arXiv subjects

De Mi

Publications and source records attributed to De Mi.

At least 19 recordsLinked to original sources

arXiv2026

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

eess.AS↗

arXiv2026

Knowledge Distillation Driven Semantic NOMA with GAN Refinement for 6G Robotic Vehicle Networks

To achieve sustainable intelligent mobility, 6G-empowered robotic vehicles (RVs) require high-fidelity visual perception under stringent bandwidth and energy constraints. Semantic communication offers a spectral-efficient solution but suffers from severe interference in uplink non-orthogonal multiple access (NOMA) RV networks. To address this, we propose a knowledge distillation-driven and generative models-enhanced NOMA framework for robust and green RV communications, named KDG-SemNOMA. First, we develop a ConvNeXt-based deep joint source-channel coding (DeepJSCC) architecture with an enhanced attention feature (AF) module for dynamic channel adaptation. Second, to mitigate interference without inference overhead, an orthogonal transmission teacher model guides the NOMA student model via a two-stage knowledge distillation strategy. Finally, to address the over-smoothing artifacts of pixel-wise optimization, we introduce a channel-conditional GAN (cGAN). By explicitly taking the Stage-I initial reconstruction and channel states as conditional inputs, this module refines coarse outputs into high-fidelity images with realistic textures. Experiments on FFHQ-256 demonstrate that KDG-SemNOMA significantly outperforms state-of-the-art methods in both pixel-level accuracy and perceptual fidelity.

cs.IT↗

arXiv2026

Rydberg Atomic Receivers for Net-Zero 6G Wireless Communication and Sensing: Progress, Experiments, and Sustainable Prospects

Against the backdrop of the global drive to advance the green transformation of the information and communications technology (ICT) industry and leverage technological innovation to facilitate the achievement of Net-Zero carbon goals, research into Rydberg atomic receivers (RAREs) is gaining significant interest. RAREs leverage the electron transition phenomenon for signal reception, offering significant advantages over conventional radio frequency receivers in terms of miniaturized antenna design, high sensitivity, robust interference resistance, and compact form factors, which positions them as a competitive alternative for meeting zero-carbon communication demands. This article systematically elaborates on the basic principle, state-of-the-art progress, and novel experiments of RAREs in quantum wireless communication and sensing. In this first-of-its-kind work, we experimentally verify the RARE-based orthogonal frequency division multiplexing transmission and reveal the potential of deep learning design in optimizing quantum wireless systems. Finally, we delve into the prospect of integrating RARE with existing cutting-edge application scenarios, while mapping out critical pathways for developing Rydberg-based wireless systems.

eess.SP↗

arXiv2026

From Connectivity to Multi-Orbit Intelligence: Space-Based Data Center Architectures for 6G and Beyond

Direct handset-to-satellite (DHTS) communication is emerging as a core capability of 6G non-terrestrial networks, enabling standard devices to directly access low Earth orbit (LEO) satellites. While LEO provides the physical access layer for DHTS, large-scale device connectivity introduces challenges in mobility management, interference control, spectrum efficiency, and constellation-wide coordination. Relay-only LEO architectures are insufficient to manage massive handset access under dynamic traffic and energy constraints. This article introduces a hierarchical architecture in which direct handset-to-LEO access is supported by multi-orbit space-based data centers (SBDCs) spanning LEO, medium Earth orbit (MEO), and geostationary Earth orbit (GEO). In this framework, LEO satellites handle radio access and real-time inference, while higher orbital layers provide regional aggregation, global orchestration, and compute-aware routing. By embedding distributed in-orbit computing, energy-aware scheduling, and AI-driven hierarchical control, the constellation evolves from a passive relay network into an intelligent multi-layer system capable of supporting large-scale DHTS services. We discuss key enabling technologies, envisioned multi-orbit integrated Earth-space compute architecture, and open research challenges in integrating multi-orbit computing, highlighting pathways toward scalable and resilient 6G DHTS networks.

cs.ET↗

arXiv2026

Solving the Post-Quantum Control Plane Bottleneck: Energy-Aware Cryptographic Scheduling in Open RAN

The Open Radio Access Network (O-RAN) offers flexibility and innovation but introduces unique security vulnerabilities, particularly from cryptographically relevant quantum computers. While Post-Quantum Cryptography (PQC) is the primary scalable defence, its computationally intensive handshakes create a significant bottleneck for the RAN control plane, posing sustainability challenges. This paper proposes an energy-aware framework to solve this PQC bottleneck, ensuring quantum resilience without sacrificing operational energy efficiency. The system employs an O-RAN aligned split: a Crypto Policy rApp residing in the Non-Real-Time (Non-RT) RIC defines the strategic security envelope (including PQC suites), while a Security Operations Scheduling (SOS) xApp in the Near-RT RIC converts these into tactical timing and placement intents. Cryptographic enforcement remains at standards-compliant endpoints: the Open Fronthaul utilizes Media Access Control Security (MACsec) at the O-DU/O-RU, while the xhaul (midhaul and backhaul) utilizes IP Security (IPsec) at tunnel terminators. The SOS xApp reduces PQC overhead by batching non-urgent handshakes, prioritizing session resumption, and selecting parameters that meet slice SLAs while minimizing joules per secure connection. We evaluate the architecture via a Discrete-Event Simulation (DES) using 3GPP-aligned traffic profiles and verified hardware benchmarks from literature. Results show that intelligent scheduling can reduce per-handshake energy by approximately 60 percent without violating slice latency targets.

cs.CR↗

arXiv2025

Pre-Equalization Aided Grant-Free Massive Access in Massive MIMO System

The spatial diversity and multiplexing advantages of massive multi-input-multi-output (mMIMO) can significantly improve the capacity of massive non-orthogonal multiple access (NOMA) in machine type communications. However, state-of-the-art grant-free massive NOMA schemes for mMIMO systems require accurate estimation of random access channels to perform activity detection and the following coherent data demodulation, which suffers from excessive pilot overhead and access latency. To address this, we propose a pre-equalization aided grant-free massive access scheme for mMIMO systems, where an iterative detection scheme is conceived. Specifically, the base station (BS) firstly activates one of its antennas (i.e., beacon antenna) to broadcast a beacon signal, which facilitates the user equipment (UEs) to perform downlink channel estimation and pre-equalize the uplink random access signal with respect to the channels associated with the beacon antenna. During the uplink transmission stage, the BS detects UEs' activity and data by using the proposed iterative detection algorithm, which consists of three modules: coarse data detection (DD), data-aided channel estimation (CE), and fine DD. In the proposed algorithm, the joint activity and DD is firstly performed based on the signals received by the beacon antenna. Subsequently, the DD is further refined by iteratively performing data-aided CE module and fine DD module using signals received by all BS antennas. Our simulation results demonstrate that the proposed scheme outperforms state-of-the-art mMIMO-based grant-free massive NOMA schemes with the same access latency. Simulation codes are provided to reproduce the results in this article: https://github.com/owenwang517/tvt-2025.

eess.SP↗

arXiv2024

Large Language Model-Driven Curriculum Design for Mobile Networks

This study introduces an innovative framework that employs large language models (LLMs) to automate the design and generation of curricula for reinforcement learning (RL). As mobile networks evolve towards the 6G era, managing their increasing complexity and dynamic nature poses significant challenges. Conventional RL approaches often suffer from slow convergence and poor generalization due to conflicting objectives and the large state and action spaces associated with mobile networks. To address these shortcomings, we introduce curriculum learning, a method that systematically exposes the RL agent to progressively challenging tasks, improving convergence and generalization. However, curriculum design typically requires extensive domain knowledge and manual human effort. Our framework mitigates this by utilizing the generative capabilities of LLMs to automate the curriculum design process, significantly reducing human effort while improving the RL agent's convergence and performance. We deploy our approach within a simulated mobile network environment and demonstrate improved RL convergence rates, generalization to unseen scenarios, and overall performance enhancements. As a case study, we consider autonomous coordination and user association in mobile networks. Our obtained results highlight the potential of combining LLM-based curriculum generation with RL for managing next-generation wireless networks, marking a significant step towards fully autonomous network operations.

cs.LG↗

arXiv2024

AI-enabled STAR-RIS aided MISO ISAC Secure Communications

A simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) aided integrated sensing and communication (ISAC) dual-secure communication system is studied in this paper. The sensed target and legitimate users (LUs) are situated on the opposite sides of the STAR-RIS, and the energy splitting and time switching protocols are applied in the STAR-RIS, respectively. The long-term average security rate for LUs is maximized by the joint design of the base station (BS) transmit beamforming and receive filter, along with the STAR-RIS transmitting and reflecting coefficients, under guarantying the echo signal-to-noise ratio thresholds and rate constraints for the LUs. Since the channel information changes over time, conventional convex optimization techniques cannot provide the optimal performance for the system, and result in excessively high computational complexity in the exploration of the long-term gains for the system. Taking continuity control decisions into account, the deep deterministic policy gradient and soft actor-critic algorithms based on off-policy are applied to address the complex non-convex problem. Simulation results comprehensively evaluate the performance of the proposed two reinforcement learning algorithms and demonstrate that STAR-RIS is remarkably better than the two benchmarks in the ISAC system.

eess.SP↗

arXiv2023

RIS-Aided Receive Generalized Spatial Modulation Design with Reflecting Modulation

Spatial modulation (SM) transmits additional information bits by the selection of antennas. Generalized spatial modulation (GSM), as an advanced type of SM, can be divided into diversity and multiplexing (MUX) schemes according to the symbols carried on the selected antennas are identical or different. Recently, reconfigurable intelligent surface (RIS) assisted SM exhibits better reception performance compared to conventional SM. To overcome the limitations of SM, this paper combines GSM with RIS and proposes the RIS-aided receive generalized spatial modulation (RIS-RGSM) scheme. The RIS-RGSM diversity scheme is realized via a simple improvement based on the state-of-the-art scheme. To further increase the transmission rate, a novel RIS-RGSM MUX scheme is proposed, where the reflection phase shifts and on/off states of RIS elements are configured to achieve bit mapping. The theoretical bit error rate (BER) of the proposed scheme is derived and agrees well with the simulation results. Numerical simulations show that the RIS-RGSM MUX scheme has better BER performance than the diversity scheme. The proposed scheme can significantly increase the transmission rate and maintain good performance compared to the existing scheme under a limited number of antennas.

cs.IT↗

arXiv2023

Intelligent Reflective Surface Assisted Integrated Sensing and Wireless Power Transfer

Wireless sensing and wireless energy are enablers to pave the way for smart transportation and a greener future. In this paper, an intelligent reflecting surface (IRS) assisted integrated sensing and wireless power transfer (ISWPT) system is investigated, where the transmitter in transportation infrastructure networks sends signals to sense multiple targets and simultaneously to multiple energy harvesting devices (EHDs) to power them. In light of the performance tradeoff between energy harvesting and sensing, we propose to jointly optimize the system performance via optimizing the beamforming and IRS phase shift. However, the coupling of optimization variables makes the formulated problem non-convex. Thus, an alternative optimization approach is introduced and based on which two algorithms are proposed to solve the problem. Specifically, the first one involves a semi-definite program technique, while the second one features a low-complexity optimization algorithm based on successive convex approximation and majorization minimization. Our simulation results validate the proposed algorithms and demonstrate the advantages of using IRS to assist wireless power transfer in ISWPT systems.

eess.SP↗

arXiv2022

Massive Access in Extra Large-Scale MIMO with Mixed-ADC over Near Field Channels

Massive connectivity for extra large-scale multi-input multi-output (XL-MIMO) systems is a challenging issue due to the near-field access channels and the prohibitive cost. In this paper, we propose an uplink grant-free massive access scheme for XL-MIMO systems, in which a mixed-analog-to-digital converters (ADC) architecture is adopted to strike the right balance between access performance and power consumption. By exploiting the spatial-domain structured sparsity and the piecewise angular-domain cluster sparsity of massive access channels, a compressive sensing (CS)-based two-stage orthogonal approximate message passing algorithm is proposed to efficiently solve the joint activity detection and channel estimation problem. Particularly, high-precision quantized measurements are leveraged to perform accurate hyper-parameter estimation, thereby facilitating the activity detection. Moreover, we adopt a subarray-wise estimation strategy to overcome the severe angular-domain energy dispersion problem which is caused by the near-field effect in XL-MIMO channels. Simulation results verify the superiority of our proposed algorithm over state-of-the-art CS algorithms for massive access based on XL-MIMO with mixed-ADC architectures.

cs.IT↗

arXiv2021

A Novel Transmission Policy for Intelligent Reflecting Surface Assisted Wireless Powered Sensor Networks

This paper proposes a novel transmission policy for an intelligent reflecting surface (IRS) assisted wireless powered sensor network (WPSN). An IRS is deployed to enhance the performance of wireless energy transfer (WET) and wireless information transfer (WIT) by intelligently adjusting phase shifts of each reflecting elements. To achieve its self-sustainability, the IRS needs to collect energy from energy station to support its control circuit operation. Our proposed policy for the considered WPSN is called IRS assisted harvest-then-transmit time switching, which is able to schedule the transmission time slots by switching between energy collection and energy reflection modes. We study the achievable sum throughput of the proposed transmission policy and investigate a joint design of the transmission time slots, the power allocation, as well as the discrete phase shifts of the WET and WIT. This formulates the problem as a mixed-integer non-linear program, which is NP-hard and non-convex. We first relax it to one with continuous phase shifts, and then propose a two-step approach and decompose the original problem into two sub-problems. We solve the first sub-problem with respect to the phase shifts of the WIT in terms of closed-form expression. For the second sub-problem, we consider a special case without the circuit power of each sensor node, the Lagrange dual method and the KKT conditions are applied to derive the optimal closed-form transmission time slots, power allocation, and phase shift of the WET. Then we generalise the case with the circuit power of each sensor node, which can be solved via employing a semi-definite programming relaxation. The optimal discrete phase shifts can be obtained by quantizing the continuous values. Numerical results demonstrate the effectiveness of the proposed policy and validate the beneficial role of the IRS in comparison to the benchmark schemes.

eess.SP↗

arXiv2020

5G Radio Access Network Architecture for Terrestrial Broadcast Services

The 3rd Generation Partnership Project (3GPP) has defined based on the Long Term Evolution (LTE) enhanced Multicast Broadcast Multimedia Service (eMBMS) a set of new features to support the distribution of Terrestrial Broadcast services in Release 14. On the other hand, a new 5th Generation (5G) system architecture and radio access technology, 5G New Radio (NR), are being standardised from Release 15 onwards, which so far have only focused on unicast connectivity. This may change in Release 17 given a new Work Item set to specify basic Radio Access Network (RAN) functionalities for the provision of multicast/broadcast communications for NR. This work initially excludes some of the functionalities originally supported for Terrestrial Broadcast services under LTE e.g. free to air, receive-only mode, large-area single frequency networks, etc. This paper proposes an enhanced Next Generation RAN architecture based on 3GPP Release 15 with a series of architectural and functional enhancements, to support an efficient, flexible and dynamic selection between unicast and multicast/broadcast transmission modes and also the delivery of Terrestrial Broadcast services. The paper elaborates on the Cloud-RAN based architecture and proposes new concepts such as the RAN Broadcast/Multicast Areas that allows a more flexible deployment in comparison to eMBMS. High-level assessment methodologies including complexity analysis and inspection are used to evaluate the feasibility of the proposed architecture design and compare it with the 3GPP architectural requirements.

cs.NI↗

arXiv2020

Demonstrating Immersive Media Delivery on 5G Broadcast and Multicast Testing Networks

This work presents eight demonstrators and one showcase developed within the 5G-Xcast project. They experimentally demonstrate and validate key technical enablers for the future of media delivery, associated with multicast and broadcast communication capabilities in 5th Generation (5G). In 5G-Xcast, three existing testbeds: IRT in Munich (Germany), 5GIC in Surrey (UK), and TUAS in Turku (Finland), have been developed into 5G broadcast and multicast testing networks, which enables us to demonstrate our vision of a converged 5G infrastructure with fixed and mobile accesses and terrestrial broadcast, delivering immersive audio-visual media content. Built upon the improved testing networks, the demonstrators and showcase developed in 5G-Xcast show the impact of the technology developed in the project. Our demonstrations predominantly cover use cases belonging to two verticals: Media & Entertainment and Public Warning, which are future 5G scenarios relevant to multicast and broadcast delivery. In this paper, we present the development of these demonstrators, the showcase, and the testbeds. We also provide key findings from the experiments and demonstrations, which not only validate the technical solutions developed in the project, but also illustrate the potential technical impact of these solutions for broadcasters, content providers, operators, and other industries interested in the future immersive media delivery.

cs.NI↗

arXiv2020

Energy-Efficient Hybrid Precoding Design for Integrated Multicast-Unicast Millimeter Wave Communications with SWIPT

In this paper, we investigate the energy-efficient hybrid precoding design for integrated multicast-unicast millimeter wave (mmWave) system, where the simultaneous wireless information and power transform is considered at receivers. We adopt two sparse radio frequency chain antenna structures at the base station (BS), i.e., fully-connected and subarray structures, and design the codebook-based analog precoding according to the different structures. Then, we formulate a joint digital multicast, unicast precoding and power splitting ratio optimization problem to maximize the energy efficiency of the system, while the maximum transmit power at the BS and minimum harvested energy at receivers are considered. Due to its difficulty to directly solve the formulated problem, we equivalently transform the fractional objective function into a subtractive form one and propose a two-loop iterative algorithm to solve it. For the outer loop, the classic Bi-section iterative algorithm is applied. For the inner loop, we transform the formulated problem into a convex one by successive convex approximation techniques and propose an iterative algorithm to solve it. Meanwhile, to reduce the complexity of the inner loop, we develop a zero forcing (ZF) technique-based low complexity iterative algorithm. Specifically, the ZF technique is applied to cancel the inter-unicast interference and the first order Taylor approximation is used for the convexification of the non-convex constraints in the original problem. Finally, simulation results are provided to compare the performance of the proposed algorithms under different schemes.

cs.IT↗

arXiv2019

Mobility and Coverage Evaluation of New Radio PDCCH for Point-to-Multipoint Scenario

This paper provides the mobility and coverage evaluation of New Radio (NR) Physical Downlink Control Channel (PDCCH) for Point-to-Multipoint (PTM) use cases, e.g., eMBMS (evolved Multimedia Broadcast Multicast Services). The evaluation methodology is based on analyses and link level simulations where the channel model includes AWGN, TDL-A, TDL-C as well as a modified 0dB echo to model different PTM scenarios. The final version of this work aims to provide insightful guidelines on the delay/echo tolerance of the NR PDCCH in terms of mobility and coverage. In this paper, it is observed that under eMBMS scenario, i.e. SFN channel, due to the time domain granularity of pilots distributed inside the PDCCH region, the system can support very high user movement speed/Doppler with an relatively low requirement on the transmit Signal/Carrier-to-Noise Ratio (SNR/CNR). On the other hand however, the system falls short on its coverage due to the low frequency domain granularity of pilots that effects the channel estimation accuracy.

eess.SP↗

arXiv2019

Self-Calibration for Massive MIMO with Channel Reciprocity and Channel Estimation Errors

In time-division-duplexing (TDD) massive multiple-input multiple-output (MIMO) systems, channel reciprocity is exploited to overcome the overwhelming pilot training and the feedback overhead. However, in practical scenarios, the imperfections in channel reciprocity, mainly caused by radio-frequency mismatches among the antennas at the base station side, can significantly degrade the system performance and might become a performance limiting factor. In order to compensate for these imperfections, we present and investigate two new calibration schemes for TDD-based massive multi-user MIMO systems, namely, relative calibration and inverse calibration. In particular, the design of the proposed inverse calibration takes into account a compound effect of channel reciprocity error and channel estimation error. We further derive closed-form expressions for the ergodic sum rate, assuming maximum ratio transmissions with the compound effect of both errors. We demonstrate that the inverse calibration scheme outperforms the traditional relative calibration scheme. The proposed analytical results are also verified by simulated illustrations.

eess.SP↗

arXiv2019

On the Performance of PDCCH in LTE and 5G New Radio

5G New Radio (NR) Release 15 has been specified in June 2018. It introduces numerous changes and potential improvements for physical layer data transmissions, although only point-to-point (PTP) communications are considered. In order to use physical data channels such as the Physical Downlink Shared Channel (PDSCH), it is essential to guarantee a successful transmission of control information via the Physical Downlink Control Channel (PDCCH). Taking into account these two aspects, in this paper, we first analyze the PDCCH processing chain in NR PTP as well as in the state-of-the-art Long Term Evolution (LTE) point-to-multipoint (PTM) solution, i.e., evolved Multimedia Broadcast Multicast Service (eMBMS). Then, via link level simulations, we compare the performance of the two technologies, observing the Bit/Block Error Rate (BER/BLER) for various scenarios. The objective is to identify the performance gap brought by physical layer changes in NR PDCCH as well as provide insightful guidelines on the control channel configuration towards NR PTM scenarios.

cs.NI↗