arXiv ScienceSearch

arXiv subjects

Daniel Turizo

Publications and source records attributed to Daniel Turizo.

7 recordsLinked to original sources

Making Every Bit Count for $A$-Optimal State Estimation

We study the problem of controlling how a limited communication bandwidth budget is allocated across heterogeneously quantized sensor measurements. The performance criterion is the trace of the error covariance matrix of the linear minimum mean square error (LMMSE) state estimator, i.e., an $A$-optimal design criterion. Minimizing this criterion with a bit budget constraint yields a nonconvex optimization problem. We derive a formula that reduces each evaluation of the gradient to a single Cholesky factorization. This enables efficient optimization by both a projection-free Frank-Wolfe method (with a computable convergence certificate) and an interior point method with L-BFGS Hessian approximation over the problem's continuous relaxation. A largest remainder rounding procedure recovers integer bit allocations with a bound on the quality of the rounded solution. Numerical experiments in IEEE power grid test cases with up to 300 buses compare both solvers and demonstrate that the analytic gradient is the key computational enabler for both methods. Additionally, the heterogeneous bit allocation is compared to standard uniform bit allocation on the 500 bus IEEE power grid test case.

eess.SY

Differentiating Through Power Flow Solutions for Admittance and Topology Control

The power flow equations relate bus voltage phasors to power injections via the network admittance matrix. These equations are central to the key operational and protection functions of power systems (e.g., optimal power flow scheduling and control, state estimation, protection, and fault location, among others). As control, optimization, and estimation of network admittance parameters are central to multiple avenues of research in electric power systems, we propose a linearization of power flow solutions obtained by implicitly differentiating them with respect to the network admittance parameters. This is achieved by utilizing the implicit function theorem, in which we show that such a differentiation is guaranteed to exist under mild conditions and is applicable to generic power systems (radial or meshed). The proposed theory is applied to derive sensitivities of complex voltages, line currents, and power flows. The developed theory of linearizing the power flow equations around changes in the complex network admittance parameters has numerous applications. We demonstrate several of these applications, such as predicting the nodal voltages when the network topology changes without solving the power flow equations. We showcase the application for continuous admittance control, which is used to increase the hosting capacity of a given distribution network.

eess.SY

Admittance Matrix Concentration Inequalities for Understanding Uncertain Power Networks

This paper presents conservative probabilistic bounds for the spectrum of the admittance matrix and classical linear power flow models under uncertain network parameters; for example, probabilistic line contingencies. Our proposed approach imports tools from probability theory, such as concentration inequalities for random matrices. This provides a theoretical framework for understanding error bounds of common approximations of the AC power flow equations under parameter uncertainty, including the DC and LinDistFlow approximations. Additionally, we show that the upper bounds scale as functions of nodal criticality. This network-theoretic quantity captures how uncertainty concentrates at critical nodes for use in contingency analysis. We validate these bounds on IEEE test networks, demonstrating that they correctly capture the scaling behavior of spectral perturbations up to conservative constants.

eess.SY

Discrete Shortest Paths in Optimal Power Flow Feasible Regions

Optimal power flow (OPF) is a critical optimization problem for power systems to operate at points where cost or other operational objectives are optimized. Due to the non-convexity of the set of feasible OPF operating points, it is non-trivial to transition the power system from its current operating point to the optimal one without violating constraints. On top of that, practical considerations dictate that the transition should be achieved using a small number of small-magnitude control actions. To solve this problem, this paper proposes an algorithm for computing a transition path by framing it as a shortest path problem. This problem is formulated in terms of a discretized piece-wise linear path, where the number of pieces is fixed a priori in order to limit the number of control actions. This formulation yields a nonlinear optimization problem (NLP) with a sparse block tridiagonal structure, which we leverage by utilizing a specialized interior point method. An initial feasible path for our method is generated by solving a sequence of relaxations which are then tightened in a homotopy-like procedure. Numerical experiments illustrate the effectiveness of the algorithm.

math.OC

Conditions for Estimation of Sensitivities of Voltage Magnitudes to Complex Power Injections

Voltage phase angle measurements are often unavailable from sensors in distribution networks and transmission network boundaries. Therefore, this paper addresses the conditions for estimating sensitivities of voltage magnitudes with respect to complex (active and reactive) electric power injections based on sensor measurements. These sensitivities represent submatrices of the inverse power flow Jacobian. We extend previous results to show that the sensitivities of a bus voltage magnitude with respect to active power injections are unique and different from those with respect to reactive power. The classical Newton-Raphson power flow model is used to derive a novel representation of bus voltage magnitudes as an underdetermined linear operator of the active and reactive power injections; parameterized by the bus power factors. Two conditions that ensure the existence of unique complex power injections given voltage magnitudes are established for this underdetermined linear system, thereby compressing the solution space. The first is a sufficient condition based on the bus power factors. The second is a necessary and sufficient condition based on the system eigenvalues. We use matrix completion theory to develop estimation methods for recovering sensitivity matrices with varying levels of sensor availability. Simulations verify the results and demonstrate engineering use of the proposed methods.

eess.SY

Invertibility Conditions for the Admittance Matrices of Balanced Power Systems

The admittance matrix encodes the network topology and electrical parameters of a power system in order to relate the current injection and voltage phasors. Since admittance matrices are central to many power engineering analyses, their characteristics are important subjects of theoretical studies. This paper focuses on the key characteristic of \emph{invertibility}. Previous literature has presented an invertibility condition for admittance matrices. This paper first identifies and fixes a technical issue in the proof of this previously presented invertibility condition. This paper then extends this previous work by deriving new conditions that are applicable to a broader class of systems with lossless branches and transformers with off-nominal tap ratios.

math.OC

Generator Controller Tuning Considering Stochastic Load Variation Using Analysis of Variance and Response Surface Method

This article proposes a method for generator controller tuning in a power system affected by stochastic loads. The method uses the Analysis of Variance to detect the controllers with significant effect over the quality of the system response. Such quality is measured with an objective function defined as a weighted average of the Integral Absolute Error of each controller. The significant variables are then varied over a specified region in order to characterize the objective function through a regression model, which is then optimized. The method was applied to the system IEEE14 and the results were compared with benchmark parameters, showing better performance.

eess.SY