arXiv subjects

Daying Sun

Publications and source records attributed to Daying Sun.

4 recordsLinked to original sources

arXiv2026

Accuracy-Configurable Floating-Point Multiplier Design for SRAM-Based Compute-in-Memory

Digital Compute-in-Memory (DCiM) reduces data movement and has become a promising solution for energy-efficient edge AI. However, most existing DCiM frameworks still primarily target integer or fixed-point arithmetic, and provide limited support for compiler-integrated and accuracy-configurable floating-point computation. Directly integrating conventional IEEE 754 floating-point units into dense SRAM-based DCiM arrays, however, incurs high area and power overhead. To address this challenge, this work presents an accuracy-configurable floating-point multiplier integrated into the OpenACM framework for SRAM-based DCiM. An exact IEEE~754-compliant multiplier is first implemented as a baseline, and a mantissa-segmentation-based approximate multiplier is then proposed to reduce hardware cost while preserving numerical fidelity. Post-layout results show up to 69% logic area reduction and 72% power savings over exact floating-point designs without delay overhead. Evaluations on image processing tasks and ResNet-18 inference further demonstrate negligible accuracy degradation. These results indicate that compiler-integrated approximate floating-point multiplication is a practical approach for enabling efficient and configurable floating-point support in SRAM-based DCiM systems. The Floating-Point Multiplier is available on https://github.com/ShenShan123/OpenACM

cs.AR↗

arXiv2026

R2G: A Multi-View Circuit Graph Benchmark Suite from RTL to GDSII

Graph neural networks (GNNs) are increasingly applied to physical design tasks such as congestion prediction and wirelength estimation, yet progress is hindered by inconsistent circuit representations and the absence of controlled evaluation protocols. We present R2G (RTL-to-GDSII), a multi-view circuit-graph benchmark suite that standardizes five stage-aware views with information parity (every view encodes the same attribute set, differing only in where features attach) over 30 open-source IP cores (up to $10^6$ nodes/edges). R2G provides an end-to-end DEF-to-graph pipeline spanning synthesis, placement, and routing stages, together with loaders, unified splits, domain metrics, and reproducible baselines. By decoupling representation choice from model choice, R2G isolates a confound that prior EDA and graph-ML benchmarks leave uncontrolled. In systematic studies with GINE, GAT, and ResGatedGCN, we find: (i) view choice dominates model choice, with Test R$^2$ varying by more than 0.3 across representations for a fixed GNN; (ii) node-centric views generalize best across both placement and routing; and (iii) decoder-head depth (3--4 layers) is the primary accuracy driver, turning divergent training into near-perfect predictions (R$^2$$>$0.99). Code and datasets are available at https://github.com/ShenShan123/R2G.

cs.CV↗

arXiv2026

OpenACMv2: An Accuracy-Constrained Co-Optimization Framework for Approximate DCiM

Digital Compute-in-Memory (DCiM) accelerates neural networks by reducing data movement. Approximate DCiM can further improve power-performance-area (PPA), but demands accuracy-constrained co-optimization across coupled architecture and transistor-level choices. Building on OpenYield, we introduce Accuracy-Constrained Co-Optimization (ACCO) and present OpenACMv2, an open framework that operationalizes ACCO via two-level optimization: (1) accuracy-constrained architecture search of compressor combinations and SRAM macro parameters, driven by a fast GNN-based surrogate for PPA and error; and (2) variation- and PVT-aware transistor sizing for standard cells and SRAM bitcells using Monte Carlo. By decoupling ACCO into architecture-level exploration and circuit-level sizing, OpenACMv2 integrates classic single- and multi-objective optimizers to deliver strong PPA-accuracy tradeoffs and robust convergence. The workflow is compatible with FreePDK45 and OpenROAD, supporting reproducible evaluation and easy adoption. Experiments show that the proposed two-level ACCO framework achieves most of its accuracy-constrained efficiency gain at Level-1 through architecture exploration, delivering roughly 50%+ PDP reduction, while Level-2 transistor-level optimization provides a further single-digit PDP improvement while preserving accuracy, enabling rapid "what-if" exploration for approximate DCiM. The framework is available on GitHub (https://github.com/ShenShan123/OpenACM).

cs.LG↗

arXiv2026

OpenACM: An Open-Source SRAM-Based Approximate CiM Compiler

The rise of data-intensive AI workloads has exacerbated the ``memory wall'' bottleneck. Digital Compute-in-Memory (DCiM) using SRAM offers a scalable solution, but its vast design space makes manual design impractical, creating a need for automated compilers. A key opportunity lies in approximate computing, which leverages the error tolerance of AI applications for significant energy savings. However, existing DCiM compilers focus on exact arithmetic, failing to exploit this optimization. This paper introduces OpenACM, the first open-source, accuracy-aware compiler for SRAM-based approximate DCiM architectures. OpenACM bridges the gap between application error tolerance and hardware automation. Its key contribution is an integrated library of accuracy-configurable multipliers (exact, tunable approximate, and logarithmic), enabling designers to make fine-grained accuracy-energy trade-offs. The compiler automates the generation of the DCiM architecture, integrating a transistor-level customizable SRAM macro with variation-aware characterization into a complete, open-source physical design flow based on OpenROAD and the FreePDK45 library. This ensures full reproducibility and accessibility, removing dependencies on proprietary tools. Experimental results on representative convolutional neural networks (CNNs) demonstrate that OpenACM achieves energy savings of up to 64\% with negligible loss in application accuracy. The framework is available on \href{https://github.com/ShenShan123/OpenACM}{OpenACM:URL}

cs.AR↗