of the current conventional approach.

cs.NI↗

arXiv2024

NAS-Cap: Deep-Learning Driven 3-D Capacitance Extraction with Neural Architecture Search and Data Augmentation

More accurate capacitance extraction is demanded for designing integrated circuits under advanced process technology. The pattern matching approach and the field solver for capacitance extraction have the drawbacks of inaccuracy and large computational cost, respectively. Recent work \cite{yang2023cnn} proposes a grid-based data representation and a convolutional neural network (CNN) based capacitance models (called CNN-Cap), which opens the third way for 3-D capacitance extraction to get accurate results with much less time cost than field solver. In this work, the techniques of neural architecture search (NAS) and data augmentation are proposed to train better CNN models for 3-D capacitance extraction. Experimental results on datasets from different designs show that the obtained NAS-Cap models achieve remarkably higher accuracy than CNN-Cap, while consuming less runtime for inference and space for model storage. Meanwhile, the transferability of the NAS is validated, as the once searched architecture brought similar error reduction on coupling/total capacitance for the test cases from different design and/or process technology.

cs.AR↗

arXiv2024

On the Multi-modal Vulnerability of Diffusion Models

Diffusion models have been widely deployed in various image generation tasks, demonstrating an extraordinary connection between image and text modalities. Although prior studies have explored the vulnerability of diffusion models from the perspectives of text and image modalities separately, the current research landscape has not yet thoroughly investigated the vulnerabilities that arise from the integration of multiple modalities, specifically through the joint analysis of textual and visual features. In this paper, we are the first to visualize both text and image feature space embedded by diffusion models and observe a significant difference. The prompts are embedded chaotically in the text feature space, while in the image feature space they are clustered according to their subjects. These fascinating findings may underscore a potential misalignment in robustness between the two modalities that exists within diffusion models. Based on this observation, we propose MMP-Attack, which leverages multi-modal priors (MMP) to manipulate the generation results of diffusion models by appending a specific suffix to the original prompt. Specifically, our goal is to induce diffusion models to generate a specific object while simultaneously eliminating the original object. Our MMP-Attack shows a notable advantage over existing studies with superior manipulation capability and efficiency. Our code is publicly available at \url{https://github.com/ydc123/MMP-Attack}.

cs.LG↗

arXiv2023

Generating Adversarial Examples with Better Transferability via Masking Unimportant Parameters of Surrogate Model

Deep neural networks (DNNs) have been shown to be vulnerable to adversarial examples. Moreover, the transferability of the adversarial examples has received broad attention in recent years, which means that adversarial examples crafted by a surrogate model can also attack unknown models. This phenomenon gave birth to the transfer-based adversarial attacks, which aim to improve the transferability of the generated adversarial examples. In this paper, we propose to improve the transferability of adversarial examples in the transfer-based attack via masking unimportant parameters (MUP). The key idea in MUP is to refine the pretrained surrogate models to boost the transfer-based attack. Based on this idea, a Taylor expansion-based metric is used to evaluate the parameter importance score and the unimportant parameters are masked during the generation of adversarial examples. This process is simple, yet can be naturally combined with various existing gradient-based optimizers for generating adversarial examples, thus further improving the transferability of the generated adversarial examples. Extensive experiments are conducted to validate the effectiveness of the proposed MUP-based methods.

cs.LG↗

arXiv2022

Boosting the Adversarial Transferability of Surrogate Models with Dark Knowledge

Deep neural networks (DNNs) are vulnerable to adversarial examples. And, the adversarial examples have transferability, which means that an adversarial example for a DNN model can fool another model with a non-trivial probability. This gave birth to the transfer-based attack where the adversarial examples generated by a surrogate model are used to conduct black-box attacks. There are some work on generating the adversarial examples from a given surrogate model with better transferability. However, training a special surrogate model to generate adversarial examples with better transferability is relatively under-explored. This paper proposes a method for training a surrogate model with dark knowledge to boost the transferability of the adversarial examples generated by the surrogate model. This trained surrogate model is named dark surrogate model (DSM). The proposed method for training a DSM consists of two key components: a teacher model extracting dark knowledge, and the mixing augmentation skill enhancing dark knowledge of training data. We conducted extensive experiments to show that the proposed method can substantially improve the adversarial transferability of surrogate models across different architectures of surrogate models and optimizers for generating adversarial examples, and it can be applied to other scenarios of transfer-based attack that contain dark knowledge, like face verification. Our code is publicly available at \url{https://github.com/ydc123/Dark_Surrogate_Model}.

cs.LG↗

arXiv2021

CNN-Cap: Effective Convolutional Neural Network Based Capacitance Models for Full-Chip Parasitic Extraction

Accurate capacitance extraction is becoming more important for designing integrated circuits under advanced process technology. The pattern matching based full-chip extraction methodology delivers fast computational speed, but suffers from large error, and tedious efforts on building capacitance models of the increasing structure patterns. In this work, we propose an effective method for building convolutional neural network (CNN) based capacitance models (called CNN-Cap) for two-dimensional (2-D) structures in full-chip capacitance extraction. With a novel grid-based data representation, the proposed method is able to model the pattern with a variable number of conductors, so that largely reduce the number of patterns. Based on the ability of ResNet architecture on capturing spatial information and the proposed training skills, the obtained CNN-Cap exhibits much better performance over the multilayer perception neural network based capacitance model while being more versatile. Extensive experiments on a 55nm and a 15nm process technologies have demonstrated that the error of total capacitance produced with CNN-Cap is always within 1.3% and the error of produced coupling capacitance is less than 10% in over 99.5% probability. CNN-Cap runs more than 4000X faster than 2-D field solver on a GPU server, while it consumes negligible memory compared to the look-up table based capacitance model.

cs.LG↗

arXiv2020

RobFR: Benchmarking Adversarial Robustness on Face Recognition

Face recognition (FR) has recently made substantial progress and achieved high accuracy on standard benchmarks. However, it has raised security concerns in enormous FR applications because deep CNNs are unusually vulnerable to adversarial examples, and it is still lack of a comprehensive robustness evaluation before a FR model is deployed in safety-critical scenarios. To facilitate a better understanding of the adversarial vulnerability on FR, we develop an adversarial robustness evaluation library on FR named \textbf{RobFR}, which serves as a reference for evaluating the robustness of downstream tasks. Specifically, RobFR involves 15 popular naturally trained FR models, 9 models with representative defense mechanisms and 2 commercial FR API services, to perform the robustness evaluation by using various adversarial attacks as an important surrogate. The evaluations are conducted under diverse adversarial settings in terms of dodging and impersonation, $\ell_2$ and $\ell_\infty$, as well as white-box and black-box attacks. We further propose a landmark-guided cutout (LGC) attack method to improve the transferability of adversarial examples for black-box attacks by considering the special characteristics of FR. Based on large-scale evaluations, the commercial FR API services fail to exhibit acceptable performance on robustness evaluation, and we also draw several important conclusions for understanding the adversarial robustness of FR models and providing insights for the design of robust FR models. RobFR is open-source and maintains all extendable modules, i.e., \emph{Datasets}, \emph{FR Models}, \emph{Attacks\&Defenses}, and \emph{Evaluations} at \url{https://github.com/ShawnXYang/Face-Robustness-Benchmark}, which will be continuously updated to promote future research on robust FR.

cs.CV↗

arXiv2020

DP-Net: Dynamic Programming Guided Deep Neural Network Compression

In this work, we propose an effective scheme (called DP-Net) for compressing the deep neural networks (DNNs). It includes a novel dynamic programming (DP) based algorithm to obtain the optimal solution of weight quantization and an optimization process to train a clustering-friendly DNN. Experiments showed that the DP-Net allows larger compression than the state-of-the-art counterparts while preserving accuracy. The largest 77X compression ratio on Wide ResNet is achieved by combining DP-Net with other compression techniques. Furthermore, the DP-Net is extended for compressing a robust DNN model with negligible accuracy loss. At last, a custom accelerator is designed on FPGA to speed up the inference computation with DP-Net.

cs.LG↗

arXiv2019

Joint Computation and Communication Design for UAV-Assisted Mobile Edge Computing in IoT

Unmanned aerial vehicle (UAV)-assisted mobile edge computing (MEC) system is a prominent concept, where a UAV equipped with a MEC server is deployed to serve a number of terminal devices (TDs) of Internet of Things (IoT) in a finite period. In this paper, each TD has a certain latency-critical computation task in each time slot to complete. Three computation strategies can be available to each TD. First, each TD can operate local computing by itself. Second, each TD can partially offload task bits to the UAV for computing. Third, each TD can choose to offload task bits to access point (AP) via UAV relaying. We propose a new optimization problem formulation that aims to minimize the total energy consumption including communication-related energy, computation-related energy and UAV's flight energy by optimizing the bits allocation, time slot scheduling and power allocation as well as UAV trajectory design. As the formulated problem is non-convex and difficult to find the optimal solution, we solve the problem by two parts, and obtain the near optimal solution with within a dozen of iterations. Finally, numerical results are given to validate the proposed algorithm, which is verified to be efficient and superior to the other benchmark cases.

eess.SP↗

arXiv2018

Optimal Algorithm for Profiling Dynamic Arrays with Finite Values

How can one quickly answer the most and top popular objects at any time, given a large log stream in a system of billions of users? It is equivalent to find the mode and top-frequent elements in a dynamic array corresponding to the log stream. However, most existing work either restrain the dynamic array within a sliding window, or do not take advantages of only one element can be added or removed in a log stream. Therefore, we propose a profiling algorithm, named S-Profile, which is of $O(1)$ time complexity for every updating of the dynamic array, and optimal in terms of computational complexity. With the profiling results, answering the queries on the statistics of dynamic array becomes trivial and fast. With the experiments of various settings of dynamic arrays, our accurate S-Profile algorithm outperforms the well-known methods, showing at least 2X speedup to the heap based approach and 13X or larger speedup to the balanced tree based approach.

cs.DS↗

arXiv2018

Secrecy Energy Efficiency Maximization for UAV-Enabled Mobile Relaying

This paper investigates the secrecy energy efficiency (SEE) maximization problem for unmanned aerial vehicle enabled mobile relaying system, where a high-mobility UAV is exploited to assist delivering the confidential information from a ground source to a legitimate ground destination with the direct link blocked, in the presence of a potential eavesdropper. We aim to maximize SEE of the UAV by jointly optimizing the communication scheduling, power allocation, and UAV trajectory over a finite time horizon. The formulated problem is a mixed-integer non-convex optimization problem that is challenging to be solved optimally. To make the problem tractable, we decompose the problem into three subproblems, and propose an efficient iterative algorithm that alternately optimizes the subproblems. In addition, two special cases are considered as benchmarks in this paper. Simulation results show that the proposed design significantly improves the SEE of the UAV, as compared to the benchmarks

cs.IT↗

arXiv2018

Pose2Seg: Detection Free Human Instance Segmentation

The standard approach to image instance segmentation is to perform the object detection first, and then segment the object from the detection bounding-box. More recently, deep learning methods like Mask R-CNN perform them jointly. However, little research takes into account the uniqueness of the "human" category, which can be well defined by the pose skeleton. Moreover, the human pose skeleton can be used to better distinguish instances with heavy occlusion than using bounding-boxes. In this paper, we present a brand new pose-based instance segmentation framework for humans which separates instances based on human pose, rather than proposal region detection. We demonstrate that our pose-based framework can achieve better accuracy than the state-of-art detection-based approach on the human instance segmentation problem, and can moreover better handle occlusion. Furthermore, there are few public datasets containing many heavily occluded humans along with comprehensive annotations, which makes this a challenging problem seldom noticed by researchers. Therefore, in this paper we introduce a new benchmark "Occluded Human (OCHuman)", which focuses on occluded humans with comprehensive annotations including bounding-box, human pose and instance masks. This dataset contains 8110 detailed annotated human instances within 4731 images. With an average 0.67 MaxIoU for each person, OCHuman is the most complex and challenging dataset related to human instance segmentation. Through this dataset, we want to emphasize occlusion as a challenging problem for researchers to study.

cs.CV↗