arXiv subjects

Dario Maggiolo

Publications and source records attributed to Dario Maggiolo.

7 recordsLinked to original sources

arXiv2026

A coupled lattice Boltzmann model for pore-scale mushy-layer dynamics with application to sea ice

A pore-scale lattice Boltzmann model is developed for reactive transport in phase-changing porous media, coupling solute transport in the liquid with conjugate heat transfer across the solid and liquid phases. Two methodological developments are introduced: a novel link-based Volume-of-Pixel formulation for direction-dependent interface motion, and a generalized Robin boundary treatment for solute redistribution at moving interfaces. The phase-change formulation is validated against thermal benchmarks, while the Robin treatment is assessed through literature test cases, exhibiting convergence rates between first and second order. The coupled model is then applied to a local pore-scale segment of a sea ice brine channel in a purely diffusive regime. The simulations recover the expected ideal mushy-layer behaviour under appropriate scale separation. At sea-ice-relevant concentration ratios, thermal perturbations produce relatively large variations in brine salinity, causing freezing rather than melting to reshape the pore geometry in a non-uniform way. The resulting framework provides a pore-scale numerical tool for resolving coupled temperature, solute redistribution, and phase-boundary dynamics in mushy layers.

physics.flu-dyn↗

arXiv2026

Finite-time mixing and reaction in packed bed reactors

We investigate mixing dynamics in porous media at finite times, using pore-scale lattice-Boltzmann simulations combined with Lagrangian particle tracking. We compute fluid deformation in randomly packed beds based on the moving Protean frame approach introduced by Lester 2018. From the extracted Lagrangian kinematics, we construct a mixing model based on lamellar aggregation that well predicts the Eulerian scalar fields obtained from simulations. Our results reveal an early time mixing regime dominated by shear-driven fluid deformation, where solute mixing arises from the random overlap of diffusive concentration elements. In this regime, mixing proceeds slowly and follows a temporal decay of concentration variance, $σ_c^2 \sim Pe^{-α/(2α+1)} t^{-1/2}$, where Pe is the Peclet number and $α$ the exponent characterizing shear deformation. This dynamic arises when the Peclet number is small relative to the ratio between the exponential-mixing and shear-deformation timescales. This analysis also demonstrates that shear-induced mixing govern the homogenization of early-stage reactions at the fluid-solid interface in finite-size random packed beds, typically operating at moderate Peclet numbers $Pe =O(10^2)$.

physics.flu-dyn↗

arXiv2025

Dynamics of contaminant flow through porous media containing random adsorbers

Many porous media are mixtures of inert and reactive materials, manifesting spatio-chemical heterogeneity. We study the evolution of scalar transport in a chemically heterogeneous material that mimics a green roof soil substrate, fractionally composed of inert and reactive adsorbing particles. These adsorbing particles are equivalent to biochar within a real soil substrate. The scalar transport evolution is determined using experiments and simulations calibrated from experimental data. Experiment 1 is used to determine the equilibrium capacity and adsorption rate of two biochar types when immersed in a methylene blue solution. Breakthrough curves of a packed bed of glass beads with randomly interspersed biochar are determined in experiment 2. Simulations are then run to investigate the solute transport and adsorption dynamics at the pore-scale. An analytical model is proposed to capture the behavior of the biochar adsorption capacity and the simulation results are compared with experiment 2. A pore-scale analysis showed that uniformly sized beds are superior in contaminant breakthrough reduction, which is related to the adsorptive surface area and the rate at which adsorption capacity is reached. Cases using the adsorption capacity model display a tight distribution of particle surface concentration at later simulation times, indicating maximum possible adsorption. The beds with dissimilar particle sizes create more channeling effects which reduce adsorptive particle efficiency and consequently higher breakthrough concentration profiles. Comparison between experiments and simulations show good agreement. Improved biochar performance can be achieved by maintaining particle size uniformity alongside high adsorption capacity and adsorption rates appropriate to the rainfall intensity.

physics.flu-dyn↗

arXiv2023

Transition from diffusion to advection controlled contaminant adsorption in saturated chemically heterogeneous porous subsurfaces

We show the impact that scalar structures deformation and mixing has on the fate of plumes of waterborne contaminant transported through a chemically heterogeneous, partially adsorbing porous medium. Via pore-scale simulations, we follow the dynamic of a passive scalar injected in a packed bed consisting of a mixture of chemically inert and adsorbing spherical particles. By varying the fraction of the adsorbers $ξ$, randomly distributed in the porous volume, we find that the waterborne solute forms concentration plumes emerging between pairs of adsorbing particles. This deformation is a consequence of the different mechanisms of transport characterising the transport of molecules in the proximal and remote pores relative to the adsorbers, diffusion and advection, respectively. The resulting isoscalar surface embedding the plumes grows at a rate proportional to the average pore-scale velocity $U$ and inversely proportional to the adsorbers' interparticle dimensionless distance, i.e. $γ\propto U/\ell_ξ$. We provide a quantification of the characteristic diffusive time scale of the plume $t_η\propto \ell_ξ^2/D_m$, which dissipates the concentration differences in the vicinity of the adsorbers. Thus, by quantifying the relative importance of the advection-sustained stretching rate $γ$ and plume mixing rate $1/t_η$ for different values of fraction of adsorbers $ξ$, we establish a transition from diffusion- to advection- dominated macroscopic adsorption, whose time evolutions scale as $\propto \sqrt{t}$ and $\propto t$, respectively. Such a transition is determined by the amount of adsorbers within the medium, with diffusion and advection dominating at high and low fractions, respectively. Our numerical analysis provides $\ell_ξ/d \approx 4/\ln(2) \textit{Pe}^{-1}$ as the critical distance between adsorbers that sets the transition, being $d$ the pore size.

physics.flu-dyn↗

arXiv2021

Asymmetric invasion in anisotropic porous media

We report and discuss, by means of pore-scale numerical simulations, the possibility of achieving a directional-dependent two-phase flow behaviour during the process of invasion of a viscous fluid into anisotropic porous media with controlled design. By customising the pore-scale morphology and heterogeneities with the adoption of anisotropic triangular pillars distributed with quenched disorder, we observe a substantially different invasion dynamics according to the direction of fluid injection relative to the medium orientation, that is depending if the triangular pillars have their apex oriented (flow-aligned) or opposed (flow-opposing) to the main flow direction. Three flow regimes can be observed: (i) for low values of the ratio between the macroscopic pressure drop and the characteristic pore-scale capillary threshold, i.e. for p0/pc < 1, the fluid invasion dynamics is strongly impeded and the viscous fluid is unable to reach the outlet of the medium, irrespective of the direction of injection; (ii) for intermediate values, 1 < p0/pc < 2, the viscous fluid reaches the outlet only when the triangular pillars are flow-opposing oriented; (iii) for larger values, i.e for p0/pc > 2, the outlet is again reached irrespective of the direction of injection. The porous medium anisotropy induces a lower effective resistance when the pillars are flow-opposing oriented, suppressing front roughening and capillary fingering. We thus argue that the invasion process occurs as long as the pressure drop is larger then the macroscopic capillary pressure determined by the front roughness, which in the case of flow-opposing pillars is halved.

physics.flu-dyn↗

arXiv2020

Pore-Scale Transport and Two-Phase Fluid Structures in Fibrous Porous Layers: Application to Fuel Cells and Beyond

We present pore-scale simulations of two-phase flows in a reconstructed fibrous porous layer. The three dimensional microstructure of the material, a fuel cell gas diffusion layer, is acquired via X-ray computed tomography and used as input for lattice Boltzmann simulations. We perform a quantitative analysis of the multiphase pore-scale dynamics and we identify the dominant fluid structures governing mass transport. The results show the existence of three different regimes of transport: a fast inertial dynamics at short times, characterised by a compact uniform front, a viscous-capillary regime at intermediate times, where liquid is transported along a gradually increasing number of preferential flow paths of the size of one-two pores, and a third regime at longer times, where liquid, after having reached the outlet, is exclusively flowing along such flow paths and the two-phase fluid structures are stabilised. We observe that the fibrous layer presents significant variations in its microscopic morphology, which have an important effect on the pore invasion dynamics, and counteract the stabilising viscous force. Liquid transport is indeed affected by the presence of microstructure-induced capillary pressures acting adversely to the flow, leading to capillary fingering transport mechanism and unstable front displacement, even in the absence of hydrophobic treatments of the porous material. We propose a macroscopic model based on an effective contact angle that mimics the effects of the such a dynamic capillary pressure. Finally, we underline the significance of the results for the optimal design of face masks in an effort to mitigate the current COVID-19 pandemic.

physics.flu-dyn↗

arXiv2016

Flow and dispersion in anisotropic porous media: a Lattice-Boltzmann study

Given their capability of spreading active chemical species and collecting electricity, porous media made of carbon fibers are extensively used as diffusion layers in energy storage systems, such as redox flow batteries. In spite of this, the dispersion dynamics of species inside porous media is still not well understood and often lends itself to different interpretations. Actually, the microscopic design of efficient porous media which can potentially and effectively improve the performances of flow batteries, is a still open challenge. The present study aims to investigate the effect of fibrous media micro-structure on dispersion, in particular the effect of fiber orientation on drag and dispersion dynamics. Several Lattice-Boltzmann simulations of {flows through} differently-oriented fibrous media coupled with Lagrangian simulations of particle tracers have been performed. Results show that orienting fibers preferentially along the streamwise direction minimizes the drag and maximizes the dispersion, which is the most desirable condition for diffusion layers in flow batteries applications.

physics.flu-dyn↗