arXiv Science⌕ Search

arXiv subjects

David Henry

Publications and source records attributed to David Henry.

At least 19 recordsLinked to original sources
arXiv2026

Flow kinematics for equatorial coupled surface and internal waves

We study the propagation of coupled surface and internal equatorial internal waves. A model of two vertically stratified fluid layers with different constant densities is employed. Taking Coriolis forces into account, we derive explicit solutions to the linearized governing equations which assumes irrotational fluid motion in both layers separately, and further obtain the dispersion relation which determines the phase speeds of propagating surface and internal waves. We prove a result on solutions to the dispersion relations which greatly simplifies our subsequent analysis of the nonlinear dynamical systems which describe the motion of the fluid in the upper layer. Phase portraits for all possible streamlines in both fluid layers are presented, while furthermore a Lagrangian description of the fluid flow is obtained, and the particle trajectories of the fluid particles are determined.

math.AP↗
arXiv2026

Rotational flow underlying coupled surface and internal waves. I: Eulerian perspective

In this paper we examine the flow generated by coupled surface and internal small-amplitude water waves in a two-fluid layer model, where we take the upper layer to be rotational (constant vorticity) and the lower layer to be irrotational. The presence of vorticity greatly complicates the underlying analysis, yet it generates a rich array of otherwise unobservable phenomena such as the presence of critical layers, and stagnation points, in the fluid interior. We employ a phase-plane analysis to elucidate the qualitative behaviour of streamlines for a range of different coupled-wave, and vorticity, regimes. Although the water waves considered are linear in the fluid dynamics sense, the dynamical systems which govern their motion are nonlinear.

physics.flu-dyn↗
arXiv2025

High-contrast spectroscopy with the new VLT/ERIS instrument: Molecular maps and radial velocity of the gas giant AF Lep b

The Enhanced Resolution Imager and Spectrograph (ERIS) is the new Adaptive-Optics (AO) assisted Infrared instrument at the Very Large Telescope (VLT). Its refurbished Integral Field Spectrograph (IFS) SPIFFIER leverages a new AO module, enabling high-contrast imaging applications and giving access to the orbital and atmospheric characterisation of super-Jovian exoplanets. We test the detection limits of ERIS and demonstrate its scientific potential by exploring the atmospheric composition of the young super-Jovian AF Lep b and improving its orbital solution by measuring its radial velocity relative to its host star. We present new spectroscopic observations of AF Lep b in $K$-band at $R\sim 11000$ obtained with ERIS/SPIFFIER at the VLT. We reduce the data using the standard pipeline together with a custom wavelength calibration routine, and remove the stellar PSF using principal component analysis along the spectral axis. We compute molecular maps by cross-correlating the residuals with molecular spectral templates and measure the radial velocity of the planet relative to the star. Furthermore, we compute contrast grids for molecular mapping by injecting fake planets. We detect a strong signal from H$_{2}$O and CO but not from CH$_{4}$ or CO$_{2}$. This result corroborates the hypothesis of chemical disequilibrium in the atmosphere of AF Lep b. Our measurement of the RV of the planet yields $\Delta v_{\mathrm{R,P\star}} = 7.8 \pm 1.7$ km s$^{-1}$. This enables us to disentangle the degeneracy of the orbital solution, namely the correct longitude of the ascending node is $\Omega=248^{+0.4}_{-0.7}$ deg and the argument of periapsis is $\omega=109^{+13}_{-21}$ deg. Our results demonstrate the competitiveness of the new ERIS/SPIFFIER instrument for the orbital and atmospheric characterisation of exoplanets at high contrast and small angular separation.

astro-ph.EP↗
arXiv2024

Higher-order integrable models for oceanic internal wave-current interactions

In this paper we derive a higher-order KdV equation (HKdV) as a model to describe the unidirectional propagation of waves on an internal interface separating two fluid layers of varying densities. Our model incorporates underlying currents by permitting a sheared current in both fluid layers, and also accommodates the effect of the Earth's rotation by including Coriolis forces (restricted to the Equatorial region). The resulting governing equations describing the water wave problem in two fluid layers under a `flat surface' assumption are expressed in a general form as a system of two coupled equations through Dirichlet-Neumann (DN) operators. The DN operators also facilitate a convenient Hamiltonian formulation of the problem. We then derive the HKdV equation from this Hamiltonian formulation, in the long-wave, and small-amplitude, asymptotic regimes. Finally, it is demonstrated that there is an explicit transformation connecting the HKdV we derive with the following integrable equations of similar type: KdV5, Kaup-Kuperschmidt equation, Sawada-Kotera equation, Camassa-Holm and Degasperis-Procesi equations.

nlin.SI↗
arXiv2024

Characterisation of the Intel RealSense D415 Stereo Depth Camera for Motion-Corrected CT Perfusion Imaging

Even for short protocols (<1 min), head movement can compromise accurate haemodynamic modelling of cerebral CT perfusion (CTP) imaging in acute stroke. Frame-to-frame registration is the most common form of retrospective correction but neglects the fact that motion is continuous, not discrete. By contrast, external tracking devices provide continuous motion monitoring and thereby the opportunity to fully correct the acquired data for motion. The aim of this study was to characterise the Intel D415 stereo depth camera, a compact low-cost markerless tracking device, in terms of its suitability for retrospective CTP motion correction. The results showed that jitter was stable, and thermally-induced pose drift was {\le} 1.5 mm and {\le} 0.5{\deg} during the first 10-20 min, after which it also became stable. For static poses, the mean difference between the Intel D415 motion estimates and ground-truth poses for a head phantom was {\le} 1.24 \pm 0.01 mm and {\le} 0.68 \pm 0.01{\deg} for position and orientation, respectively. For dynamic poses measured while a head phantom travelled smooth continuous trajectories with median speed 0.031 ms^(-1) (speed range 0-0.500 ms^(-1)), the root-mean-square-error (RMSE) was {\le} 1.40 \pm 0.12 mm and {\le} 0.24 \pm 0.02{\deg}. When tracking a simulated patient head trajectory derived from a clinical CTP scan, the average RMSE was {\le} 0.86 \pm 0.03 mm and {\le} 0.16 \pm 0.03{\deg}. Tracking the head motion of a human volunteer inside a clinical CT scanner, the average RMSE was {\le} 2.72 \pm 0.24 mm and {\le} 0.55 \pm 0.07{\deg}. Overall, our results suggest that a single D415 tracking system can achieve promising pose estimation accuracy, though still worse than typical brain CT resolution, including CTP. The error is likely to be reduced to a practical level by combining multiple devices and this should be investigated in future work.

physics.med-ph↗
arXiv2023

Recovery of steady rotational wave profiles from pressure measurements at the bed

We derive equations relating the pressure at a flat seabed and the free-surface profile for steady gravity waves with constant vorticity. The resulting set of nonlinear equations enables the recovery of the free surface from pressure measurements at the bed. Furthermore, the flow vorticity is determined solely from the bottom pressure as part of the recovery method. This approach is applicable even in the presence of stagnation points and its efficiency is illustrated via numerical examples.

physics.flu-dyn↗
arXiv2018

ERIS: revitalising an adaptive optics instrument for the VLT

ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.

astro-ph.IM↗
arXiv2018

Curved detectors developments and characterization: application to astronomical instruments

Many astronomical optical systems have the disadvantage of generating curved focal planes requiring flattening optical elements to project the corrected image on flat detectors. The use of these designs in combination with a classical flat sensor implies an overall degradation of throughput and system performances to obtain the proper corrected image. With the recent development of curved sensor this can be avoided. This new technology has been gathering more and more attention from a very broad community, as the potential applications are multiple: from low-cost commercial to high impact scientific systems, to mass-market and on board cameras, defense and security, and astronomical community. We describe here the first concave curved CMOS detector developed within a collaboration between CNRS- LAM and CEA-LETI. This fully-functional detector 20 Mpix (CMOSIS CMV20000) has been curved down to a radius of Rc = 150 mm over a size of 24x32 mm^2 . We present here the methodology adopted for its characterization and describe in detail all the results obtained. We also discuss the main components of noise, such as the readout noise, the fixed pattern noise and the dark current. Finally we provide a comparison with the flat version of the same sensor in order to establish the impact of the curving process on the main characteristics of the sensor.

astro-ph.IM↗
arXiv2018

First light with HiPERCAM on the GTC

HiPERCAM is a quintuple-beam imager that saw first light on the 4.2m William Herschel Telescope (WHT) in October 2017 and on the 10.4m Gran Telescopio Canarias (GTC) in February 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record ugriz (300-1000nm) images simultaneously on its five CCD cameras. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electrically to -90degC, thereby allowing both long-exposure, deep imaging of faint targets, as well as high-speed (over 1000 windowed frames per second) imaging of rapidly varying targets. In this paper, we report on the as-built design of HiPERCAM, its first-light performance on the GTC, and some of the planned future enhancements.

astro-ph.IM↗
arXiv2018

Curved detectors for wide field imaging systems: impact on tolerance analysis

In the present paper we consider quantitative estimation of the tolerances widening in optical systems with curved detectors. The gain in image quality allows to loosen the margins for manufacturing and assembling errors. On another hand, the requirements for the detector shape and positioning become more tight. We demonstrate both of the effects on example of two optical designs. The first one is a rotationally-symmetrical lens with focal length of 25 mm, f-ratio of 3.5 and field of view equal to 72$^\circ$, working in the visible domain. The second design is a three-mirror anastigmat telescope with focal length of 250 mm, f-ratio of 2.0 and field of view equal to $4^\circ \times 4^\circ$. In both of the cases use of curved detectors allow to increase the image quality and substantially decrease the requirements for manufacturing precision

astro-ph.IM↗
arXiv2017

Combining freeform optics and curved detectors for wide field imaging: a polynomial approach over squared aperture

In the recent years a significant progress was achieved in the field of design and fabrication of optical systems based on freeform optical surfaces. They provide a possibility to build fast, wide-angle and high-resolution systems, which are very compact and free of obscuration. However, the field of freeform surfaces design techniques still remains underexplored. In the present paper we use the mathematical apparatus of orthogonal polynomials defined over a square aperture, which was developed before for the tasks of wavefront reconstruction, to describe shape of a mirror surface. Two cases, namely Legendre polynomials and generalization of the Zernike polynomials on a square, are considered. The potential advantages of these polynomials sets are demonstrated on example of a three-mirror unobscured telescope with F/#=2.5 and FoV=7.2x7.2{\deg}. In addition, we discuss possibility of use of curved detectors in such a design.

astro-ph.IM↗
arXiv2016

Flexible focal plane arrays for UVOIR wide field instrumentation

LAM and CEA-LETI are developing the technology of deformable detectors, for UV, VIS or NIR applications. Such breakthrough devices will be a revolution for future wide field imagers and spectrographs, firstly by improving the image quality with better off-axis sharpness, resolution, brightness while scaling down the optical system, secondly by overcoming the manufacturing issues identified so far and by offering a flexibility and versatility in optical design. The technology of curved detectors can benefit of the developments of active and deformable structures, to provide a flexibility and a fine tuning of the detectors curvature by thinning down the substrate without modifying the fabrication process of the active pixels. We present studies done so far on optical design improvements, the technological demonstrators we developed and their performances as well as the future five-years roadmap for these developments.

astro-ph.IM↗
arXiv2014

The Visible and Infrared Survey Telescope for Astronomy (VISTA): Design, Technical Overview and Performance

The Visible and Infrared Survey Telescope for Astronomy (VISTA) is the 4-metre wide-field survey telescope at ESO's Paranal Observatory, equipped with the world's largest near-infrared imaging camera (VISTA IR Camera, VIRCAM), with 1.65 degree diameter field of view, and 67 Mpixels giving 0.6 square degrees active pixel area, operating at wavelengths 0.8 - 2.3 microns. We provide a short history of the project, and an overview of the technical details of the full system including the optical design, mirrors, telescope structure, IR camera, active optics, enclosure and software. The system includes several innovative design features such as the f/1 primary mirror, the dichroic cold-baffle camera design and the sophisticated wavefront sensing system delivering closed-loop 5-axis alignment of the secondary mirror. We conclude with a summary of the delivered performance, and a short overview of the six ESO public surveys in progress on VISTA.

astro-ph.IM↗
arXiv2014

Analysis of on-sky MOAO performance of CANARY using natural guide stars

The first on-sky results obtained by CANARY, the Multi-Object Adaptive Optics (MOAO) demonstrator, are analysed. The data were recorded at the William Herschel Telescope, at the end of September 2010. We describe the command and calibrations algorithms used during the run and present the observing conditions. The processed data are MOAO-loop engaged or disengaged slope buffers, comprising the synchronised measurements of the four Natural Guide Stars (NGS) wavefront sensors running in parallel, and near Infra-Red (IR) images. We describe the method we use to establish the error budget of CANARY. We are able to evaluate the to- mographic and the open loop errors, having median values around 216 nm and 110 nm respectively. In addition, we identify an unexpected residual quasi-static field aberration term of mean value 110 nm. We present the detailed error budget analysed for three sets of data for three different asterisms. We compare the experimental budgets with the numerically simulated ones and demonstrate a good agreement. We find also a good agreement between the computed error budget from the slope buffers and the measured Strehl ratio on the IR images, ranging between 10% and 20% at 1 530 nm. These results make us confident in our ability to establish the error budget of future MOAO instruments.

astro-ph.IM↗
arXiv2014

Two-component equations modelling water waves with constant vorticity

In this paper we derive a two-component system of nonlinear equations which model two-dimensional shallow water waves with constant vorticity. Then we prove well-posedness of this equation using a geometrical framework which allows us to recast this equation as a geodesic flow on an infinite dimensional manifold. Finally, we provide a criteria for global existence.

math-ph↗