arXiv subjects

Daniil Lisus

Publications and source records attributed to Daniil Lisus.

17 recordsLinked to original sources

arXiv2026

Do Spinning Radar Doppler Velocity Measurements Improve Vehicle Detection and Tracking?

Spinning frequency-modulated continuous-wave (FMCW) radars have been gaining popularity in autonomous vehicle perception on account of their robustness to adverse weather conditions and 360° field of view. Recently, scanning radars have also been shown capable of generating per-azimuth Doppler velocity. In this paper, we investigate whether these Doppler velocity measurements improve spinning radar vehicle detection and tracking performance. For detection, we estimate the ego motion and use it to undo the Doppler range distortion of the radar image before passing it to a network. For tracking, we propose a new way to estimate a per-vehicle velocity and use it as a prior for the tracker's motion model. Since Doppler-enabled spinning radar data is not available in any dataset with ground-truth dynamic object labels, our first contribution is an automatic labelling pipeline that uses an ensemble of fine-tuned off-the-shelf lidar detectors to label all 643 km of the Boreas Road Trip dataset. We then transfer detections to radar, and use over 250 km of vehicle-dense sequences as ground-truth training data. By training and evaluating two state-of-the-art detectors, we show that Doppler undistortion can improve detection accuracy by up to $2.37$ points on mean average precision. Furthermore, we show that the Doppler velocity prior can improve tracking accuracy by $13.68$ points on multi-object tracking accuracy (MOTA) versus the zero-velocity initialization baseline, while achieving $99.7\%$ of the MOTA obtained using ground-truth velocities as the prior.

cs.RO↗

arXiv2026

Boreas Road Trip: A Multi-Sensor Autonomous Driving Dataset on Challenging Roads

The Boreas Road Trip (Boreas-RT) dataset extends the multi-season Boreas dataset to new and diverse locations that pose challenges for modern autonomous driving algorithms. Boreas-RT comprises 60 sequences collected over 9 real-world routes, totalling 643 km of driving. Each route is traversed multiple times, enabling evaluation in identical environments under varying traffic and, in some cases, weather conditions. The data collection platform includes a 5MP FLIR Blackfly S camera, a 360 degree Navtech RAS6 Doppler-enabled spinning radar, a 128-channel 360 degree Velodyne Alpha Prime lidar, an Aeva Aeries II FMCW Doppler-enabled lidar, a Silicon Sensing DMU41 inertial measurement unit, and a Dynapar wheel encoder. Centimetre-level ground truth is provided via post-processed Applanix POS LV GNSS-INS data. The dataset includes precise extrinsic and intrinsic calibrations, a publicly available development kit, and a live leaderboard for odometry and metric localization. Benchmark results show that many state-of-the-art odometry and localization algorithms overfit to simple driving environments and degrade significantly on the more challenging Boreas-RT routes. Boreas-RT provides a unified dataset for evaluating multi-modal algorithms across diverse road conditions. The dataset, leaderboard, and development kit are available at www.boreas.utias.utoronto.ca.

cs.RO↗

arXiv2026

2Fast-2Lamaa: Large-Scale Lidar-Inertial Localization and Mapping with Continuous Distance Fields

This paper introduces 2Fast-2Lamaa, a lidar-inertial state estimation framework for odometry, mapping, and localization. Its first key component is the optimization-based undistortion of lidar scans, which uses continuous IMU preintegration to model the system's pose at every lidar point timestamp. The continuous trajectory over 100-200ms is parameterized only by the initial scan conditions (linear velocity and gravity orientation) and IMU biases, yielding eleven state variables. These are estimated by minimizing point-to-line and point-to-plane distances between lidar-extracted features without relying on previous estimates, resulting in a prior-less motion-distortion correction strategy. Because the method performs local state estimation, it directly provides scan-to-scan odometry. To maintain geometric consistency over longer periods, undistorted scans are used for scan-to-map registration. The map representation employs Gaussian Processes to form a continuous distance field, enabling point-to-surface distance queries anywhere in space. Poses of the undistorted scans are refined by minimizing these distances through non-linear least-squares optimization. For odometry and mapping, the map is built incrementally in real time; for pure localization, existing maps are reused. The incremental map construction also includes mechanisms for removing dynamic objects. We benchmark 2Fast-2Lamaa on over 750km of public and self-collected datasets from both automotive and handheld systems. The framework achieves state-of-the-art performance across diverse and challenging scenarios, reaching odometry and localization errors as low as 0.22\% and 0.06 m, respectively. The real-time implementation is publicly available at https://github.com/clegenti/2fast2lamaa.

cs.RO↗

arXiv2026

DRT&R: Direct Radar Teach & Repeat

Radar-based navigation is appealing for its robustness to adverse conditions involving airborne particles, such as precipitation, dust, fog, and smoke, that can cause lidar-based systems to fail. Recently, direct methods that retain and use the entire radar scan rather than sparse points have improved on-road global localization performance. However, they have yet to be deployed in off-road environments or in closed-loop systems. Additionally, even direct global maps may lose information: their global nature leads to a smoothing out of viewpoint-dependent radar artifacts, which can provide pose information when mapping and localization occur along similar trajectories. This paper introduces Direct Radar Teach & Repeat (DRT&R): a direct spinning radar-based navigation stack that maximizes the amount of retained information by combining direct radar processing with local mapping. DRT&R yields state-of-the-art (SOTA) localization performance in both on-road and off-road environments. Using 344 km of on-road data and 20 km of off-road data, DRT&R is able to localize to within 4 cm in most on-road and off-road conditions, and 12 cm in geometrically degenerate and sparse environments. DRT&R is also evaluated autonomously in closed loop with an MPC controller for more than 10 km using a Clearpath Warthog off-road vehicle, demonstrating that it runs in real time and achieves SOTA tracking performance for off-road radar navigation.

cs.RO↗

arXiv2026

3DRO: Lidar-level SE(3) Direct Radar Odometry Using a 2D Imaging Radar and a Gyroscope

Recently, the robotics community has regained interest in radar-based perception and state estimation. A 2D imaging radar provides dense 360deg information about the environment. Despite the radar antenna's cone of emission and reception, the collected data is generally assumed to be limited to the plane orthogonal to the radar's spinning axis. Accordingly, most methods based on 2D imaging radars only perform SE(2) state estimation. This paper presents 3DRO, an extension of the SE(2) Direct Radar Odometry (DRO) framework to perform state estimation in SE(3). While still assuming planarity of the data through DRO's 2D velocity estimates, it integrates 3D gyroscope measurements over SO(3) to estimate SE(3) ego motion. While simple, this approach provides lidar-level odometry accuracy as demonstrated using 643km of data from the Boreas-RT dataset.

cs.RO↗

arXiv2026

Balancing Act: Trading Off Odometry and Map Registration for Efficient Lidar Localization

Most autonomous vehicles rely on accurate and efficient localization, which is achieved by comparing live sensor data to a preexisting map, to navigate their environment. Balancing the accuracy of localization with computational efficiency remains a significant challenge, as high-accuracy methods often come with higher computational costs. In this paper, we present two ways of improving lidar localization efficiency and study their impact on performance. First, we integrate two lightweight odometry estimators, a correspondence-free Doppler-inertial estimator and a low-cost wheel odometer-gyroscope (OG) method, into a topometric localization pipeline and compare them against a state-of-the-art (SOTA) iterative closest point (ICP) baseline. We highlight the trade-offs between these approaches: the Doppler and OG estimators offer faster, lightweight updates, while ICP provides higher accuracy at the cost of increased computational load. Second, by controlling the frequency of localization updates and leveraging odometry estimates between them, we demonstrate that accurate localization can be maintained while optimizing for computational efficiency using any of the presented methods. We evaluate these approaches using over 100 km of unique real-world driving data in different on-road environments. By varying the localization interval, we demonstrate that computational effort can be reduced by 27%, 80%, and 91% for the ICP, Doppler, and OG estimators, respectively, while maintaining SOTA accuracy.

cs.RO↗

arXiv2026

Dr-BA: Separable Optimization for Direct Radar Bundle Adjustment & Localization

This paper introduces Dr-BA, a first-of-its-kind radar bundle adjustment (BA) framework that operates directly on 2D spinning radar intensity images. Unlike camera or lidar sensors, radar is largely unaffected by precipitation, making it a critical modality for autonomous systems that require all-weather robustness. Existing state estimation approaches using spinning radar typically extract sparse point clouds from range-azimuth-intensity measurements and apply point cloud alignment techniques to estimate vehicle motion, scene structure, or to localize within an existing map. In contrast, Dr-BA uses the full radar returns from multiple scans to jointly estimate dense maps and sensor poses. By formulating the problem as a separable optimization, we derive an efficient and general solution that decouples pose estimation from mapping. In addition to solving the BA problem, this formulation naturally extends to direct radar-only localization (DRL) within a previously built map. Dr-BA achieves state-of-the-art radar-based BA and cross-session localization performance, demonstrated on more than 200 km of on-road data across five distinct routes. Our implementation is publicly available at https://github.com/utiasASRL/dr_ba.

cs.RO↗

arXiv2025

Prepared for the Worst: A Learning-Based Adversarial Attack for Resilience Analysis of the ICP Algorithm

This paper presents a novel method for assessing the resilience of the ICP algorithm via learning-based, worst-case attacks on lidar point clouds. For safety-critical applications such as autonomous navigation, ensuring the resilience of algorithms before deployments is crucial. The ICP algorithm is the standard for lidar-based localization, but its accuracy can be greatly affected by corrupted measurements from various sources, including occlusions, adverse weather, or mechanical sensor issues. Unfortunately, the complex and iterative nature of ICP makes assessing its resilience to corruption challenging. While there have been efforts to create challenging datasets and develop simulations to evaluate the resilience of ICP, our method focuses on finding the maximum possible ICP error that can arise from corrupted measurements at a location. We demonstrate that our perturbation-based adversarial attacks can be used pre-deployment to identify locations on a map where ICP is particularly vulnerable to corruptions in the measurements. With such information, autonomous robots can take safer paths when deployed, to mitigate against their measurements being corrupted. The proposed attack outperforms baselines more than 88% of the time across a wide range of scenarios.

cs.RO↗

arXiv2025

Do We Still Need to Work on Odometry for Autonomous Driving?

Over the past decades, a tremendous amount of work has addressed the topic of ego-motion estimation of moving platforms based on various proprioceptive and exteroceptive sensors. At the cost of ever-increasing computational load and sensor complexity, odometry algorithms have reached impressive levels of accuracy with minimal drift in various conditions. In this paper, we question the need for more research on odometry for autonomous driving by assessing the accuracy of one of the simplest algorithms: the direct integration of wheel encoder data and yaw rate measurements from a gyroscope. We denote this algorithm as Odometer-Gyroscope (OG) odometry. This work shows that OG odometry can outperform current state-of-the-art radar-inertial SE(2) odometry for a fraction of the computational cost in most scenarios. For example, the OG odometry is on top of the Boreas leaderboard with a relative translation error of 0.20%, while the second-best method displays an error of 0.26%. Lidar-inertial approaches can provide more accurate estimates, but the computational load is three orders of magnitude higher than the OG odometry. To further the analysis, we have pushed the limits of the OG odometry by purposely violating its fundamental no-slip assumption using data collected during a heavy snowstorm with different driving behaviours. Our conclusion shows that a significant amount of slippage is required to result in non-satisfactory pose estimates from the OG odometry.

cs.RO↗

arXiv2025

Pointing the Way: Refining Radar-Lidar Localization Using Learned ICP Weights

This paper presents a novel deep-learning-based approach to improve localizing radar measurements against lidar maps. This radar-lidar localization leverages the benefits of both sensors; radar is resilient against adverse weather, while lidar produces high-quality maps in clear conditions. However, owing in part to the unique artefacts present in radar measurements, radar-lidar localization has struggled to achieve comparable performance to lidar-lidar systems, preventing it from being viable for autonomous driving. This work builds on ICP-based radar-lidar localization by including a learned preprocessing step that weights radar points based on high-level scan information. To train the weight-generating network, we present a novel, stand-alone, open-source differentiable ICP library. The learned weights facilitate ICP by filtering out harmful radar points related to artefacts, noise, and even vehicles on the road. Combining an analytical approach with a learned weight reduces overall localization errors and improves convergence in radar-lidar ICP results run on real-world autonomous driving data. Our code base is publicly available to facilitate reproducibility and extensions.

cs.RO↗

arXiv2025

The Finer Points: A Systematic Comparison of Point-Cloud Extractors for Radar Odometry

A key element of many odometry pipelines using spinning frequency-modulated continuous-wave (FMCW) radar is the extraction of a point-cloud from the raw signal. This extraction greatly impacts the overall performance of point-cloud-based odometry. This paper provides a first-of-its-kind, comprehensive comparison of 13 common radar point-cloud extractors for the task of iterative closest point based odometry in autonomous driving environments. Each extractor's parameters are tuned and tested on two FMCW radar datasets using approximately 176km of data from public roads. We find that the simplest, and fastest extractor, K-strongest, is the best overall extractor, consistently outperforming the average by 13.59% and 24.94% on each dataset, respectively. Additionally, we highlight the significance of tuning an extractor and the substantial improvement in odometry accuracy that it yields.

cs.RO↗

arXiv2025

DRO: Doppler-Aware Direct Radar Odometry

A renaissance in radar-based sensing for mobile robotic applications is underway. Compared to cameras or lidars, millimetre-wave radars have the ability to `see' through thin walls, vegetation, and adversarial weather conditions such as heavy rain, fog, snow, and dust. In this paper, we propose a novel SE(2) odometry approach for spinning frequency-modulated continuous-wave radars. Our method performs scan-to-local-map registration of the incoming radar data in a direct manner using all the radar intensity information without the need for feature or point cloud extraction. The method performs locally continuous trajectory estimation and accounts for both motion and Doppler distortion of the radar scans. If the radar possesses a specific frequency modulation pattern that makes radial Doppler velocities observable, an additional Doppler-based constraint is formulated to improve the velocity estimate and enable odometry in geometrically feature-deprived scenarios (e.g., featureless tunnels). Our method has been validated on over 250km of on-road data sourced from public datasets (Boreas and MulRan) and collected using our automotive platform. With the aid of a gyroscope, it outperforms state-of-the-art methods and achieves an average relative translation error of 0.26% on the Boreas leaderboard. When using data with the appropriate Doppler-enabling frequency modulation pattern, the translation error is reduced to 0.18% in similar environments. We also benchmarked our algorithm using 1.5 hours of data collected with a mobile robot in off-road environments with various levels of structure to demonstrate its versatility. Our real-time implementation is publicly available: https://github.com/utiasASRL/dro.

cs.RO↗

arXiv2024

Are Doppler Velocity Measurements Useful for Spinning Radar Odometry?

Spinning, frequency-modulated continuous-wave (FMCW) radars with 360 degree coverage have been gaining popularity for autonomous-vehicle navigation. However, unlike `fixed' automotive radar, commercially available spinning radar systems typically do not produce radial velocities due to the lack of repeated measurements in the same direction and the fundamental hardware setup. To make these radial velocities observable, we modified the firmware of a commercial spinning radar to use triangular frequency modulation. In this paper, we develop a novel way to use this modulation to extract radial Doppler velocity measurements from consecutive azimuths of a radar intensity scan, without any data association. We show that these noisy, error-prone measurements contain enough information to provide good ego-velocity estimates, and incorporate these estimates into different modern odometry pipelines. We extensively evaluate the pipelines on over 110 km of driving data in progressively more geometrically challenging autonomous-driving environments. We show that Doppler velocity measurements improve odometry in well-defined geometric conditions and enable it to continue functioning even in severely geometrically degenerate environments, such as long tunnels.

cs.RO↗

arXiv2024

Toward Certifying Maps for Safe Registration-based Localization Under Adverse Conditions

In this paper, we propose a way to model the resilience of the Iterative Closest Point (ICP) algorithm in the presence of corrupted measurements. In the context of autonomous vehicles, certifying the safety of the localization process poses a significant challenge. As robots evolve in a complex world, various types of noise can impact the measurements. Conventionally, this noise has been assumed to be distributed according to a zero-mean Gaussian distribution. However, this assumption does not hold in numerous scenarios, including adverse weather conditions, occlusions caused by dynamic obstacles, or long-term changes in the map. In these cases, the measurements are instead affected by large and deterministic faults. This paper introduces a closed-form formula approximating the pose error resulting from an ICP algorithm when subjected to the most detrimental adverse measurements. Using this formula, we develop a metric to certify and pinpoint specific regions within the environment where the robot is more vulnerable to localization failures in the presence of faults in the measurements.

cs.RO↗

arXiv2023

Towards Open World NeRF-Based SLAM

Neural Radiance Fields (NeRFs) offer versatility and robustness in map representations for Simultaneous Localization and Mapping (SLAM) tasks. This paper extends NICE-SLAM, a recent state-of-the-art NeRF-based SLAM algorithm capable of producing high quality NeRF maps. However, depending on the hardware used, the required number of iterations to produce these maps often makes NICE-SLAM run at less than real time. Additionally, the estimated trajectories fail to be competitive with classical SLAM approaches. Finally, NICE-SLAM requires a grid covering the considered environment to be defined prior to runtime, making it difficult to extend into previously unseen scenes. This paper seeks to make NICE-SLAM more open-world-capable by improving the robustness and tracking accuracy, and generalizing the map representation to handle unconstrained environments. This is done by improving measurement uncertainty handling, incorporating motion information, and modelling the map as having an explicit foreground and background. It is shown that these changes are able to improve tracking accuracy by 85% to 97% depending on the available resources, while also improving mapping in environments with visual information extending outside of the predefined grid.

cs.RO↗

arXiv2023

Know What You Don't Know: Consistency in Sliding Window Filtering with Unobservable States Applied to Visual-Inertial SLAM (Extended Version)

Estimation algorithms, such as the sliding window filter, produce an estimate and uncertainty of desired states. This task becomes challenging when the problem involves unobservable states. In these situations, it is critical for the algorithm to ``know what it doesn't know'', meaning that it must maintain the unobservable states as unobservable during algorithm deployment. This letter presents general requirements for maintaining consistency in sliding window filters involving unobservable states. The value of these requirements for designing navigation solutions is experimentally shown within the context of visual-inertial SLAM making use of IMU preintegration.

cs.RO↗

arXiv2021

Heading Estimation Using Ultra-Wideband Received Signal Strength and Gaussian Processes

It is essential that a robot has the ability to determine its position and orientation to execute tasks autonomously. Heading estimation is especially challenging in indoor environments where magnetic distortions make magnetometer-based heading estimation difficult. Ultra-wideband (UWB) transceivers are common in indoor localization problems. This letter experimentally demonstrates how to use UWB range and received signal strength (RSS) measurements to estimate robot heading. The RSS of a UWB antenna varies with its orientation. As such, a Gaussian process (GP) is used to learn a data-driven relationship from UWB range and RSS inputs to orientation outputs. Combined with a gyroscope in an invariant extended Kalman filter, this realizes a heading estimation method that uses only UWB and gyroscope measurements.

cs.RO↗