arXiv Science⌕ Search

arXiv subjects

Debabrata Mandal

Publications and source records attributed to Debabrata Mandal.

11 recordsLinked to original sources

Broadband Mid-Wave Infrared Imaging Enabled by All-Silicon Hyperboloid Metalens

The mid-wave infrared (MWIR, 3-5 microns) is indispensable for thermal sensing, gas detection, long-range imaging, and free-space optical communications. Meta-optics offer a compact, lightweight, and potentially low-cost alternative to conventional refractive optics, making them attractive for size, weight, and power (SWaP)-constrained systems. However, their strong chromatic dispersion has largely restricted imaging to narrow spectral bands. Here, we demonstrate broadband imaging across the full 3-5 micron MWIR band using a single-layer silicon metasurface coupled with computational reconstruction. Remarkably, the reconstruction model is adapted using only four image captures, overcoming large training data requirements and enabling broadband image recovery despite the strongly wavelength-dependent optical response. In contrast to approaches that engineer complex, dispersion-optimized metalens profiles for broadband operation, our method leverages the wavelength-dependent information encoded by a simple 2cm diameter hyperboloid metalens. We show that this metasurface captures sufficient broadband intensity information for computational reconstruction across the entire MWIR band. These results establish a simple route toward broadband computational meta-optics without requiring broadband achromatic metalens designs, offering a promising platform for compact MWIR imaging systems.

physics.optics↗

Conditional Imaging for Privacy-Preserving Visual Sensing

Conventional visual sensing faces a fundamental dilemma: information that should remain private today may need to be recovered tomorrow. This challenge is becoming increasingly important as cameras become pervasive in our daily surroundings. Existing safeguards either protect visual content only after an image is formed or suppress information during capture in ways that prevent its later recovery. Here, we show through an information-theoretic analysis that privacy and recoverability cannot be achieved simultaneously in static optical systems. Information preserved in a measurement for later reconstruction also remains available to an observer of that measurement, limiting the privacy such systems can provide. To overcome this limitation, we introduce conditional imaging, an imaging approach that changes the optical state for every captured frame. The measurement alone conceals the scene, while knowledge of the corresponding physical system state enables its reconstruction. We analyze how the optical parameters determine the information that can be recovered and use this analysis to guide the design of a camera prototype. We evaluate the system on a captured dataset of human faces using increasingly powerful attempts to recover the scene, from direct visualization and computational inversion to learned reconstruction and identity recognition. Our experiments show that conditional imaging preserves identity in authorized reconstructions while withholding visual information from observers without access to the system state. By making the physical state of the camera part of the information needed for reconstruction, conditional imaging enables visual information to be protected at the point of capture while remaining recoverable for future authorized use.

cs.CV↗

EPIC: Epipolar-Consistent 360° Immersive Stereo Video Generation

Immersive displays can enable rich and diverse virtual experiences. Manually authoring every possible experience to realize this potential, however, is prohibitively expensive, difficult to scale, and impractical. Generative AI models could remove this bottleneck, but today's models are built for conventional displays and cannot generate the high-resolution, stereoscopic $360^\circ$ content required for immersive viewing. Further, temporal and stereo inconsistencies that may be tolerable on conventional displays can become highly disruptive when viewed through an immersive headset. Here, we address this gap with a zero-shot generative pipeline that extends existing video diffusion models into 4K stereoscopic $360^\circ$ videos. Inspired from binocular vision and depth perception, we develop an epipolar-aware $360^\circ$ image matching metric that captures the temporal and stereo geometric inconsistencies across views. We then use this metric as a preference signal for direct preference optimization with limited training data. Our work enables $360^\circ$ stereo video generation and provides a scalable path for bringing generative content to immersive displays, allowing diverse mixed reality experiences on demand.

cs.CV↗

DeltaCam: Differential Intrinsic Camera Modeling for Video Generation

Incorporating camera intrinsics into video generation models offers a principled way to control not only scene dynamics but also the imaging process that governs visual appearance. Prior work has primarily focused on extrinsic control, such as camera pose and motion, while treating intrinsic camera parameters as implicit or fixed. A key bottleneck is the lack of large-scale video datasets with accurate and diverse temporally varying camera metadata, which makes learning absolute camera parameterizations difficult. As a result, current models struggle to incorporate photographic camera behavior, including depth-of-field transitions, exposure variations, lens distortions, and color processing, in a controllable and temporally consistent manner. We introduce DeltaCam, a video diffusion framework that models camera behavior through $Δ$-parameterized neural camera adaptors, operating on relative changes in camera motion and intrinsics instead of absolute states. By learning this differential formulation from synthetic video data, we mitigate reliance on precise real-world camera labels and enable smooth, consistent control over imaging factors such as focal length, aperture, ISO, color temperature, and lens distortion. We extend this framework to real-world footage through two mechanisms: finetuning the controls on real image-metadata pairs for precise shot matching, and extracting disentangled embeddings for implicit video-to-video style transfer without requiring explicit camera parameters. By effectively separating scene content from intrinsic imaging behavior, DeltaCam enables camera-consistent video generation and editing operations that are difficult to achieve with existing models. Ultimately, our results establish a practical and scalable approach for bridging synthetic control and real-world photographic emulation.

cs.CV↗

UnSCAR: Universal, Scalable, Controllable, and Adaptable Image Restoration

Universal image restoration aims to recover clean images from arbitrary real-world degradations using a single inference model. Despite significant progress, existing all-in-one restoration networks do not scale to multiple degradations. As the number of degradations increases, training becomes unstable, models grow excessively large, and performance drops across both seen and unseen domains. In this work, we show that scaling universal restoration is fundamentally limited by interference across degradations during joint learning, leading to catastrophic task forgetting. To address this challenge, we introduce a unified inference pipeline with a multi-branch mixture-of-experts architecture that decomposes restoration knowledge across specialized task-adaptable experts. Our approach enables scalable learning (over sixteen degradations), adapts and generalizes robustly to unseen domains, and supports user-controllable restoration across degradations. Beyond achieving superior performance across benchmarks, this work establishes a new design paradigm for scalable and controllable universal image restoration.

cs.CV↗

Enabling High-Quality In-the-Wild Imaging from Severely Aberrated Metalens Bursts

We tackle the challenge of robust, in-the-wild imaging using ultra-thin nanophotonic metalens cameras. Meta-lenses, composed of planar arrays of nanoscale scatterers, promise dramatic reductions in size and weight compared to conventional refractive optics. However, severe chromatic aberration, pronounced light scattering, narrow spectral bandwidth, and low light efficiency continue to limit their practical adoption. In this work, we present an end-to-end solution for in-the-wild imaging that pairs a metalens several times thinner than conventional optics with a bespoke multi-image restoration framework optimized for practical metalens cameras. Our method centers on a lightweight convolutional network paired with a memory-efficient burst fusion algorithm that adaptively corrects noise, saturation clipping, and lens-induced distortions across rapid sequences of extremely degraded metalens captures. Extensive experiments on diverse, real-world handheld captures demonstrate that our approach consistently outperforms existing burst-mode and single-image restoration techniques.These results point toward a practical route for deploying metalens-based cameras in everyday imaging applications.

physics.optics↗

Aberration Correcting Vision Transformers for High-Fidelity Metalens Imaging

Metalens is an emerging optical system with an irreplaceable merit in that it can be manufactured in ultra-thin and compact sizes, which shows great promise in various applications. Despite its advantage in miniaturization, its practicality is constrained by spatially varying aberrations and distortions, which significantly degrade the image quality. Several previous arts have attempted to address different types of aberrations, yet most of them are mainly designed for the traditional bulky lens and ineffective to remedy harsh aberrations of the metalens. While there have existed aberration correction methods specifically for metalens, they still fall short of restoration quality. In this work, we propose a novel aberration correction framework for metalens-captured images, harnessing Vision Transformers (ViT) that have the potential to restore metalens images with non-uniform aberrations. Specifically, we devise a Multiple Adaptive Filters Guidance (MAFG), where multiple Wiener filters enrich the degraded input images with various noise-detail balances and a cross-attention module reweights the features considering the different degrees of aberrations. In addition, we introduce a Spatial and Transposed self-Attention Fusion (STAF) module, which aggregates features from spatial self-attention and transposed self-attention modules to further ameliorate aberration correction. We conduct extensive experiments, including correcting aberrated images and videos, and clean 3D reconstruction. The proposed method outperforms the previous arts by a significant margin. We further fabricate a metalens and verify the practicality of our method by restoring the images captured with the manufactured metalens. Code and pre-trained models are available at https://benhenryl.github.io/Metalens-Transformer.

eess.IV↗

UniCoRN: Latent Diffusion-based Unified Controllable Image Restoration Network across Multiple Degradations

Image restoration is essential for enhancing degraded images across computer vision tasks. However, most existing methods address only a single type of degradation (e.g., blur, noise, or haze) at a time, limiting their real-world applicability where multiple degradations often occur simultaneously. In this paper, we propose UniCoRN, a unified image restoration approach capable of handling multiple degradation types simultaneously using a multi-head diffusion model. Specifically, we uncover the potential of low-level visual cues extracted from images in guiding a controllable diffusion model for real-world image restoration and we design a multi-head control network adaptable via a mixture-of-experts strategy. We train our model without any prior assumption of specific degradations, through a smartly designed curriculum learning recipe. Additionally, we also introduce MetaRestore, a metalens imaging benchmark containing images with multiple degradations and artifacts. Extensive evaluations on several challenging datasets, including our benchmark, demonstrate that our method achieves significant performance gains and can robustly restore images with severe degradations. Project page: https://codejaeger.github.io/unicorn-gh

cs.CV↗

Superior-catalytic performance of Ni-Co Layered double hydroxide nanosheets for the reduction of p-nitrophenol

Layered double-hydroxides (LDHs) are superior to the conventional (Transition Metal Oxides) TMOs as their lamellar morphology accommodates higher active sites contributing to the facile electron transfer towards the material degradation relations, thus attracts an immense attention for catalysis application. Moreover, the high catalytic activity of LDHs is linked to their facile anion exchange, specific electronic structures, and versatile chemical compositions. Recently, LDHs with bimetallic or ternary combinations are preferably used for hydrogenation of p-nitrophenol, a toxic and carcinogenic pollutant commonly found in industrial wastewater. Herein, a cost-effective co-precipitation fabrication protocol to obtain Ni-Co layered double hydroxide is proposed. The well-defined arrangement of active sites in the 2D structure of LDH, and the synergistic catalytic effect of Ni and Co greatly improves the efficiency for the conversion of p-nitrophenol (p-NP) to p-aminophenol (p-AMP). The catalytic performance at higher temperatures is also shown. The obtained results are further extended to explore the advantage of Ni-Co LDH as an electrocatalyst for Hydrogen Evolution Reaction (HER).

cond-mat.mtrl-sci↗

Role of porosity and diffusion coefficient in porous electrode used in supercapacitors- Correlating theoretical and experimental studies

Porous electrodes are fast emerging as essential components for next generation supercapacitors. Using porous structures of Co3O4, Mn3O4, alpha Fe2O3, and carbon, their advantages over the solid counterpart is unequivocally established. The improved performance in porous architecture is linked to the enhanced active specific surface and direct channels leading to improved electrolyte interaction with the redox active sites. A theoretical model utilizing the Fick's law is proposed, that can consistently explain the experimental data. The porous structures exhibit nearly 50 - 80 percentage increment in specific capacitance, along with high rate capabilities and excellent cycling stability due to the higher diffusion coefficients.

cond-mat.mtrl-sci↗

Extension of Fuzzy h-ideals in $Γ$-hemirings

In this paper the concept of the extension of fuzzy h-ideals in one-sided $Γ$-hemiring is introduced and some of its properties are investigated. Specially we have studied the extension of prime fuzzy h-ideals in $Γ$-hemirings and gave its characterization.

math.GM↗