arXiv subjects

David Avis

Publications and source records attributed to David Avis.

At least 19 recordsLinked to original sources

arXiv2026

On the volumes of the elliptope, metric polytope, and cut polytope

In this paper, we investigate the relationships between the volumes of four convex bodies: the cut polytope, metric polytope, rooted metric polytope, and elliptope, defined on graphs with n vertices. After an affine change of coordinates for the elliptope, the cut polytope is contained in each of the other three, which, for optimization purposes, provide polynomial-time relaxations. It is therefore of interest to see how tight these relaxations are. Worst-case ratio bounds are well known, but these are limited to objective functions with non-negative coefficients. Volume ratios, pioneered by Jon Lee with several co-authors, give global bounds and are the subject of this paper. For the rooted metric polytope over the complete graph, we show that for large n its volume is much greater than that of the elliptope. For the metric polytope, for small values of n, we show that its volume is smaller than that of the elliptope; however, for large values, we prove that the converse is true. Volume estimates place the crossover near n = 13. We also give exact formulae for the volumes of several families of sparse cut polytopes. In particular, we give an exact formula for the volume of the elliptope of every cycle and show that its volume ratio with the corresponding cut polytope converges rapidly to one.

cs.DM↗

arXiv2024

HV-symmetric polyhedra and bipolarity

A polyhedron is pointed if it contains at least one vertex. Every pointed polyhedron P in R^n can be described by an H-representation consisting of half spaces or equivalently by a V-representation consisting of the convex hull of a set of vertices and extreme rays. We can define matrices H(P) and V(P), each with n + 1 columns, that encode these representations. Define polyhedron Q by setting H(Q)=V(P). We show that Q is the polar of P. Call P HV-symmetric if V(Q) in turn encodes the H-representation of P. It is well known and often stated that polytopes that contain the origin in their interior and pointed polyhedral cones are HV-symmetric. We show here that, more generally, a pointed polyhedron with pointed polar is HV-symmetric if and only if it contains the origin. We show this using Minkowski's bipolar equation and discuss implications for the vertex and facet enumeration problems.

math.OC↗

arXiv2024

Parallel Redundancy Removal in lrslib with Application to Projections

We describe a parallel implementation in lrslib for removing redundant halfspaces and finding a minimum representation for an H-representation of a convex polyhedron. By a standard transformation, the same code works for V-representations. We use this approach to speed up the redundancy removal step in Fourier-Motzkin elimination. Computational results are given including a comparison with Clarkson's algorithm, which is particularly fast on highly redundant inputs.

math.OC↗

arXiv2023

A Note On Acyclic Token Sliding Reconfiguration Graphs of Independent Sets

We continue the study of token sliding reconfiguration graphs of independent sets initiated by the authors in an earlier paper (arXiv:2203.16861). Two of the topics in that paper were to study which graphs $G$ are token sliding graphs and which properties of a graph are inherited by a token sliding graph. In this paper we continue this study specializing on the case of when $G$ and/or its token sliding graph $\mathsf{TS}_k(G)$ is a tree or forest, where $k$ is the size of the independent sets considered. We consider two problems. The first is to find necessary and sufficient conditions on $G$ for $\mathsf{TS}_k(G)$ to be a forest. The second is to find necessary and sufficient conditions for a tree or forest to be a token sliding graph. For the first problem we give a forbidden subgraph characterization for the cases of $k=2,3$. For the second problem we show that for every $k$-ary tree $T$ there is a graph $G$ for which $\mathsf{TS}_{k+1}(G)$ is isomorphic to $T$. A number of other results are given along with a join operation that aids in the construction of $\mathsf{TS}_k(G)$-graphs.

math.CO↗

arXiv2022

On Reconfiguration Graphs of Independent Sets under Token Sliding

An independent set of a graph $G$ is a vertex subset $I$ such that there is no edge joining any two vertices in $I$. Imagine that a token is placed on each vertex of an independent set of $G$. The $\mathsf{TS}$- ($\mathsf{TS}_k$-) reconfiguration graph of $G$ takes all non-empty independent sets (of size $k$) as its nodes, where $k$ is some given positive integer. Two nodes are adjacent if one can be obtained from the other by sliding a token on some vertex to one of its unoccupied neighbors. This paper focuses on the structure and realizability of these reconfiguration graphs. More precisely, we study two main questions for a given graph $G$: (1) Whether the $\mathsf{TS}_k$-reconfiguration graph of $G$ belongs to some graph class $\mathcal{G}$ (including complete graphs, paths, cycles, complete bipartite graphs, connected split graphs, maximal outerplanar graphs, and complete graphs minus one edge) and (2) If $G$ satisfies some property $\mathcal{P}$ (including $s$-partitedness, planarity, Eulerianity, girth, and the clique's size), whether the corresponding $\mathsf{TS}$- ($\mathsf{TS}_k$-) reconfiguration graph of $G$ also satisfies $\mathcal{P}$, and vice versa. Additionally, we give a decomposition result for splitting a $\mathsf{TS}_k$-reconfiguration graph into smaller pieces.

math.CO↗

arXiv2021

On the foundations and extremal structure of the holographic entropy cone

The holographic entropy cone (HEC) is a polyhedral cone first introduced in the study of a class of quantum entropy inequalities. It admits a graph-theoretic description in terms of minimum cuts in weighted graphs, a characterization which naturally generalizes the cut function for complete graphs. Unfortunately, no complete facet or extreme-ray representation of the HEC is known. In this work, starting from a purely graph-theoretic perspective, we develop a theoretical and computational foundation for the HEC. The paper is self-contained, giving new proofs of known results and proving several new results as well. These are also used to develop two systematic approaches for finding the facets and extreme rays of the HEC, which we illustrate by recomputing the HEC on $5$ terminals and improving its graph description. We also report on some partial results for $6$ terminals. Some interesting open problems are stated throughout.

math.CO↗

arXiv2021

lrsarith: a small fixed/hybrid arithmetic C library

We describe lrsarith which is a small fixed precision and hybrid arithmetic C library for integers and rationals that we developed for use in the lrslib library for polyhedral computation. Using a generic set of operations, a program can be compiled with either 64-bit or 128-bit (if available) fixed precision, with an extended precision library such as GMP or the built-in MP routines. A simple scheme checks for overflow and either terminates the program or, in hybrid mode, changes to a higher precision arithmetic. Implementing these arithmetics in lrslib resulted in only minimal changes to the original code. We give computational results using lrs and mplrs, vertex/facet enumeration codes in lrslib, using 64 and 128 bit fixed integer arithmetic with and without overflow checking, GMP arithmetic, lrsarith hybrid arithmetic with both GMP and MP, and FLINT hybrid arithmetic. We give a small self-contained example C program using the lrsarith package in both fixed precision and hybrid mode.

cs.MS↗

arXiv2020

Sparktope: linear programs from algorithms

In a recent paper Avis, Bremner, Tiwary and Watanabe gave a method for constructing linear programs (LPs) based on algorithms written in a simple programming language called Sparks. If an algorithm produces the solution $x$ to a problem in polynomial time and space then the LP constructed is also of polynomial size and its optimum solution contains $x$ as well as a complete execution trace of the algorithm. Their method led us to the construction of a compiler called Sparktope which we describe in this paper. This compiler allows one to generate polynomial sized LPs for problems in P that have exponential extension complexity, such as matching problems in non-bipartite graphs. In this paper we describe Sparktope, the language Sparks, and the assembler instructions and LP constraints it produces. This is followed by two concrete examples, the makespan problem and the problem of testing if a matching in a graph is maximum, both of which are known to have exponential extension complexity. Computational results are given. In discussing these examples we make use of visualization techniques included in Sparktope that may be of independent interest. The extremely large linear programs produced by the compiler appear to be quite challenging to solve using currently available software. Since the optimum LP solutions can be computed independently they may be useful as benchmarks. Further enhancements of the compiler and its application are also discussed.

cs.DS↗

arXiv2019

An analysis of budgeted parallel search on conditional Galton-Watson trees

Recently Avis and Jordan have demonstrated the efficiency of a simple technique called budgeting for the parallelization of a number of tree search algorithms. The idea is to limit the amount of work that a processor performs before it terminates its search and returns any unexplored nodes to a master process. This limit is set by a critical budget parameter which determines the overhead of the process. In this paper we study the behaviour of the budget parameter on conditional Galton-Watson trees obtaining asymptotically tight bounds on this overhead. We present empirical results to show that this bound is surprisingly accurate in practice.

cs.DS↗

arXiv2019

mts: A light framework for parallelizing tree search codes

We describe mts, a generic framework for parallelizing certain types of tree search programs including reverse search, backtracking, branch and bound and satisfiability testing. It abstracts and generalizes the ideas used in parallelizing lrs, a reverse search code for vertex enumeration. mts supports sharing information between processes which is important for applications such as satisfiability testing and branch-and-bound. No parallelization is implemented in the legacy single processor programs minimizing the changes needed and simplying debugging. mts is written in C, uses MPI for parallelization and can be used on a network of computers. We give four examples of reverse search codes parallelized by using mts: topological sorts, spanning trees, triangulations and Galton-Watson trees. We also give a parallelization of two codes for satisfiability testing. We give experimental results comparing the parallel codes with other codes for the same problems.

cs.DC↗

arXiv2018

Polynomial size linear programs for problems in P

A perfect matching in an undirected graph $G=(V,E)$ is a set of vertex disjoint edges from $E$ that include all vertices in $V$. The perfect matching problem is to decide if $G$ has such a matching. Recently Rothvoß proved the striking result that the Edmonds' matching polytope has exponential extension complexity. Here for each $n=|V|$ we describe a perfect matching polytope that is different from Edmonds' polytope and define a weaker notion of extended formulation. We show that the new polytope has a weak extended formulation (WEF) $Q$ of polynomial size. For each graph $G$ with $n$ vertices we can readily construct an objective function so that solving the resulting linear program over $Q$ decides whether or not $G$ has a perfect matching. The construction is uniform in the sense that, for each $n$, a single polytope is defined for the class of all graphs with $n$ nodes. The method extends to solve poly time optimization problems, such as the weighted matching problem. In this case a logarithmic (in the weight of the optimum solution) number of optimizations are made over the constructed WEF. The method described in the paper involves construction of a compiler that converts an algorithm given in a prescribed pseudocode into a polytope. It can therefore be used to construct a polytope for any decision problem in {\bf P} which can be solved by a given algorithm. Compared with earlier results of Dobkin-Lipton-Reiss and Valiant our method allows the construction of explicit linear programs directly from algorithms written for a standard register model, without intermediate transformations. We apply our results to obtain polynomial upper bounds on the non-negative rank of certain slack matrices related to membership testing of languages in {\bf P/Poly}.

cs.DM↗

arXiv2018

Compact linear programs for 2SAT

For each integer $n$ we present an explicit formulation of a compact linear program, with $O(n^3)$ variables and constraints, which determines the satisfiability of any 2SAT formula with $n$ boolean variables by a single linear optimization. This contrasts with the fact that the natural polytope for this problem, formed from the convex hull of all satisfiable formulas and their satisfying assignments, has superpolynomial extension complexity. Our formulation is based on multicommodity flows. We also discuss connections of these results to the stable matching problem.

math.OC↗

arXiv2017

mplrs: A scalable parallel vertex/facet enumeration code

We describe a new parallel implementation, mplrs, of the vertex enumeration code lrs that uses the MPI parallel environment and can be run on a network of computers. The implementation makes use of a C wrapper that essentially uses the existing lrs code with only minor modifications. mplrs was derived from the earlier parallel implementation plrs, written by G. Roumanis in C++. plrs uses the Boost library and runs on a shared memory machine. In developing mplrs we discovered a method of balancing the parallel tree search, called budgeting, that greatly improves parallelization beyond the bottleneck encountered previously at around 32 cores. This method can be readily adapted for use in other reverse search enumeration codes. We also report some preliminary computational results comparing parallel and sequential codes for vertex/facet enumeration problems for convex polyhedra. The problems chosen span the range from simple to highly degenerate polytopes. For most problems tested, the results clearly show the advantage of using the parallel implementation mplrs of the reverse search based code lrs, even when as few as 8 cores are available. For some problems almost linear speedup was observed up to 1200 cores, the largest number of cores tested.

cs.MS↗

arXiv2016

A parallel framework for reverse search using mts

We describe mts, which is a generic framework for parallelizing certain types of tree search programs, that (a) provides a single common wrapper containing all of the parallelization, and (b) minimizes the changes needed to the existing single processor legacy code. The mts code was derived from ideas used to develop mplrs, a parallelization of the reverse search vertex enumeration code lrs. The tree search properties required for the use of mts are satisfied by any reverse search algorithm as well as other tree search methods such as backtracking and branch and bound. mts is programmed in C, uses the MPI parallel environment, and can be run on a network of computers. As examples we parallelize two simple existing reverse search codes: generating topological orderings and generating spanning trees of a graph. We give computational results comparing the parallel codes with state of the art sequential codes for the same problems.

cs.DC↗

arXiv2016

Comparative computational results for some vertex and facet enumeration codes

We report some computational results comparing parallel and sequential codes for vertex/facet enumeration problems for convex polyhedra. The problems chosen span the range from simple to highly degenerate polytopes. We tested one code (lrs) based on pivoting and four codes (cddr+, ppl, normaliz, PORTA) based on the double description method. normaliz employs parallelization as do the codes plrs and mplrs which are based on lrs. We tested these codes using various hardware configurations with up to 1200 cores. Major speedups were obtained by parallelization, particularly by the code mplrs which uses MPI and can operate on clusters of machines.

cs.MS↗

arXiv2015

On the H-Free Extension Complexity of the TSP

It is known that the extension complexity of the TSP polytope for the complete graph $K_n$ is exponential in $n$ even if the subtour inequalities are excluded. In this article we study the polytopes formed by removing other subsets $\mathcal{H}$ of facet-defining inequalities of the TSP polytope. In particular, we consider the case when $\mathcal{H}$ is either the set of blossom inequalities or the simple comb inequalities. These inequalities are routinely used in cutting plane algorithms for the TSP. We show that the extension complexity remains exponential even if we exclude these inequalities. In addition we show that the extension complexity of polytope formed by all comb inequalities is exponential. For our proofs, we introduce a subclass of comb inequalities, called $(h,t)$-uniform inequalities, which may be of independent interest.

cs.CC↗

arXiv2014

A generalization of extension complexity that captures $P$

In this paper we propose a generalization of the extension complexity of a polyhedron $Q$. On the one hand it is general enough so that all problems in $P$ can be formulated as linear programs with polynomial size extension complexity. On the other hand it still allows non-polynomial lower bounds to be proved for $NP$-hard problems independently of whether or not $P=NP$. The generalization, called $H$-free extension complexity, allows for a set of valid inequalities $H$ to be excluded in computing the extension complexity of $Q$. We give results on the $H$-free extension complexity of hard matching problems (when $H$ are the odd set inequalities) and the traveling salesman problem (when $H$ are the subtour elimination constraints).

cs.CC↗

arXiv2013

An exponential lower bound for Cunningham's rule

In this paper we give an exponential lower bound for Cunningham's least recently considered (round-robin) rule as applied to parity games, Markhov decision processes and linear programs. This improves a recent subexponential bound of Friedmann for this rule on these problems. The round-robin rule fixes a cyclical order of the variables and chooses the next pivot variable starting from the previously chosen variable and proceeding in the given circular order. It is perhaps the simplest example from the class of history-based pivot rules. Our results are based on a new lower bound construction for parity games. Due to the nature of the construction we are also able to obtain an exponential lower bound for the round-robin rule applied to acyclic unique sink orientations of hypercubes (AUSOs). Furthermore these AUSOs are realizable as polytopes. We believe these are the first such results for history based rules for AUSOs, realizable or not. The paper is self-contained and requires no previous knowledge of parity games.

cs.CC↗