arXiv subjects

David Redka

Publications and source records attributed to David Redka.

9 recordsLinked to original sources

arXiv2026

Probing the transport properties of Cantor-Wu alloys by means of femtosecond and nanosecond laser ablation

Single-pulse laser ablation thresholds of selected equiatomic Cantor-Wu alloys - FeNi, CoNi, CrFeNi, CrCoNi, and CrMnFeCoNi - are measured for femtosecond and nanosecond pulse durations and interpreted through first-principles calculations of the electronic structure, the electron-phonon coupling, and the electronic thermal conductivity. Alloy synthesis, ablation experiments, and theory are performed consistently on the same set of samples. The absorbed femtosecond thresholds decrease systematically by up to 36 % from FeNi to the Cr-containing alloys, a trend that reflectance variations cannot explain. Two-temperature-model scaling of the thresholds with the electronic thermal conductivity and the electron-phonon coupling, with all parameters taken from the spin-disordered phase, reproduces the measured hierarchy. The nanosecond thresholds instead probe the thermal equilibrium conductivity averaged along the heating path. The apparent outlier of CoNi, whose room-temperature transport over-predicts its thresholds by up to a factor of two for both pulse durations, is resolved quantitatively by the collapse of its conductivity upon loss of ferromagnetic order. Single-pulse ablation thresholds thereby emerge as sensitive, contact-free probes of electronic transport and of its magnetic-phase dependence in compositionally complex alloys.

cond-mat.mtrl-sci↗

arXiv2026

Ultrafast Tracking of the Spallation Layer in Bulk Gold, Aluminum, and Steel

Extreme manufacturing with ultrashort-pulse (USP) lasers at the physical limit of precision and efficiency requires understanding ablation dynamics on the picosecond-to-nanosecond timescale. Pump-probe reflectometry (PPR) provides direct access to photomechanical spallation through Newton ring (NR) interference, but this signature vanishes when the spallation layer becomes optically opaque or the ablated material strongly attenuates the probe. Here, we combine PPR with phase-sensitive interferometric pump-probe (PPI) measurements to track the spallation layer in bulk steel, aluminum, and gold. PPI resolves the propagating layer even when the reflected probe signal is suppressed by >95%. Joint PPR/PPI analysis with transfer-matrix modelling (TMM) yields spallation layer thickness, vapor layer absorption, and the layer disintegration times. These quantities are key determinants of the energy coupling of subsequent pulses in GHz burst processing.

physics.optics↗

arXiv2026

First-principles electronic transport properties of Ti and Ti-6Al-4V for modeling ultrashort-pulse laser ablation

Predictive modeling of ultrashort-pulse laser ablation requires temperature-dependent material parameters derived from the electronic structure, namely the electronic thermal conductivity, electron--phonon coupling, and heat capacity. These parameters are well documented for elemental metals but remain sparsely documented for alloys, apart from application-relevant exceptions such as stainless steels. The technologically important titanium alloy Ti-6Al-4V is a prominent example, which is still modeled using elemental-titanium values. We compute the electronic transport of hcp Ti and Ti-6Al-4V from first principles, using the Kubo--Greenwood formalism within the Korringa--Kohn--Rostoker coherent-potential-approximation framework, treating chemical and thermal disorder on equal footing. For elemental Ti, the calculated electrical resistivity agrees with independent \textsc{abinit} electron--phonon calculations and experiment, and also reproduces the high-temperature saturation near the Mott--Ioffe--Regel limit. Under electron--phonon nonequilibrium, the electronic thermal conductivity saturates and then decreases with electronic temperature, reaching a maximum of about \SI{2.97}{\kilo\watt\per\metre\per\kelvin} in Ti but only \SI{0.47}{\kilo\watt\per\metre\per\kelvin} in Ti-6Al-4V, a factor of 6.4 lower. In two-temperature-model simulations the alloy and elemental parameter sets yield peak lattice temperatures differing by only about 1.4\%, consistent with reported experimental ablation thresholds that differ by about 3\%, well within their measurement uncertainties. Replacing the first-principles thermal conductivity with the low-temperature Drude limit shifts the peak lattice temperature by up to 19\%, showing that the functional form of the transport model is even more important than the elemental vs alloy distinction for predictive accuracy.

cond-mat.mtrl-sci↗

arXiv2026

Breakdown of spallation in multi-pulse ultrafast laser ablation

Ultrashort-pulse laser ablation of metals near damage threshold is governed by homogeneous spallation, in which tensile unloading releases a nanometre-thin liquid film whose optical signatures are temporally evolving concentric Newton rings in pump--probe experiments. This well-established picture rests almost exclusively on single-pulse results obtained on ideally flat surfaces, yet application-oriented processing invariably operates in a multi-pulse regime in which each pulse irradiates a surface progressively modified by preceding pulses. Whether homogeneous spallation persists under these conditions has remained an open question. Here we resolve this question using time-resolved pump-probe interferometry applied pulse by pulse to austenitic stainless steel. We show that homogeneous spallation dominates the first pulse, while its contribution is strongly reduced for the second pulse. By the third pulse, Newton rings vanish and sustained surface bulging collapses, with the optical transients fully saturating into a phase-explosion-like signature by the fourth pulse. Fourier-domain coherence analysis rules out roughness-induced decoherence as an optical artefact. Four independent observables, spanning time-resolved and final-state measurements, converge on the same transition after three to four pulses. Spallation-layer formation, widely invoked to explain ultrashort-pulse ablation of metals, is thus a single-pulse phenomenon rather than a multi-pulse ablation mechanism.

physics.optics↗

arXiv2026

Microstructural Evolution and Crystallization Behavior of Amorphous Medium-Entropy Ti-Nb-Zr-Ag Thin Films

Improving the performance of metallic implants increasingly relies on the development of multifunctional surface modifications that combine structural stability, bioactivity, and prevention of bacterial colonization. Medium-entropy alloys (MEAs) represent a promising approach for such coatings, as their chemical complexity allows the formation of structurally stable matrices with tunable properties. In this study, Ti-Nb-Zr and Ti-Nb-Zr-Ag thin films were deposited by magnetron sputtering and subjected to annealing at temperatures of up to 1100 $^{\circ}$C to evaluate the influence of Ag, added for its antibacterial potential, on structural evolution. The as-deposited Ag-free film was fully amorphous, whereas the Ag-containing film exhibited a predominantly amorphous matrix with finely dispersed crystalline nanoparticles, indicating that Ag promoted early-stage crystallization. Both films displayed a fine columnar morphology (column diameter $\sim$15 nm) with dome-like protrusions, a hierarchical surface structure favorable for protein adhesion. Upon annealing, the Ag-free film recrystallized into a granular, loosely packed morphology, while the Ag-containing film retained a compact structure, demonstrating the stabilizing role of Ag. These findings underscore the potential of Ag-containing amorphous MEAs for forming multifunctional coatings with enhanced thermal stability, antibacterial functionality, and biointerface-relevant surface features for advanced biomedical applications.

cond-mat.mtrl-sci↗

arXiv2026

Electronic structure, phase stability, and transport properties of the AlTiVCr lightweight high-entropy alloy: A computational study

We investigate the thermodynamics and phase stability of the AlTiVCr lightweight high-entropy alloy using a combination of ab initio electronic structure calculations, a concentration wave analysis, and atomistic Monte Carlo simulations. In alignment both with experimental data and with results obtained using other computational approaches, we predict a $\textrm{B2}$ (CsCl) chemical ordering emerging in this alloy at comparatively high temperatures, which is driven by Al and Ti moving to separate sublattices, while V and Cr express weaker site preferences. The impact of this $\textrm{B2}$ chemical ordering on the electronic transport properties of the alloy is investigated within a Kubo-Greenwood linear response framework and it is found that, counter-intuitively, the alloy's residual resistivity increases as the material transitions from the $\textrm{A2}$ (disordered bcc) phase to our predicted $\textrm{B2}$ (partially) ordered structure. This is understood to result primarily from a reduction in the density of electronic states at the Fermi level induced by the chemical ordering. At low temperatures, our atomistic Monte Carlo simulations then reveal subsequent sublattice orderings, with the ground-state configuration predicted to be a fully-ordered, single-phase structure with vanishing associated residual resistivity. These results give fresh, insight into the atomic-scale structure and consequent physical properties of this well-studied, technologically relevant material.

cond-mat.mtrl-sci↗

arXiv2025

Microparticle laser fragmentation in liquids: mechanisms, energetics, and efficiency quantified with single-pulse, single-particle precision

Microparticle laser fragmentation in liquids has emerged as a promising approach to generate nanoparticles with high efficiency. Despite its advantages, the underlying fragmentation mechanisms, their connection to the nanoparticle size distribution, and the energy efficiency of the process remain poorly understood. In this study for the first time, microparticle fragmentation is investigated in single-pulse, single-particle experiments on Au microparticles. Determining the absorbed peak fluence enables assessment of the process energetics. Pump-probe microscopy identifies photomechanical fracture of the molten microparticle volume and photothermal phase explosion of its superheated surface as the fragmentation mechanisms. We find that 83% of the absorbed laser energy is converted into cavitation bubble formation, while only 1% contributes to the surface energy of the generated nanoparticles. Despite this small fraction, MP-LFL outperforms laser ablation in liquids. The surface energy generated per absorbed energy is 10 times higher, and the overall energy efficiency is 14 times higher. This gain originates from the confined microparticle geometry, which minimizes energy losses and enhances photomechanical fragmentation via pressure focusing. These results position microparticle fragmentation in liquids as a fundamentally more energy-efficient approach for scalable, laser-based nanoparticle production than laser ablation in liquids.

physics.optics↗

arXiv2025

From surface roughness to crater formation in a 2D multi-scale simulation of ultrashort pulse laser ablation

Surface roughness plays a critical role in ultrashort pulse laser ablation, particularly for industrial applications using burst mode operations, multi-pulse laser processing, and the generation of laser-induced periodic surface structures. Hence, we address the impact of surface roughness on the resulting laser ablation topography predicted by a simulation model and compared to experimental results. We present a comprehensive multi-scale simulation framework that first employs finite-difference-time-domain simulations for calculating the surface fluence distribution on a rough surface measured by an atomic-force-microscope followed by the two-temperature model coupled with hydrodynamic/solid mechanics simulation for the initial material heating. Lastly, a computational fluid dynamics model for material relaxation and fluid flow is developed and employed. Final state results of aluminum and AISI 304 stainless steel simulations demonstrated alignment with established ablation models and crater dimension prediction. Notably, Al exhibited significant optical scattering effects due to initial surface roughness of 15 nm - being 70 times below the laser wavelength, leading to localized, selective ablation processes and substantially altered crater topography compared to idealized conditions. Contrary, AISI 304 with RMS roughness of 2 nm showed no difference. Hence, we highlight the necessity of incorporating realistic, material-specific surface roughness values into large-scale ablation simulations. Furthermore, the induced local fluence variations demonstrated the inadequacy of neglecting lateral heat transport effects in this context.

hep-ex↗

arXiv2025

Emergent B2 chemical orderings in the AlTiVNb and AlTiCrMo refractory high-entropy superalloys studied via first-principles theory and atomistic modelling

We study the thermodynamics and phase stability of the AlTiVNb and AlTiCrMo refractory high-entropy superalloys using a combination of \textit{ab initio} electronic structure theory -- namely a concentration wave analysis -- and atomistic Monte Carlo simulations. Our multiscale approach is suitable both for examining atomic short-range order in the solid solution, as well as for studying the emergence of long-range crystallographic order with decreasing temperature. In both alloys considered in this work, in alignment with experimental observations, we predict a B2 (CsCl) chemical ordering emerging at high temperatures, which is driven primarily by Al and Ti, with other elements expressing weaker site preferences. The predicted B2 ordering temperature for AlTiVNb is higher than that for AlTiCrMo. These chemical orderings are discussed in terms of the alloys' electronic structure, with hybridisation between the $sp$ states of Al and the $d$ states of the transition metals understood to play an important role. Within our modelling, the chemically ordered B2 phases for both alloys have an increased predicted residual resistivity compared to the A2 (disordered bcc) phases. These increased resistivity values are understood to originate in a reduction in the electronic density of states at the Fermi level, in conjunction with qualitative changes to the alloys' smeared-out Fermi surfaces. These results highlight the close connections between composition, structure, and physical properties in this technologically relevant class of materials.

cond-mat.mtrl-sci↗