arXiv ScienceSearch

arXiv subjects

Daniel Vincent

Publications and source records attributed to Daniel Vincent.

5 recordsLinked to original sources

Optoelectronically Active GaAs/GeSn-MQW/Ge Heterojunctions Created via Semiconductor Grafting

Traditionally, advancements in semiconductor devices have been driven by lattice-matched heterojunctions with tailored band alignments through heteroepitaxy techniques. However, there is significant interest in expanding the capabilities of heterojunction devices, in particular utilizing extreme lattice mismatches. We demonstrate the manipulation of device behaviors and performance enhancement achievable through a lattice-mismatched, single-crystalline GaAs/GeSn-multi-quantum well (MQW)/Ge n-i-p heterojunction by employing advanced semiconductor grafting technology. With engineered band alignment and optical field distribution, the grafted GaAs/GeSn-MQW/Ge n-i-p photodiode achieved outstanding performance: a record-low dark current density of 1.22E10^-7 A/cm^2, an extended spectral response from ~0.5 to 2 um, and improved photoresponsivity of RVIS of 0.85 A/W and RNIR of 0.40 A/W at 520 and 1570 nm, respectively. The dark current density is at least 5 orders of magnitude lower than state-of-the-art GeSn photodiodes. The photoresponsivity demonstrates an approximately sevenfold enhancement in the VIS range and a threefold improvement in the NIR range compared to the reference epitaxial photodiode. This work presents a unique strategy for constructing lattice-mismatched semiconductor heterojunction devices. More importantly, the implications transcend the current GaAs/GeSn-MQW/Ge example, offering potential applications in other material systems and freeing device design from the stringent lattice-matching constraints of conventional heteroepitaxy.

cond-mat.mtrl-sci

Grafted AlGaAs/GeSn Optical Pumping Laser Operating up to 130 K

Group IV GeSn double-heterostructure (DHS) lasers offer unique advantages of a direct bandgap and CMOS compatibility. However, further improvements in laser performance have been bottlenecked by limited junction properties of GeSn through conventional epitaxy and wafer bonding. This work leverages semiconductor grafting to synthesize and characterize optically pumped ridge edge-emitting lasers (EELs) with an AlGaAs nanomembrane (NM) transfer-printed onto an epitaxially grown GeSn substrate, interfaced by an ultrathin Al2O3 layer. The grafted AlGaAs/GeSn DHS lasers show a lasing threshold of 11.06 mW at 77 K and a maximum lasing temperature of 130 K. These results highlight the potential of the grafting technique for enhancing charge carrier and optical field confinements, paving the way for room-temperature electrically injected GeSn lasers.

physics.optics

Characterization of AlGaAs/GeSn heterojunction band alignment via X-ray photoelectron spectroscopy

GeSn-based SWIR lasers featuring imaging, sensing, and communications has gained dynamic development recently. However, the existing SiGeSn/GeSn double heterostructure lacks adequate electron confinement and is insufficient for room temperature lasing. The recently demonstrated semiconductor grafting technique provides a viable approach towards AlGaAs/GeSn p-i-n heterojunctions with better electron confinement and high-quality interfaces, promising for room temperature electrically pumped GeSn laser devices. Therefore, understanding and quantitatively characterizing the band alignment in this grafted heterojunction is crucial. In this study, we explore the band alignment in the grafted monocrystalline Al0.3Ga0.7As /Ge0.853Sn0.147 p-i-n heterojunction. We determined the bandgap values of AlGaAs and GeSn to be 1.81 eV and 0.434 eV by photoluminescence measurements, respectively. We further conducted X-ray photoelectron spectroscopy measurements and extracted a valence band offset of 0.19 eV and a conduction band offset of 1.186 eV. A Type-I band alignment was confirmed which effectively confining electrons at the AlGaAs/GeSn interface. This study improves our understanding of the interfacial band structure in grafted AlGaAs/GeSn heterostructure, providing experimental evidence of the Type-I band alignment between AlGaAs and GeSn, and paving the way for their application in laser technologies.

physics.app-ph

AlGaAs/GeSn p-i-n diode interfaced with ultrathin Al$_2$O$_3$

This study presents the fabrication and characterizations of an Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn p-i-n double heterostructure (DHS) diode following the grafting approach for enhanced optoelectronic applications. By integrating ultra-thin Al$_2$O$_3$ as a quantum tunneling layer and enhancing interfacial double-side passivation, we achieved a heterostructure with a substantial 1.186 eV conduction band barrier between AlGaAs and GeSn, along with a low interfacial density of states. The diode demonstrated impressive electrical characteristics with high uniformity, including a mean ideality factor of 1.47 and a mean rectification ratio of 2.95E103 at +/-2 V across 326 devices, indicating high-quality device fabrication. Comprehensive electrical characterizations, including C-V and I-V profiling, affirm the diode's capability to provide robust electrical confinement and efficient carrier injection. These properties make the Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn DHS a promising candidate for next-generation electrically pumped GeSn lasers, potentially operable at higher temperatures. Our results provide a viable pathway for further advancements in various GeSn-based devices.

physics.app-ph

XPS analysis of molecular contamination and sp2 amorphous carbon on oxidized (100) diamond

The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complicated by surface morphology and purity, which if not accounted for will yield inconsistent determination of the oxygen coverage. We present a comprehensive approach to consistently prepare and analyze oxygen termination of surfaces on (100) single-crystalline diamond. We report on X-ray Photoelectron Spectroscopy (XPS) characterization of diamond surfaces treated with six oxidation methods that include various wet chemical oxidation techniques, photochemical oxidation with UV illumination, and steam oxidation using atomic layer deposition (ALD). Our analysis entails a rigorous XPS peak-fitting procedure for measuring the functionalization of O-terminated diamond. The findings herein have provided molecular-level insights on oxidized surfaces in (100) diamond, including the demonstration of clear correlation between the measured oxygen atomic percentage and the presence of molecular contaminants containing nitrogen, silicon, and sulfur. We also provide a comparison of the sp2 carbon content with the O1s atomic percentage and discern a correlation with the diamond samples treated with dry oxidation which eventually tapers off at a max O1s atomic percentage value of 7.09 +/- 0.40%. Given these results, we conclude that the dry oxidation methods yield some of the highest oxygen amounts, with the ALD water vapor technique proving to be the cleanest technique out of all the oxidation methods explored in this work.

cond-mat.mtrl-sci