arXiv subjects

Daniel Mutter

Publications and source records attributed to Daniel Mutter.

12 recordsLinked to original sources

arXiv2026

Influence of ligand field and correlation on the electronic structure of NiO and CoO from DFT+DMFT calculations

The intriguing physics and rich application potential of strongly correlated first-row transition metal oxide compounds result from the complex interplay of several factors that influence the electronic structure. To shed light on the effect of composition, structure, and correlation strength, we apply a well-established charge self-consistent combination of density functional theory and dynamical mean field theory, which has proven to give electron binding energies in good agreement to experimentally derived excitation spectra. For paramagnetic NiO and CoO, we analyze the effect of rock-salt and zincblende structures and their different ligand fields on the spectral functions. By varying the value of the interaction parameter U, different correlation strengths among the transition-metal 3d electrons are considered, as well as the effect of additionally accounting for correlations in the oxygen 2p orbitals by a self-interaction-correction pseudopotential scheme.

cond-mat.str-el↗

arXiv2026

High-Throughput-Screening Workflow for Predicting Volume Changes by Ion Intercalation in Battery Materials

Mechanical stresses and strains developing locally within the microstructure of active ion-battery-electrode materials during charge-discharge cycles can compromise their long-term stability. In this context, crystalline compounds exhibiting low volume changes are of particular interest. Atomistic simulations can be employed to quantify the volume change of the crystal structure upon intercalation and deintercalation of ions and to elucidate the local mechanisms underlying the global structural response. While density functional theory (DFT) offers a robust and accurate framework for such calculations, its computational cost limits its applicability for large-scale screening of diverse intercalation structures and sites. In this work, we present a workflow designed to prioritize candidate materials for subsequent detailed characterization. The workflow calculates the volume change upon intercalation using atomic-level features and a machine-learning model for bond-length prediction. The bond-length predictions are based on the assumption that bonds between the same ionic species in similar local coordination environments exhibit comparable lengths across different crystallographic structures. The model was trained on a DFT-generated dataset, which inherently defines the chemical space in which reliable predictions can be expected. We demonstrate the workflow's utility by screening approximately 1,175,000 transition-metal oxides and fluorides, followed by DFT validation of the most promising candidates. The proposed workflow enables filtering of large candidate sets and accelerates the potential discovery of low volume change intercalation materials for batteries.

cond-mat.mtrl-sci↗

arXiv2024

Diffusion behavior of Li ions in crystalline and amorphous Li-Zr-O and Li-Nb-O phases

Li containing transition metal oxides are known as good ionic conductors. Performing classical molecular dynamics simulations, the diffusion behavior of Li ions is investigated in crystalline and amorphous phases with the stoichiometries Li$_2$ZrO$_3$ and LiNbO$_3$. We first demonstrate the stability of the crystal structures for the used interatomic potential model and then analyze the amorphous phases, which result from melt-and-quench simulations, in terms of radial distribution functions. Diffusivities of Li ions in those systems are obtained from a statistical Arrhenius analysis of mean square displacement curves at different temperatures. The crystalline phase of Li$_2$ZrO$_3$ exhibits two well-defined migration mechanisms: vacancy-mediated migration is dominant below and a site exchange of Li ions above a crossover region between about 1700 and 1800 K. The latter mechanism also prevails in the amorphous phases of Li$_2$ZrO$_3$ with a strongly reduced activation energy, which is due to a smaller equilibrium separation of Li ions as in the crystal structure. This migration mechanism is found in amorphous LiNbO$_3$, too.

cond-mat.mtrl-sci↗

arXiv2023

Formation energy profiles of oxygen vacancies at grain boundaries in perovskite-type electroceramics

Oxygen vacancy formation energies play a major role in the electric field assisted abnormal grain growth of technologically relevant polycrystalline perovskite phases. The underlying effect on the atomic scale is assumed to be a redistribution of cationic and anionic point defects between grain boundaries and the bulk interior regions of the grains due to different defect formation energies in the structurally different regions, accompanied by the formation of space charge zones. Using atomistic calculations based on classical interatomic potentials, we derive and discuss optimized structures of the symmetric tilt grain boundaries $\Sigma$5(210)[001] and $\Sigma$5(310)[001], and of the asymmetric tilt grain boundary (430)[001]||(100)[001] in the electroceramic perovskite materials SrTiO$_3$, BaTiO$_3$, and BaZrO$_3$. We present profiles of oxygen vacancy formation energies across those GBs and discuss their dependence on composition and grain boundary type.

cond-mat.mtrl-sci↗

arXiv2021

Electrostatic treatment of charged interfaces in classical atomistic simulations

Artificial electrostatic potentials can be present in supercells constructed for atomistic simulations of surfaces and interfaces in ionic crystals. Treating the ions as point charges, we systematically derive an electrostatic formalism for model systems of increasing complexity, both neutral and charged, and with either open or periodic boundary conditions. This allows to correctly interpret results of classical atomistic simulations which are directly affected by the appearance of these potentials. We demonstrate our approach at the example of a strontium titanite (SrTiO$_3$) supercell containing an asymmetric tilt grain boundary. The formation energies of charged oxygen vacancies and the relaxed interface structure are calculated based on an interatomic rigid-ion potential, and the results are analyzed in consideration of the electrostatic effects.

cond-mat.mtrl-sci↗

arXiv2021

Defects and Phase Formation in Non-Stoichiometric LaFeO$_3$: a Combined Theoretical and Experimental Study

The defect chemistry of perovskite compounds is directly related to the stoichiometry and to the valence states of the transition-metal ions. Defect engineering has become increasingly popular as it offers the possibility to influence the catalytic properties of perovskites for applications in energy storage and conversion devices such as solid-oxide fuel- and electrolyzer cells. LaFeO$_3$ (LFO) can be regarded as a base compound of the family of catalytically active perovskites La$_{1-x}$A$_x$Fe$_{1-y}$B$_y$O$_{3-\delta}$, for which the defect chemistry as well as the electronic and ionic conductivity can be tuned by substitution on cationic sites. Combining theoretical and experimental approaches, we explore the suitability for A-site vacancy engineering, namely the feasibility of actively manipulating the valence state of Fe and the concentration of point defects by synthesizing La-deficient LFO. Formation energies and concentrations of point defects were determined as a function of processing conditions by first-principles DFT+U calculations. Based on the results, significant compositional deviations from stoichiometric LFO cannot be expected by providing rich or poor conditions of the oxidic precursor compounds (Fe$_2$O$_3$ and La$_2$O$_3$) in a solid-state processing route. In the experimental part, LFO was synthesized with a targeted La-site deficiency. We analyze the resulting phases by X-ray diffraction and scanning electron microscopy, (scanning) transmission electron microscopy in combination with energy-dispersive X-ray spectroscopy, and electron energy-loss spectrometry. Instead of a variation of the La/Fe ratio, a mixture of the two phases Fe$_2$O$_3$ and LFO was observed, resulting in an invariant charge state of Fe, in line with the theoretical results. We discuss our findings with respect to partly differing assumptions made in previous studies on this material system.

cond-mat.mtrl-sci↗

arXiv2021

Atomistic calculations of charged point defects at grain boundaries in SrTiO$_3$

Oxygen vacancies have been identified to play an important role in accelerating grain growth in polycrystalline perovskite-oxide ceramics. In order to advance the fundamental understanding of growth mechanisms at the atomic scale, classical atomistic simulations were carried out to investigate the atomistic structures and oxygen vacancy formation energies at grain boundaries in the prototypical perovskite-oxide material SrTiO$_3$. In this work, we focus on two symmetric tilt grain boundaries, namely $\Sigma$5(310)[001] and $\Sigma$5(210)[001]. A one-dimensional continuum model is adapted to determine the electrostatic potential induced by charged lattice planes in atomistic structure models containing grain boundaries and point defects. By means of this model, electrostatic artifacts, which are inherent to supercell models with periodic or open boundary conditions, can be taken into account and corrected properly. We report calculated formation energies of oxygen vacancies on all the oxygen sites across boundaries between two misoriented grains, and we analyze and discuss the formation-energy values with respect to local charge densities at the vacant sites.

cond-mat.mtrl-sci↗

arXiv2020

Atomistic analysis of Li migration in $\text{Li}_{1+x} \text{Al}_x \text{Ti}_{2-x} {(\text{P} \text{O}_4)}_3$ (LATP) solid electrolytes

We examine the ionic migration of Li in LATP [$\text{Li}_{1+x} \text{Al}_x \text{Ti}_{2-x} {(\text{P} \text{O}_4)}_3$] solid electrolytes from an atomistic viewpoint by means of density functional theory calculations. We vary the Al content and investigate its effects on the crystal structure of LATP and on the migration energy landscape of interstitial Li ions. The energy profiles governing the Li diffusion are found to be systematically influenced by the position of Al ions in direct vicinity of the migration path, and we derive a simplified classification scheme of three universal energy profile shapes. The overall influence of the Al/Ti-ratio on the Li migration is analyzed by a separation into chemical and geometrical aspects. This work provides a solid basis for a resource-efficient computational examination of the ionic conductivity of Li in LATP with varying Al/Ti concentrations.

cond-mat.mtrl-sci↗

arXiv2019

Computational Analysis of Composition-Structure-Property-Relationships in NZP-type Materials for Li-Ion Batteries

Compounds crystallizing in the structure of NaZr$_2$(PO$_4$)$_3$ (NZP) are considered as promising materials for solid state electrolytes in Li-ion batteries. Using density functional theory (DFT), a systematic computational screening of 18 NZP compounds, namely LiX$_2$(LO$_4$)$_3$ with X = Ti, V, Fe, Zr, Nb, Ru, Hf, Ta, Os, and L = P, Mn is performed with respect to their activation energies for vacancy-mediated Li migration. It is shown how the different ionic radii of the cationic substitutions influence structural characteristics such as the octahedron volumes around Li ions on the initial and transition state sites, which affect the activation energies (''composition-structure-property'' relationships). The prevalent assumption that structural bottlenecks formed by triangularly arranged oxygen atoms at a certain location along the migration path determine the energy barriers for Li migration is not supported by the DFT results. Instead, the ionic neighborhood of the migrating ion in the initial and in the transition state needs to be taken into account to relate the structure to the activation energies. This conclusion applies to Na containing NZP compounds as well.

cond-mat.mtrl-sci↗

arXiv2012

Simulation of the shape memory effect in a NiTi nano model system

The shape memory behavior of a NiTi nanoparticle is analyzed by molecular dynamics simulations. After a detailed description of the equilibrium structures of the used model potential, the multi variant martensitic ground state, which depends on the geometry of the particle, is discussed. Tensile load is applied, changing the variant configuration to a single domain state with a remanent strain after unloading. Heating the particle leads to a shape memory effect without a phase transition to the austenite, but by variant reorientation and twin boundary formation at a certain temperature. These processes are described by stress-strain and strain-temperature curves, together with a visualization of the microstructure of the nanoparticle. Results are presented for five different Ni concentrations in the vicinity of 50%, showing for example, that small deviations from this ideal composition can influence the critical temperature for shape recovery significantly.

cond-mat.mtrl-sci↗

arXiv2011

Simulation of the thermally induced austenitic phase transition in NiTi nanoparticles

The reverse martensitic ("austenitic") transformation upon heating of equiatomic nickel-titanium nanoparticles with diameters between 4 and 17 nm is analyzed by means of molecular-dynamics simulations with a semi-empirical model potential. After constructing an appropriate order parameter to distinguish locally between the monoclinic B19' at low and the cubic B2 structure at high temperatures, the process of the phase transition is visualized. This shows a heterogeneous nucleation of austenite at the surface of the particles, which propagates to the interior by plane sliding, explaining a difference in austenite start and end temperatures. Their absolute values and dependence on particle diameter are obtained and related to calculations of the surface induced size dependence of the difference in free energy between austenite and martensite.

cond-mat.mtrl-sci↗

arXiv2010

Simulation of structural phase transitions in NiTi

By means of molecular-dynamics simulations, temperature driven diffusionless structural phase transitions in equi- and nearly equiatomic ordered nickel-titanium alloys were investigated. For this purpose, a model potential from the literature was adopted [W.S. Lai and B.X. Liu, J. Phys. Condens. Matter 12, L53 (2000)], which is based on the tight-binding model in second moment approximation. The model predicts a stable B19' phase at low temperatures and a nearly cubic B2 phase at high temperatures. After an analysis of crystallography and energetics of the emerging structures, the experimentally known strong dependence of transition temperatures on composition is confirmed and related to lattice instability. Free energy calculations finally give insight into the driving forces of the phase transitions, and reveal free energy barriers inhibiting them below the transition temperatures.

cond-mat.mtrl-sci↗