arXiv subjects

David Grass

Publications and source records attributed to David Grass.

14 recordsLinked to original sources

arXiv2026

Evaluating the predictive power of pump-probe imaging contrast of melanin for metastatic outcome: A 71-patient study

Significance: Most melanoma deaths arise from metastatic spread, yet current staging imperfectly identifies which primary tumors will progress. Melanin structure is altered during malignant transformation, and pump-probe microscopy (PPM) measures melanin excited-state dynamics in standard biopsy sections, offering molecular contrast that is complementary to morphology-based assessment. Aim: To determine whether PPM-derived melanin excited-state dynamics in primary cutaneous melanoma can predict metastatic outcome. Approach: We imaged unstained sections from 71 primary cutaneous melanomas and 18 melanoma metastases. Transient absorption curves were fit to a biexponential excited-state model, and the fit parameters were used as features for learning classifiers to predict metastatic outcome. Results: Melanin dynamics separated primary from metastatic tissue: both excited-state lifetimes were shorter in primaries, with common-language effect sizes up to 0.26. The same parameters did not separate primary tumors by outcome (effect sizes 0.41-0.61), and univariate logistic regression found no significant association for either the excited-state lifetimes or the ESA/GSB ratio. The best classifier reached 74% patient-level accuracy (AUC 0.73), a plateau reached by several unrelated architectures. Conclusions: PPM robustly distinguishes primary from metastatic melanoma tissue, consistent with progressive melanin disaggregation. While it is clear that pump-probe features of melanin thus correlate with tissue differences, melanin dynamics in single sections of the primary tumor, confounded by heterogeneity, do not give robust predictions of metastatic outcome.

physics.optics↗

arXiv2025

Modular multi-axis stepper motor driver with remote control for use in microscopy

Mechanical translation of samples along several axes is often required in microscopy, and automated positioning requires motorizing the translation stages. Stepper motors are commonly employed but require specialized driver electronics for reliable operation. Here we describe a low-cost, open-source controller design that drives several stepper motors and implements important safety features, such as monitoring of mechanical limit switches, stall detection, and protective software limits. If rotational encoders in the motors or linear encoders on the stages are available, the controller can monitor the stage position and correct it in a feedback loop. The stages can be controlled with serial commands via USB, or optionally from a remote control box that incorporates a joystick for real-time multi-axis speed control, rotary dials for fine axis positioning, and a display to indicate the stage positions. To ease adoption, we provide driver libraries in Python and C, a driver for the commonly used microscopy control software $\mu$Manager, and an example graphical user interface for calibration and testing.

physics.optics↗

arXiv2024

Noninvasive identification of carbon-based black pigments with pump-probe microscopy

Carbon-based black pigments, a widely used class of pigments, are difficult to differentiate with the noninvasive techniques currently used in cultural heritage science. We utilize pump-probe microscopy to distinguish four common carbon-based black pigments as pure pigments, as two-component black pigment mixtures, and as a mixture of a black and a colorful pigment. This work also demonstrates that even nominally homogeneous pigments present remarkable, and useful, heterogeneity in pump-probe microscopy.

cond-mat.mtrl-sci↗

arXiv2023

Non-destructive Three-dimensional Imaging of Artificially Degraded CdS Paints by Pump-probe Microscopy

Cadmium sulfide (CdS) pigments have degraded in several well-known paintings, but the mechanisms of degradation have yet to be fully understood. Traditional non-destructive analysis techniques primarily focus on macroscopic degradation, whereas microscopic information is typically obtained with invasive techniques that require sample removal. Here, we demonstrate the use of pump-probe microscopy to nondestructively visualize the three-dimensional structure and degradation progress of CdS pigments in oil paints. CdS pigments, reproduced following historical synthesis methods, were artificially aged by exposure to high relative humidity (RH) and ultraviolet (UV) light. Pump-probe microscopy was applied to track the degradation progress in single grains, and volumetric imaging revealed early CdS degradation of small particles and on the surface of large particles. This indicates that the particle dimension influences the extent and evolution of degradation of historical CdS. In addition, the pump-probe signal decrease in degraded CdS is observable before visible changes to the eye, demonstrating that pump-probe microscopy is a promising tool to detect early-stage degradation in artworks. The observed degradation by pump-probe microscopy occurred through the conversion from CdS into CdSO4.xH2O, verified by both FTIR (Fourier-transform infrared) and XPS (X-ray photoelectron spectroscopy) experiment.

cond-mat.mtrl-sci↗

arXiv2022

Contrast mechanisms in pump-probe microscopy of melanin

Pump-probe microscopy of melanin in tumors has been proposed to improve diagnosis of malignant melanoma, based on the hypothesis that aggressive cancers disaggregate melanin structure. However, measured signals of melanin are complex superpositions of multiple nonlinear processes, which makes interpretation challenging. Polarization control during measurement and data fitting is used to decompose signals of melanin into their underlying molecular mechanisms. We then identify the molecular mechanisms that are most susceptible to melanin disaggregation and derive false-coloring schemes to highlight these processes in biological tissue. We exemplary demonstrate that false-colored images of a small set of melanoma tumors correlate with clinical concern. More generally, our systematic approach of decomposing pump-probe signals can be applied to a multitude of different samples.

physics.med-ph↗

arXiv2021

Nonequilibrium control of thermal and mechanical changes in a levitated system

Fluctuation theorems are fundamental extensions of the second law of thermodynamics for small nonequilibrium systems. While work and heat are equally important forms of energy exchange, fluctuation relations have not been experimentally assessed for the generic situation of simultaneous mechanical and thermal changes. Thermal driving is indeed generally slow and more difficult to realize than mechanical driving. Here, we use feedback cooling techniques to implement fast and controlled temperature variations of an underdamped levitated microparticle that are one order of magnitude faster than the equilibration time. Combining mechanical and thermal control, we verify the validity of a fluctuation theorem that accounts for both contributions, well beyond the range of linear response theory. Our results allow the investigation of general far-from-equilibrium processes in microscopic systems that involve fast mechanical and thermal changes at the same time.

cond-mat.stat-mech↗

arXiv2020

Beyond intensity modulation: new approaches to pump-probe microscopy

Pump-probe microscopy is an emerging nonlinear imaging technique based on high repetition rate lasers and fast intensity modulation. Here we present new methods for pump-probe microscopy that keep the beam intensity constant and instead modulate the inter-pulse time delay, the relative polarization, or the pulse length. These techniques can improve image quality for samples that have poor heat dissipation or long-lived radiative states, and can selectively address nonlinear interactions in the sample. We experimentally demonstrate this approach and point out the advantages over conventional intensity modulation.

physics.optics↗

arXiv2020

Thermodynamics of continuous non-Markovian feedback control

Feedback control mechanisms are ubiquitous in science and technology, and play an essential role in regulating physical, biological and engineering systems. The standard second law of thermodynamics does not hold in the presence of measurement and feedback. Most studies so far have extended the second law for discrete, Markovian feedback protocols; however, non-Markovian feedback is omnipresent in processes where the control signal is applied with a non-negligible delay. Here, we experimentally investigate the thermodynamics of continuous, time-delayed feedback control using the motion of an optically levitated, underdamped microparticle. We test the validity of a generalized second law which bounds the energy extracted from the system and study the breakdown of feedback cooling for very large time delays.

quant-ph↗

arXiv2019

Motional Quantum Ground State of a Levitated Nanoparticle from Room Temperature

We report quantum ground state cooling of a levitated nanoparticle in a room temperature environment. Using coherent scattering into an optical cavity we cool the center of mass motion of a $143$ nm diameter silica particle by more than $7$ orders of magnitude to $n_x=0.43\pm0.03$ phonons along the cavity axis, corresponding to a temperature of $12~μ$K. We infer a heating rate of $Γ_x/2π= 21\pm 3$ kHz, which results in a coherence time of $7.6~μ$s -- or $15$ coherent oscillations -- while the particle is optically trapped at a pressure of $10^{-6}$ mbar. The inferred optomechanical coupling rate of $g_x/2π= 71$ kHz places the system well into the regime of strong cooperativity ($C \approx 5$). We expect that a combination of ultra-high vacuum with free-fall dynamics will allow to further expand the spatio-temporal coherence of such nanoparticles by several orders of magnitude, thereby opening up new opportunities for macrosopic quantum experiments.

quant-ph↗

arXiv2019

Levitated cavity optomechanics in high vacuum

We report dispersive coupling of an optically trapped silica nanoparticle ($143~$nm diameter) to the field of a driven Fabry-Perot cavity in high vacuum ($4.3\times 10^{-6}~$mbar). We demonstrate nanometer-level control in positioning the particle with respect to the intensity distribution of the cavity field, which allows access to linear, quadratic and tertiary optomechanical interactions in the resolved sideband regime. We determine all relevant coupling rates of the system, i.e. mechanical and optical losses as well as optomechanical interaction, and obtain a quantum cooperativity of $C_Q = 0.01$. Based on the presented performance the regime of strong cooperativity ($C_Q > 1$) is clearly within reach by further decreasing the mode volume of the cavity.

physics.optics↗

arXiv2019

Cavity cooling of a levitated nanosphere by coherent scattering

We report three-dimensional cooling of a levitated nanoparticle inside an optical cavity. The cooling mechanism is provided by cavity-enhanced coherent scattering off an optical tweezer. The observed 3D dynamics and cooling rates are as theoretically expected from the presence of both linear and quadratic terms in the interaction between the particle motion and the cavity field. By achieving nanometer-level control over the particle location we optimize the position-dependent coupling and demonstrate axial cooling by two orders of magnitude at background pressures as high as $6\times10^{-2}$ mbar. We also estimate a significant ($> 40$ dB) suppression of laser phase noise, and hence of residual heating, which is a specific feature of the coherent scattering scheme. The observed performance implies that quantum ground state cavity cooling of levitated nanoparticles can be achieved for background pressures below $10^{-7}$ mbar.

quant-ph↗

arXiv2019

Near-field coupling of a levitated nanoparticle to a photonic crystal cavity

Quantum control of levitated dielectric particles is an emerging subject in quantum optomechanics. A major challenge is to efficiently measure and manipulate the particle's motion at the Heisenberg uncertainty limit. Here we present a nanophotonic interface suited to address this problem. By optically trapping a 150 nm silica particle and placing it in the near field of a photonic crystal cavity, we achieve tunable single-photon optomechanical coupling of up to $g_0/2π=9$ kHz, three orders of magnitude larger than previously reported for levitated cavity optomechanical systems. Efficient collection and guiding of light through the nanophotonic structure results in a per-photon displacement sensitivity that is increased by two orders of magnitude compared to conventional far-field detection. The demonstrated performance shows a promising route for room temperature quantum optomechanics.

quant-ph↗

arXiv2016

Optical trapping and control of nanoparticles inside evacuated hollow core photonic crystal fibers

We demonstrate an optical conveyor belt for levitated nano-particles over several centimeters inside both air-filled and evacuated hollow-core photonic crystal fibers (HCPCF). Detection of the transmitted light field allows three-dimensional read-out of the particle center-of-mass motion. An additional laser enables axial radiation pressure based feedback cooling over the full fiber length. We show that the particle dynamics is a sensitive local probe for characterizing the optical intensity profile inside the fiber as well as the pressure distribution along the fiber axis. In contrast to previous indirect measurement methods we find a linear pressure dependence inside the HCPCF extending over three orders of magnitude from 0.2 mbar to 100 mbar. A targeted application is the controlled delivery of nano-particles from ambient pressure into medium vacuum.

physics.optics↗

arXiv2013

Cavity cooling of an optically levitated nanoparticle

The ability to trap and to manipulate individual atoms is at the heart of current implementations of quantum simulations, quantum computing, and long-distance quantum communication. Controlling the motion of larger particles opens up yet new avenues for quantum science, both for the study of fundamental quantum phenomena in the context of matter wave interference, and for new sensing and transduction applications in the context of quantum optomechanics. Specifically, it has been suggested that cavity cooling of a single nanoparticle in high vacuum allows for the generation of quantum states of motion in a room-temperature environment as well as for unprecedented force sensitivity. Here, we take the first steps into this regime. We demonstrate cavity cooling of an optically levitated nanoparticle consisting of approximately 10e9 atoms. The particle is trapped at modest vacuum levels of a few millibar in the standing-wave field of an optical cavity and is cooled through coherent scattering into the modes of the same cavity. We estimate that our cooling rates are sufficient for ground-state cooling, provided that optical trapping at a vacuum level of 10e-7 millibar can be realized in the future, e.g., by employing additional active-feedback schemes to stabilize the optical trap in three dimensions. This paves the way for a new light-matter interface enabling room-temperature quantum experiments with mesoscopic mechanical systems.

quant-ph↗