arXiv subjects

David Saldaña

Publications and source records attributed to David Saldaña.

At least 19 recordsLinked to original sources

arXiv2026

Planning Trajectories that Bounce: Reflection Classes for Collision-Tolerant Robots

Robot navigation methods tend to avoid contact, and consequently search for collision-free trajectories. For robots with high inertia and limited maneuverability, however, avoiding contact can require substantial steering effort and time, even when interactions with surrounding surfaces could be safely exploited. In this paper, we develop a planning method that deliberately uses controlled wall reflections to generate trajectories that can be easier and more efficient to execute than purely collision-free motion. We consider planar navigation in environments where a mobile robot is permitted to bounce off surrounding surfaces. To represent the resulting alternatives, we construct a reflection-augmented state graph in which paths are partitioned into distinct classes according to the sequence of walls used for reflection. This representation enables systematic enumeration of reflection strategies and identification of the lowest-cost path within each class. We show that, although a reflecting path cannot be shorter than the shortest collision-free path, it can reduce execution time and actuation effort by replacing costly changes in heading with controlled environmental interactions. The planned trajectories are executed using a contact-aware sampling-based controller with the robot's full dynamics. In our experiments, we demonstrate that in our simulated test scenario, the best reflecting class can reduce time and control effort. Our results show that controlled contact can provide dynamically advantageous navigation strategies that are excluded by conventional collision-avoidance formulations.

cs.RO↗

arXiv2026

HINT-Blimp: Human INTent Inference from Multimodal Cues for Robotic Blimps

In human-robot interaction, traditional interfaces such as joysticks and handheld tablets introduce latency into navigation tasks and require the operator's explicit attention on the device, instead of the robot. We propose a new human-robot interaction framework in which a human communicates intent directly through sparse multimodal signals such as physical pushes and spoken commands. Human intent is represented as a parameterized linear dynamical system (LDS) that encodes the desired goal and motion behavior. The robot estimates this intent (parameters) online using a particle filter, where each particle represents a candidate LDS hypothesis and is reweighted online as new information becomes available. We validate this framework on a robotic blimp, whose inherent compliance and collision tolerance make it well-suited for repeated physical interaction. Experiments with multiple participants across 300 trials show that combining pushes and voice commands identifies the intended goal in 86% of trials within at most five interactions, with most trials resolved in two. The inferred dynamical systems can also produce curved trajectories that avoid obstacles known only to the human.

cs.RO↗

arXiv2026

AirBender: Adaptive Transportation of Bendable Objects Using Dual UAVs

The interaction of robots with bendable objects in midair presents significant challenges in control, often resulting in performance degradation and potential crashes, especially for aerial robots due to their limited actuation capabilities and constant need to remain airborne. This paper presents an adaptive controller that enables two aerial vehicles to collaboratively follow a trajectory while transporting a bendable object without relying on explicit elasticity models. Our method allows on-the-fly adaptation to the object's unknown deformable properties, ensuring stability and performance in trajectory-tracking tasks. We use Lyapunov analysis to demonstrate that our adaptive controller is asymptotically stable. Our method is evaluated through hardware experiments in various scenarios, demonstrating the capabilities of using multirotor aerial vehicles to handle bendable objects.

cs.RO↗

arXiv2026

From Ellipsoids to Midair Control of Dynamic Hitches

The ability to manipulate and interlace cables using aerial vehicles can greatly improve aerial transportation tasks. Such interlacing cables create hitches by winding two or more cables around each other, which can enclose payloads or can further develop into knots. Dynamic modeling and control of such hitches are key to mastering inter-cable interactions in the context of cable-suspended aerial manipulation. This paper introduces an ellipsoid-based kinematic model to connect the geometric nature of a hitch created by two cables and the dynamics of the hitch driven by four aerial vehicles, which reveals the control-affine form of the system. As the constraint for maintaining tension of a cable is also control-affine, we design a quadratic programming-based controller that combines Control Lyapunov and High-Order Control Barrier Functions (CLF-HOCBF-QP) to precisely track a desired hitch position and system shape while enforcing safety constraints like cable tautness. We convert desired geometric reference configurations into target robot positions and introduce a composite error into the Lyapunov function to ensure a relative degree of one to the input. Numerical simulations validate our approach, demonstrating stable, high-speed tracking of dynamic references.

cs.RO↗

arXiv2025

Modular Multi-Rotors: From Quadrotors to Fully-Actuated Aerial Vehicles

Traditional aerial vehicles are constrained to perform specific tasks due to their adhoc designs. Based on modularity, we propose a versatile robot, H-ModQuad, that can adapt to different tasks by increasing its load capacity and actuated degrees of freedom. It is composed of cuboid modules propelled by quadrotors with tilted rotors. We present two families of module designs that bring scalable and versatile actuation to the aerial systems. By configuring multiple modules, H-ModQuad can increase its payload capacity and change its actuated degrees of freedom from 4 to 5 and 6. By modeling the actuation capability of H-ModQuad using actuation ellipsoids and wrench polytopes, we find the body frame of a vehicle that maximizes its thrusting efficiency. We also compare the vehicle capabilities against formally defined task requirements. We present the dynamics of H-ModQuad and integrate control strategies despite the vehicle design. The design and model are validated with experiments using actual robots, showing that H-ModQuad vehicles with different configurations provide different actuation properties.

cs.RO↗

arXiv2025

The Spinning Blimp: Design and Control of a Novel Minimalist Aerial Vehicle Leveraging Rotational Dynamics and Locomotion

This paper presents the Spinning Blimp, a novel lighter-than-air (LTA) aerial vehicle designed for low-energy stable flight. Utilizing an oblate spheroid helium balloon for buoyancy, the vehicle achieves minimal energy consumption while maintaining prolonged airborne states. The unique and low-cost design employs a passively arranged wing coupled with a propeller to induce a spinning behavior, providing inherent pendulum-like stabilization. We propose a control strategy that takes advantage of the continuous revolving nature of the spinning blimp to control translational motion. The cost-effectiveness of the vehicle makes it highly suitable for a variety of applications, such as patrolling, localization, air and turbulence monitoring, and domestic surveillance. Experimental evaluations affirm the design's efficacy and underscore its potential as a versatile and economically viable solution for aerial applications.

cs.RO↗

arXiv2025

MochiSwarm: A testbed for robotic blimps in realistic environments

Testing aerial robots in tasks such as pickup-and-delivery and surveillance significantly benefits from high energy efficiency and scalability of the deployed robotic system. This paper presents MochiSwarm, an open-source testbed of light-weight robotic blimps, ready for multi-robot operation without external localization. We introduce the system design in hardware, software, and perception, which capitalizes on modularity, low cost, and light weight. The hardware allows for rapid modification, which enables the integration of additional sensors to enhance autonomy for different scenarios. The software framework supports different actuation models and communication between the base station and multiple blimps. The detachable perception module allows independent blimps to perform tasks that involve detection and autonomous actuation. We showcase a differential-drive module as an example, of which the autonomy is enabled by visual servoing using the perception module. A case study of pickup-and-delivery tasks with up to 12 blimps highlights the autonomy of the MochiSwarm without external infrastructures.

cs.RO↗

arXiv2023

A Novel Low-Cost, Recyclable, Easy-to-Build Robot Blimp For Transporting Supplies in Hard-to-Reach Locations

Rural communities in remote areas often encounter significant challenges when it comes to accessing emergency healthcare services and essential supplies due to a lack of adequate transportation infrastructure. The situation is further exacerbated by poorly maintained, damaged, or flooded roads, making it arduous for rural residents to obtain the necessary aid in critical situations. Limited budgets and technological constraints pose additional obstacles, hindering the prompt response of local rescue teams during emergencies. The transportation of crucial resources, such as medical supplies and food, plays a vital role in saving lives in these situations. In light of these obstacles, our objective is to improve accessibility and alleviate the suffering of vulnerable populations by automating transportation tasks using low-cost robotic systems. We propose a low-cost, easy-to-build blimp robot (UAVs), that can significantly enhance the efficiency and effectiveness of local emergency responses.

cs.RO↗

arXiv2023

SBlimp: Design, Model, and Translational Motion Control for a Swing-Blimp

We present an aerial vehicle composed of a custom quadrotor with tilted rotors and a helium balloon, called SBlimp. We propose a novel control strategy that takes advantage of the natural stable attitude of the blimp to control translational motion. Different from cascade controllers in the literature that controls attitude to achieve desired translational motion, our approach directly controls the linear velocity regardless of the heading orientation of the vehicle. As a result, the vehicle swings during the translational motion. We provide a planar analysis of the dynamic model, demonstrating stability for our controller. Our design is evaluated in numerical simulations with different physical factors and validated with experiments using a real-world prototype, showing that the SBlimp is able to achieve stable translation regardless of its orientation.

cs.RO↗

arXiv2023

Learning to Navigate in Turbulent Flows with Aerial Robot Swarms: A Cooperative Deep Reinforcement Learning Approach

Aerial operation in turbulent environments is a challenging problem due to the chaotic behavior of the flow. This problem is made even more complex when a team of aerial robots is trying to achieve coordinated motion in turbulent wind conditions. In this paper, we present a novel multi-robot controller to navigate in turbulent flows, decoupling the trajectory-tracking control from the turbulence compensation via a nested control architecture. Unlike previous works, our method does not learn to compensate for the air-flow at a specific time and space. Instead, our method learns to compensate for the flow based on its effect on the team. This is made possible via a deep reinforcement learning approach, implemented via a Graph Convolutional Neural Network (GCNN)-based architecture, which enables robots to achieve better wind compensation by processing the spatial-temporal correlation of wind flows across the team. Our approach scales well to large robot teams -- as each robot only uses information from its nearest neighbors -- , and generalizes well to robot teams larger than seen in training. Simulated experiments demonstrate how information sharing improves turbulence compensation in a team of aerial robots and demonstrate the flexibility of our method over different team configurations.

cs.RO↗

arXiv2023

Finding Optimal Modular Robots for Aerial Tasks

Traditional aerial vehicles have limitations in their capabilities due to actuator constraints, such as motor saturation. The hardware components and their arrangement are designed to satisfy specific requirements and are difficult to modify during operation. To address this problem, we introduce a versatile modular multi-rotor vehicle that can change its capabilities by reconfiguration. Our modular robot consists of homogeneous cuboid modules, propelled by quadrotors with tilted rotors. Depending on the number of modules and their configuration, the robot can expand its actuation capabilities. In this paper, we build a mathematical model for the actuation capability of a modular multi-rotor vehicle and develop methods to determine if a vehicle is capable of satisfying a task requirement. Based on this result, we find the optimal configurations for a given task. Our approach is validated in realistic 3D simulations, showing that our modular system can adapt to tasks with varying requirements.

cs.RO↗

arXiv2023

Toward Fine Contact Interactions: Learning to Control Normal Contact Force with Limited Information

Dexterous manipulation of objects through fine control of physical contacts is essential for many important tasks of daily living. A fundamental ability underlying fine contact control is compliant control, \textit{i.e.}, controlling the contact forces while moving. For robots, the most widely explored approaches heavily depend on models of manipulated objects and expensive sensors to gather contact location and force information needed for real-time control. The models are difficult to obtain, and the sensors are costly, hindering personal robots' adoption in our homes and businesses. This study performs model-free reinforcement learning of a normal contact force controller on a robotic manipulation system built with a low-cost, information-poor tactile sensor. Despite the limited sensing capability, our force controller can be combined with a motion controller to enable fine contact interactions during object manipulation. Promising results are demonstrated in non-prehensile, dexterous manipulation experiments.

cs.RO↗

arXiv2023

Dynamic Crowd Vetting: Collaborative Detection of Malicious Robots in Dynamic Communication Networks

Coordination in a large number of networked robots is a challenging task, especially when robots are constantly moving around the environment and there are malicious attacks within the network. Various approaches in the literature exist for detecting malicious robots, such as message sampling or suspicious behavior analysis. However, these approaches require every robot to sample every other robot in the network, leading to a slow detection process that degrades team performance. This paper introduces a method that significantly decreases the detection time for legitimate robots to identify malicious robots in a scenario where legitimate robots are randomly moving around the environment. Our method leverages the concept of ``Dynamic Crowd Vetting" by utilizing observations from random encounters and trusted neighboring robots' opinions to quickly improve the accuracy of detecting malicious robots. The key intuition is that as long as each legitimate robot accurately estimates the legitimacy of at least some fixed subset of the team, the second-hand information they receive from trusted neighbors is enough to correct any misclassifications and provide accurate trust estimations of the rest of the team. We show that the size of this fixed subset can be characterized as a function of fundamental graph and random walk properties. Furthermore, we formally show that as the number of robots in the team increases the detection time remains constant. We develop a closed form expression for the critical number of time-steps required for our algorithm to successfully identify the true legitimacy of each robot to within a specified failure probability. Our theoretical results are validated through simulations demonstrating significant reductions in detection time when compared to previous works that do not leverage trusted neighbor information.

cs.RO↗

arXiv2023

Forming and Controlling Hitches in Midair Using Aerial Robots

The use of cables for aerial manipulation has shown to be a lightweight and versatile way to interact with objects. However, fastening objects using cables is still a challenge and human is required. In this work, we propose a novel way to secure objects using hitches. The hitch can be formed and morphed in midair using a team of aerial robots with cables. The hitch's shape is modeled as a convex polygon, making it versatile and adaptable to a wide variety of objects. We propose an algorithm to form the hitch systematically. The steps can run in parallel, allowing hitches with a large number of robots to be formed in constant time. We develop a set of actions that include different actions to change the shape of the hitch. We demonstrate our methods using a team of aerial robots via simulation and actual experiments.

cs.RO↗

arXiv2022

Folding Knots Using a Team of Aerial Robots

From ancient times, humans have been using cables and ropes to tie, carry, and manipulate objects by folding knots. However, automating knot folding is challenging because it requires dexterity to move a cable over and under itself. In this paper, we propose a method to fold knots in midair using a team of aerial vehicles. We take advantage of the fact that vehicles are able to fly in between cable segments without any re-grasping. So the team grasps the cable from the floor, and releases it once the knot is folded. Based on a composition of catenary curves, we simplify the complexity of dealing with an infinite-dimensional configuration space of the cable, and formally propose a new knot representation. Such representation allows us to design a trajectory that can be used to fold knots using a leader-follower approach. We show that our method works for different types of knots in simulations. Additionally, we show that our solution is also computationally efficient and can be executed in real-time.

cs.RO↗

arXiv2022

PogoDrone: Design, Model, and Control of a Jumping Quadrotor

We present a design, model, and control for a novel jumping-flying robot that is called PogoDrone. The robot is composed of a quadrotor with a passive mechanism for jumping. The robot can continuously jump in place or fly like a normal quadrotor. Jumping in place allows the robot to quickly move and operate very close to the ground. For instance, in agricultural applications, the jumping mechanism allows the robot to take samples of soil. We propose a hybrid controller that switches from attitude to position control to allow the robot to fall horizontally and recover to the original position. We compare the jumping mode with the hovering mode to analyze the energy consumption. In simulations, we evaluate the effect of different factors on energy consumption. In real experiments, we show that our robot can repeatedly impact the ground, jump, and fly in a physical environment.

cs.RO↗

arXiv2021

Non-Prehensile Manipulation of Cuboid Objects Using a Catenary Robot

Transporting objects using quadrotors with cables has been widely studied in the literature. However, most of those approaches assume that the cables are previously attached to the load by human intervention. In tasks where multiple objects need to be moved, the efficiency of the robotic system is constrained by the requirement of manual labor. Our approach uses a non-stretchable cable connected to two quadrotors, which we call the catenary robot, that fully automates the transportation task. Using the cable, we can roll and drag the cuboid object (box) on planar surfaces. Depending on the surface type, we choose the proper action, dragging for low friction, and rolling for high friction. Therefore, the transportation process does not require any human intervention as we use the cable to interact with the box without requiring fastening. We validate our control design in simulation and with actual robots, where we show them rolling and dragging boxes to track desired trajectories.

cs.RO↗

arXiv2021

H-ModQuad: Modular Multi-Rotors with 4, 5, and 6 Controllable DOF

Traditional aerial vehicles are usually custom-designed for specific tasks. Although they offer an efficient solution, they are not always able to adapt to changes in the task specification, e.g., increasing the payload. This applies to quadrotors, having a maximum payload and only four controllable degrees of freedom, limiting their adaptability to the task's variations. We propose a versatile modular robotic system that can increase its payload and degrees of freedom by assembling heterogeneous modules; we call it H-ModQuad. It consists of cuboid modules propelled by quadrotors with tilted propellers that can generate forces in different directions. By connecting different types of modules, an H-ModQuad can increase its controllable degrees of freedom from 4 to 5 and 6. We model the general structure and propose three controllers, one for each number of controllable degrees of freedom. We extend the concept of the actuation ellipsoid to find the best reference orientation that can maximize the performance of the structure. Our approach is validated with experiments using actual robots, showing the independence of the translation and orientation of a structure.

cs.RO↗