arXiv subjects

Daniel Wortmann

Publications and source records attributed to Daniel Wortmann.

18 recordsLinked to original sources

arXiv2026

Towards Non-van der Waals 2D Topological Insulators

Non-van der Waals two-dimensional (2D) materials derived from strongly bonded non-layered crystals have recently emerged as a novel and rising platform for nanoscale research. While uncovering and tuning their (opto-)electronic, catalytic, and magnetic properties has been the focus of intense research, the impact of spin-orbit coupling (SOC) onto their electronic structure has not yet been explored in detail. Studying these effects is, however, particularly relevant due to their surface cation termination and the presence of heavy elements in several representative compounds. Here, we investigate the effect of SOC onto the electronic structure of 2D AgBiO3, NaBiO3, and SbTlO3. While the first two systems show negligible band renormalization upon inclusion of relativistic effects around the band gap, SbTlO3 showcases a large SOC induced splitting (229meV) for the lowest conduction bands associated with a band inversion. Substitution of Tl with Pb forming SbPbO3 brings the band-inverted feature to the Fermi level. Analysis of topological invariants and investigation of edge states of zig-zag and armchair ribbons within the 200meV gap confirms the topological nature of the band splitting. Our work thus establishes a foundation for the systematic study of robust non-van der Waals 2D topological insulators.

cond-mat.mtrl-sci↗

arXiv2025

Implementation and application of a DFT$+U$$+V$ approach within the all-electron FLAPW method

We present an implementation of the density-functional theory DFT$+U$$+V$ formalism within the all-electron full-potential linearized augmented-plane-wave (FLAPW) method as implemented in the FLEUR code. The DFT$+U$$+V$ formalism extends DFT, supplemented by the onsite Coulomb interaction $U$, to address local correlation effects in localized states by incorporating intersite Coulomb interaction terms $V$. It holds promise for improving charge and bond disproportionation, charge and orbital ordering, charge density wave formation, charge transfer, and the intersite correlation resulting from hybridization between states of neighboring sites in a solid. $U$ and $V$ parameters are obtained from first principles using the constrained random-phase approximation (cRPA) employing two different atom basis representations to project the screened Coulomb interaction: the Wannier and the muffin-tin basis functions. We investigate in detail the impact of the $V$ term for typical covalently bonded materials like graphene, for bulk semiconductors such as silicon and germanium, and for charge-transfer insulators like NiO. Our results demonstrate an improvement in accuracy of specific properties across these systems, providing a framework for describing materials with different interaction regimes. We compare our DFT$+U$$+V$ results using our cRPA parameter sets with (i) previous DFT$+U$$+V$ calculation employing pseudopotential approximations, (ii) with experimental results and (iii) with our $GW$ results.

cond-mat.mtrl-sci↗

arXiv2023

Machine Learning-based estimation and explainable artificial intelligence-supported interpretation of the critical temperature from magnetic ab initio Heusler alloys data

Machine Learning (ML) has impacted numerous areas of materials science, most prominently improving molecular simulations, where force fields were trained on previously relaxed structures. One natural next step is to predict material properties beyond structure. In this work, we investigate the applicability and explainability of ML methods in the use case of estimating the critical temperature for magnetic Heusler alloys calculated using ab initio methods determined materials-specific magnetic interactions and a subsequent Monte Carlo (MC) approach. We compare the performance of regression and classification models to predict the range of the critical temperature of given compounds without performing the MC calculations. Since the MC calculation requires computational resources in the same order of magnitude as the density-functional theory (DFT) calculation, it would be advantageous to replace either step with a less computationally intensive method such as ML. We discuss the necessity to generate the magnetic ab initio results to make a quantitative prediction of the critical temperature. We used state-of-the-art explainable artificial intelligence (XAI) methods to extract physical relations and deepen our understanding of patterns learned by our models from the examined data.

cond-mat.mtrl-sci↗

arXiv2023

Application of batch learning for boosting high-throughput ab initio success rates and reducing computational effort required using data-driven processes

The increased availability of computing time, in recent years, allows for systematic high-throughput studies of material classes with the purpose of both screening for materials with remarkable properties and understanding how structural configuration and material composition affect macroscopic attributes manifestation. However, when conducting systematic high-throughput studies, the individual ab initio calculations' success depends on the quality of the chosen input quantities. On a large scale, improving input parameters by trial and error is neither efficient nor systematic. We present a systematic, high-throughput compatible, and machine learning-based approach to improve the input parameters optimized during a DFT computation or workflow. This approach of integrating machine learning into a typical high-throughput workflow demonstrates the advantages and necessary considerations for a systematic study of magnetic multilayers of 3$d$ transition metal layers on FCC noble metal substrates. For 6660 film systems, we were able to improve the overall success rate of our high-throughput FLAPW-based structural relaxations from $64.8 \%$ to $94.3\ \%$ while at the same time requiring $17\ \%$ less computational time for each successful relaxation.

cond-mat.mtrl-sci↗

arXiv2023

Phonons from Density-Functional Perturbation Theory using the All-Electron Full-Potential Linearized Augmented Plane-Wave Method FLEUR

Phonons are quantized vibrations of a crystal lattice that play a crucial role in understanding many properties of solids. Density functional theory (DFT) provides a state-of-the-art computational approach to lattice vibrations from first-principles. We present a successful software implementation for calculating phonons in the harmonic approximation, employing density-functional perturbation theory (DFPT) within the framework of the full-potential linearized augmented plane-wave (FLAPW) method as implemented in the electronic structure package FLEUR. The implementation, which involves the Sternheimer equation for the linear response of the wave function, charge density, and potential with respect to infinitesimal atomic displacements, as well as the setup of the dynamical matrix, is presented and the specifics due to the muffin-tin sphere centered LAPW basis-set and the all-electron nature are discussed. As a test, we calculate the phonon dispersion of several solids including an insulator, a semiconductor as well as several metals. The latter are comprised of magnetic, simple, and transition metals. The results are validated on the basis of phonon dispersions calculated using the finite displacement approach in conjunction with the FLEUR code and the phonopy package, as well as by some experimental results. An excellent agreement is obtained.

cond-mat.mtrl-sci↗

arXiv2023

How to verify the precision of density-functional-theory implementations via reproducible and universal workflows

In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. We discuss here general recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z=1 to 96 and characterizing 10 prototypical cubic compounds for each element: 4 unaries and 6 oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Such effort is facilitated by deploying AiiDA common workflows that perform automatic input parameter selection, provide identical input/output interfaces across codes, and ensure full reproducibility. Finally, we discuss the extent to which the current results for total energies can be reused for different goals (e.g., obtaining formation energies).

cond-mat.mtrl-sci↗

arXiv2021

Common workflows for computing material properties using different quantum engines

The prediction of material properties through electronic-structure simulations based on density-functional theory has become routinely common, thanks, in part, to the steady increase in the number and robustness of available simulation packages. This plurality of codes and methods aiming to solve similar problems is both a boon and a burden. While providing great opportunities for cross-verification, these packages adopt different methods, algorithms, and paradigms, making it challenging to choose, master, and efficiently use any one for a given task. Leveraging recent advances in managing reproducible scientific workflows, we demonstrate how developing common interfaces for workflows that automatically compute material properties can tackle the challenge mentioned above, greatly simplifying interoperability and cross-verification. We introduce design rules for reproducible and reusable code-agnostic workflow interfaces to compute well-defined material properties, which we implement for eleven different quantum engines and use to compute three different material properties. Each implementation encodes carefully selected simulation parameters and workflow logic, making the implementer's expertise of the quantum engine directly available to non-experts. Full provenance and reproducibility of the workflows is guaranteed through the use of the AiiDA infrastructure. All workflows are made available as open-source and come pre-installed with the Quantum Mobile virtual machine, making their use straightforward.

cond-mat.mtrl-sci↗

arXiv2020

Solution to the modified Helmholtz equation for arbitrary periodic charge densities

We present a general method for solving the modified Helmholtz equation without shape approximation for an arbitrary periodic charge distribution, whose solution is known as the Yukawa potential or the screened Coulomb potential. The method is an extension of Weinert's pseudo-charge method [M. Weinert, J. Math. Phys. 22, 2433 (1981)] for solving the Poisson equation for the same class of charge density distributions. The inherent differences between the Poisson and the modified Helmholtz equation are in their respective radial solutions. These are polynomial functions, for the Poisson equation, and modified spherical Bessel functions, for the modified Helmholtz equation. This leads to a definition of a modified pseudo-charge density and modified multipole moments. We have shown that Weinert's convergence analysis of an absolutely and uniformly convergent Fourier series of the pseudo-charge density is transferred to the modified pseudo-charge density. We conclude by illustrating the algorithmic changes necessary to turn an available implementation of the Poisson solver into a solver for the modified Helmholtz equation.

physics.comp-ph↗

arXiv2018

Mixed topological semimetals driven by orbital complexity in two-dimensional ferromagnets

The concepts of Weyl fermions and topological semimetals emerging in three-dimensional momentum space are extensively explored owing to the vast variety of exotic properties that they give rise to. On the other hand, very little is known about semimetallic states emerging in two-dimensional magnetic materials, which present the foundation for both present and future information technology. Here, we demonstrate that including the magnetization direction into the topological analysis allows for a natural classification of topological semimetallic states that manifest in two-dimensional ferromagnets as a result of the interplay between spin-orbit and exchange interactions. We explore the emergence and stability of such mixed topological semimetals in realistic materials, and point out the perspectives of mixed topological states for current-induced orbital magnetism and current-induced domain wall motion. Our findings pave the way to understanding, engineering and utilizing topological semimetallic states in two-dimensional spin-orbit ferromagnets.

cond-mat.mes-hall↗

arXiv2017

Topological Nodal-line Semimetals in Two Dimensions with time-reversal symmetry breaking

Topological nodal-line semimetals (TNLSs) exhibit exotic physical phenomena due to a one-dimensional (1D) band touching line, rather than discrete (Dirac or Weyl) points. While so far proposed two-dimensional (2D) TNLSs possess closed nodal lines (NLs) only when spin-orbit coupling (SOC) is neglected, here using Na$_3$Bi trilayers as an example, we show that 2D TNLSs can been obtained from topological (crystalline) insulators (TI/TCI) by time-reversal symmetry breaking even in the presence of SOC. We further reveal that these obtained NLs are protected by crystalline mirror symmetry, while a mirror symmetry breaking perturbation opens a full gap thus giving rise to a phase transition from 2D TNLS to a quantum anomalous Hall insulator (QAHI). We thereby uncover a close correlation between various topological phases. Remarkably, a strong spin Hall effect, important for transport applications, is predicted in 2D TNLS. Finally, a Na$_2$CrBi trilayer is proposed to realize the 2D TNLS without extrinsic magnetic field. Our work not only proposes a new strategy for realizing 2D TNLSs with truely closed NLs, but also reveals potential applications of TNLS in spintronics.

cond-mat.mtrl-sci↗

arXiv2017

Two-dimensional topological nodal line semimetal in layered $X_2Y$ ($X$ = Ca, Sr, and Ba; $Y$ = As, Sb, and Bi)

In topological semimetals the Dirac points can form zero-dimensional and one-dimensional manifolds, as predicted for Dirac/Weyl semimetals and topological nodal line semimetals, respectively. Here, based on first-principles calculations, we predict a topological nodal line semimetal phase in the two-dimensional compounds $X_2Y$ ($X$=Ca, Sr, and Ba; $Y$=As, Sb, and Bi) in the absence of spin-orbit coupling (SOC) with a band inversion at the M point. The mirror symmetry as well as the electrostatic interaction, that can be engineered via strain, are responsible for the nontrivial phase. In addition, we demonstrate that the exotic edge states can be also obtained without and with SOC although a tiny gap appears at the nodal line for the bulk states when SOC is included.

cond-mat.mtrl-sci↗

arXiv2017

Robust Dual Topological Character with Spin-Valley Polarization in a Monolayer of the Dirac Semimetal Na$_3$Bi

Topological materials with both insulating and semimetal phases can be protected by crystalline (e.g. mirror) symmetry. The insulating phase, called topological crystalline insulator (TCI), has been intensively investigated and observed in three-dimensional materials. However, the predicted two-dimensional (2D) materials with TCI phase are explored much less than 3D TCIs and 2D topological insulator, while so far considered 2D TCIs almost exclusively possess a square lattice structure with the mirror Chern number $\mathcal C_{M} =-2$. Here, we predict theoretically that hexagonal monolayer of Dirac semimetal Na$_3$Bi is a 2D TCI with a mirror Chern number $\mathcal C_{M} =-1$. The large nontrivial gap of 0.31 eV is tunable and can be made much larger via strain engineering while the topological phases are robust against strain, indicating a high possibility for room-temperature observation of quantized conductance. In addition, a nonzero spin Chern number $\mathcal C_{S} =-1$ is obtained, indicating the coexistence of 2D topological insulator and 2D TCI, i.e. the dual topological character. Remarkably, a spin-valley polarization is revealed in Na$_3$Bi monolayer due to the breaking of crystal inversion symmetry. The dual topological character is further explicitly confirmed via unusual edge states' behavior under corresponding symmetry breaking.

cond-mat.mtrl-sci↗

arXiv2014

Functionalized Bismuth Films: Giant Gap Quantum Spin Hall and Valley-Polarized Quantum Anomalous Hall States

The search for new large band gap quantum spin Hall (QSH) and quantum anomalous Hall (QAH) insulators is critical for their realistic applications at room temperature. Here we predict, based on first principles calculations, that the band gap of QSH and QAH states can be as large as 1.01 eV and 0.35 eV in an H-decorated Bi(111) film. The origin of this giant band gap lies both in the large spin-orbit interaction of Bi and the H-mediated exceptional electronic and structural properties. Moreover, we find that the QAH state also possesses the properties of quantum valley Hall state, thus intrinsically realising the so-called valley-polarized QAH effect. We further investigate the realization of large gap QSH and QAH states in an H-decorated Bi(\={1}10) film and X-decorated (X=F, Cl, Br, and I) Bi(111) films.

cond-mat.mes-hall↗

arXiv2014

Quantum well states and amplified spin-dependent Friedel oscillations in thin films

Electrons mediate many of the interactions between atoms in a solid. Their propagation in a material determines its thermal, electrical, optical, magnetic and transport properties. Therefore, the constant energy contours characterizing the electrons, in particular the Fermi surface, have a prime impact on the behavior of materials. If anisotropic, the contours induce strong directional dependence at the nanoscale in the Friedel oscillations surrounding impurities. Here we report on giant anisotropic charge density oscillations focused along specific directions with strong spin-filtering after scattering at an oxygen impurity embedded in the surface of a ferromagnetic thin film of Fe grown on W(001). Utilizing density functional theory, we demonstrate that by changing the thickness of the Fe films, we control quantum well states confined to two dimensions that manifest as multiple flat energy contours, impinging and tuning the strength of the induced charge oscillations which allow to detect the oxygen impurity at large distances ($\approx$ 50nm).

cond-mat.mtrl-sci↗

arXiv2014

An Optimized and Scalable Eigensolver for Sequences of Eigenvalue Problems

In many scientific applications the solution of non-linear differential equations are obtained through the set-up and solution of a number of successive eigenproblems. These eigenproblems can be regarded as a sequence whenever the solution of one problem fosters the initialization of the next. In addition, in some eigenproblem sequences there is a connection between the solutions of adjacent eigenproblems. Whenever it is possible to unravel the existence of such a connection, the eigenproblem sequence is said to be correlated. When facing with a sequence of correlated eigenproblems the current strategy amounts to solving each eigenproblem in isolation. We propose a alternative approach which exploits such correlation through the use of an eigensolver based on subspace iteration and accelerated with Chebyshev polynomials (ChFSI). The resulting eigensolver is optimized by minimizing the number of matrix-vector multiplications and parallelized using the Elemental library framework. Numerical results show that ChFSI achieves excellent scalability and is competitive with current dense linear algebra parallel eigensolvers.

cs.MS↗

arXiv2014

Spin-caloric transport properties of cobalt nanostructures: spin disorder effects from first principles

The fundamental aspects of spin-dependent transport processes and their interplay with temperature gradients, as given by the spin Seebeck coefficient, are still largely unexplored and a multitude of contributing factors must be considered. We used density functional theory together with a Monte-Carlo-based statistical method to simulate simple nanostructures, such as Co nanowires and films embedded in a Cu host or in vacuum, and investigated the influence of spin-disorder scattering on electron transport at elevated temperatures. While we show that the spin-dependent scattering of electrons due to temperature induced disorder of the local magnetic moments contributes significantly to the resistance, thermoelectric and spin-caloric transport coefficients, we also conclude that the actual magnitude of these effects cannot be predicted, quantitatively or qualitatively, without such detailed calculations.

cond-mat.mtrl-sci↗

arXiv2013

The μ-ordinary locus for Shimura varieties of Hodge type

We review the Newton stratification and Ekedahl-Oort stratification on the special fiber of a smooth integral model for a Shimura variety of Hodge type at a prime of good reduction. We show that the μ-ordinary locus coincides with the generic Ekedahl-Oort stratum, and that for any two geometric points in the μ-ordinary locus there is an isomorphism of the attached Dieudonne modules with additional structure. As a consequence, we proof that the μ-ordinary locus is open and dense, thus generalizing the results which were already known in the PEL-case. To prove our results we provide a method which allows to reduce the equality of strata to a group theoretic statement.

math.AG↗

arXiv2012

Electronic properties of graphene nanoribbons under gate electric fields

Quantum-dot states in graphene nanoribbons (GNR) were calculated using density-functional theory, considering the effect of the electric field of gate electrodes. The field is parallel to the GNR plane and was generated by an inhomogeneous charge sheet placed atop the ribbon. Varying the electric field allowed to observe the development of the GNR states and the formation of localized, quantum-dot-like states in the band gap. The calculation has been performed for armchair GNRs and for armchair ribbons with a zigzag section. For the armchair GNR a static dielectric constant of ε approx. 4 could be determined.

cond-mat.mes-hall↗