arXiv subjects

David López-Pérez

Publications and source records attributed to David López-Pérez.

At least 19 recordsLinked to original sources

arXiv2026

Passive AoA Estimation of COTS 5G NR Handsets from Uplink SRS: A Practical USRP-B210 Implementation

This paper presents a passive network-side framework for estimating the uplink angle of arrival (AoA) of unmodified commercial 5G handsets from native Sounding Reference Signal (SRS) transmissions. The proposed system operates on an srsRAN Project gNB and estimates AoA directly from the per-antenna SRS channel estimates using a calibrated two-element Universal Software Radio Peripheral (USRP) B210 receiver and a MUSIC-based estimator, requiring neither protocol modifications nor user-equipment cooperation. Independent SRS channel estimates enable simultaneous AoA estimation for up to four commercial handsets. The framework is evaluated through indoor and outdoor measurement campaigns. Indoor measurements on bands n40 and n78 achieve a root-mean-square error of 1.5 on n40 over a 30 broadside sector. Outdoor experiments in a live 5G standalone deployment demonstrate simultaneous multi-user operation and show that estimation accuracy is primarily governed by propagation conditions and received signalto-interference-plus-noise ratio (SINR) rather than transmitter distance. These results demonstrate the feasibility of passive uplink AoA estimation using native 5G signaling, low-cost SDR hardware, and commercial handsets.

eess.SP↗

arXiv2026

Indirect Estimation of SINR via SSB and CSI-RS RSRP in 5G NR

Predicting user equipment (UE) performance is essential for proactive network control, resource management, and digital twin sandboxes. However, the inherent flexibility and complexity of beam-based 5G new radio (NR) networks make accurate performance forecasting highly challenging. This paper proposes a data-driven approach to predict the average downlink signal-to-interference-plus-noise ratio (SINR) relying exclusively on standardized reference-signal measurements, namely synchronization signal block (SSB) and channel state information-reference signal (CSI-RS) reference signal received power (RSRP). We formulate this prediction as a supervised learning problem and evaluate various input feature representations using a third generation partnership project (3GPP)-compliant synthetic dataset. Our analysis reveals that filtering measurements based on active CSI-RS beams significantly enhances prediction accuracy while reducing input dimensionality. This activity-aware strategy demonstrates the strong viability of machine learning models for proactive network optimization.

cs.NI↗

arXiv2026

HAPS as a Hypercell: Enabling Coverage and Capacity Carrier Shutdown in Cellular Networks

Energy consumption remains a dominant operational challenge for current and future cellular systems, especially in dense urban deployments. This paper investigates a novel role for non terrestrial network (NTN) high-altitude platform station (HAPS) as an enabler of energy-efficient operation rather than only coverage extension. We define the HAPS-Hypercell as a wide-area non-terrestrial layer that can assume the coverage role of multiple terrestrial macro-cells, enabling, for the first time, the shutdown of both capacity and coverage macro-cells. We develop a comprehensive third generation partnership project (3GPP)-compliant system model, along with two HAPS-Hypercell pairing architectures that capture the interplay among multiple layers, realistic channel conditions, and distributed carrier shutdown (CS) mechanisms. Our results show that the HAPS-Hypercell can effectively reduce overall network power consumption. We then identify key limitations of a straightforward HAPS integration, laying the groundwork for future optimization and providing key insights for next-generation CS operations.

cs.IT↗

arXiv2026

A Tutorial on IEEE 802.11bn Multi-AP Coordination for Wi-Fi 8: From Standardization to Performance Evaluation

The IEEE 802.11bn amendment defines significant modifications to the standard by establishing Ultra High Reliability (UHR) targets in Wireless Local Area Networks (WLANs). This is expected to deliver substantial enhancements over previous standards, including modes of operation that increase throughput, reduce the 95th percentile of the latency distribution, and decrease MAC Protocol Data Unit (MPDU) loss (all by at least 25%) compared to Extremely High Throughput (EHT) operations defined in the 802.11be amendment. A fundamental innovation for achieving these ambitious goals is the introduction of Multi-Access Point Coordination (MAPC), an unprecedented feature whereby APs will be able to coordinate among themselves to enhance spectrum utilization and advance towards reliability. This paper provides a comprehensive overview and analysis of this key framework. We begin by reviewing existing AP coordination solutions that precede the 802.11bn standard, which serve as a foundation for understanding the transition to the current framework. We then describe the technical 802.11bn MAPC framework as defined by the task group. A detailed overview of each candidate MAPC feature is provided, contextualized with the relevant state-of-the-art. Furthermore, we introduce Kom8ndor, an open-source Wi-Fi 8 simulation tool, to evaluate these candidate MAPC features and showcase their potential to achieve UHR goals. Finally, we outline the future of MAPC beyond 802.11bn, exploring promising directions such as coordination schemes beyond 802.11bn (e.g., Joint Transmission (JT)) and new ideas.

cs.NI↗

arXiv2026

PPO-Based Dynamic Positioning of HAPS-BS in Wind-Disturbed Stratospheric Maritime Networks

High-Altitude Platform Stations (HAPS) offer a promising solution for wide-area wireless coverage in maritime regions lacking terrestrial infrastructure. However, maintaining reliable performance is challenging due to dynamic ship mobility and atmospheric disturbances, particularly stratospheric wind effects on HAPS positioning. This paper proposes a deep reinforcement learning (DRL)-based framework for dynamic positioning of wind-disturbed HAPS-mounted base stations in maritime networks. A centralized DRL agent deployed on a coordinator HAPS controls multiple serving HAPS using radio measurements and network feedback, capturing realistic channel conditions and user mobility. A Proximal Policy Optimization (PPO) algorithm is employed to learn robust positioning policies that enhance coverage stability and system throughput under wind disturbances. Simulation results show that the proposed approach effectively mitigates wind-induced positioning deviations while ensuring reliable wide-area connectivity for maritime users.

eess.SP↗

arXiv2026

Capacity and Energy Trade-Offs in FR3 6G Networks Using Real Deployment Data

This article presents a data-driven system-level analysis of multi-layer 6G networks operating in the upper mid-band (FR3: 7-24 GHz). Unlike most prior studies based on 3rd Generation Partnership Project (3GPP) templates, we leverage real-world deployment and traffic data from a commercial 4G/5G network in China to evaluate practical 6G strategies. Using Giulia-a deployment-informed system-level heterogeneous network model-we show that 6G can boost median throughput by up to 9.5x over heterogeneous 4G+5G deployments, but also increases power usage by up to 59%. Critically, co-locating 6G with existing sites delivers limited gains while incurring high energy cost. In contrast, non-co-located, traffic-aware deployments achieve superior throughput-to-watt efficiency, highlighting the need for strategic, user equipment (UE) hotspot-focused 6G planning.

cs.NI↗

arXiv2025

Data-Driven Cellular Mobility Management via Bayesian Optimization and Reinforcement Learning

Mobility management in cellular networks faces increasing complexity due to network densification and heterogeneous user mobility characteristics. Traditional handover (HO) mechanisms, which rely on predefined parameters such as A3-offset and time-to-trigger (TTT), often fail to optimize mobility performance across varying speeds and deployment conditions. Fixed A3-offset and TTT configurations either delay HOs, increasing radio link failures (RLFs), or accelerate them, leading to excessive ping-pong effects. To address these challenges, we propose two data-driven mobility management approaches leveraging high-dimensional Bayesian optimization (HD-BO) and deep reinforcement learning (DRL). HD-BO optimizes HO parameters such as A3-offset and TTT, striking a desired trade-off between ping-pongs vs. RLF. DRL provides a non-parameter-based approach, allowing an agent to select serving cells based on real-time network conditions. We validate our approach using a real-world cellular deployment scenario, and employing Sionna ray tracing for site-specific channel propagation modeling. Results show that both HD-BO and DRL outperform 3GPP set-1 (TTT of 480 ms and A3-offset of 3 dB) and set-5 (TTT of 40 ms and A3-offset of -1 dB) benchmarks. We augment HD-BO with transfer learning so it can generalize across a range of user speeds. Applying the same transfer-learning strategy to the DRL method reduces its training time by a factor of 2.5 while preserving optimal HO performance, showing that it adapts efficiently to the mobility of aerial users such as UAVs. Simulations further reveal that HD-BO remains more sample-efficient than DRL, making it more suitable for scenarios with limited training data.

cs.IT↗

arXiv2025

Efficient Malicious UAV Detection Using Autoencoder-TSMamba Integration

Malicious Unmanned Aerial Vehicles (UAVs) present a significant threat to next-generation networks (NGNs), posing risks such as unauthorized surveillance, data theft, and the delivery of hazardous materials. This paper proposes an integrated (AE)-classifier system to detect malicious UAVs. The proposed AE, based on a 4-layer Tri-orientated Spatial Mamba (TSMamba) architecture, effectively captures complex spatial relationships crucial for identifying malicious UAV activities. The first phase involves generating residual values through the AE, which are subsequently processed by a ResNet-based classifier. This classifier leverages the residual values to achieve lower complexity and higher accuracy. Our experiments demonstrate significant improvements in both binary and multi-class classification scenarios, achieving up to 99.8 % recall compared to 96.7 % in the benchmark. Additionally, our method reduces computational complexity, making it more suitable for large-scale deployment. These results highlight the robustness and scalability of our approach, offering an effective solution for malicious UAV detection in NGN environments.

cs.CV↗

arXiv2025

Cellular Network Design for UAV Corridors via Data-driven High-dimensional Bayesian Optimization

We address the challenge of designing cellular networks for uncrewed aerial vehicles (UAVs) corridors through a novel data-driven approach. We assess multiple state-of-the-art high-dimensional Bayesian optimization (HD-BO) techniques to jointly optimize the cell antenna tilts and half-power beamwidth (HPBW). We find that some of these approaches achieve over 20dB gains in median SINR along UAV corridors, with negligible degradation to ground user performance. Furthermore, we explore the HD-BO's capabilities in terms of model generalization via transfer learning, where data from a previously observed scenario source is leveraged to predict the optimal solution for a new scenario target. We provide examples of scenarios where such transfer learning is successful and others where it fails. Moreover, we demonstrate that HD-BO enables multi-objective optimization, identifying optimal design trade-offs between data rates on the ground versus UAV coverage reliability. We observe that aiming to provide UAV coverage across the entire sky can lower the rates for ground users compared to setups specifically optimized for UAV corridors. Finally, we validate our approach through a case study in a real-world cellular network, where HD-BO identifies optimal and non-obvious antenna configurations that result in more than double the rates along 3D UAV corridors with negligible ground performance loss.

cs.IT↗

arXiv2025

Data-Driven Design of 3GPP Handover Parameters with Bayesian Optimization and Transfer Learning

Mobility management in dense cellular networks is challenging due to varying user speeds and deployment conditions. Traditional 3GPP handover (HO) schemes, relying on fixed A3-offset and time-to-trigger (TTT) parameters, struggle to balance radio link failures (RLFs) and ping-pongs. We propose a data-driven HO optimization framework based on high-dimensional Bayesian optimization (HD-BO) and enhanced with transfer learning to reduce training time and improve generalization across different user speeds. Evaluations on a real-world deployment show that HD-BO outperforms 3GPP set-1 and set-5 benchmarks, while transfer learning enables rapid adaptation without loss in performance. This highlights the potential of data-driven, site-specific mobility management in large-scale networks.

cs.IT↗

arXiv2025

Data-driven Optimization and Transfer Learning for Cellular Network Antenna Configurations

We propose a data-driven approach for large-scale cellular network optimization, using a production cellular network in London as a case study and employing Sionna ray tracing for site-specific channel propagation modeling. We optimize base station antenna tilts and half-power beamwidths, resulting in more than double the 10\%-worst user rates compared to a 3GPP baseline. In scenarios involving aerial users, we identify configurations that increase their median rates fivefold without compromising ground user performance. We further demonstrate the efficacy of model generalization through transfer learning, leveraging available data from a scenario source to predict the optimal solution for a scenario target within a similar number of iterations, without requiring a new initial dataset, and with a negligible performance loss.

cs.IT↗

arXiv2025

Optimizing Integrated Terrestrial and Non-Terrestrial Networks Performance with Traffic-Aware Resource Management

To address an ever-increasing demand for ubiquitous high-speed connectivity, mobile network deployments are becoming increasingly dense. However, this densification has also led to a surge in overall energy consumption, making the process increasingly challenging. In recent years, non-terrestrial networks (NTNs) have been mainly endorsed as a potential solution to enhance coverage by complementing the coverage of the terrestrial network (TN) in areas with limited network deployment. However, their ability to reduce TN energy consumption, though often overlooked, remains a significant advantage. To this end, this paper introduces a novel radio resource management algorithm, BLASTER (Bandwidth SpLit, User ASsociation, and PowEr ContRol), which integrates bandwidth allocation, user equipment (UE) association, power control, and base station activation within an integrated terrestrial and non-terrestrial network (TN-NTN). This algorithm aims to optimize network resource allocation fairness and energy consumption dynamically, demonstrating new opportunities in deploying satellite networks in legacy cellular systems. Our study offers a comprehensive analysis of the integrated network model, emphasizing the effective balance between energy saving and Quality of Service (QoS), and proposing practical solutions to meet the fluctuating traffic demands of cellular networks.

cs.NI↗

arXiv2024

Capacity and Power Consumption of Multi-Layer 6G Networks Using the Upper Mid-Band

This paper presents a new system model to evaluate the capacity and power consumption of multi-layer 6G networks utilising the upper mid-band (FR3). The model captures heterogeneous 4G, 5G, and 6G deployments, analyzing their performance under different deployment strategies. Our results show that strategic 6G deployments, non-co-located with existing 5G sites, significantly enhance throughput, with median and peak user rates of 300 Mbps and exceeding 1 Gbps, respectively. We also emphasize the importance of priority-based cell reselection and beam configuration to fully leverage 6G capabilities. While 6G implementation increases power consumption by 33%, non-colocated deployments strike a balance between performance and power consumption.

cs.NI↗

arXiv2024

Data-driven Energy Efficiency Modelling in Large-scale Networks: An Expert Knowledge and ML-based Approach

The energy consumption of mobile networks poses a critical challenge. Mitigating this concern necessitates the deployment and optimization of network energy-saving solutions, such as carrier shutdown, to dynamically manage network resources. Traditional optimization approaches encounter complexity due to factors like the large number of cells, stochastic traffic, channel variations, and intricate trade-offs. This paper introduces the simulated reality of communication networks (SRCON) framework, a novel, data-driven modeling paradigm that harnesses live network data and employs a blend of machine learning (ML)- and expert-based models. These mix of models accurately characterizes the functioning of network components, and predicts network energy efficiency and user equipment (UE) quality of service for any energy carrier shutdown configuration in a specific network. Distinguishing itself from existing methods, SRCON eliminates the reliance on expensive expert knowledge, drive testing, or incomplete maps for predicting network performance. This paper details the pipeline employed by SRCON to decompose the large network energy efficiency modeling problem into ML and expert-based submodels. It demonstrates how, by embracing stochasticity, and carefully crafting the relationship between such submodels, the overall computational complexity can be reduced and prediction accuracy enhanced. Results derived from real network data underscore the paradigm shift introduced by SRCON, showcasing significant gains over a state-of-the art method used by a operator for network energy efficiency modeling. The reliability of this local, data-driven modeling of the network proves to be a key asset for network energy-saving optimization.

eess.SY↗

arXiv2024

Federated Learning: A Cutting-Edge Survey of the Latest Advancements and Applications

Robust machine learning (ML) models can be developed by leveraging large volumes of data and distributing the computational tasks across numerous devices or servers. Federated learning (FL) is a technique in the realm of ML that facilitates this goal by utilizing cloud infrastructure to enable collaborative model training among a network of decentralized devices. Beyond distributing the computational load, FL targets the resolution of privacy issues and the reduction of communication costs simultaneously. To protect user privacy, FL requires users to send model updates rather than transmitting large quantities of raw and potentially confidential data. Specifically, individuals train ML models locally using their own data and then upload the results in the form of weights and gradients to the cloud for aggregation into the global model. This strategy is also advantageous in environments with limited bandwidth or high communication costs, as it prevents the transmission of large data volumes. With the increasing volume of data and rising privacy concerns, alongside the emergence of large-scale ML models like Large Language Models (LLMs), FL presents itself as a timely and relevant solution. It is therefore essential to review current FL algorithms to guide future research that meets the rapidly evolving ML demands. This survey provides a comprehensive analysis and comparison of the most recent FL algorithms, evaluating them on various fronts including mathematical frameworks, privacy protection, resource allocation, and applications. Beyond summarizing existing FL methods, this survey identifies potential gaps, open areas, and future challenges based on the performance reports and algorithms used in recent studies. This survey enables researchers to readily identify existing limitations in the FL field for further exploration.

cs.LG↗

arXiv2024

On the Role of Non-Terrestrial Networks for Boosting Terrestrial Network Performance in Dynamic Traffic Scenarios

Due to an ever-expansive network deployment, numerous questions are being raised regarding the energy consumption of the mobile network. Recently, Non-Terrestrial Networks (NTNs) have proven to be a useful, and complementary solution to Terrestrial Networks (TN) to provide ubiquitous coverage. In this paper, we consider an integrated TN-NTN, and study how to maximize its resource usage in a dynamic traffic scenario. We introduce BLASTER, a framework designed to control User Equipment (UE) association, Base Station (BS) transmit power and activation, and bandwidth allocation between the terrestrial and non-terrestrial tiers. Our proposal is able to adapt to fluctuating daily traffic, focusing on reducing power consumption throughout the network during low traffic and distributing the load otherwise. Simulation results show an average daily decrease of total power consumption by 45% compared to a network model following 3GPP recommendation, as well as an average throughput increase of roughly 250%. Our paper underlines the central and dynamic role that the NTN plays in improving key areas of concern for network flexibility.

cs.NI↗

arXiv2023

Throughput and Coverage Trade-Off in Integrated Terrestrial and Non-Terrestrial Networks: an Optimization Framework

In past years, non-terrestrial networks (NTNs) have emerged as a viable solution for providing ubiquitous connectivity for future wireless networks due to their ability to reach large geographical areas. However, the efficient integration and operation of an NTN with a classic terrestrial network (TN) is challenging due the large amount of parameters to tune. In this paper, we consider the downlink scenario of an integrated TN-NTN transmitting over the S band, comprised of low-earth orbit (LEO) satellites overlapping a large-scale ground cellular network. We propose a new resource management framework to optimize the user equipment (UE) performance by properly controlling the spectrum allocation, the UE association and the transmit power of ground base stations (BSs) and satellites. Our study reveals that, in rural scenarios, NTNs, combined with the proposed radio resource management framework, reduce the number of UEs that are out of coverage, highlighting the important role of NTNs in providing ubiquitous connectivity, and greatly improve the overall capacity of the network. Specifically, our solution leads to more than 200% gain in terms of mean data rate with respect to a network without satellites and a standard integrated TN-NTN when the resource allocation setting follows 3GPP recommendation.

cs.NI↗

arXiv2023

Rethinking Dense Cells for Integrated Sensing and Communications: A Stochastic Geometric View

The inclusion of the sensing functionality in the coming generations of cellular networks necessitates a rethink of dense cell deployments. In this paper, we analyze and optimize dense cell topologies for dual-functional radar-communication (DFRC) cellular networks. With the aid of tools from stochastic geometry, we derive new analytical expressions of the potential area spectral efficiencies in (bit/sec/m2) of radar and communication systems. Based on the new formulations of the potential area spectral efficiencies, the energy efficiency (bit/Joule) of DFRC systems is provided in a closed-form formula. Then, an optimization problem to obtain the optimal base station (BS) density that maximizes the network-level energy efficiency is formulated and investigated. In this regard, the mathematical expression of the energy efficiency is shown to be a uni-modal and pseudo-concave function in the density of the BSs. Therefore, the optimal density of the BSs that maximizes the energy efficiency can be obtained. Our analytical and numerical results demonstrate that the inclusion of the sensing functionality clearly differentiates the optimal BS topologies for the DFRC systems against classical communication-only systems.

cs.IT↗