arXiv subjects

Derek Davis

Publications and source records attributed to Derek Davis.

At least 19 recordsLinked to original sources

arXiv2026

SGNAX: a unified matched-filter and excess-power pipeline for gravitational-wave detector characterization

We present SGNAX, an open-source pipeline for gravitational-wave detector characterization that delivers matched-filter and excess-power transient triggers from a single streaming dataflow graph. Built on the Stream Graph Navigator (sgn) framework, SGNAX unifies the multi-rate sine-Gaussian matched-filter search of snax and the multi-resolution Q-transform search of omicron in one Python-native package. Auxiliary channels from an interferometer are analyzed as parallel branches sharing data-read and whitening stages, reducing per-channel processing cost as channels are added. A full day of 16 kHz strain is analyzed in 14 minutes, and Q-transform processing is 2.8 times more efficient per channel at 32 channels than at one. Matched-filter correlations use PyTorch and run on CPU or GPU. Data sources include offline frame caches, shared-memory buffers, and the arrakis distribution service, with the same configuration supporting offline and online operation. The matched filter delivers triggers at about five seconds end-to-end latency, while the Q-transform operates at latencies of tens of seconds. Injection campaigns recover 99.4% of recoverable sine-Gaussian injections with parameters within the expected template mismatch and show broadband white-noise-burst recovery consistent with established event-trigger generators. On 24 hours of archival LIGO strain, SGNAX reproduces the omicron trigger population at 10--100 Hz, with trigger rates and SNRs agreeing to a few percent. On production auxiliary channels, it recovers the snax loud-feature population with 80% per-bin coincidence. The injection-calibrated reimplementation also reveals a multiband amplitude error in production snax that inflates reported SNRs below 25.6 Hz by factors of $\sqrt{2}$--2, for which we identify the mechanism and correction.

astro-ph.IM↗

arXiv2026

Joint inference for gravitational-wave signal and noise glitch: Method and application

Non-Gaussian noise transients ("glitches") in gravitational-wave observatories degrade our ability to accurately perform astrophysical inference. We present the analysis pipeline bilby_glitch, which allows for simultaneous Bayesian inference of gravitational-wave signals and glitches. Our framework is modular and built on top of the popular bilby framework, facilitating future extensions with additional glitch and signal models. We integrate transdimensional bilby into our framework and discuss three glitch models: a physically-motivated slow scattering model, and flexible sine-Gaussian and chirplet models. Using a combination of simulated and real data, we demonstrate that bilby_glitch produces reliable results. We then reanalyse two gravitational-wave events - GW191109 and GW200129 - which show signs of interesting black-hole spins, but which may also be affected by data-quality issues. Our results for GW191109 are consistent with previous analysis. For GW200129, we recover results consistent with Payne et al., where the evidence of spin-precession is much weaker when using the waveform approximant NRSur7dq4 in combination with wavelet-based glitch modeling. Furthermore, we show the astrophysical conclusion of this event is dependent on the interplay between the waveform approximant and glitch model, since in contrast to NRSur7dq4 we find that inference with the waveform approximant IMRPhenomXPHM shows strong evidence of spin-precession when used in combination with wavelet-based glitch modeling.

gr-qc↗

arXiv2026

Rapid data quality investigations of gravitational-wave events with the Data Quality Report Builder toolkit

We present the Data Quality Report Builder toolkit, DQRbuild, a suite of data quality tools that have been developed to vet gravitational-wave events in preparation for the fourth LIGO-Virgo-KAGRA observing run. We explain the main functionality and the many scientific tests that we support. To validate the performance of the tools included in the toolkit, we run a series of tests on all significant candidates shared as public alerts in the third observing run to compare against what was manually reported using human intervention. We find that these automated tools can now identify 96% of the problems identified by humans during this previous observing run, with a 24% false alarm rate. We conclude with a commentary on the prospects and potential challenges for fully automating the process of vetting the data quality for gravitational-wave events identified in future observing runs.

astro-ph.IM↗

arXiv2026

Coalescing Compact Binary Parameter Estimation with Gravitational Waves in the Presence of non-Gaussian Transient Noise

Data from gravitational-wave (GW) detectors often contains a high rate of non-Gaussian transient noise, known as glitches. The parameters estimated from GW signals coinciding with detector glitches are occasionally biased away from their true values. During the first part of the fourth LIGO-Virgo-KAGRA (LVK) observing run, 29% of GW candidates had overlapping or nearby glitches in one or more detectors. In the latter part of the fourth observation run, sensitivity improvements have increased the rates of GW detection. Consequently, scenarios in which GW signals and detector glitches overlap in time are more likely. In this study, we quantify shifts in inferred posterior distributions for short-duration compact binary coalescence GW signals interacting with common LIGO glitches as a function of time between the signal merger time and the glitch. We find statistically significant biases in parameter estimation for mass, spin, and sky position for "blip", "thunder", and "fast-scattering" glitches. Using these results, we provide estimates of what parameters are most affected by overlapping noise sources, as well as what constitutes a "safe" time separation between a gravitational wave signal and a glitch, without requiring glitch subtraction for unbiased source property estimation. We find that in a majority of cases, all parameters are susceptible to significant bias due to glitch interference. Additionally, we find that glitches that occur within the time prior of the GW signal cause more extreme biases than glitches outside of the time prior.

gr-qc↗

arXiv2026

OmegaNeuron: Applying GravitySpy Similarity Methods to the Search for LIGO Glitch Witnesses

Gravitational-wave (GW) astronomy has advanced our understanding of compact mergers through instruments like the Laser Interferometer Gravitational-Wave Observatory (LIGO). However, the extreme sensitivity required for these detections makes the instruments susceptible to short-duration transient noise, or glitches, which obscure GW data. Current tools such as Omega Scan and GravitySpy assist in identifying and classifying such noise, but are limited by manual inspection or dependence on large training sets. To address these challenges, we present \textit{OmegaNeuron}, a machine-learning tool that integrates GravitySpy's image similarity methods with Omega Scan's transient analysis to automate the identification of auxiliary channels that witness glitches. Applied to multiple glitch examples, OmegaNeuron consistently highlighted plausible witness channels and showed strong agreement with existing correlation tools, while providing clearer ranking through a quantitative similarity metric. Integrated into the \texttt{gwdetchar} package, OmegaNeuron enables faster analysis that improves glitch witness identification, enhancing both detector sensitivity and the reliability of gravitational-wave observations.

astro-ph.IM↗

arXiv2025

Inferring the spins of merging black holes in the presence of data-quality issues

Gravitational waves from black hole binary mergers carry information about the component spins, but inference is sensitive to analysis assumptions, which may be broken by terrestrial noise transients known as glitches. Using a variety of simulated glitches and gravitational wave signals, we study the conditions under which glitches can bias spin measurements. We confirm the theoretical expectation that inference and subtraction of glitches invariably leaves behind residual power due to statistical uncertainty, no matter the strength (signal-to-noise ratio; SNR) of the original glitch. Next we show that low-SNR glitches - including those below the threshold for flagging data-quality issues - can still significantly bias spin inference. Such biases occur for a range of glitch morphologies, even in cases where glitches and signals are not precisely aligned in phase. Furthermore, we find that residuals of glitch subtraction can result in biases as well. Our results suggest that joint inference of the glitch and gravitational wave parameters, with appropriate models and priors, is required to address these uncertainties inherent in glitch mitigation via subtraction.

gr-qc↗

arXiv2025

Low-latency Forecasts of Kilonova Light Curves for Rubin and ZTF

Follow-up of gravitational-wave events by wide-field surveys is a crucial tool for the discovery of electromagnetic counterparts to gravitational wave sources, such as kilonovae. Machine learning tools can play an important role in aiding search efforts. We have developed a public tool to predict kilonova light curves using simulated low-latency alert data from the International Gravitational Wave Network during observing runs 4 (O4) and 5 (O5). It uses a bidirectional long-short-term memory (LSTM) model to forecast kilonova light curves from binary neutron star and neutron star-black hole mergers in the Zwicky Transient Facility (ZTF) and Rubin Observatory's Legacy Survey of Space and Time filters. The model achieves a test mean squared error (MSE) of 0.19 for ZTF filters and 0.22 for Rubin filters, calculated by averaging the squared error over all time steps, filters, and light curves in the test set. We verify the performance of the model against merger events followed-up by the ZTF partnership during O4a and O4b. We also analyze the effect of incorporating skymaps and constraints on physical features such as ejecta mass through a hybrid convolutional neural network and LSTM model. Using ejecta mass, the performance of the model improves to an MSE of 0.1. However, using full skymap information results in slightly lower model performance. Our models are publicly available and can help to add important information to help plan follow-up of candidate events discovered by current and next-generation public surveys.

astro-ph.HE↗

arXiv2025

Guiding interferometer improvements with the frequency-dependent inspiral range

The inspiral range is the most common metric for characterizing the performance of ground-based gravitational-wave interferometers. However, there is no clear formalism for working with frequency-dependent inspiral range quantities. We introduce a metric for the cumulative normalized range of a gravitational-wave interferometer, as well as methods to compare two separate noise curves. We show how this metric is a valuable tool for guiding the commissioning of these interferometers and provides increased clarity compared to other commonly used approaches.

astro-ph.IM↗

arXiv2024

Phase consistency test to identify type II strongly lensed gravitational wave signals using a single event

For gravitationally lensed type II signals, the phase of the dominant (2, 2) mode and the higher order (3, 3) mode is offset by $-\pi/12$, or roughly -0.26 radians. Using this, we develop a test for type II imagery by allowing the phases of the (2,2) and (3,3) modes to vary separately and introducing a new waveform parameter to represent the phase offset between the two. We use simulated, asymmetric mass ratio, precessing signals to show that the test can reproduce the $-\pi/12$ phase offset when detected by three detectors for H-L optimal SNR $\gtrsim$ 40 and $\mathcal{M} \leq 30$. We analyze GW190412 and GW190814 using this parameterization, measuring the offset to be $0.13^{+0.22}_{-0.17}$ for GW190412 and $-0.05^{+0.20}_{-0.22}$ for GW190814. We also measure the Bayes factor in support of zero phase offset, $\log_{10} \mathcal{B}_{\Delta \varphi = 0}$, to be $-0.14$ for GW190412 and $0.21$ for GW190814. This implies our results are not strong enough to confidently argue if either event is a type II image, and is consistent with our statistical analysis.

gr-qc↗

arXiv2024

The anti-aligned spin of GW191109: glitch mitigation and its implications

With a high total mass and an inferred effective spin anti-aligned with the orbital axis at the 99.9% level, GW191109 is one of the most promising candidates for a dynamical formation origin among gravitational wave events observed so far. However, the data containing GW191109 are afflicted with terrestrial noise transients, i.e., detector glitches, generated by the scattering of laser light in both LIGO detectors. We study the implications of the glitch(es) on the inferred properties and astrophysical interpretation of GW191109. Using time- and frequency-domain analysis methods, we isolate the critical data for spin inference to 35 - 40 Hz and 0.1 - 0.04 s before the merger in LIGO Livingston, directly coincident with the glitch. Using two models of glitch behavior, one tailored to slow scattered light and one more generic, we perform joint inference of the glitch and binary parameters. When the glitch is modeled as slow scattered light, the binary parameters favor anti-aligned spins, in agreement with existing interpretations. When more flexible glitch modeling based on sine-Gaussian wavelets is used instead, a bimodal aligned/anti-aligned solution emerges. The anti-aligned spin mode is correlated with a weaker inferred glitch and preferred by ~ 70 : 30 compared to the aligned spin mode and a stronger inferred glitch. We conclude that if we assume that the data are only impacted by slow scattering noise, then the anti-aligned spin inference is robust. However, the data alone cannot validate this assumption and resolve the anti-aligned spin and potentially dynamical formation history of GW191109.

gr-qc↗

arXiv2024

Technical Noise, Data Quality, and Calibration Requirements for Next-Generation Gravitational-Wave Science

The next generation of ground-based gravitational-wave interferometers is expected to generate a bounty of new astrophysical discoveries, with sensitivities and bandwidths greatly improved compared to current-generation detectors. These detectors will allow us to make exceptional advancements in our understanding of fundamental physics, the dynamics of dense matter, and the cosmic history of compact objects. The fundamental design aspects of these planned interferometers will enable these new discoveries; however, challenges in technical noise, data quality, and calibration have the potential to limit the scientific reach of these instruments. In this work, we evaluate the requirements of these elements for next-generation gravitational-wave science, focusing on how these areas may impact the proposed Cosmic Explorer observatory. We highlight multiple aspects of these fields where additional research and development is required to ensure Cosmic Explorer reaches its full potential.

astro-ph.IM↗

arXiv2023

Gravity Spy: Lessons Learned and a Path Forward

The Gravity Spy project aims to uncover the origins of glitches, transient bursts of noise that hamper analysis of gravitational-wave data. By using both the work of citizen-science volunteers and machine-learning algorithms, the Gravity Spy project enables reliable classification of glitches. Citizen science and machine learning are intrinsically coupled within the Gravity Spy framework, with machine-learning classifications providing a rapid first-pass classification of the dataset and enabling tiered volunteer training, and volunteer-based classifications verifying the machine classifications, bolstering the machine-learning training set and identifying new morphological classes of glitches. These classifications are now routinely used in studies characterizing the performance of the LIGO gravitational-wave detectors. Providing the volunteers with a training framework that teaches them to classify a wide range of glitches, as well as additional tools to aid their investigations of interesting glitches, empowers them to make discoveries of new classes of glitches. This demonstrates that, when giving suitable support, volunteers can go beyond simple classification tasks to identify new features in data at a level comparable to domain experts. The Gravity Spy project is now providing volunteers with more complicated data that includes auxiliary monitors of the detector to identify the root cause of glitches.

gr-qc↗

arXiv2023

A new method to distinguish gravitational-wave signals from detector noise transients with Gravity Spy

The Advanced LIGO and Advanced Virgo detectors have enabled the confident detection of dozens of mergers of black holes and neutron stars. However, the presence of detector noise transients (glitches) hinders the search for these gravitational wave (GW) signals. We prototyped a restructuring of Gravity Spy's classification model to distinguish between glitches and astrophysical signals. Our method is able to correctly classify three-quarters of retracted candidate events in O3b as non-astrophysical and 100\% of the confirmed astrophysical events as true signals. This approach will inform candidate event validation efforts in the latest observing run.

gr-qc↗

arXiv2023

An Optically Targeted Search for Gravitational Waves emitted by Core-Collapse Supernovae during the Third Observing Run of Advanced LIGO and Advanced Virgo

We present the results from a search for gravitational-wave transients associated with core-collapse supernovae observed optically within 30 Mpc during the third observing run of Advanced LIGO and Advanced Virgo. No gravitational wave associated with a core-collapse supernova has been identified. We then report the detection efficiency for a variety of possible gravitational-wave emissions. For neutrino-driven explosions, the distance at which we reach 50% detection efficiency is up to 8.9 kpc, while more energetic magnetorotationally-driven explosions are detectable at larger distances. The distance reaches for selected models of the black hole formation, and quantum chromodynamics phase transition are also provided. We then constrain the core-collapse supernova engine across a wide frequency range from 50 Hz to 2 kHz. The upper limits on gravitational-wave energy and luminosity emission are at low frequencies down to $10^{-4}\,M_\odot c^2$ and $6 \times 10^{-4}\,M_\odot c^2$/s, respectively. The upper limits on the proto-neutron star ellipticity are down to 3 at high frequencies. Finally, by combining the results obtained with the data from the first and second observing runs of LIGO and Virgo, we improve the constraints of the parameter spaces of the extreme emission models. Specifically, the proto-neutron star ellipticities for the long-lasting bar mode model are down to 1 for long emission (1 s) at high frequency.

astro-ph.HE↗

arXiv2023

pygwb: Python-based library for gravitational-wave background searches

The collection of gravitational waves (GWs) that are either too weak or too numerous to be individually resolved is commonly referred to as the gravitational-wave background (GWB). A confident detection and model-driven characterization of such a signal will provide invaluable information about the evolution of the Universe and the population of GW sources within it. We present a new, user-friendly Python--based package for gravitational-wave data analysis to search for an isotropic GWB in ground--based interferometer data. We employ cross-correlation spectra of GW detector pairs to construct an optimal estimator of the Gaussian and isotropic GWB, and Bayesian parameter estimation to constrain GWB models. The modularity and clarity of the code allow for both a shallow learning curve and flexibility in adjusting the analysis to one's own needs. We describe the individual modules which make up {\tt pygwb}, following the traditional steps of stochastic analyses carried out within the LIGO, Virgo, and KAGRA Collaboration. We then describe the built-in pipeline which combines the different modules and validate it with both mock data and real GW data from the O3 Advanced LIGO and Virgo observing run. We successfully recover all mock data injections and reproduce published results.

gr-qc↗

arXiv2022

Bayesian modelling of scattered light in the LIGO interferometers

Excess noise from scattered light poses a persistent challenge in the analysis of data from gravitational wave detectors such as LIGO. We integrate a physically motivated model for the behavior of these "glitches" into a standard Bayesian analysis pipeline used in gravitational wave science. This allows for the inference of the free parameters in this model, and subtraction of these models to produce glitch-free versions of the data. We show that this inference is an effective discriminator of the presence of the features of these glitches, even when those features may not be discernible in standard visualizations of the data.

astro-ph.IM↗

arXiv2022

Mitigating the effects of instrumental artifacts on source localizations

Instrumental artifacts in gravitational-wave strain data can overlap with gravitational-wave detections and significantly impair the accuracy of the measured source localizations. These biases can prevent the detection of any electromagnetic counterparts to the detected gravitational wave. We present a method to mitigate the effect of instrumental artifacts on the measured source localization. This method uses inpainting techniques to remove data containing the instrumental artifact and then correcting for the data removal in the subsequent analysis of the data. We present a series of simulations using this method using a variety of signal classes and inpainting parameters which test the effectiveness of this method and identify potential limitations. We show that in the vast majority of scenarios, this method can robustly localize gravitational-wave signals even after removing portions of the data. We also demonstrate how an instrumental artifact can bias the measured source location and how this method can be used to mitigate this bias.

astro-ph.IM↗

arXiv2022

Identifying glitches near gravitational-wave signals from compact binary coalescences using the Q-transform

We present a computational method to identify glitches in gravitational-wave data that occur nearby gravitational-wave signals from compact binary coalescences. The Q-transform, an established tool in LIGO-Virgo-KAGRA data analysis, computes the probability of any excess in the data surrounding a signal against the assumption of a Gaussian noise background, flagging any significant glitches. Subsequently, we perform validation tests on this computational method to ensure self-consistency in colored Gaussian noise, as well as data that contains a gravitational-wave event after subtracting the signal using the best-fit template. Finally, a comparison of our glitch identification results from real events in LIGO-Virgo's third observing run against the list of events which required glitch mitigation shows that this tool will be useful in providing precise information about data quality to improve astrophysical analyses of these events.

astro-ph.IM↗