arXiv subjects

Devika K Divakar

Publications and source records attributed to Devika K Divakar.

7 recordsLinked to original sources

arXiv2026

Design of an atmospheric dispersion corrector and double scrambler for improved fiber coupling and illumination uniformity for the HET HRS

The Hobby--Eberly Telescope High Resolution Spectrograph (HET--HRS) is undergoing a major instrument upgrade to improve its performance over the 360--1000 nm wavelength range. As part of this effort, a new fiber-feed system has been developed to increase throughput and enhance illumination stability. This paper presents the optical and opto-mechanical designs of the upgraded HRS Input Head Module Package and lens-based Double Scramblers. The Input Head incorporates a static Atmospheric Dispersion Corrector (ADC) and relay optics optimized for the HET operational zenith-angle range, reducing the residual atmospheric dispersion to less than 0.42 arcsec while improving wavelength-dependent fiber coupling. Separate Double Scrambler designs were developed for the 260 \textmu m and 320 \textmu m science fibers to exchange the near-field and far-field illumination distributions. Geometrical image analyses demonstrate stable near-field and far-field illumination, reduced coupling losses, and acceptable angular acceptance across both fiber geometries. The opto-mechanical designs supporting the Input Head and Double Scrambler are also presented to provide the alignment accuracy and mechanical stability required for the upgraded fiber-feed system. These results establish the proposed architecture as a practical solution for improving the optical performance and illumination stability of HET--HRS.

astro-ph.IM↗

arXiv2026

Optomechanical design of an ADC and image rotator for the HJST Coudé Spectrograph at McDonald Observatory

High-resolution spectroscopic observations require stable slit illumination and mitigation of atmospheric refraction effects that degrade throughput and spectral fidelity. We present the optical and mechanical design of a Rotational Atmospheric Dispersion Corrector (RADC) for the coudé Tull Spectrograph on the Harlan J. Smith 2.7 m Telescope. Atmospheric dispersion introduces wavelength-dependent image displacement that increases with zenith distance and reaches approximately 4 arcsec across the 350 - 1000 nm wavelength range at a zenith angle of 65°, leading to wavelength-dependent slit losses and non-uniform slit illumination. The RADC employs a pair of counter-rotating Amici prisms to provide continuous correction over the operational zenith-angle range while maintaining image quality and compatibility with the existing coudé pre-slit optics. The optical and mechanical design of the deployable ADC subsystem, its integration within the limited relay envelope, and its expected impact on throughput and slit illumination stability are presented. In addition, we discuss a K-mirror image rotator as a potential future upgrade for observations of extended and non-point-like targets, where maintaining a fixed slit position angle on the sky may be desirable during long integrations. Preliminary optical studies of the image-rotation concept and its integration considerations within the HJST coudé relay are briefly summarized. Together, these developments support enhanced observing capabilities for high-resolution spectroscopy on the HJST.

astro-ph.IM↗

arXiv2025

A new broadband atmospheric dispersion corrector for HROS-TMT

Atmospheric dispersion causes light from celestial objects with different wavelengths to refract at varying angles as it passes through Earth's atmosphere. This effect results in an elongated image at the focal plane of a telescope and diminishes fiber coupling efficiency into spectrographs. We propose an optical design that incorporates a Rotational Atmospheric Dispersion Corrector (RADC) to address the broadband dispersion encountered in the multi-object mode of the High-Resolution Optical Spectrograph (HROS) on the Thirty Meter Telescope (TMT). The RADC corrects the dispersion across the entire wavelength range (0.31-1 micron), using Amici prisms optimized for over 90% transmission efficiency and minimal angular deviation of the beam from the optical axis after dispersion correction. For enhanced accuracy, particularly in the blue region, we have, for the first time, implemented the Filippenko (1982) model in Zemax via a custom Dynamic-Link Library (DLL) file.

astro-ph.IM↗

arXiv2025

High-Resolution Echelle Spectroscopy for Solar System Planets: A Planet-as-Point-Source Analogy

Transmission spectroscopy has proven to be an effective technique for characterizing exoplanet atmospheres. However, transmission spectroscopy requires planetary transits, which occur for only a small fraction of planetary systems due to geometric alignment constraints; hence, characterizing exoplanets through their reflected spectrum of host stars will be helpful for a large number of exoplanets. The upcoming extremely large telescopes (ELTs) will be able to study the reflected spectra of exoplanets. Here, we present a preliminary optical design and a detailed throughput analysis of the instrumentation that interfaces the 2.34 m Vainu Bappu Telescope prime focus to an existing high-resolution echelle spectrograph with disk-integrated light from solar system objects. One of the primary objectives is to obtain high-resolution, high signal-to-noise reflected spectra from the solar system objects.

astro-ph.EP↗

arXiv2025

A multi-object approach for studying exoplanet atmospheres using high-resolution spectrographs

Atmospheric characterization of exoplanets has traditionally relied on Low-Resolution Transmission Spectroscopy (LRTS), obtained from both space- and ground-based facilities, as well as on High-Resolution Transmission Spectroscopy (HRTS). Although HRTS can resolve individual spectral lines, it is subject to normalization degeneracies that limit the accurate retrieval of key atmospheric parameters such as pressure, abundance, and cloud opacity. A promising strategy to mitigate this issue is to combine ground-based HRTS with space-based LRTS. However, this approach depends on two separate datasets, thereby requiring two independent observations. In this study, we explore the feasibility of Multi-Object High-Resolution Transmission Spectroscopy (Mo-HRTS) as a means to constrain atmospheric parameters in retrievals using a single dataset. Through simulations based on existing spectrograph specifications for a well-studied target, we demonstrate that low-resolution broadband transmission spectra can be extracted from Mo-HRTS data.

astro-ph.EP↗

arXiv2025

Design overview of the fiber feed for the Hobby-Eberly telescope's HRS

We present the redesign of the fiber feed for the High Resolution Spectrograph (HRS) at the Hobby Eberly Telescope (HET). The upgrade incorporates a static atmospheric dispersion corrector (ADC) using Ohara i-line glasses (BAL15Y and S-FPL51Y), carefully selected for high internal transmission (> 99\%), and optimized to improve throughput and image quality across the 360 - 1000 nm band. The ADC consists of two identical Amici prisms, fixed at an orientation optimized for the HET's nominal zenith angle (35\textdegree), correcting dispersion over the HET zenith range of 26.5\textdegree to 43.5\textdegree. Relay optics were optimized to improve blue end sensitivity and maintain substantially sub-fiber-core RMS spot radii across the full field of view. Simulations, including atmospheric dispersion modeling in ZEMAX show residual dispersion $\le$ 0.42" considering the entire range of wavelengths and zenith distances, with transmission efficiency of 91 to 94\%. We also discuss how the mechanical design integrates all optical elements, including the ADC, in a rigid, modular input head assembly mounted in the HET Prime Focus Instrument Package (PFIP). This optimized fiber feed enhances coupling efficiency, improves S/N in the blue, and enables higher radial velocity precision , maintaining HET - HRS as a leading facility for high - resolution spectroscopy.

astro-ph.IM↗

arXiv2023

Possibilities of Identifying Members from Milky Way Satellite Galaxies using Unsupervised Machine Learning Algorithms

A detailed study of stellar populations in Milky Way (MW) satellite galaxies remains an observational challenge due to their faintness and fewer spectroscopically confirmed member stars. We use unsupervised machine learning methods to identify new members for nine nearby MW satellite galaxies using Gaia data release-3 (Gaia DR3) astrometry and the Dark Energy Survey (DES) and the DECam Local Volume Exploration Survey (DELVE) photometry. Two density-based clustering algorithms, DBSCAN and HDBSCAN, have been used in the four-dimensional astrometric parameter space to identify member stars belonging to MW satellite galaxies. Our results indicate that we can recover more than 80% of the known spectroscopically confirmed members in most of the satellite galaxies and also reject 95-100% of spectroscopic non-members. We have also added many new members using this method. We compare our results with previous studies that also use photometric and astrometric data and discuss the suitability of density-based clustering methods for MW satellite galaxies

astro-ph.IM↗