arXiv Science⌕ Search

arXiv subjects

Denis Funfschilling

Publications and source records attributed to Denis Funfschilling.

16 recordsLinked to original sources
arXiv2024

Ultrasonic elastography for the prevention of breast implant rupture: Detection of an increase with stiffness over implantation time

Breast implants are widely used after breast cancer resection and must be changed regularly to avoid a rupture. To date, there are no quantitative criteria to help this decision. The mechanical evolution of the gels and membranes of the implants is still under investigated, although it can lead to early rupture. In this study, 35 breast explants having been implanted in patients for up to 17 years were characterized by ex vivo measurements of their mechanical properties. Using Acoustic Radiation Force Impulse (ARFI) ultrasound elastography, an imaging method for non-destructive mechanical characterization, an increase in the stiffness of the explants has been observed. This increase was correlated with the implantation duration, primarily after 8 years of implantation. With an increase of the shear modulus of up to a factor of nearly 3, the loss of flexibility of the implants is likely to lead to a significant increase of their risk of rupture. A complementary analysis of the gel from the explants by mass spectrometry imaging (MSI) and liquid chromatography coupled to high resolution mass spectrometry (LC-HRMS) confirms the presence of metabolites of cholesterol originating from the breast tissues, which most likely crossed the membrane of the implants and most likely degrades the gel. By observing the consequences of the physical-chemical mechanisms at work within patients, this study shows that ultrasound elastography could be used in vivo as a quantitative indicator of the risk of breast implant rupture and help diagnose their replacement.

physics.med-ph↗
arXiv2015

Effects of polymer additives in the bulk of turbulent thermal convection

We present experimental evidence that a minute amount of polymer additives can significantly enhance heat transport in the bulk region of turbulent thermal convection. The effects of polymer additives are found to be the \textit{suppression} of turbulent background fluctuations that give rise to incoherent heat fluxes that make no net contribution to heat transport, and at the same time to \textit{increase} the coherency of temperature and velocity fields. The suppression of small-scale turbulent fluctuations leads to more coherent thermal plumes that result in the heat transport enhancement. The fact that polymer additives can increase the coherency of thermal plumes is supported by the measurements of a number of local quantities, such as the extracted plume amplitude and width, the velocity autocorrelation functions and the velocity-temperature cross-correlation coefficient. The results from local measurements also suggest the existence of a threshold value for the polymer concentration, only above which can significant modification of the plume coherent properties and enhancement of the local heat flux be observed. Estimation of the plume emission rate suggests that the second effect of polymer additives is to stabilize the thermal boundary layers.

physics.flu-dyn↗
arXiv2012

Heat transport by turbulent Rayleigh-B\'enard convection for $\Pra\ \simeq 0.8$ and $4\times 10^{11} \alt \Ra\ \alt 2\times10^{14}$: Ultimate-state transition for aspect ratio $\Gamma = 1.00$

We report experimental results for heat-transport measurements by turbulent Rayleigh-B\'enard convection in a cylindrical sample of aspect ratio $\Gamma \equiv D/L = 1.00$ ($D = 1.12$ m is the diameter and $L = 1.12$ m the height). They are for the Rayleigh-number range $4\times10^{11} \alt \Ra \alt 2\times10^{14}$ and for Prandtl numbers \Pra\ between 0.79 and 0.86. For $\Ra < \Ra^*_1 \simeq 2\times 10^{13}$ we find $\Nu = N_0 \Ra^{\gamma_{eff}}$ with $\gamma_{eff} = 0.321 \pm 0.002$ and $N_0 = 0.0776$, consistent with classical turbulent Rayleigh-B\'enard convection in a system with laminar boundary layers below the top and above the bottom plate and with the prediction of Grossmann and Lohse. For $\Ra > \Ra_1^*$ the data rise above the classical-state power-law and show greater scatter. In analogy to similar behavior observed for $\Gamma = 0.50$, we interpret this observation as the onset of the transition to the ultimate state. Within our resolution this onset occurs at nearly the same value of $\Ra_1^*$ as it does for $\Gamma = 0.50$. This differs from an earlier estimate by Roche {\it et al.} which yielded a transition at $\Ra_U \simeq 1.3\times 10^{11} \Gamma^{-2.5\pm 0.5}$. A $\Gamma$-independent $\Ra^*_1$ would suggest that the boundary-layer shear transition is induced by fluctuations on a scale less than the sample dimensions rather than by a global $\Gamma$-dependent flow mode. Within the resolution of the measurements the heat transport above $\Ra_1^*$ is equal for the two $\Gamma$ values, suggesting a universal aspect of the ultimate-state transition and properties. The enhanced scatter of \Nu\ in the transition region, which exceeds the experimental resolution, indicates an intrinsic irreproducibility of the state of the system.

physics.flu-dyn↗
arXiv2012

Heat transport by turbulent Rayleigh-B\'enard convection for $\Pra\ \simeq 0.8$ and $3\times 10^{12} \alt \Ra\ \alt 10^{15}$: Aspect ratio $\Gamma = 0.50$

We report experimental results for heat-transport measurements, in the form of the Nusselt number \Nu, by turbulent Rayleigh-B\'enard convection in a cylindrical sample of aspect ratio $\Gamma \equiv D/L = 0.50$ ($D = 1.12$ m is the diameter and $L = 2.24$ m the height). The measurements were made using sulfur hexafluoride at pressures up to 19 bars as the fluid. They are for the Rayleigh-number range $3\times 10^{12} \alt \Ra \alt 10^{15}$ and for Prandtl numbers \Pra\ between 0.79 and 0.86. For $\Ra < \Ra^*_1 \simeq 1.4\times 10^{13}$ we find $\Nu = N_0 \Ra^{\gamma_{eff}}$ with $\gamma_{eff} = 0.312 \pm 0.002$, consistent with classical turbulent Rayleigh-B\'enard convection in a system with laminar boundary layers below the top and above the bottom plate. For $\Ra^*_1 < \Ra < \Ra^*_2$ (with $\Ra^*_2 \simeq 5\times 10^{14}$) $\gamma_{eff}$ gradually increases up to $0.37\pm 0.01$. We argue that above $\Ra^*_2$ the system is in the ultimate state of convection where the boundary layers, both thermal and kinetic, are also turbulent. Several previous measurements for $\Gamma = 0.50$ are re-examined and compared with the present results.

physics.flu-dyn↗
arXiv2012

Logarithmic temperature profiles in turbulent Rayleigh-B\'enard convection

We report results for the temperature profiles of turbulent Rayleigh-B\'enard convection (RBC) in the interior of a cylindrical sample of aspect ratio $\Gamma \equiv D/L = 0.50$ ($D$ and $L$ are the diameter and height respectively). Results from experiment over the Rayleigh number range $4\times 10^{12} \alt Ra \alt 10^{15}$ for a Prandtl number $\Pra \simeq 0.8$ and from direct numerical simulation (DNS) at $Ra = 2 \times 10^{12}$ for $\Pra = 0.7$ are presented. We find that the temperature varies as $A*ln(z/L) + B$ where $z$ is the distance from the bottom or top plate. This is the case in the classical as well as in the ultimate state of RBC. From DNS we find that $A$ in the classical state decreases in the radial direction as the distance from the side wall increases and becomes small near the sample center.

physics.flu-dyn↗
arXiv2009

Search for the "ultimate state" in turbulent Rayleigh-Bénard convection

Measurements of the Nusselt number $Nu$ and of temperature variations $ΔT_b$ in the bulk fluid are reported for turbulent Rayleigh-Bénard convection of a cylindrical sample. They cover the Rayleigh-number range $10^{9} \alt Ra \alt 3\times 10^{14}$ using He (Prandtl number $Pr = 0.67$), N$_2$ ($Pr = 0.72$) and SF$_6$ ($Pr = 0.79$ to 0.84) at pressures up to 15 bars and near-ambient temperatures. The sample had a height $L=2.24$m and diameter $D = 1.12$m and was located in a new High-Pressure Convection Facility (HPCF) at the Max Planck Institute for Dynamics and Self-Organization in Göttingen, Germany. The data do not show the transition to an "ultimate regime" reported by Chavanne et al. and are consistent with the measurements of Niemela et al.

physics.flu-dyn↗
arXiv2008

Enhanced heat transport by turbulent two-phase Rayleigh-Bénard convection

We report measurements of turbulent heat-transport in samples of ethane (C$_2$H$_6$) heated from below while the applied temperature difference $ΔT$ straddled the liquid-vapor co-existance curve $T_ϕ(P)$. When the sample top temperature $T_t$ decreased below $T_ϕ$, droplet condensation occurred and the latent heat of vaporization $H$ provided an additional heat-transport mechanism.The effective conductivity $λ_{eff}$ increased linearly with decreasing $T_t$, and reached a maximum value $λ_{eff}^*$ that was an order of magnitude larger than the single-phase $λ_{eff}$. As $P$ approached the critical pressure, $λ_{eff}^*$ increased dramatically even though $H$ vanished. We attribute this phenomenon to an enhanced droplet-nucleation rate as the critical point is approached.

physics.flu-dyn↗
arXiv2008

Non-Oberbeck-Boussinesq effects in turbulent thermal convection in ethane close to the critical point

As shown in earlier work (Ahlers et al., J. Fluid Mech. 569, p.409 (2006)), non-Oberbeck Boussinesq (NOB) corrections to the center temperature in turbulent Rayleigh-Benard convection in water and also in glycerol are governed by the temperature dependences of the kinematic viscosity and the thermal diffusion coefficient. If the working fluid is ethane close to the critical point the origin of non-Oberbeck-Boussinesq corrections is very different, as will be shown in the present paper. Namely, the main origin of NOB corrections then lies in the strong temperature dependence of the isobaric thermal expansion coefficient β(T). More precisely, it is the nonlinear T-dependence of the density ρ(T) in the buoyancy force which causes another type of NOB effect. We demonstrate that through a combination of experimental, numerical, and theoretical work, the latter in the framework of the extended Prandtl-Blasius boundary layer theory developed in Ahlers et al., J. Fluid Mech. 569, p.409 (2006). The latter comes to its limits, if the temperature dependence of the thermal expension coefficient β(T) is significant.

physics.flu-dyn↗
arXiv2005

Early time evolution of Freedericks patterns generated from states of electroconvection

We report on the early time ordering in a nematic liquid crystal subjected to a sudden change in external ac electric field. We compare time evolution for two different initial states of electroconvection. Electroconvection is a highly driven state of a nematic liquid crystal involving convective motion of the fluid and periodic variations of the molecular alignment. By suddenly changing either the voltage or the frequency of the applied ac field, the system is brought to the same thermodynamic conditions. The time ordering of the system is characterized by the evolution of features of the power spectrum, including the average wavenumber, total power, and shape of the the power spectrum. The differences between the two classes of quenches are discussed, as well as the possibility of scaling behavior during this initial phase of domain growth.

cond-mat.soft↗
arXiv2005

Reynolds numbers of the large-scale flow in turbulent Rayleigh-Benard Convection

We measured Reynolds numbers R_e of turbulent Rayleigh-Benard convection over the Rayleigh-number range 2 times 10^8 < R < 10^11 and Prandtl-number range 3.3 < sigma < 29 for cylindrical samples of aspect ratio Gamma = 1. For R < R_c = 3 times 10^9 we found R_e ~ R^beta_eff with beta_eff = 0.46 < 1/2. Here both the sigma- and R-dependences are quantitatively consistent with the Grossmann-Lohse (GL) prediction. For R > R_c we found R_e = 0.106 sigma^-3/4 R^1/2, which differs from the GL prediction. The relatively sharp transition at R_c to the large-R regime suggests a qualitative and sudden change that renders the GL prediction inapplicable.

physics.flu-dyn↗
arXiv2005

Heat transport by turbulent Rayleigh-Benard Convection in cylindrical samples with aspect ratio one and larger

We present high-precision measurements of the Nusselt number N as a function of the Rayleigh number R for cylindrical samples of water (Prandtl number sigma = 4.38) with diameters D = 49.7, 24.8, and 9.2 cm, all with aspect ratio Gamma = D/L = 1 (L is the sample height). In addition, we present data for D = 49.7 and Gamma = 1.5, 2, 3, and 6. For each sample the data cover a range of a little over a decade of R. For Gamma = 1 they jointly span the range 10^7 < R < 10^11. Where needed, the data were corrected for the influence of the finite conductivity of the top and bottom plates and of the side walls on the heat transport in the fluid to obtain estimates of N_infinity for plates with infinite conductivity and sidewalls of zero conductivity. For Gamma = 1 the effective exponent gamma_eff of N_infinity = N_0 R^gamma_eff ranges from 0.28 near R = 10^8 to 0.333 near R = 7 times10^10. For R < 10^10 the results are consistent with the Grossmann-Lohse model. For larger R, where the data indicate that N_infinity(R) = R^1/3, the theory has a smaller gamma_eff than 1/3 and falls below the data. The data for Gamma > 1 are only a few percent smaller than the Gamma = 1 results.

physics.flu-dyn↗
arXiv2005

Heat transport in turbulent Rayleigh-Benard convection: Effect of finite top- and bottom-plate conductivity

We describe three apparatus, known as the large, medium, and small apparatus, used for high-precision measurements of the Nusselt number N as a function of the Rayleigh number R for cylindrical samples of fluid and present results illustrating the influence of the finite conductivity of the top and bottom plates on the heat transport in the fluid. We used water samples at a mean temperature of 40 degrees C (Prandtl number sigma = 4.4). The samples in the large apparatus had a diameter D of 49.69 cm and heights L = 116.33, 74.42, 50.61, and 16.52 cm. For the medium apparatus we had D = 24.81 cm, and L = 90.20 and 24.76 cm. The small apparatus contained a sample with D = 9.21 cm, and L = 9.52 cm. For each aspect ratio Gamma = D/L the data covered a range of a little over a decade of R. The maximum R = 10^12 with Nusselt numbers N = 600 was reached for Gamma = 0.43. Measurements were made with both Aluminum and Copper top and bottom plates of nominally identical size and shape. For the large and medium apparatus the results with Aluminum plates fall below those obtained with Copper plates, thus confirming qualitatively the prediction by Verzicco that plates of finite conductivity diminish the heat transport in the fluid. The Nusselt number N_infinity for plates with infinite conductivity was estimated by fitting simultaneously Aluminum- and Copper-plate data sets to an effective powerlaw for N_infinity multiplied by a correction factor f(X) = 1 - exp[-(aX)^b] that depends on the ratio X of the thermal resistance of the fluid to that of the plates as suggested by Verzicco. Within their uncertainties the parameters a and b were independent of Gamma for the large apparatus and showed a small Gamma-dependence for the medium apparatus. The correction was larger for the large, smaller for the medium, and negligible for the small apparatus.

physics.flu-dyn↗
arXiv2004

Heat transport by turbulent Rayleigh-B'enard Convection in cylindrical cells with aspect ratio one and less

We present high-precision measurements of the Nusselt number N as a function of the Rayleigh number R for cylindrical samples of water (Prandtl number sigma = 4.4) with a diameter D of 49.7 cm and heights L = 116.3, 74.6, and 50.6 cm, as well as for D = 24.8 cm and L = 90.2 cm. For each aspect ratio Gamma = D/L = 0.28, 0.43, 0.67, and 0.98 the data cover a range of a little over a decade of R. The maximum R ~= 10^12 and Nusselt number N ~= 600 were reached for Gamma = 0.43 and D = 49.7. The data were corrected for the influence of the finite conductivity of the top and bottom plates on the heat transport in the fluid to obtain estimates of N_infty for plates with infinite conductivity. The results for N_infty and Gamma >= 0.43 are nearly independent of Gamma. For Gamma = 0.275 N_infty falls about 2.5 % below the other data. For R ~<= 10^11, the effective exponent gamma_eff of N_infty = N_0 R^gamma_eff is about 0.321, larger than those of the Grossmann-Lohse model with its current parameters by about 0.01. For the largest Rayleigh numbers covered for Gamma = 0.98, 0.67, and 0.43, gamma_eff saturates at the asymptotic value gamma = 1/3 of the Grossmann-Lohse model. The data do not reveal any crossover to a Kraichnan regime with gamma_eff > 1/3.

physics.flu-dyn↗
arXiv2004

Plume motion and large-scale circulation in a cylindrical Rayleigh-Bénard cell

We used the time correlation of shadowgraph images to determine the angle $Θ$ of the horizontal component of the plume velocity above (below) the center of the bottom (top) plate of a cylindrical Rayleigh-Bénard cell of aspect ratio $Γ\equiv D/L = 1$ ($D$ is the diameter and $L \simeq 87$ mm the height) in the Rayleigh-number range $7\times 10^7 \leq R \leq 3\times 10^{9}$ for a Prandtl number $σ= 6$. We expect that $Θ$ gives the direction of the large-scale circulation. It oscillates time-periodically. Near the top and bottom plates $Θ(t)$ has the same frequency but is anti-correlated.

nlin.CD↗
arXiv2003

Dependence of Striped Domain Growth on Background Wavenumber

We report on the growth of domains of standing waves in electroconvection in a nematic liquid crystal. An ac voltage is applied to the system, forming an initial state that consists of travelling striped patterns with two different wavenumbers, zig and zag rolls. The standing waves are generated by suddenly applying a periodic modulation of the amplitude of the applied voltage that is approximately resonant with the travelling frequency of the pattern. By varying the modulation frequency, we are able to vary the steady-state, average wavenumber. We characterize the growth by measuring the structure factor for the pattern, the amplitude of the pattern, and the domain-wall length. An interesting feature of the growth is that the evolution of the domain-wall length is strongly affected by changing the selected wavenumber; whereas, the evolution of the structure factor is less sensitive to such changes.

cond-mat.soft↗